OBJECTIVE: To explore clinical effect of autologous osteochondral transplantation (AOT) in the treatment of recurrent anterior dislocation of the shoulder joint with glenoid cartilage defect in rabbits by establishing a model of recurrent anterior dislocation of the shoulder joint with < 20% glenoid cartilage defect in rabbits. METHODS: Twenty-four male New Zealand white rabbits, aged 6-month-old, weighed (2.69±0.17) kg were selected. The labrum of shoulder joint of rabbits was artificially destroyed to establish a model of recurrent anterior dislocation of shoulder joint with cartilage defect. They were divided into AOT surgery group and simple suture group, with 12 rabbits in each group. AOT group were underwent AOT surgery, while simple suture group was treated with simple Bankart suture for recurrent shoulder joint dislocation. At 6 and 12 weeks after operation, 6 rabbits between two groups were sacrificed for sampling. The dietary conditions, activity conditions, mental states of rabbits and healing conditions of grafts in the specimens were observed and compared between two groups. HE staining was used to observe cell creep, cell morphology, inflammatory cell infiltration, fibrochondrocytes and their arrangement. Masson staining was used to observe the formation and arrangement of collagen fibers; Safrane-green staining was used to observe the regeneration of articular cartilage, subchondral bone and bone tissue. Bone mineral density (BMD), bone volume (BV) and trabecular thickness (Tb.Th) between two groups were measured by Micro-CT to evaluate the remodeling of shoulder glenoid bone defects by autologous osteochondral cartilage. RESULTS: After different surgical interventions were carried out in both groups of rabbits, at 6 weeks after the operation, the abduction, extension, internal rotation and external rotation of the shoulder joint on the operated side showed limited range of motion compared with the contralateral side, while adduction and forward flexion showed no obvious abnormalities compared with the contralateral side. At 12 weeks after operation, the range motion of tshoulder joints in both groups of rabbits had returned to the state before modeling. The effects of HE staining, Masson staining and safrane-green staining at 12 weeks after operation in both groups were stronger than the staining results at 6 weeks after operation. Moreover, the results of HE staining, Masson staining and safranin fixation green staining in AOT group at 6 and 12 weeks after operation were all higher than those in simple suture group. Micro-CT scan results at 6 and 12 weeks after operation showed that BMD (0.427±0.014), (0.466±0.032) g·cm-3, BV(116.171±3.527), (159.327±3.500) mm3, and Tb.Th (0.230±0.006), (0.285±0.009) mm in AOT group, which were higher than those of simple suture group in BMD(0.358±0.011), (0.384±0.096) g·cm-3, BV(72.657±3.903), (118.713±3.860) mm3, and Tb.Th(0.204±0.009), (0.243±0.007) mm;and the differences were statistically significant (P<0.05). CONCLUSION AOT procedure could effectively promote osteogenesis and fibrocartilage regeneration in the cartilage defect area of the shoulder glenoid <20%, which is conducive to reshaping the structure of the shoulder glenoid.
Animals ; Rabbits ; Male ; Transplantation, Autologous ; Cartilage, Articular/injuries* ; Shoulder Dislocation/physiopathology* ; Bone Transplantation ; Shoulder Joint/surgery*

OBJECTIVE: To compare the biomechanical properties of four internal fixation methods in a lower cervical spine injury model using the finite element method. METHODS: Cervical CT data of a 28-year-old healthy adult male were utilized to establish a finite element model of the normal cervical spine and a lower cervical spine three-column injury model. Four internal fixation methods were then applied to the three-column injury model, resulting in four groups:Group A, anterior cervical locked-plate(ACLP) fixation system model(anterior approach);Group B, posterior cervical pedicle screw fixation model (posterior approach);Group C, combined anterior and posterior cervical pedicle screw fixation model; Group D, Novel composite anterior cervical internal fixation model. A 75 N axial compressive load and a 1.0 N·m pure moment were applied to the upper surface of the cervical spine model to simulate flexion, extension, rotation, and lateral bending movements. The intervertebral range of motion(ROM) and stress distribution of the internal fixators under different motion conditions were compared across all models. RESULTS: Compared with the normal model, the reductions in overall intervertebral ROM for each group under flexion, extension, rotation, and lateral bending were as follows:Group A, 24.04°, 23.12°, 6.24°, and 9.06°;Group B, 24.42°, 24.34°, 6.48°, and 9.20°;Group C, 25.43°, 25.29°, 7.17°, and 9.57°;Group D, 24.75°, 25.5°, 6.71°, and 9.12°. The peak stress values of the internal fixators in each group were:Group A, 53.9 MPa, 79.9 MPa, 61.4 MPa, and 80.3 MPa;Group B, 218.3 MPa, 105.4 MPa, 206.6 MPa, and 186.8 MPa;Group C, 40.8 MPa, 97.2 MPa, 47.1 MPa, and 39.4 MPa;Group D, 93.0 MPa, 144.0 MPa, 64.8 MPa, and 106.3 MPa. CONCLUSION The biomechanical properties of the novel composite anterior cervical internal fixation method are similar to those of the combined anterior-posterior fixation method, and superior to both the anterior cervical ACLP plate-screw fixation and posterior cervical pedicle screw fixation methods.
Humans ; Finite Element Analysis ; Cervical Vertebrae/physiopathology* ; Male ; Biomechanical Phenomena ; Adult ; Fracture Fixation, Internal/methods* ; Range of Motion, Articular

Apical microsurgery is accurate and minimally invasive, produces few complications, and has a success rate of more than 90%. However, due to the lack of awareness and understanding of apical microsurgery by dental general practitioners and even endodontists, many clinical problems remain to be overcome. The consensus has gathered well-known domestic experts to hold a series of special discussions and reached the consensus. This document specifies the indications, contraindications, preoperative preparations, operational procedures, complication prevention measures, and efficacy evaluation of apical microsurgery and is applicable to dentists who perform apical microsurgery after systematic training.
Microsurgery/standards* ; Humans ; Apicoectomy ; Contraindications, Procedure ; Tooth Apex/diagnostic imaging* ; Postoperative Complications/prevention & control* ; Consensus ; Treatment Outcome

Pulpotomy, which belongs to vital pulp therapy, has become a strategy for managing pulpitis in recent decades. This minimally invasive treatment reflects the recognition of preserving healthy dental pulp and optimizing long-term patient-centered outcomes. Pulpotomy is categorized into partial pulpotomy (PP), the removal of a partial segment of the coronal pulp tissue, and full pulpotomy (FP), the removal of whole coronal pulp, which is followed by applying the biomaterials onto the remaining pulp tissue and ultimately restoring the tooth. Procedural decisions for the amount of pulp tissue removal or retention depend on the diagnostic of pulp vitality, the overall treatment plan, the patient's general health status, and pulp inflammation reassessment during operation. This statement represents the consensus of an expert committee convened by the Society of Cariology and Endodontics, Chinese Stomatological Association. It addresses the current evidence to support the application of pulpotomy as a potential alternative to root canal treatment (RCT) on mature permanent teeth with pulpitis from a biological basis, the development of capping biomaterial, and the diagnostic considerations to evidence-based medicine. This expert statement intends to provide a clinical protocol of pulpotomy, which facilitates practitioners in choosing the optimal procedure and increasing their confidence in this rapidly evolving field.
Humans ; Calcium Compounds/therapeutic use* ; Consensus ; Dental Pulp ; Dentition, Permanent ; Oxides/therapeutic use* ; Pulpitis/therapy* ; Pulpotomy/standards*

OBJECTIVE: This study aimed to explore the association between body mass index (BMI) and mortality based on the 10-year population-based multicenter prospective study. METHODS: A general population-based multicenter prospective study was conducted at four sites in rural China between 2013 and 2023. Multivariate Cox proportional hazards models and restricted cubic spline analyses were used to assess the association between BMI and mortality. Stratified analyses were performed based on the individual characteristics of the participants. RESULTS: Overall, 19,107 participants with a sum of 163,095 person-years were included and 1,910 participants died. The underweight (< 18.5 kg/m ²) presented an increase in all-cause mortality (adjusted hazards ratio [ aHR] = 2.00, 95% confidence interval [ CI]: 1.66-2.41), while overweight (≥ 24.0 to < 28.0 kg/m ²) and obesity (≥ 28.0 kg/m ²) presented a decrease with an aHR of 0.61 (95% CI: 0.52-0.73) and 0.51 (95% CI: 0.37-0.70), respectively. Overweight ( aHR = 0.76, 95% CI: 0.67-0.86) and mild obesity ( aHR = 0.72, 95% CI: 0.59-0.87) had a positive impact on mortality in people older than 60 years. All-cause mortality decreased rapidly until reaching a BMI of 25.7 kg/m ² ( aHR = 0.95, 95% CI: 0.92-0.98) and increased slightly above that value, indicating a U-shaped association. The beneficial impact of being overweight on mortality was robust in most subgroups and sensitivity analyses. CONCLUSION This study provides additional evidence that overweight and mild obesity may be inversely related to the risk of death in individuals older than 60 years. Therefore, it is essential to consider age differences when formulating health and weight management strategies.
Humans ; Body Mass Index ; China/epidemiology* ; Male ; Female ; Middle Aged ; Prospective Studies ; Rural Population/statistics & numerical data* ; Aged ; Follow-Up Studies ; Adult ; Mortality ; Cause of Death ; Obesity/mortality* ; Overweight/mortality*

A method for determination and targeted screening of diflorasone components in health products using ultra performance liquid chromatography-quadrupole time of flight mass spectrometry(UPLC-Q-TOF/MS)was established.Four representative diflorasone and esters(diflorasone,diflorasone diacetate,diflorasone-17-propionate,and diflorasone-21-propionate)were selected to optimize the pretreatment conditions,and 10 mL of extraction solvent dosage,15 min of extraction time and 5 g of salting-out agent as the optimal conditions were selected by response surface methodology.The results showed that the four analytes exhibited good linearity within the concentration range of 2.0?100 μg/L with the chromatographic peak area,and the correlation coefficients(R2)were all greater than 0.9990,while the results of recovery and relative standard deviation could satisfy the requirements of determination.The common characteristic ions of diflorasone and esters werem/z121 andm/z335,and their specific structures were obtained by analyzing the cleavage pathway based on the optimized determination conditions.A targeted screening method for other esters of diflorasone based on characteristic ions guidance strategy was established.This method had many advantages such as high efficiency,high sensitivity and good reproducibility,and could be used for targeted screening of diflorasone and esters in health products.The developed characteristic ion guided strategy could be employed to construct mass spectral databases for various glucocorticoids,enabling comprehensive targeted screening across a broad range of compounds.

Objective To evaluate the clinical value of 18F-fibroblast-activation protein inhibitor(18F-FAPI)PET/CT in malignant tumors exhibiting low uptake of 18F-fluorodeoxyglucose(18F-FDG).Methods We prospectively analyzed 62 patients with malignant tumors and low 18F-FDG uptake who underwent 18F-FAPI PET/CT in the Affiliated Cancer Hospital and Institute of Guangzhou Medical University from January 2021 to November 2022.Patient demographics information,clinical and radiological data were collected.Tumor lesions were categorized based on 18F-FAPI and 18F-FDG uptake relative to surrounding tissues into low-,moderate-,and high-uptake,with high uptake indicating positivity.The number and tracer uptake levels of primary tumors and metastatic lesions visualized by both 18F-FDG and 18F-FAPI were recorded and compared.Results Of the 62 primary tumors,18(29.0%)showed low-uptake and 44(71.0%)moderate-uptake on 18F-FDG PET,while 1(1.6%),6(9.7%),and 55(88.7%)showed low,moderate,and high uptake on 18F-FAPI,respectively.The maximum standardized uptake value(SUVmax)for primary tumors was significantly higher with 18F-FAPI than with 18F-FDG(7.5±5.6 vs.3.9±2.1,P<0.01).The number of positive lymph node foci revealed by 18F-FAPI was noticeably higher than that by 18F-FDG(77 vs.38,P<0.01).A total of 16 distant organ metastases were identified,with 11(68.8%)detected by 18F-FDG and 15(93.8%)by 18F-FAPI,showing no significant difference in detection rates(P>0.05).Conclusions 18F-FAPI PET/CT effectively visualizes primary and metastatic lesions in malignant tumors with low 18F-FDG uptake,suggesting its potential as a promising radiotracer for such malignancies.

Objective To investigate the feasibility of mimics software in analyzing a new type of complex anterior cervical fixation—anterior transpedicular screw fixation+zero notch internal fixation.Methods From January 2021 to September 2022,50 normal pedestrians who underwent cervical spine CT scanning were selected for C1-C7 segment scanning,including 27 males and 23 females,aged from 25 to 65 years old with an average of(46.0±9.0)years old.The dicom format is exported and engraved into the CD,and use the mimics software to perform 3D reconstruction of each segment.A simulated screw is placed on the image according to the critical value of zero notch screw(head and tail angle 44°,internal angle 29°).The posi-tion of zero notch screw in each segment is observed to determine the feasibility of anterior transpedicular screw fixation plus zero notch internal fixation.Results For the upper zero notch screws the three-dimensional images of the cervical spine across all 50 subjects within the C3-C7 segments demonstrated safe position,wwith no instances of intersection with ATPS.For the lower zero notch screw,in C3-C4 and C4-C5,4 out of 50 subjects are in the safe position in the three-dimensional images of cervical ver-tebrae,and 46 cases could achieve secure screw placement when the maximum caudal angle is(32.3±1.9)° and(36.1±2.2)°,respectively.In C5-C6 and C6-C7 segments,no lower zero notch screws intersected with ATPS,and all screws are in safe posi-tions.Conclusion Lower cervical anterior pedicle screw fixation plus zero notch internal fixation can achieve successful nail placement through the selected entry point and position.

OBJECTIVE: To systematically evaluate obesity on the outcome of rotator cuff repair. METHODS: Literatures on the relationship between obesity and outcomes after rotator cuff repair were searched from PubMed, Embase, Cochrane Library, Web of Science, China biology medicine(CBM), CNKI, Wanfang and VIP databases from building database to August 1, 2022, and were screened independently by two authors according to inclusion and exclusion criteria. Endnote X9 and Excel 2019 were used for literature extraction, management and data entry, and Newcastle-Ottawa Scale (NOS) was used to evaluate quality of the included literatures. STATA 16.0 and RevMan 5.4 softwares were used to evaluate postoperative retear rate, reoperation rate, complication rate, American Shoulder and Elbow Surgeons (ASES) score, visual analogue scale (VAS), operative time and external rotation angle of shoulder joint pain were analyzed. RESULTS: Totally 13 literatures were included, including 6 retrospective studies, 5 case-control studies, 1 prospective cohort study, and 1 abstract of a study for which the full text was not available, with 85 503 patients (31 973 in obese group and 53 530 in non-obese group). Meta-analysis showed there were statistical differences between two groups in retear rate [OR=2.58, 95%CI(1.23, 5.41), P=0.01], reoperation rate[OR=1.31, 95%CI(1.21, 1.42), P<0.00], complication rate [OR=1.57, 95%CI(1.31, 1.87), P=0.00], ASES score[MD=-3.59, 95%CI(-5.45, -1.74), P=0.00], and VAS[MD=0.24, 95%CI(0.00, 0.49), P=0.05]. While there were no differences between two groups in operative time[MD=6.03, 95%CI(-7.63, 19.69), P=0.39], external rotation angle of shoulder joint[MD=-1.79, 95%CI(-5.30, 1.71), P=0.32]. CONCLUSION Obesity is associated with higher rates of retear, resurgery, complications, poorer shoulder function and pain after rotator cuff repair.
Humans ; Rotator Cuff/surgery* ; Rotator Cuff Injuries/complications* ; Retrospective Studies ; Prospective Studies ; Treatment Outcome ; Shoulder Pain ; Obesity/surgery* ; Arthroscopy