This paper aims to contribute to guaranteeing the stable development and enhancing the understanding of ecological agriculture of Chinese materia medica so that the national strategy and industrial demand can be better served. It first introduces current traditional Chinese medicine(TCM)policy and industrial development status from five aspects, including policy guarantee, theoretical support, technological innovation, standardization system, and brand influence. Then, the paper analyzes the development dilemma of TCM agriculture in production and quality increase and ecological environment protection. It also proposes the development goals of ecological agriculture of Chinese materia medica that meet the current industrial development demand, which are reducing chemical fertilizers, pesticides, and carbon emissions, improving quality, increasing efficiency, and protecting ecological environment. In addition, the new development goals are interpreted through case studies. Finally, this paper proposes four development strategies for ecological agriculture of Chinese materia medica: conducting research on the pattern and spatial and temporal variations of nationwide TCM production areas; studying the internal and external ecological memories of medicinal plant growth from the perspectives of genetic variations and environmental adaptation variations and elucidating their contributions to the formation of quality; carrying out selection and breeding of stress-resistant varieties for ecological agriculture of Chinese materia medica, the optimization of key technologies for soil improvement and restoration and green prevention and control against diseases and pests, and the improvement of quality; carrying out research on the quality assurance and value realization of ecological products made from TCM. This research can provide guidance for policy formulation, theoretical development of the discipline, and the enhancement of industrial technology for ecological agriculture of Chinese materia medica.
Agriculture/methods* ; China ; Drugs, Chinese Herbal ; Plants, Medicinal/chemistry* ; Ecosystem ; Materia Medica ; Medicine, Chinese Traditional

To clarify the species, pathogenicity, and distribution of the pathogens causing the root rot of Atractylodes lancea in Hubei province, the tissue separation method was used to isolate the pathogens from root rot samples in the main planting areas of A. lancea in Hubei. Based on the preliminary identification of the Fusarium genus by the internal transcribed spacer(ITS) sequence, three housekeeping genes, EF1/EF2, Btu-F-FO1/Btu-F-RO1, and FF1/FR1, were amplified and sequenced. Subsequently, a phylogenetic tree was constructed based on these TEF gene sequences to classify the pathogens. The pathogenicity of these strains was determined using the root irrigation method. A total of 194 pathogen strains were isolated using the tissue separation method. Molecular identification using the three housekeeping genes identified the pathogens as F. solani, F. oxysporum, F. commune, F. equiseti, F. tricinctum, F. redolens, F. fujikuroi, F. avenaceum, F. acuminatum, and F. incarnatum. Among them, F. solani and F. oxysporum were the dominant strains, widely distributed in multiple regions, with F. solani accounting for approximately 54% of the total isolated strains and F. oxysporum accounting for approximately 34%. Other strains accounted for a relatively small proportion, totaling approximately 12%. The results of pathogenicity determination showed that there were certain differences in pathogenicity among strains. The analysis of the pathogenicity differentiation of the widely distributed F. solani and F. oxysporum strains revealed that these dominant strains in Hubei were mainly highly pathogenic. This study determined the species, pathogenicity, and distribution of the pathogens causing the root rot of A. lancea in Hubei province. The results provide a scientific basis for further understanding the root rot of A. lancea and its epidemic occurrence and scientifically preventing and controlling this disease.
Plant Diseases/microbiology* ; Atractylodes/microbiology* ; Phylogeny ; Plant Roots/microbiology* ; Fusarium/classification* ; China ; Virulence ; Fungal Proteins/genetics*

In order to support the implementation of the Opinions on Improving the Quality of Traditional Chinese Medicine and Promoting the High-Quality Development of the Traditional Chinese Medicine Industry and fundamentally promote the high-quality development of Chinese materia medica(CMM) industry, this article analyzed the quality and safety issues arising during the transition of CMM from wild harvesting to cultivation. Root causes of these issues were identified, including changes in the habitats of medicinal plants caused by inappropriate field cultivation patterns, excessive use of chemical inputs such as fertilizers and pesticides, and shortened cultivation periods due to rising economic costs. To address the above issues, the following countermeasures and suggestions were proposed to advance the high-quality development of CMM:(1) comprehensively adjust the cultivation patterns, vigorously promote ecological cultivation of CMM, and ensure production quality and safety of CMM from the source;(2) strengthen the breeding of high-quality, stress-resistant CMM varieties, improve cultivation techniques to reduce the use of fertilizers and pesticides, and improve the quality and efficiency of ecological cultivation of CMM;(3) systematically design the production, operation, and supervision models for ecological cultivation of CMM, carry out demonstrations of "high quality with fair price", and ensure the sustainable development of ecological cultivation of CMM.
Drugs, Chinese Herbal/standards* ; Quality Control ; Plants, Medicinal/chemistry* ; Plant Roots/chemistry* ; China ; Fertilizers/analysis* ; Materia Medica/standards* ; Medicine, Chinese Traditional/standards*

Traditional Chinese medicine(TCM) is the pillar for the development of motherland medicine, and animal medicine has a long history of application in China, characterized by wide resources, strong activity, definite efficacy, and great benefits. It has significant potential and important status in the consumption market of raw materials of TCM. In the context of global climate change, farming system alterations, and low renewability, the depletion of wild medicinal animal resources has accelerated. Accordingly, the conservation and sustainable utilization of wild resources of animal medicinal materials has become a problem that garners increasing attention and urgently needs to be solved. This paper summarizes the current situation of domestic and foreign medicinal animal breeding and research progress in industrial application in recent years and points out the issues related to standardized breeding, germplasm selection and breeding, and quality evaluation standards for medicinal animals. Furthermore, this paper discusses standardized breeding, quality standards, resource protection and utilization, and the search for alternative resources for rare and endangered medicinal animals. It proposes that researchers should systematically carry out in-depth basic research on animal medicine, improve the breeding scale and level of medicinal animals, employ modern technology to enhance the quality standards of medicinal materials, and strengthen the research and development of alternative resources. This approach aims to effectively address the relationship between protection and utilization and make a significant contribution to the sustainable development of medicinal animal resources and the animal-based Chinese medicinal material industry.
Animals ; Breeding ; China ; Medicine, Chinese Traditional ; Conservation of Natural Resources

PURPOSE: Hand-sewn anastomosis as the gold standard of vascular anastomosis cannot fully meet the requirements of vascular anastomosis in speed and quality. Various vascular couplers have been developed to ameliorate this situation. Most of them are mainly used for venous anastomosis rather than arterial anastomosis. Although it is generally acknowledged that in almost all operations involving vascular reconstruction, it is the arteries that need to be anastomosed faster and more accurately and not the veins. A dedicated device is needed for creating arterial anastomosis in an easy, timesaving, less damaging but reliable procedure. Therefore, we plan to develop a novel arterial coupler device and test pre-clinical safety and effectiveness. METHODS: In this cohort study, the rationality of this novel arterial coupler was preliminarily tested by finite element analysis before it was manufactured. Several factors restrict the use of vascular couplers in arterial anastomosis, such as arterial eversion, fixation, etc. The manufactured arterial couplers underwent in vitro and in vivo experiments. In vitro, isolated arteries of beagles were anastomosed with the assistance of an arterial coupler, and the anastomosed arteries were evaluated through anti-traction tests. In animal experiments, the bilateral femoral arteries of 5 beagles served as a control group. After dissection, the femoral artery on one side was randomly selected to be anastomosed with a quick arterial coupler (QAC) (QAC group), and the femoral artery on the other side was anastomosed by the same person using an end-to-end suture technique with a 6-0 Prolene suture (suture group). The bilateral femoral arteries of 5 beagles were used for coupler-assisted anastomosis and hand-sewn anastomosis in vivo, respectively. Success rate, blood loss, anastomotic time, clamp time, total operation time, and patency rate were recorded. The patency of anastomosed arteries was assessed using vascular Doppler ultrasound, electromagnetic flowmeter, and pathological examination (6 weeks after surgery). RESULTS: As a novel arterial coupler, QAC was successfully designed and manufactured by using poly lactic-co-glycolic acid raw materials and 3-dimensions printing technology. Its rationality was preliminarily tested through finite element analysis and related mechanical analysis methods. The isolated arteries were successfully anastomosed with the assistance of QAC in vitro testing, which showed good anti-traction properties. In animal studies, QAC-assisted arterial anastomosis has superior profiles compared to hand-sewn anastomosis in anastomotic time (7.80 ± 1.41 vs. 16.38 ± 1.04 min), clamp time (8.80 ± 1.41 vs. 14.14 ± 1.57 min), and total operation time (46.64 ± 2.38 vs. 51.96 ± 3.65 min). The results of electromagnetic flowmeter, vascular Doppler ultrasound, and pathological examination showed that QAC-assisted anastomotic arteries were superior to hand-sewn arteries in terms of postoperative blood flow (16.86 ± 3.93 vs. 10.36 ± 0.92 mL/min) and vascular patency in 6 weeks after surgery. CONCLUSION QAC is a well-designed and easily maneuverable device specialized for end-to-end arterial anastomosis. Application of this device may decrease thermal ischemia time and improve the patency of anastomotic arteries, thus, improving outcomes.
Animals ; Anastomosis, Surgical/instrumentation* ; Dogs ; Femoral Artery/surgery* ; Vascular Surgical Procedures/instrumentation* ; Finite Element Analysis

Objective To explore the effects of different glucose concentrations on the synthesis and secretion of bone collagen in osteoblasts and the impact of diabetes on bone quality in mice.Methods(1)Primary osteoblasts were extracted from the skulls of neonatal mice via collagenase digestion and cultured in four groups under different glucose concentrations:normal glucose(5.5 mmol/L),moderate glucose(11.5 mmol/L),moderate-high glucose(16.5 mmol/L),and high glucose(25 mmol/L).EdU staining was performed to evaluate cell proliferation,while the Transwell assay was used to assess cell migration.Immunofluorescence and Western blotting were performed to detect and quantitatively analyze the content of type Ⅰ collagen(Col-1).Alizarin red S(ARS)staining and alkaline phosphatase(ALP)staining were applied to assess the effects of different glucose concentrations on osteogenic differentiation.(2)Six-week-old male C57BL/6 mice were randomly divided into control group and model group(5 in each group).The model group was fed a high-fat diet for 4 weeks followed by streptozotocin(STZ)injection to establish a diabetic mouse model.The osteogenic differentiation capacity of primary osteoblasts from both groups was assessed.(3)Micro-computed tomography(Micro-CT)was employed to analyze femoral bone mineral density(BMD),bone volume/tissue volume(BV/TV),trabecular number(Tb.N),and trabecular separation(Tb.Sp).Three-point bending test was conducted to evaluate mechanical parameters including maximum load,Young's modulus,fracture energy,and stiffness.RT-qPCR was employed to assess the expression of osteogenic differentiation genes(Alp,Opn,Col1a1,and Lox).Masson staining and Mallory staining were used to evaluate Col-1 content in trabecular bone.Results(1)EdU and Transwell assay results demonstrated that with the gradual increase in glucose concentration,the proliferation and migration abilities of osteoblasts were significantly decreased(P<0.001),and the protein expression levels of Col-1 and lysyl oxidase(LOX)were significantly reduced(P<0.01 or P<0.001).ARS and ALP staining revealed that calcium salt deposition and ALP activity in osteoblasts were significantly decreased with increasing glucose concentration(P<0.05 or P<0.001).(2)Compared with control group,mice in model group exhibited typical"three polies and one weight loss"symptoms(polyuria,polydipsia,polyphagia,and weight loss)of diabetes,and ARS and ALP staining showed a significant reduction in osteoblasts(P<0.001).(3)Micro-CT and three-point bending test results indicated that,compared with control group,mice in model group showed microarchitectural deterioration of bone,decreased Tb.N,increased Tb.Sp,and significantly reduced maximum load,Young's modulus,fracture energy,and stiffness(P<0.05).RT-qPCR results showed that the relative mRNA expression levels of osteogenic differentiation genes(Alp,Opn,Col1a1,and Lox)were significantly decreased in model group compared with control group(P<0.01 or P<0.001).Masson and Mallory staining indicated a significant reduction in collagen content in model group compared with control group(P<0.01).Conclusions High-glucose environment inhibits osteoblast proliferation,differentiation,and migration.Diabetic mice exhibit reduced bone quality and increased bone fragility,potentially mediated by decreased lysyl oxidase and collagen levels.

Objective To measure the distance between the lateral compression Ⅱ(LC-Ⅱ)screw guide needle and the surrounding important structures around the anterior inferior iliac spine in pelvic fractures and to locate the needle point,so as to provide anatomical reference for clinical nail placement.Methods Totally 40 adult gross specimens of embalming were implanted with LC-Ⅱ screw guide needle under the surveillance of C-arm machine,and the specimens were dissected.The shortest distance between the insertion point and the lateral femoral cutaneous nerve,femoral nerve,femoral artery,femoral vein,anterior superior iliac spine and inguinal ligament was measured.The triangle was constructed between the insertion point,anterior superior iliac spine and inguinal ligament,and the exact location of the entry point was calculated.Results The average distance between the insertion point of the male needle and the femoral vein was(50.67±7.29)mm＞the anterior superior iliac spine(43.83±7.58)mm＞the femoral artery(38.35±6.63)mm＞the femoral nerve(31.17±1.67)mm=the inguinal ligament(28.69±6.59)mm＞the lateral femoral cutaneous nerve(7.98±3.81)mm.The mean distance between the insertion point of the female needle and the anterior superior iliac spine was(45.28±7.07)mm=femoral vein(43.72±6.89)mm＞femoral artery(33.76±6.33)mm＞femoral nerve(25.66±6.46)mm=inguinal ligament(23.22±5.00)mm＞lateral femoral cutaneous nerve(8.97±4.76)mm.The projection distance of the entry point was 31.77 mm for men and 38.41 mm for women.The Angle b was 42.81°for men and 31.71° for women.Conclusion The lateral femoral cutaneous nerve is most vulnerable to injury when LC-Ⅱ screw is inserted,and the risk of injury has nothing to do with sex.The insertion point positioning method a and b made LC-Ⅱ screw placement quickly,safely and accurately,and reduced fluoroscopy time and frequency.

Aim To investigate the mechanism of ligu aged 2 months of the same strain were used as the constilide (LIG) in delaying the senescence of auditory trol (Ctrl) group. Auditory brainstem response test was cortex and treating central presbycusis. Methods used to detect the auditory threshold of mice before and Forty C57BL/6J mice aged 13 months were randomly di after treatment. Levels of serum MDA and activity of vided into ligustilide low-dose(L-LIG) group, ligustil serum SOD were detected to display the level of oxidative ide medium-dose (M-LIG) group, ligustilide high-dose stress. The pathological changes of auditory cortex were (H-LIG) group and aging (Age) group, and 10 mice observed by HE staining. Ferroptosis was observed by

Ligustrum lucidum is a woody perennial plant of genus Ligustrum in family Oleaceae. Its dried fruit has high medicinal value. In this study, the authors evaluated the variability and species identification efficiency of three specific DAN barcodes(rbcL-accD, ycf1a, ycf1b) and four general DAN barcodes(matK, rbcL, trnH-psbA, ITS2) for a rapid and accurate molecular identification of Ligustrum species. The results revealed that matK, rbcL, trnH-psbA, ITS2 and ycf1a were inefficient for identifying the Ligustrum species, and a large number of insertions and deletions were observed in rbcL-accD sequence, which was thus unsuitable for development as specific barcode. The ycf1b-2 barcode had DNA barcoding gap and high success rate of PCR amplification and DNA sequencing, which was the most suitable DNA barcode for L. lucidum identification and achieved an accurate result. In addition, to optimize the DNA extraction experiment, the authors extracted and analyzed the DNA of the exocarp, mesocarp, endocarp and seed of L. lucidum fruit. It was found that seed was the most effective part for DNA extraction, where DNAs of high concentration and quality were obtained, meeting the needs of species identification. In this study, the experimental method for DNA extraction of L. lucidum was optimized, and the seed was determined as the optimal part for DNA extraction and ycf1b-2 was the specific DNA barcode for L. lucidum identification. This study laid a foundation for the market regulation of L. lucidum.
Ligustrum/genetics* ; Seeds ; Fruit ; Polymerase Chain Reaction ; Research Design

This study aimed to explore the anti-inflammatory material basis and molecular mechanism of Artemisia stolonifera based on the analysis of the chemical components in different extracted fractions of A. stolonifera and their antioxidant and anti-inflammatory effects in combination with network pharmacology and molecular docking. Thirty-two chemical components were identified from A. stolonifera by ultra-performance liquid chromatography coupled to tandem quadrupole time-of-flight mass spectrometry(UPLC-Q-TOF-MS). Among them, there were 7, 21 and 22 compounds in water, n-butanol and ethyl acetate fractions, respectively. The antio-xidant capacity of different extracted fractions was evaluated by measuring their scavenging ability against 1,1-diphenyl-2-picrylhydrazyl radical 2,2-diphenyl-1-(2,4,6-trinitrophenyl) hydrazyl(DPPH) and 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulphonic acid)(ABTS) free radicals and total antioxidant capacity [ferric reducing antioxidant power(FRAP) assay]. The inflammatory model of RAW264.7 cells was induced by lipopolysaccharide(LPS), and the levels of nitrite oxide(NO), tumor necrosis factor-α(TNF-α), interleukin-6(IL-6) in the supernatant and the mRNA expression of related inflammatory factors in cells were used to evaluate the anti-inflammatory effects. The results revealed that ethyl acetate fraction of A. stolonifera was the optimal antioxidant and anti-inflammatory fraction. By network pharmacology, it was found that flavonoids such as rhamnazin, eupatilin, jaceosidin, luteolin and nepetin could act on key targets such as TNF, serine/threonine protein kinase 1(AKT1), tumor protein p53(TP53), caspase-3(CASP3) and epidermal growth factor receptor(EGFR), and regulate the phosphatidylinositol-3-kinase-protein kinase B(PI3K-AKT) and mitogen-activated protein kinase(MAPK) signaling pathways to exert the anti-inflammatory effects. Molecular docking further indicated excellent binding properties between the above core components and core targets. This study preliminarily clarified the anti-inflammatory material basis and mechanism of ethyl acetate fraction of A. stolonifera, providing a basis for the follow-up clinical application of A. stolonifera and drug development.
Antioxidants/chemistry* ; Molecular Docking Simulation ; Artemisia ; Network Pharmacology ; Phosphatidylinositol 3-Kinases ; Anti-Inflammatory Agents/chemistry* ; Drugs, Chinese Herbal/pharmacology* ; Interleukin-6