ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

BACKGROUND:Deep muscle stimulation has the effects of releasing muscle adhesion,relieving muscle spasm,improving and restoring muscle compliance and elasticity.Electromyographic biofeedback therapy can promote nerve recovery and improve lower limb motor function and gait. OBJECTIVE:To observe the effect of the effect of deep muscle stimulation combined with electromyographic biofeedback therapy on the spasm of the triceps surae and gait changes after stroke by using a digital muscle detector and three-dimensional gait analysis system. METHODS:A total of 72 patients who met the inclusion criteria were selected from the Rehabilitation Department of the First Affiliated Hospital of Guangdong Pharmaceutical University from October 2020 to October 2023.And they were enrolled and randomly divided into two groups(n=36 per group):a control group and a combined group.The control group received routine rehabilitation therapies,electromyographic biofeedback and pseudo deep muscle stimulation,while the combined group received true deep muscle stimulation treatment on the basis of the control group,five times per week,for 4 consecutive weeks.The oscillation frequency and dynamic stiffness of the affected gastrocnemius muscle,active range of motion of the ankle dorsiflexion muscle,electromyographic signal of the tibialis anterior muscle,Fugl-Meyer assessment of the lower limbs,and three-dimensional gait analysis parameters were statistically analyzed before and after treatment in two groups. RESULTS AND CONCLUSION:After treatment,oscillation frequency and dynamic stiffness values of the inner and outer sides of the affected gastrocnemius muscle in both groups of patients were significantly reduced compared with before treatment(P<0.05),and the combined group showed a more significant decrease compared with the control group(P<0.05).The active range of motion of the ankle dorsiflexion muscle,electromyographic signal of the tibialis anterior muscle,and Fugl-Meyer scores after treatment were significantly increased or improved compared with before treatment(P<0.05),while the combined group showed a more significant increase or improvement compared with the control group(P<0.05).In terms of gait parameters,the walking speed,frequency,and stride in both groups of patients were significantly increased compared with before treatment(P<0.05),while the combined group showed a more significant increase compared with the control group(P<0.05).The percentage time of support phase on the healthy side was shortened compared with before treatment(P<0.05),while the combined group showed a more significant decrease compared with the control group(P<0.05).In addition,there was no significant difference between the two groups except for the percentage of healthy side support(P>0.05).To conclude,the combination of deep muscle stimulation and electromyographic biofeedback can effectively alleviate triceps spasm in the short term after stroke,improve ankle dorsiflexion function,enhance lower limb motor function,and improve gait.The treatment effect is significant and worthy of clinical promotion and application.

OBJECTIVE To assess the safety profile of sintilimab in combination with chemotherapy for the treatment of cholangiocarcinoma. METHODS The data of patients with cholangiocarcinoma from January 1st， 2021 to December 31st， 2022 were collected and divided into control group （29 cases） and observation group （18 cases） based on different medication regimens. Patients in the control group were treated with Gemcitabine hydrochloride for injection+Cisplatin for injection or Oxaliplatin for injection， the observation group was treated with Sintilimab injection based on the control group. Patients in each group underwent blood routine， liver and kidney function， biochemical and other examinations before and after each treatment cycle to observe the occurrence of adverse drug reactions. The correlation of adverse drug reactions with drugs was evaluated with Naranjo’s scale. RESULTS The correlation between blood toxicity and drug use was deemed “probable” in both groups； however， the observation group exhibited a significantly higher score， indicating a stronger correlation. In the control group， hepatotoxic reactions were classified as “suspicious” whereas in the observation group， they were categorized as “probable”. The correlation of gastrointestinal symptoms between the two groups was considered “possible”. Systemic symptoms， skin toxicity， musculoskeletal toxicity， endocrine toxicity and renal toxicity were all classified as having a “suspicious” correlation with drug use. The total incidence of blood toxicity in the observation group was significantly higher than control group （P＝0.014）. There was no statistically significant difference in the total incidences of hepatotoxic， gastrointestinal symptoms， systemic symptoms， skin toxicity， musculoskeletal toxicity， endocrine toxicity， renal toxicity， or the incidence of grade 3 or higher blood toxicity， hepatotoxic between the two groups （P＞0.05）. For the patients experiencing adverse drug reactions， the symptoms were alleviated following drug discontinuation or symptomatic supportive treatment. No fatalities occurred during the treatment period. CONCLUSIONS Sintilimab combined with chemotherapy may significantly increase the risk of blood toxicity in patients with cholangiocarcinoma， especially thrombocytopenia， but the adverse reactions are within a controllable range， and the overall safety is good.

In response to the clinical needs of cancer treatment and rehabilitation, Professor Lin Hongsheng proposed the Wuzhi Wuyang (five treatments and rehabilitation) concept on the basis of years of clinical experience and the Guben Qingyuan (consolidate the foundation and clear the source) theory. Wuzhi Wuyang emphasizes the importance of treatment and rehabilitation and aims to provide personalized and stage-specific treatment and rehabilitation plans by integrating the advantages of traditional Chinese medicine (TCM) and modern medicine to achieve comprehensive life-cycle management for patients with cancer. The proposal of Wuzhi Wuyang has provided new ideas and methods for the treatment, prevention, and rehabilitation of cancer, along with valuable references for clinical practice and academic research. This article summarizes the connotation of Wuzhi Wuyang and its application in the comprehensive management of cancer prevention and treatment with TCM.

In 2022， Hainan provincial government launched the project for the prevention and control of viral hepatitis with the goals of a hepatitis B screening rate of 90%， a diagnostic rate of 90%， and a treatment rate of 80% among people aged 18 years and above by the year 2025， and the main intervention measures include population-based prevention， case screening， antiviral therapy， and health management. As of December 31， 2024， a total of 6.875 million individuals in the general population had been screened for hepatitis B， with a screening rate of 95.6%. A total of 184 710 individuals with positive HBsAg were identified， among whom 156 772 were diagnosed through serological reexamination， resulting in a diagnostic rate of 84.9%. A total of 50 742 patients with chronic hepatitis B were identified， among whom 42 921 had hepatitis B-specific health records established for health management， with a file establishment rate of 84.6%. A total of 31 553 individuals received antiviral therapy， with a treatment rate of 62.2%. A total of 2.503 million individuals at a high risk of hepatitis C were screened， among whom 4 870 tested positive for HCV antibody and 3 858 underwent HCV RNA testing， resulting in a diagnostic rate of 79.2%， and 1 824 individuals with positive HCV RNA were identified， among whom 1 194 received antiviral therapy， with a treatment rate of 65.5%. In addition， 159 301 individuals with negative HBsAg and anti-HBs and an age of 20 — 40 years were inoculated with hepatitis B vaccine free of charge. Through the implementation of the project for the prevention and control of viral hepatitis， a large number of hepatitis patients have been identified， treated， and managed in the province within a short period of time， which significantly accelerates the efforts to eliminate the crisis of viral hepatitis.