OBJECTIVE: To compare the biomechanical properties of four internal fixation methods in a lower cervical spine injury model using the finite element method. METHODS: Cervical CT data of a 28-year-old healthy adult male were utilized to establish a finite element model of the normal cervical spine and a lower cervical spine three-column injury model. Four internal fixation methods were then applied to the three-column injury model, resulting in four groups:Group A, anterior cervical locked-plate(ACLP) fixation system model(anterior approach);Group B, posterior cervical pedicle screw fixation model (posterior approach);Group C, combined anterior and posterior cervical pedicle screw fixation model; Group D, Novel composite anterior cervical internal fixation model. A 75 N axial compressive load and a 1.0 N·m pure moment were applied to the upper surface of the cervical spine model to simulate flexion, extension, rotation, and lateral bending movements. The intervertebral range of motion(ROM) and stress distribution of the internal fixators under different motion conditions were compared across all models. RESULTS: Compared with the normal model, the reductions in overall intervertebral ROM for each group under flexion, extension, rotation, and lateral bending were as follows:Group A, 24.04°, 23.12°, 6.24°, and 9.06°;Group B, 24.42°, 24.34°, 6.48°, and 9.20°;Group C, 25.43°, 25.29°, 7.17°, and 9.57°;Group D, 24.75°, 25.5°, 6.71°, and 9.12°. The peak stress values of the internal fixators in each group were:Group A, 53.9 MPa, 79.9 MPa, 61.4 MPa, and 80.3 MPa;Group B, 218.3 MPa, 105.4 MPa, 206.6 MPa, and 186.8 MPa;Group C, 40.8 MPa, 97.2 MPa, 47.1 MPa, and 39.4 MPa;Group D, 93.0 MPa, 144.0 MPa, 64.8 MPa, and 106.3 MPa. CONCLUSION The biomechanical properties of the novel composite anterior cervical internal fixation method are similar to those of the combined anterior-posterior fixation method, and superior to both the anterior cervical ACLP plate-screw fixation and posterior cervical pedicle screw fixation methods.
Humans ; Finite Element Analysis ; Cervical Vertebrae/physiopathology* ; Male ; Biomechanical Phenomena ; Adult ; Fracture Fixation, Internal/methods* ; Range of Motion, Articular

Apical microsurgery is accurate and minimally invasive, produces few complications, and has a success rate of more than 90%. However, due to the lack of awareness and understanding of apical microsurgery by dental general practitioners and even endodontists, many clinical problems remain to be overcome. The consensus has gathered well-known domestic experts to hold a series of special discussions and reached the consensus. This document specifies the indications, contraindications, preoperative preparations, operational procedures, complication prevention measures, and efficacy evaluation of apical microsurgery and is applicable to dentists who perform apical microsurgery after systematic training.
Microsurgery/standards* ; Humans ; Apicoectomy ; Contraindications, Procedure ; Tooth Apex/diagnostic imaging* ; Postoperative Complications/prevention & control* ; Consensus ; Treatment Outcome

Pulpotomy, which belongs to vital pulp therapy, has become a strategy for managing pulpitis in recent decades. This minimally invasive treatment reflects the recognition of preserving healthy dental pulp and optimizing long-term patient-centered outcomes. Pulpotomy is categorized into partial pulpotomy (PP), the removal of a partial segment of the coronal pulp tissue, and full pulpotomy (FP), the removal of whole coronal pulp, which is followed by applying the biomaterials onto the remaining pulp tissue and ultimately restoring the tooth. Procedural decisions for the amount of pulp tissue removal or retention depend on the diagnostic of pulp vitality, the overall treatment plan, the patient's general health status, and pulp inflammation reassessment during operation. This statement represents the consensus of an expert committee convened by the Society of Cariology and Endodontics, Chinese Stomatological Association. It addresses the current evidence to support the application of pulpotomy as a potential alternative to root canal treatment (RCT) on mature permanent teeth with pulpitis from a biological basis, the development of capping biomaterial, and the diagnostic considerations to evidence-based medicine. This expert statement intends to provide a clinical protocol of pulpotomy, which facilitates practitioners in choosing the optimal procedure and increasing their confidence in this rapidly evolving field.
Humans ; Calcium Compounds/therapeutic use* ; Consensus ; Dental Pulp ; Dentition, Permanent ; Oxides/therapeutic use* ; Pulpitis/therapy* ; Pulpotomy/standards*

Intentional tooth replantation (ITR) is an advanced treatment modality and the procedure of last resort for preserving teeth with inaccessible endodontic or resorptive lesions. ITR is defined as the deliberate extraction of a tooth; evaluation of the root surface, endodontic manipulation, and repair; and placement of the tooth back into its original socket. Case reports, case series, cohort studies, and randomized controlled trials have demonstrated the efficacy of ITR in the retention of natural teeth that are untreatable or difficult to manage with root canal treatment or endodontic microsurgery. However, variations in clinical protocols for ITR exist due to the empirical nature of the original protocols and rapid advancements in the field of oral biology and dental materials. This heterogeneity in protocols may cause confusion among dental practitioners; therefore, guidelines and considerations for ITR should be explicated. This expert consensus discusses the biological foundation of ITR, the available clinical protocols and current status of ITR in treating teeth with refractory apical periodontitis or anatomical aberration, and the main complications of this treatment, aiming to refine the clinical management of ITR in accordance with the progress of basic research and clinical studies; the findings suggest that ITR may become a more consistent evidence-based option in dental treatment.
Humans ; Tooth Replantation/methods* ; Consensus ; Periapical Periodontitis/surgery*

OBJECTIVE: To assess the independent and combined effects of air pollutants, meteorological factors, and greenspace exposure on new tuberculosis (TB) cases. METHODS: TB case data from Shanghai (2013-2018) were obtained from the Shanghai Center for Disease Control and Prevention. Environmental data on air pollutants, meteorological variables, and greenspace exposure were obtained from the National Tibetan Plateau Data Center. We employed a distributed-lag nonlinear model to assess the effects of these environmental factors on TB cases. RESULTS: Increased TB risk was linked to PM _2.5, PM ₁₀, and rainfall, whereas NO ₂, SO ₂, and air pressure were associated with a reduced risk. Specifically, the strongest cumulative effects occurred at various lags: PM _2.5 ( RR = 1.166, 95% CI: 1.026-1.325) at 0-19 weeks; PM ₁₀ ( RR = 1.167, 95% CI: 1.028-1.324) at 0-18 weeks; NO ₂ ( RR = 0.968, 95% CI: 0.938-0.999) at 0-1 weeks; SO ₂ ( RR = 0.945, 95% CI: 0.894-0.999) at 0-2 weeks; air pressure ( RR = 0.604, 95% CI: 0.447-0.816) at 0-8 weeks; and rainfall ( RR = 1.404, 95% CI: 1.076-1.833) at 0-22 weeks. Green space exposure did not significantly impact TB cases. Additionally, low temperatures amplified the effect of PM _2.5 on TB. CONCLUSION Exposure to PM _2.5, PM ₁₀, and rainfall increased the risk of TB, highlighting the need to address air pollutants for the prevention of TB in Shanghai.
China/epidemiology* ; Humans ; Air Pollutants/analysis* ; Tuberculosis/epidemiology* ; Incidence ; Meteorological Concepts ; Particulate Matter/adverse effects* ; Environmental Exposure ; Male ; Female ; Adult ; Air Pollution ; Middle Aged

The pathogenesis of osteoarthritis (OA) is related to a variety of factors such as mechanical overload, metabolic dysfunction, aging, etc., and is a group of total joint diseases characterized by intra-articular chondrocyte apoptosis, cartilage fibrillations, synovial inflammation, and osteophyte formation. At present, the treatment methods for osteoarthritis include glucosamine, non-steroidal anti-inflammatory drugs, intra-articular injection of sodium hyaluronate, etc., which are difficult to take effect in a short period of time and require long-term treatment, so the patients struggle to adhere to doctor’s advice. Some methods can only provide temporary relief without chondrocyte protection, and some even increase the risk of cardiovascular disease and gastrointestinal disease. In the advanced stages of OA, patients often have to undergo joint replacement surgery due to pain and joint dysfunction. Mitochondrial dysfunction plays an important role in the development of OA. It is possible to improve mitochondrial biogenesis, quality control, autophagy balance, and oxidative stress levels, thereby exerting a protective effect on chondrocytes in OA. Therefore, compared to traditional treatments, improving mitochondrial function may be a potential treatment for OA. Here, we collected relevant literature on mitochondrial research in OA in recent years, summarized the potential pathogenic factors that affect the development of OA through mitochondrial pathways, and elaborated on relevant treatment methods, in order to provide new diagnostic and therapeutic ideas for the research field of osteoarthritis.

Objective To investigate the feasibility of mimics software in analyzing a new type of complex anterior cervical fixation—anterior transpedicular screw fixation+zero notch internal fixation.Methods From January 2021 to September 2022,50 normal pedestrians who underwent cervical spine CT scanning were selected for C1-C7 segment scanning,including 27 males and 23 females,aged from 25 to 65 years old with an average of(46.0±9.0)years old.The dicom format is exported and engraved into the CD,and use the mimics software to perform 3D reconstruction of each segment.A simulated screw is placed on the image according to the critical value of zero notch screw(head and tail angle 44°,internal angle 29°).The posi-tion of zero notch screw in each segment is observed to determine the feasibility of anterior transpedicular screw fixation plus zero notch internal fixation.Results For the upper zero notch screws the three-dimensional images of the cervical spine across all 50 subjects within the C3-C7 segments demonstrated safe position,wwith no instances of intersection with ATPS.For the lower zero notch screw,in C3-C4 and C4-C5,4 out of 50 subjects are in the safe position in the three-dimensional images of cervical ver-tebrae,and 46 cases could achieve secure screw placement when the maximum caudal angle is(32.3±1.9)° and(36.1±2.2)°,respectively.In C5-C6 and C6-C7 segments,no lower zero notch screws intersected with ATPS,and all screws are in safe posi-tions.Conclusion Lower cervical anterior pedicle screw fixation plus zero notch internal fixation can achieve successful nail placement through the selected entry point and position.

Endodontic diseases are a kind of chronic infectious oral disease.Common endodontic treatment concepts are based on the removal of inflamed or necrotic pulp tissue and the replacement by gutta-percha.However,it is very essential for endodontic treatment to debride the root canal system and prevent the root canal system from bacterial reinfection after root canal therapy(RCT).Recent research,encompassing bacterial etiology and advanced imaging techniques,contributes to our understanding of the root canal system's anatomy intricacies and the technique sensitivity of RCT.Success in RCT hinges on factors like patients,infection severity,root canal anatomy,and treatment techniques.Therefore,improving disease management is a key issue to combat endodontic diseases and cure periapical lesions.The clinical difficulty assessment system of RCT is established based on patient conditions,tooth conditions,root canal configuration,and root canal needing retreatment,and emphasizes pre-treatment risk assessment for optimal outcomes.The findings suggest that the presence of risk factors may correlate with the challenge of achieving the high standard required for RCT.These insights contribute not only to improve education but also aid practitioners in treatment planning and referral decision-making within the field of endodontics.

Objective To explore the predictive value of soluble fms-like tyrosine kinase-1(sFlt-1)and leukotriene B4(LTB4)in patients with intracranial aneurysms for cerebral vasospasm(CVS)after interventional embolization.Methods A total of 98 patients with intracranial aneurysms admitted to our hospital from January 2019 to September 2023 were regarded as the observation group,and were divided into the CVS group(32 cases)and the non CVS group(66 cases)according to whether CVS occurred or not within 3 to 5 days after surgery;102 healthy examinees in our hospital were selected as the control group.Enzyme-linked immunosorbent assay was used to detect serum levels of sFlt-1 and LTB4;the influencing factors for CVS after interventional embolization of intracranial aneurysms were analyzed by Logistic regression analysis;the predictive value of serum sFlt-1 and LTB4 levels for the occurrence of CVS after interventional embolization of intracranial aneurysms was analyzed by receiver operating characteristic(ROC)curve.Results The serum levels of sFlt-1 and LTB4 of patients in the observation group were obviously higher than those in the control group,and the differences were statistically significant(P<0.05).The serum levels of sFlt-1 and LTB4,and the proportions of patients with postoperative blood pressure fluctuation range≥30 mmHg and Hunt-Hess grade Ⅲ in the CVS group were obviously higher than those in the non CVS group,and the differences were statistically significant(P<0.05).SFlt-1(OR:2.985;95%CI:1.684 to 5.291)and LTB4(OR:2.868;95%CI:1.581 to 5.204)were the independent risk factors for CVS after interventional embolization of intracranial aneurysms(P<0.05).The area under the curve(AUC)of sFlt-1 and LTB4 alone and in combination for predicting the occurrence of CVS after interventional embolization of intracranial aneurysms were 0.839,0.825,and 0.915,respectively,with sensitivity of 84.44%,87.59%,and 81.36%,and specificity of 74.26%,75.87%,and 90.98%,respectively.The AUC of the combination of the two was higher than those of sFlt-1 and LTB4 alone,and the differences were statistically significant(Z=2.150,2.546,P<0.05).Conclusion The serum levels of sFlt-1 and LTB4 in patients with CVS after interventional embolization of intracranial aneurysms are increased,and the combination of the two can serve as the important indicators for predicting CVS.

OBJECTIVE: To evaluate the feasibility of S₂ alar iliac screw insertion in Chinese children using computerized three-dimension reconstruction and simulated screw placement technique, and to optimize the measurement of screw parameters. METHODS: A total of 83 pelvic CT data of children who underwent pelvic CT scan December 2018 to December 2020 were retrospectively analyzed, excluding fractures, deformities, and tumors. There were 44 boys and 39 girls, with an average age of (10.66±3.52) years, and were divided into 4 groups based on age (group A:5 to 7 years old;group B:8 to 10 years old;group C:11-13 years old;group D:14 to 16 years old). The original CT data obtained were imported into Mimics software, and the bony structure of the pelvis was reconstructed, and the maximum and minimum cranial angles of the screws were simulated in the three-dimensional view with the placement of 6.5 mm diameter S2 alar iliac screws. Subsequently, the coronal angle, sagittal angle, transverse angle, total length of the screw, length of the screw in the sacrum, width of the iliac, and distance of the entry point from the skin were measured in 3-Matic software at the maximum and minimum head tilt angles, respectively. The differences among the screw parameters of S₂ alar iliac screws in children of different ages and the differences between gender and side were compared and analyzed. RESULTS: In all 83 children, 6.5 mm diameter S₂ iliac screws could be placed. There was no significant difference between the side of each screw placement parameter. The 5 to 7 years old children had a significantly smaller screw coronal angle than other age groups, but in the screw sagittal angle, the difference was more mixed. The 5 to 7 years old children could obtain a larger angle at the maximum head tilt angle of the screw, but at the minimum cranial angle, the larger angle was obtained in the age group of 11 to 13 years old. There were no significant differences among the age groups. The coronal angle and sagittal angle under maximum cephalic angle and minimum cranial angle of 5 to 7 years old male were (40.91±2.91)° and (51.85±3.75)° respectively, which were significantly greater than in female. The coronal angle under minimum cranial angle was significantly greater in girls aged 8-10 years old than in boys. For the remaining screw placement angle parameters, there were no significant differences between gender. The differences in the minimum iliac width, the screw length, and the length of the sacral screws showed an increasing trend with age in all age groups. The distance from the screw entry point to the skin in boys were significantly smaller than that of girls. The minimum width of the iliac in boys at 14 to 16 years of age were significantly wider than that in girls at the same stage. In contrast, in girls aged 5 to 7 years and 11 to 13 years, the screw length was significantly longer than that of boys at the same stage. CONCLUSION The pelvis of children aged 5 to 16 years can safely accommodate the placement of 6.5 mm diameter S₂ alar iliac screws, but the bony structures of the pelvis are developing and growing in children, precise assessment is needed to plan a reasonable screw trajectory and select the appropriate screw length.
Humans ; Male ; Female ; Child ; Adolescent ; Child, Preschool ; Ilium/surgery* ; Retrospective Studies ; Feasibility Studies ; Bone Screws ; Pelvis ; Sacrum/surgery* ; Spinal Fusion/methods*