1.Mosquito monitoring and influence of meteorological factors on mosquito density around Beijing Capital International Airport, 2016-2022
Ran FENG ; Tie-zheng MA ; Si-jie ZHU ; Bo TIAN ; Fei QUAN ; Zhi-lin WU ; Xiao-tao LIU ; Fu-yuan ZHANG ; Song-jian ZHANG
Acta Parasitologica et Medica Entomologica Sinica 2026;33(1):40-48
Objective To understand mosquito density, species composition, and seasonal variations around the Beijing Capital International Airport(BCIA)and provide scientific evidence for mosquito-borne disease prevention and control. Methods Meteorological data were collected from 2016 to 2022, and mosquito density was monitored at seven surveillance sites around the BCIA from May to October each year using CO2-baited mosquito traps to analyze the relationship between mosquito density and meteorological factors. Results In total,68 518 female mosquitoes were captured, with a mosquito density of 10.20 per light · hour. The dominant species was Culex pipiens pallens(73.90%), followed by Aedes albopictus(9.71%)and Ae. vexans(9.29%);the mosquito density was highest in 2016(14.8 per light·hour)and lowest in 2022(4.46 per light·hour). Significant statistical differences were observed in mosquito density among different species(F=18.118, P<0.05). The density of Cx. pipiens pallens and other mosquito species showed a mutually exclusive trend; the peak of mosquito density varied based on years and habitats, with significant statistical differences in mosquito density among different habitats(F=8.504, P<0.05). The highest mosquito density was observed near the Wenyu River(21.50 per light·hour), whereas the lowest was recorded at the BCIA construction site(2.44 per light· hour). The monthly average temperature(r=0.595), monthly average highest temperature(r=0.575), and monthly average lowest temperature(r=0.624)showed moderate positive correlations, whereas the monthly average air pressure(r=-0.484)showed a moderate negative correlation. The monthly average minimum temperature was included in the regression model(F=25.575, P<0.000), and the equation Y=1.029X4-8.181 was used. The monthly average air pressure 2 months prior(b=-2.418, β=-1.619, P<0.05)and the monthly average relative humidity(b=-0.739, β=-1.201, P<0.05)significantly negatively predicted the mosquito density. Notably, the regression equation used was y=2526.170+(-2.418)X9+(-0.739)X13. The exposure-response analysis revealed that the density of mosquitoes was not linearly related to the average monthly air pressure, rainfall, and duration of sunshine. Conclusions The dominant mosquito species around the BCIA was Cx. pipiens pallens, Ae. albopictus, and Ae. vexans. During the control of Cx. pipiens pallens, the impact on other mosquito species must also be considered. Environmental management, breeding sites, and scientific use of pesticides should be prioritized based on the activity periods of mosquitoes. Further studies on mosquitoes and meteorological factors should be conducted to provide references and novel avenues for mosquito control.
2.Clinical Efficacy and Mechanism of Anmei Dan in Treating Insomnia with Amnesia Based on Principle of Treating Different Diseases with Same Method: A Review
Qiqi FENG ; Bo XU ; Kang SUN ; Miao ZHU ; Zhi ZHANG ; Jing XIA ; Guangjing XIE ; Yuan LIU
Chinese Journal of Experimental Traditional Medical Formulae 2026;32(17):107-116
In modern society, the comorbidity of insomnia with amnesia has shown a significantly increasing incidence and become increasingly severe, emerging as a public health issue that endangers people's physical and mental health and quality of life. Anmei Dan (AMD), originally recorded in the Shishi Milu by CHEN Shiduo in the Qing Dynasty, possesses profound theoretical foundations and distinct clinical advantages in ameliorating insomnia with amnesia. Basic research has unequivocally confirmed its definite therapeutic effects on insomnia with amnesia and revealed partial mechanisms. AMD is therefore a veritable classic prescription embodying the principle of treating different diseases with the same method for insomnia and amnesia. However, few researchers have reviewed the related research progress. This article systematically summarized the theoretical connotations of traditional Chinese medicine in treating insomnia with amnesia, delineated the multi-component material basis of AMD in ameliorating insomnia with amnesia (including various chemical components such as ginsenosides, jujubosides, and salvianolic acids), and evaluate its multi-dimensional clinical efficacy (e.g., prolonging total sleep time, improving sleep efficiency, and enhancing memory). Moreover, it systematically summarizes the multi-pathway mechanisms of action. The results indicate that AMD has a clear material basis, definite clinical efficacy, and a favorable safety profile in ameliorating insomnia and amnesia. AMD may exert the therapeutic effect by regulating sleep-wake rhythms, enhancing synaptic plasticity, inhibiting neuroimmune inflammation, and modulating autophagy, oxidative stress, and energy metabolism. In conclusion, AMD exerts synergistic effects through multi-component, multi-dimensional, and multi-pathway approaches, serving as an important prescription for enriching and developing the theory of treating different diseases with the same method for insomnia with amnesia.
3.3D C-arm Combined With Orthopedic Robot-assisted Iliosacral Screw Fixation Through S3 Vertebra for Pelvic Fracture:Report of 4 Cases
Zongdong ZHU ; Bo TAN ; Zhi TANG ; Jiang HU ; Dan WEI ; Feng LIAO
Chinese Journal of Minimally Invasive Surgery 2025;25(10):636-640
Objective To verify the feasibility and safety of three-dimensional(3D)image acquisition by C-arm combined with orthopedic robot-assisted iliosacral screw fixation through S3 vertebra.Methods From July 2023 to June 2024,a total of 4 patients with closed pelvic fracture were surgically treated.Preoperative pelvic CT 3D reconstruction showed the presence of an ideal iliosacral screw bone channel through S3 vertebra which required screw fixation.There was no such channel through the S1 vertebra,or the stability of fixation through the S3 channel was better than that through the S1 channel.The 3D image acquisition by C-arm combined with orthopedic surgical robot was used to insert screws.Follow-ups were conducted for at least 6 months after surgery to assess fracture healing and limb function.Results All the 4 patients were successfully implanted with a S2 and a S3 iliosacral screw,and all the 8 screws did not penetrate the cortical bone.Three cases had excellent Majeed scores and 1 case had good scores at 3 months after surgery.Follow-ups were conducted for 18,12,7,and 6 months after surgery,respectively,and all fractures healed smoothly without any loosening or breakage of screws.Conclusion 3D image acquisition by C-arm combined with orthopedic robot-assisted iliosacral screw fixation through S3 vertebra is feasible,safe and effective.
4.Assay for detection of toxigenic Clostridioides difficile with combined microfluidic chip and immunochromatography technology
Hong-rui CHENG ; Xiao-jun SONG ; Yu CHEN ; Meng ZHANG ; Meng-ting CAI ; Kun ZHU ; Yu-lei TAI ; Shi-bo YING ; Da-zhi JIN
Chinese Journal of Zoonoses 2025;41(2):142-149
An assay was established for detection of toxigenic Clostridioides difficile by combining microfluidic chip analysis with immunochromatography,and its performance was evaluated and compared with those of the Xpert C.difficile/Epi and VIDAS CD AB tests.Primer pairs were designed according to the tcdB and tpi genes in C.difficile.The specificity,limit of detection,reproducibility,and stability were evaluated.A total of 215 stool samples from patients with diarrhea were collected and tested in parallel with the Xpert C.difficile/Epi,VIDAS CDAB,and our assay.C.difficile was isolated from samples,and the tcdB gene was identified when discrepant results were obtained from the three above assays.Our assay showed no cross-reaction with other diarrhea-associated pathogens.Its reproducibility was 100%in testing of two standard plasmids containing tcdB and tpi genes at two concentrations(105 and 102 copies/μL).Two standard plasmids were detected after the PCR and immunochromatography reagents had been stored for 3,6,9,and 12 months,and all the results were posi-tive.The limit of detection was 10 copies/μL for toxigenic C.difficile.Testing of 33 samples positive for C.difficile with our assay(33/215,15.3%)yielded findings statistically coherent with those of the Xpert C.difficile/Epi test(kappa value=0.965).The sensitivity,specificity,positive predictive value,and negative predictive value of our assay,with respect to Xpert C.difficile/Epi as the standard,were 94.3%,100.0%,100.0%,and 98.9%;these values were significantly higher than those of VIDAS CDAB(60.0%,98.9%,91.3%,and 92.7%)(Kappa=0.714,OR=157.50,95%CI:62.03-847.28,P=0.013).In conclusion,our newly developed assay is specific,stable,and reproducible,and may be used for rapid and accu-rate detection of toxigenic C.difficile.The assay could be used for C.difficile infection screening in outpatient and emergen-cy,community medical service center,and epidemiological settings.
5.Quantitative analysis of motion of cardiac substructures in deep inspiratory breath holding radiotherapy for left breast cancer
Zhao-hui TANG ; Zhe ZHANG ; Wei-bin MAO ; Bo HUANG ; Jun-feng AI ; Chao-fan ZHU ; Zhi-chao XIE ; Ya-jie LIU
Chinese Medical Equipment Journal 2025;46(3):54-58
Objective To quantify the volume and movement of cardiac substructures by using coronary computed tomography angiography(CCTA)to provide guidance for the design of deep inspiratory breath-holding radiation therapy for left breast cancer and the protection of organs at risk.Methods Totally 18 female patients who received conventional chest plain scan and CCTA were selected to simulate the design process of radiotherapy plan for left breast cancer patients with internal mammary lymph nodes.Retrospective reconstruction of CCTA data was performed for each patient,with 10 phase images(with an interval of 10%)within a R-R cardiac cycle(10%-100%)to simulate the true range of motion of the heart.The heart,left atrium(LA),left ventricle(LV),right atrium(RA),right ventricle(RV),left anterior descending artery(LAD),left circumflex coronary artery(LCX)and right coronary artery(RCA)were contoured at each phase.The distances from the centroid position to the average position of LAD,LCX and RCA were measured at each phase in the superior-inferior(SI),anterior-posterior(AP)and left-right(LR).The average volume and range of volume changes of LA,LV,RA,RV and heart were analyzed within a cardiac cycle.The expansion margins of planning organs at risk volume(PRV)were calculated.SPSS 19.0 software was used for statistical analysis.Results The following average absolute displacements were found in SI,AP and LR coordinates:(1.8±0.7)mm,(1.2±0.5)mm and(1.5±0.5)mm for LAD,respectively;(2.1±0.7)mm,(1.5±0.6)mm and(1.9±0.7)mm for LCX,respectively;(1.6±0.5)mm,(2.2±0.9)mm and(2.2±0.8)mm for RCA,respectively.The volume changes of LA,LV,RA,RV and heart within a cardiac cycle ranged from 34.3 to 63.9 cm3,122.1 to 154.3 cm3,29.3 to 53.6 cm3,57.2 to 94.3 cm3 and 480.1 to 515.4 cm3,respectively.The theoretical expansion margins of LAD,LCX and RCA in all the three directions were within 2 mm.Conclusion The ranges of movement and volume changes of cardiac substructure are quantitati-vely displayed,and references are provided for the planning of deep inspiratory breath-holding radiation therapy for left breast cancer and the protection of organs at risk.[Chinese Medical Equipment Journal,2025,46(3):54-58]
6.Efficacy and safety of a facilitated percutaneous coronary intervention with half-dose recombinant staphylokinase in ST-segment elevation myocardial infarction
Tian-yu WU ; Wen-hao ZHANG ; Peng-sheng CHEN ; Chen LI ; Tian WU ; Zhan LÜ ; Tong WANG ; Kun LIU ; Zhi-wen TAO ; Xiao-xuan GONG ; Liang YUAN ; Yong LI ; Bo CHEN ; Xin CHEN ; Zeng-guang CHEN ; Nai-quan YANG ; Yuan-yuan SANG ; Xiao-yan WANG ; Bai-hong LI ; Li ZHU ; Guo-yu WANG ; Xin ZHAO ; Chuan LU ; Jun JIANG ; Rui-na HAO ; Chun-jian LI
Chinese Journal of Interventional Cardiology 2025;33(8):431-438
Objective To investigate the clinical efficacy and safety of facilitated percutaneous coronary intervention(PCI)with half-dose recombinant staphylokinase(r-SAK)in patients with ST-segment elevation myocardial infarction(STEMI)who are expected to undergo PCI within 120 minutes.Methods From October 2021 to August 2022,a total of 200 STEMI patients in eight centers were included and randomly assigned in a 1﹕1 ratio to either r-SAK group or control group.Patients received loading doses of aspirin and ticagrelor and intravenous heparin and were randomized to receive an intravenous bolus of either 5 mg r-SAK or normal saline prior to PCI.The outcomes were set as ST-segment resolution(STR)at 60-90 minutes after PCI,the proportion and transition of pathological Q waves on the 5th day after PCI,and the proportion of high-sensitivity cardiac troponin T(hs-cTnT)peaking within 12 hours of onset.The safety outcome was major bleeding events defined as Bleeding Academic Research Consortium(BARC)≥type 3 bleeding during hospitalization.Results Compared with the control group,the r-SAK group had a higher proportion of STR≥70%within 60-90 minutes after PCI(58.3%vs.40.3%,P=0.009);a lower proportion of pathological Q waves(59.1%vs.74.1%,P=0.040);a lower rate of Q wave progression(14.8%vs.43.2%,P<0.001);a higher rate of Q wave disappearance(12.5%vs.3.7%,P=0.027);and a higher proportion of hs-cTnT peaking within 12 hours of symptom onset[31/40(77.5%)vs.17/33(51.5%),P=0.027].Regarding the safety outcome,no significant difference in BARC≥type 3 bleeding was found between the two groups during hospitalization(P>0.05).Conclusions For STEMI patients who were expected to undergo primary PCI within 120 minutes of symptom onset,the facilitated PCI with half-dose r-SAK significantly increased the proportion of STR≥70%at 60-90 minutes after PCI,reduced the formation of pathological Q waves,and shortened the time to peak hs-cTnT,without increasing the risk of bleeding,which should be an alternative reperfusion strategy worthy of further study.
7.A Pneumatic Micro-valve with Sandwich Structure Based on Micro-electro-mechanical System
Shao-Jie MA ; Wen-Bo LI ; Yu-Chen ZHU ; Zhi-Rui LI ; Bin ZHAO ; Fei FENG
Chinese Journal of Analytical Chemistry 2025;53(5):758-764
In this study,an ON/OFF type micro-valve with a sandwich(glass-silicon-glass)structure was designed and fabricated based on the micro-electro-mechanical system(MEMS)technique.The deformable membrane of this micro-valve was prepared on the silicon on insulator(SOI)substrate and sealed using Si-Si bonding and anodic bonding methods.The micro-valve had high-temperature stability and was suitable for integration with other gas chromatography components.The deformable membrane with a thickness of 10 μm was processed on the top silicon of the SOI substrate.The flow control of the micro-valve could be achieved by changing the driving pressure applied to the deformable membrane to deform it.Compared with polymer membranes,the deformable membrane prepared on the top layer silicon of SOI had better temperature stability and could be released using the deep reactive ion etching technique after silicon-silicon bonding,avoiding deformation during the preparation process.In addition,due to the small gap between the membrane and the inlet/outlet holes,the dead volume of the microvalve was very small.The test results indicated that the micro-valve achieved flow control and ON/OFF functions with good repeatability.
8.A Monolithic Integrated Gas Chromatography Chip with Gas Chromatographic Column and Helium Discharge Ionization Detector
Yu-Chen ZHU ; Shao-Jie MA ; Wen-Bo LI ; Zhi-Rui LI ; Bin ZHAO ; Fei FENG
Chinese Journal of Analytical Chemistry 2025;53(7):1064-1071
A monolithic integrated gas chromatography chip,consisting of a micro gas chromatography column(μGCC)and a micro helium discharge ionization detector(μHDID)was proposed.The chip was fabricated using micro electromechanical system(MEMS)technique,and its sensitivity was improved from two aspects.On one hand,open tubular column was selected as the separation device,and the auxiliary helium channel width of μHDID was modulated based on the microchannel width of the μGCC to match the flow rates of μHDID and μGCC.On the other hand,the electrode structure inside the μHDID collection zone was optimized,a bias electrode group around the collection electrode was constructed,and the ion collection efficiency was improved.After coating HKUST-1 as the stationary phase,the monolithic integrated gas chromatography chip could achieve baseline separation and detection of light hydrocarbon gas mixture(methane,ethane,propane,andn-butane),with a detection limit for propane as low as 25 pg.The chip could carried out test under temperature-programmed conditions,with a resolution of 9.24 for ethane and propane.
9.A Micro Gas Chromatographic Column with Large Surface Area Based on Anodization
Shao-Jie MA ; Wen-Bo LI ; Yu-Chen ZHU ; Bo-Xin CHEN ; Zhi-Rui LI ; Bin ZHAO ; Fei FENG
Chinese Journal of Analytical Chemistry 2025;53(10):1607-1614
A micro gas chromatographic column with mesoporous surface micro column array prepared by anodization method was proposed.A porous support layer with a characteristic pore size of about 30 nm inside the chromatographic column was prepared in situ using anodization method,and a uniform alumina stationary phase was deposited on the mesoporous support layer using atom layer deposition(ALD)technique.The existence of a mesoporous support layer increased surface area of the chromatographic column,thereby increasing the total amount of stationary phase loading and enhancing column capacity,which facilitated chromatographic separation.The test results showed that the porous support layer significantly reduced the longitudinal molecular diffusion and mass transfer resistance of the micro gas chromatographic column,and significantly increased the number of theoretical plates(n-nonane increased by 290.2%).Furthermore,column efficiency of the chromatographic column was less affected by flow rate,which was conducive to rapid separation of heavy hydrocarbon mixtures.
10.Guided by National Strategic Needs,Striving to Build a First-Class Forensic Medicine Discipline—The Construction Plan for Forensic Medicine at Southern Medical University
Dong-Fang QIAO ; Ping-Ming QIU ; Qi WANG ; Yun-Chun TAI ; Dong-Ri LI ; Jing-Tao XU ; Qi-Zhi LUO ; En-Ping HUANG ; Bo-Feng ZHU
Journal of Forensic Medicine 2025;41(1):15-19
The 2024 National Education Work Conference pointed out that at the current juncture of the critical period for achieving the goals and tasks of the 14th Five-Year Plan,the implementation of the Education Powerhouse Construction Plan Outline should be taken as the main line of work,and building first-class disciplines is an crucial task for a higher education powerhouse.In 2022,forensic medicine was officially listed as a first-level discipline under the medical category,presenting an un-precedented historical opportunity for the development of forensic medicine.The forensic medicine dis-cipline of Southern Medical University comprehensively improves the quality of talent cultivation and facilitates the construction of first-class disciplines as its main direction.It aims to initiate and imple-ment a high-level faculty team building plan featuring"combining recruitment and cultivation,inter-disciplinary integration";make vigorous efforts to establish a first-level doctoral program,refine advan-tageous second-level disciplines and research directions;and establish an innovative research platform from a high starting point with deep integration.The discipline adheres to moral cultivation and the Five Domains of Education simultaneous development,to build a high-quality talent joint training model.Guided by the construction of the national legal system and industry needs,the discipline will enhance social service capabilities.The forensic medicine construction in our university will continue to contribute to the rule of law in China and educational power.


Result Analysis
Print
Save
E-mail