To evaluate the effectiveness and safety of implantable D-shant atrial shunt device in patients with severe pulmonary arterial hypertension(PAH)and right heart failure.A 53-year-old female patient diagnosed with severe idiopathic PAH and right heart failure,her WHO FC grade was Ⅳ.The right heart catheter and implantation of D-shant atrial shunt device were performed under local anesthesia on November 30,2021.A 6 mm×4 cm peripheral artery balloon was selected to dilate the atrial septum and a D-shant atrial shunt device with a fixed 4 mm diameter orifice was implanted into the heart.The clinical symptoms and hemodynamics of the patient was improved after the intervention.Implantation of atrial shunt device as a palliative therapy to established a right to left shunt is another strategy for treating patients with severe PAH in late period,which has good effectiveness and safety.It could be the last replacement therapy to improve symptoms and prolonged lives to drug resistant and severe PAH patients.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective To investigate the risk factors for bronchopulmonary dysplasia(BPD)in twin preterm infants with a gestational age of<34 weeks,and to provide a basis for early identification of BPD in twin preterm infants in clinical practice.Methods A retrospective analysis was performed for the twin preterm infants with a gestational age of<34 weeks who were admitted to 22 hospitals nationwide from January 2018 to December 2020.According to their conditions,they were divided into group A(both twins had BPD),group B(only one twin had BPD),and group C(neither twin had BPD).The risk factors for BPD in twin preterm infants were analyzed.Further analysis was conducted on group B to investigate the postnatal risk factors for BPD within twins.Results A total of 904 pairs of twins with a gestational age of<34 weeks were included in this study.The multivariate logistic regression analysis showed that compared with group C,birth weight discordance of>25%between the twins was an independent risk factor for BPD in one of the twins(OR=3.370,95%CI:1.500-7.568,P<0.05),and high gestational age at birth was a protective factor against BPD(P<0.05).The conditional logistic regression analysis of group B showed that small-for-gestational-age(SGA)birth was an independent risk factor for BPD in individual twins(OR=5.017,95%CI:1.040-24.190,P<0.05).Conclusions The development of BPD in twin preterm infants is associated with gestational age,birth weight discordance between the twins,and SGA birth.

Licorice-gypsum (gancao-shigao, GC-SG) drug pair was used as the research object, using supramolecular chemistry to explore the scientific connotation of combining herbal medicine GC with insoluble mineral medicine SG in clinical application of traditional Chinese medicine. ① The Tyndall effect, microscopic morphology and particle size of the single and co-decocted of GC and SG were observed, the paste content and conductivity were determined, and the interaction between GC and SG was detected by isothermal titration calorimetry (ITC) and infrared absorption spectroscopy (IR). ② Calcium chloride (CaCl₂), a soluble calcium salt of equal gypsum quality, was used instead of SG with GC for co-decocting to explore the effect of calcium salt content on the water decocting, and the characteristics were combined with the Tyndall effect, microscopic morphology, paste content and conductivity. ITC and IR techniques were used to detect the interaction between the two, and the interaction between them was detected by ITC and IR. The zeta potential and ultraviolet-visible spectrophotometry (UV-vis) of GC-SG and GC-CaCl₂ co-decoction were compared, and the inorganic and organic components in the co-decoction were detected by inductively coupled plasma optical emission spectrometer (ICP-OES) and high performance liquid chromatography (HPLC). The results showed: ① Compared with the liquid phase of single decoction, GC-SG co-decoction had more obvious Tyndall effect, and showed uniform spherical nanoparticles under electron microscope. Physical characterization results such as paste content and conductivity showed that co-decoction promoted the dissolution of each other's components; ITC and IR results showed that there was strong interaction between GC and SG, which preliminatively indicated that GC and SG co-decoction promoted the formation of uniform and stable supramolecular system of traditional Chinese medicine. ② When soluble calcium salt was used to substitute insoluble SG with GC for co-decocting, a stronger but astigmatic light path appeared than single decocting solution, the zeta potential was reduced, and a large number of accumulated polymers were formed. The results of paste content and conductivity showed that the dissolution of the co-decocting component was reduced than the single decocting component. ITC, UV-vis and IR results showed that there was interaction between GC with Ca²⁺ and SG. The formation of polysink indicated that a large amount of soluble calcium salt would destroy the stability of supramolecular Chinese medicine. The results of ICP-OES and HPLC showed that the glycyrrhizic acid (GA) content of the former lower than the latter, which was related to the formation of a large number of polycondensates with the increase of Ca²⁺ concentration and the decrease of the dissolution of GA and other active ingredients. This study indicates that the compatibility of GC and SG can form a uniform and stable supramolecular system of traditional Chinese medicine. Calcium salt, the main component of SG, is taken as the starting point. Excessive soluble Ca²⁺ can promote the aggregation of active ingredients such as GA, so as to reveal the scientific connotation of the compatibility of GC and SG, an insoluble mineral medicine.

ObjectiveGlutathione (γ-glutamyl-L-cysteinylglycine, GSH) is the most abundant non-protein compound containing sulfhydryl (―SH) groups in cells. It serves as a source of reducing equivalents, effectively neutralizing harmful reactive substances, and playing a crucial role in maintaining cellular redox balance. Therefore, sensitive detection and accurate measurement of GSH levels in tissues are of great importance. In this work, we presents a novel method for GSH detection utilizing electron paramagnetic resonance (EPR) spectroscopy. MethodsInitially, ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate acid)) solution was mixed with K₂S₂O₈ solution and reacted in the dark for 12 to 16 h to prepare ABTS·⁺ solution, which was then quantified using UV-Vis spectroscopy. Subsequently, the concentration of glutathione (GSH) was determined based on the changes in the EPR signal of ABTS·⁺. On this basis, the optimal reaction time and temperature were explored to establish a standard equation correlating the EPR signal intensity of ABTS·⁺ with GSH concentration. Finally, the derived standard curve was employed to quantitatively analyze the GSH concentration in whole blood from C57BL/6J mice, and the results were compared with those reported in the literature to verify the accuracy of the method. ResultsThe experimental results demonstrate that this method has a linear detection range from50 nmol/L to 15 μmol/L for GSH, spanning two orders of magnitude, with a limit of detection (LOD) at0.50 nmol/L. The measured GSH content in mouse whole blood is (10 660±706) nmol/g Hb, which agrees with the value of (11 200±237) nmol/g Hb as previously reported. Furthermore, a similar method was developed for detection of glutathione disulfide (GSSG) at higher reaction temperature. ConclusionThis article presents a novel assay for the rapid detection of GSH using the intensity of EPR signal from ABTS·⁺ as indicator. This method demonstrates enhanced detection sensitivity and a broader linear range compared to conventional colorimetric methods. Furthermore, we have extended the application of this method to detect GSH content in blood samples efficiently and accurately, offering valuable information for assessing tissue redox balance, thus holding significant potentials.

Purpose::Head injury criterion (HIC) companied by a rotation-based metric was widely believed to be helpful for head injury prediction in road traffic accidents. Recently, the Euro-New Car Assessment Program utilized a newly developed metric called diffuse axonal multi-axis general evaluation (DAMAGE) to explain test device for human occupant restraint (THOR) head injury, which demonstrated excellent ability in capturing concussions and diffuse axonal injuries. However, there is still a lack of comprehensive understanding regarding the effectiveness of using DAMAGE for Hybrid III 50th percentile male dummy (H50th) head injury assessment. The objective of this study is to determine whether the DAMAGE could capture the risk of H50th brain injury during small overlap barrier tests.Methods::To achieve this objective, a total of 24 vehicle crash loading curves were collected as input data for the multi-body simulation. Two commercially available mathematical dynamic models, namely H50th and THOR, were utilized to investigate the differences in head injury response. Subsequently, a decision method known as simple additive weighting was employed to establish a comprehensive brain injury metric by incorporating the weighted HIC and either DAMAGE or brain injury criterion. Furthermore, 35 sets of vehicle crash test data were used to analyze these brain injury metrics.Results::The rotational displacement of the THOR head is significantly greater than that of the H50th head. The maximum linear and rotational head accelerations experienced by H50th and THOR models were (544.6 ± 341.7) m/s 2, (2468.2 ± 1309.4) rad/s 2 and (715.2 ± 332.8) m/s 2, (3778.7 ± 1660.6) rad/s 2, respectively. Under the same loading condition during small overlap barrier (SOB) tests, THOR exhibits a higher risk of head injury compared to the H50th model. It was observed that the overall head injury response during the small overlap left test condition is greater than that during the small overlap right test. Additionally, an equation was formulated to establish the necessary relationship between the DAMAGE values of THOR and H50th. Conclusion::If H50th rather than THOR is employed as an evaluation tool in SOB crash tests, newly designed vehicles are more likely to achieve superior performance scores. According to the current injury curve for DAMAGE and brain injury criterion, it is highly recommended that HIC along with DAMAGE was prioritized for brain injury assessment in SOB tests.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.