Objective To explore the influencing factors of acute kidney injury in severe burn patients,and to construct a visual risk nomogram model.Methods A total of 390 patients with severe burn admitted to the Institute of Burn Frostbite and Tissue Function Reconstruction of Chinese People's Armed Police Force Specialty Medical Center from January 2018 to January 2022 were collected as an internal training data set,and 50 patients with severe burn admitted from February to December 2022 were collected as an external validation data set.The 390 patients of the internal training data set were divided into the acute kidney injury group and the non-acute kidney injury group according to the occurrence of acute kidney injury,and the baseline data of patients in the two groups were compared.Univariate and multivariate Logistic regression were used to analyze the risk factors of acute kidney injury in severe burn patients of the internal training data set,and a nomogram model was drawn.Subsequently,the model was verified both internally and externally.Kaplan-Meier analysis and Log-rank test were used to compare the 90-day survival rate of patients between the acute kidney injury group and the non-acute kidney injury group.Results The burn area(OR=1.18,95%CI:1.06 to 2.36,P=0.004),sequential organ failure assessment(SOFA)score(OR=1.81,95%CI:1.21 to 5.92,P<0.001),inhalation injury(OR=3.21,95%CI:1.23 to 6.35,P<0.001),neutrophil to lymphocyte ratio(NLR)(OR=1.22,95%CI:1.05 to 3.65,P<0.001)and albumin(ALB)(OR=0.78,95%CI:0.57 to 0.92,P=0.011)were the independent risk factors for the development of acute kidney injury in severe burn patients.The nomogram model was established by the above factors.The area under the receiver operating characteristic curve(AUC)of the internal training data set was 0.833(95%CI:0.752 to 0.935),the sensitivity was 81.2%,and the specificity was 83.2%.The AUC of the external validation data set was 0.842(95%CI:0.762 to 0.912),the sensitivity 87.2%,and the specificity was 78.7%.The 90-day survival rate of patients in the acute kidney injury group after burns was significantly lower than that in the non-acute kidney injury group(P<0.001).Conclusion Larger burn area,higher SOFA score,combined inhalation injury,increased NLR,and decreased ALB level are the risk factors for the occurrence of acute kidney injury in severe burn patients,which are related to the 90-day survival rate of patients after burns.The nomogram model based on the risk factors can provide certain reference for clinical individualized prevention and treatment of acute kidney injury in severe burn patients.

Objective To explore the influencing factors of acute kidney injury in severe burn patients,and to construct a visual risk nomogram model.Methods A total of 390 patients with severe burn admitted to the Institute of Burn Frostbite and Tissue Function Reconstruction of Chinese People's Armed Police Force Specialty Medical Center from January 2018 to January 2022 were collected as an internal training data set,and 50 patients with severe burn admitted from February to December 2022 were collected as an external validation data set.The 390 patients of the internal training data set were divided into the acute kidney injury group and the non-acute kidney injury group according to the occurrence of acute kidney injury,and the baseline data of patients in the two groups were compared.Univariate and multivariate Logistic regression were used to analyze the risk factors of acute kidney injury in severe burn patients of the internal training data set,and a nomogram model was drawn.Subsequently,the model was verified both internally and externally.Kaplan-Meier analysis and Log-rank test were used to compare the 90-day survival rate of patients between the acute kidney injury group and the non-acute kidney injury group.Results The burn area(OR=1.18,95%CI:1.06 to 2.36,P=0.004),sequential organ failure assessment(SOFA)score(OR=1.81,95%CI:1.21 to 5.92,P<0.001),inhalation injury(OR=3.21,95%CI:1.23 to 6.35,P<0.001),neutrophil to lymphocyte ratio(NLR)(OR=1.22,95%CI:1.05 to 3.65,P<0.001)and albumin(ALB)(OR=0.78,95%CI:0.57 to 0.92,P=0.011)were the independent risk factors for the development of acute kidney injury in severe burn patients.The nomogram model was established by the above factors.The area under the receiver operating characteristic curve(AUC)of the internal training data set was 0.833(95%CI:0.752 to 0.935),the sensitivity was 81.2%,and the specificity was 83.2%.The AUC of the external validation data set was 0.842(95%CI:0.762 to 0.912),the sensitivity 87.2%,and the specificity was 78.7%.The 90-day survival rate of patients in the acute kidney injury group after burns was significantly lower than that in the non-acute kidney injury group(P<0.001).Conclusion Larger burn area,higher SOFA score,combined inhalation injury,increased NLR,and decreased ALB level are the risk factors for the occurrence of acute kidney injury in severe burn patients,which are related to the 90-day survival rate of patients after burns.The nomogram model based on the risk factors can provide certain reference for clinical individualized prevention and treatment of acute kidney injury in severe burn patients.

Aim To prepare prostate cancer exosomes containing melittin and observe their uptake by prostate cancer cells. Methods Cells treated with starvation for different time were screened for exosome extraction. Exosomes from PC-3 cells were extracted by ultracentrifugation, and the extracted particles were examined by transmission electron microscopy, nanoparticle tracking analyzer(NTA), and Western blot. Melittin exosome system was prepared by repeated freeze-thaw method, incubation at room temperature as well as electroporation, and the size of encapsulation efficiency was measured by centrifugation. A high-performance liquid chromatography(HPLC)method was applied to assay the content of melittin exosomes(exo-mel). Fluorescence inverted microscopy was employed to evaluate the uptake of melittin exosomes by PC-3 cells, DU145 cells as well as LNCaP cells. Results The results of starvation treatment showed that 24 h starvation treatment was the optimal time point. TEM results showed that the exosomes were round or oval in shape with a distinct membranous structure, and the diameter was around 100 nm. The reagent protein concentration for NTA analysis of exosomes was 0.222 g·L-1. The results of Western blot for the marker proteins of exosomes showed that Alix and CD63 were positively expressed, which indicated that the exosomes could be obtained by starvation culture of PC-3 cells and ultracentrifugation. The results of entrapment efficiency showed that the entrapment efficiency of electroporation method was 17.51% ± 2.39%, that of repeated freeze-thaw method was 11.46% ± 1.02%, and that of room temperature incubation method was 3.93% ± 2.44%. The encapsulation efficiency of electroporation was the highest with significant difference(P<0.05). The uptake assay showed that PC-3 cells could efficiently take up exo-mel in a time-dependent manner, and DU145 cells and LNCaP cells also could take up exo-mel over time. Conclusions Exosomes can be accessed by starvation treatment and high-speed centrifugation, and the prostate cancer melittin exosome system prepared by electroporation method could be taken up by prostate cancer cells.

The pharmaceutical manufacturing model is gradually changing from intermittent manufacturing to continuous manufacturing and intelligent manufacturing. This paper briefly reviewed the supervision and research progress in continuous pharmaceutical manufacturing in China and abroad and described the definition and advantages of continuous pharmaceutical manufacturing. The continuous manufacturing of traditional Chinese medicine(TCM) at the current stage was summarized in the following three terms: the enhancement of the continuity of intermittent manufacturing operations, the integration of continuous equipment to improve physical continuity between units, and the application of advanced process control strategies to improve process continuity. To achieve continuous manufacturing of TCM, the corresponding key technologies, such as material property characterization, process modeling and simulation, process analysis technology, and system integration, were analyzed from the process and equipment, respectively. It was proposed that the continuous manufacturing equipment system should have the characteristics of high speed, high response, and high reliability, "three high(H~3)" for short. Considering the characteristics and current situation of TCM manufacturing, based on the two dimensions of product quality control and production efficiency, a maturity assessment model for continuous manufacturing of TCM, consisting of operation continuity, equipment continuity, process continuity, and quality control continuity, was proposed to provide references for the application of continuous manufacturing technology for TCM. The implementation of continuous manufacturing or the application of key continuous manufacturing technologies in TCM can help to systematically integrate advanced pharmaceutical technology elements and promote the uniformity of TCM quality and the improvement of production efficiency.
Medicine, Chinese Traditional ; Reproducibility of Results ; China ; Quality Control ; Pharmaceutical Preparations

In the context of Pharma 4.0, the design tools that support the pharmaceutical Quality by Design(QbD) are iterating fast toward intelligent or smart design. The conventional development methods for traditional Chinese medicine(TCM) preparations have the limitations such as over dependence on experience, low dimensions for the designed experiment parameters, poor compatibility between the process and equipment, and high trial-and-error cost during process scale-up. Therefore, this paper innovatively proposed the intelligent co-design involving material, process, and equipment for manufacturing high-quality TCM preparations, and introduced the design philosophy, targets, tools, and applications with TCM oral solid dosage(OSD) as an example. In terms of design philosophy, the pharmaceutical design tetrahedron composed of critical material attributes, critical process parameters, critical equipment attributes, and critical quality attributes was developed. The design targets were put forward based on the product performance classification system. The design tools involve a design platform that contains several modules, such a as the iTCM material database, the processing route classification system, the system modeling and simulation, and reliability-based optimization. The roles of different modules in obtaining essential and universal design knowledge of the key common manufacturing units were introduced. At last, the applications of the co-design methodology involving material, process, and equipment in the high shear wet granulation process development and the improvement of the dissolving or dispersion capability of TCM formula granules are illustrated. The research on advanced pharmaceutical design theory and methodology will help enhance the efficiency and reliability of drug development, improve the product quality, and promote the innovation of high-end TCM products across the industry.
Medicine, Chinese Traditional ; Reproducibility of Results ; Quality Control ; Computer Simulation ; Commerce ; Pharmaceutical Preparations ; Drugs, Chinese Herbal

Solubility is an important sensory quality attribute of traditional Chinese medicine(TCM) granules. In this paper, 90 batches of granules(30 batches of TCM formula granules, 30 batches of Chinese patent medicine granules and 30 batches of Japanese Kampo granules) were used as the research objects. The turbidity sensor was used to characterize the turbidity curve of the granule dissolution process. The classification system of granule dissolution behaviors was constructed from three dimensions: dissolution degree, equilibrium time, and dissolution mechanism. According to the equilibrium time, the granule dissolution rates were divided into three categories : faster(<100 s), general(101-300 s) and slow(>301 s). According to the turbidity curve profile, the granule dissolution mechanisms were classified into dissolution-controlled type(α-type), dispersion-controlled type(β-type), and dispersion-controlled type followed by dissolution-controlled type(γ-type). The proportion of TCM formula granules, Chinese patent medicine granules and Japanese Kampo granules with complete dissolution or slight turbidity at the end of dissolution was 46.7%, 96.7%, and 10.0%. The proportion of TCM formula granules, Chinese patent medicine granules, and Japanese Kampo granules with faster dissolution rates(<100 s) was 23.3%, 26.7%, and 40.0%. The average dissolution rate of Japanese Kampo granules was faster than that of TCM formula granules, and it was slightly faster than the average dissolution rate of Chinese patent medicine granules. The dissolution mechanism of Chinese patent medicine granules was mainly α-type, while that of Japanese Kampo granules was mainly β-type, and the three types of dissolution mechanisms of TCM formula granules accounted for a relatively average. The purpose of improving the solubility and dispersion of granules can be achieved by combining the comprehensive application of various functional excipients with the small dosage of Japanese Kampo granules and the wide addition scope of excipients. In the process of transforming TCM compound prescriptions into formulas, there is still much room for innovation in formula excipients and process optimization.
Medicine, Chinese Traditional ; Drugs, Chinese Herbal ; Excipients ; Solubility ; Nonprescription Drugs ; Biological Products

OBJECTIVE: To retrospectively analyze the laborotary test results and clinical data of 31 patients with mixed phenotype acute leukemia (MPAL) in order to summarize and discuss the biological characteristics, curative effect, and prognosis of each subtype of MPAL based on immunophenotype results. METHODS: MPAL patients diagnosed and treated in our hospital from July 2013 to January 2019 were selected to analyze the data of cell morphology, immunophenotyping, cytogenetics, molecular biology (MICM), and routine blood at initial diagnosis. Follow-up was carried out until the last discharge time. RESULTS: Among 31 patients, there were 19 males and 12 females, with a median age of 41(12-76) years old. According to the results of immunophenotyping and EGIL score, there were 16 cases of myeloid-T lymphoid mixed phenotype (myeloid-T group), 9 cases of myeloid-B lymphoid mixed phenotype (myeloid-B group), 5 cases of T-B lymphoid mixed phenotype (T-B group), and 1 case of myeloid-T-B lymphoid mixed phenotype. Compared between different subtypes, the antigen expression characteristics were the highest positive rate and expression rate of HLA-DR in myeloid-B group, and the positive rate of CD2 in T-B group was significantly higher than that in the myeloid-T group. Meanwhile, the expression rates of CD7 and cCD3 (cytoplasmic CD3) in T-B group were higher than those in myeloid-T group, and cCD79a was positive in all cases of myeloid-B group and T-B group. The median WBC of T-B group was 81.92×10⁹/L, which was significantly higher than that of the other two groups (P<0.05). The quantitative results of WT1 were higher than 10^-4 in 92.6% of the patients, and the WT1 expression level in myeloid-B group was significantly lower than the other two groups (P<0.01). Among the 9 patients with myeloid-B mixed phenotype, 5 cases showed BCR-ABL positive. Among 28 patients followed up, 21 cases achieved complete remission (CR), the median time to first obtain CR was 32.5(9-75) days, and the median follow-up time was 16 months (range from 21 days to 6 years). The CR rate and median overall survival (OS) time in myeloid-B group were 88.9% and 40 months, which were higher than the other two groups. The CR rate and 3-year OS rate in T-B group were relatively lower (50.0%, 0). CONCLUSION WT1 gene is highly expressed in patients with MPAL, and each subgroup of MPAL based on immuophenotype has its unique antigen expression characteristics. Compared with myeloid-T group and T-B group, myeloid-B group can acquire higher remission rate and have better prognosis.
Acute Disease ; Female ; HLA-DR Antigens ; Humans ; Immunophenotyping ; Leukemia ; Male ; Phenotype ; Prognosis ; Retrospective Studies

BACKGROUND: Shenyankangfu Tablet (SYKFT) is a Chinese patent medicine that has been used widely to decrease proteinuria and the progression of chronic kidney disease. OBJECTIVE: This trial compared the efficacy and safety of SYKFT, for the control of proteinuria in primary glomerulonephritis patients, against the standard drug, losartan potassium. DESIGN, SETTING, PARTICIPANTS AND INTERVENTION: This was a multicenter, double-blind, randomized, controlled clinical trial. Primary glomerulonephritis patients, aged 18-70 years, with blood pressure ≤ 140/90 mmHg, estimated glomerular filtration rate (eGFR) ≥ 45 mL/min per 1.73 m MAIN OUTCOME MEASURES: The primary outcome was change in the 24-hour proteinuria level, after 48 weeks of treatment. RESULTS: A total of 735 participants were enrolled. The percent decline of urine protein quantification in the SYKFT group after 48 weeks was 8.78% ± 2.56% (P = 0.006) more than that in the losartan 50 mg group, which was 0.51% ± 2.54% (P = 1.000) less than that in the losartan 100 mg group. Compared with the losartan potassium 50 mg group, the SYKFT plus losartan potassium 50 mg group had a 13.39% ± 2.49% (P < 0.001) greater reduction in urine protein level. Compared with the losartan potassium 100 mg group, the SYKFT plus losartan potassium 100 mg group had a 9.77% ± 2.52% (P = 0.001) greater reduction in urine protein. With a superiority threshold of 15%, neither was statistically significant. eGFR, serum creatinine and serum albumin from the baseline did not change statistically significant. The average change in TCM syndrome score between the patients who took SYKFT (-3.00 [-6.00, -2.00]) and who did not take SYKFT (-2.00 [-5.00, 0]) was statistically significant (P = 0.003). No obvious adverse reactions were observed in any group. CONCLUSION: SYKFT decreased the proteinuria and improved the TCM syndrome scores of primary glomerulonephritis patients, with no change in the rate of decrease in the eGFR. SYKFT plus losartan potassium therapy decreased proteinuria more than losartan potassium therapy alone. TRIAL REGISTRATION NUMBER NCT02063100 on ClinicalTrials.gov.