ObjectiveTo evaluate the public health governance capacity in Jiangsu Province and provide an optimized pathway for the construction of a “strong, rich, beautiful, and high-quality” new Jiangsu. MethodsA total of 806 policy documents, 658 public information reports, and 148 research literatures related to public health governance capacity in Jiangsu Province from January 1995 to December 2023 were collected. The status of current public health goverance was assessed based on the evaluation criteria suitable for public health systems, and the strengths and the weaknesses of the system were identified. ResultsThe public health governance capability of Jiangsu Province was scored at 738.3 points, ranking 3rd nationally. Maternal health care and emergency response capacities achieved leading positions nationwide, both ranking 2nd. Jiangsu had exhibited a standardized guidance in the strategic level, a well-established management mechanism, an extensive coverage in information collection, and a scientifically established health targets setting. However, bottlenecks remained, including an unclear division of responsibilities across organizational departments, an insufficient public-health workforce, the absence of a stable growth mechanism for government funding investment, and difficulties in promptly identifying public needs. ConclusionJiangsu’s public-health system demonstrates leading nationally, yet several components remain underdeveloped. Future efforts should consolidate advantages while addressing weaknesses, further diversify content and forms, establish a stable funding increase mechanism, and clarify departmental functions, thereby providing solid health support for realizing the developmental goals of a “strong, rich, beautiful and high-quality” new Jiangsu.

ObjectiveTo systematically assess the public health governance capacity in Zhejiang Province, to conduct an in-depth analysis of its strengths and weaknesses, so as to provide scientific basis and strategic recommendations for further enhancement. MethodsA systematic collection of policy documents, public information reports, and research literature related to public health governance capacity in Zhejiang Province from 2002 to 2023 was conducted (encompassing a total of 1 263 policy documents, 138 pieces of information reports and 631 research articles). Based on the evaluation criteria suitable for public health systems previously developed by the research team, the basic status and magnitude of change in public health governance capacity in Zhejiang Province was evaluated. Additionally, normative gap analyses were employed to identify the strengths and weaknesses. ResultsZhejiang Province ranked 4th nationwide in terms of public health governance capacity with a score of 733.4 points (1 000.0-point maximum). The province has effectively implemented the principle of health first (scoring 698.5 points in the assessment of health-first strategy implementation) and attached sufficient importance to health-related goals (scoring 658.2 points in the scientific rationality of goal setting). However, the implementation of inter-departmental coordination and incentive mechanisms only scored 178.7 points, the feasibility of management and monitoring mechanisms scored even lower at only 144.0 points, and the coverage of incentive mechanisms scored 286.0 points. ConclusionZhejiang Province has effectively implemented its health first strategy and attached great importance to health targets, but still needs to strengthen cross-departmental coordination mechanisms and health-oriented incentives.

Objective To gain insights into the biological characteristics of different populations of Culex tritaeniorhynchus within and around the Yellow Sea wetland from the perspective of the occurrence of resistance, we investigated the levels of resistance to deltamethrin and kdr gene mutation in the wetland and its peripheral areas. Methods Specimens were collected from Cx. tritaeniorhynchus populations at two monitoring sites in the Rare Bird National Nature Reserve and Tiaozi Ni Wetland Scenic Area, and also from two populations in Yancheng City and the Liuhe District of Nanjing, and the resistance of these mosquitoes to deltamethrin was determined using the CDC biotest bottle method. For each concentration of deltamethrin assessed, a random subset of exposed specimens was selected for amplification of the kdr gene fragment, followed by Sanger sequencing to identify and analyze resistance-associated mutations. Results The LC50 levels of deltamethrin among mosquitoes from the four populations in Luhe, Yancheng, the Rare Bird National Nature Reserve and the Tiaozi Ni Wetland Scenic Area were 2.048 5, 7.798 2, 3.473 3, and 17.695 5 mg/mL, respectively, with corresponding concentrations of deltamethrin ranging from 0.005 to 5.000,0.050 to 50.000,0.050 to 25.000 and 0.050 to 50.000 mg/mL, respectively. Furthermore, the ranges of the KT50 values were 11.76-107.43, 67.05-216.30,29.77-107.43 and 28.40-329.51 min; the 1-h knockdown rates were 34.58%-99.15%, 9.52%-43.80%, 55.09%-73.01%, and 10.09%-68.07%; and the 24-h mortality rates were 12.15%-67.52%,9.52%-79.56%,13.17%-82.21%, and 11.01%-78.99%, respectively. With respect to kdr gene mutation, we assayed a total of 63,70,59, and 57 mosquitoes for the four populations, for which we detected L1014F mutation frequencies of 14.29%, 35.00%, 20.34%, and 31.58%, respectively, with a majority of these mutations being heterozygous for resistance. In addition, five adult mosquitoes were identified has having synonymous mutations at site 1011[i. e. , AAT(asparagine)mutation to AAC(asparagine)]. Conclusions Our findings revealed the clear resistance of Cx. tritaeniorhynchus to deltamethrin in the Yancheng region of the Yellow Sea wetland, and the resistance phenotype and kdr frequency of Cx. tritaeniorhynchus in the wetland environment were comparable to those of Cx. tritaeniorhynchus in the wetland environment, thereby indicating that the resistance of different populations of Cx. tritaeniorhynchus was homogeneous under the pressure of different insecticide selection within and around the wetland. However, the underlying mechanisms need to be further studied.

With the rapid development of the biopharmaceutical field, the efficient and simultaneous extraction of multiple biological components from biological samples has become a critical process for advancing scientific research. The ability to simultaneously extract various molecular components such as metabolites, DNA, RNA, and proteins is pivotal for multi-omics studies, which aim to comprehensively understand the molecular mechanisms of biological systems. Traditional methods often extract these components separately, leading to challenges such as sample loss, time consumption, contamination, and inconsistencies across different data types. In contrast, simultaneous extraction techniques address these issues by maintaining the consistency of each biological component’s physiological state, improving data reliability and facilitating integration across omic platforms. This review systematically summarizes recent advances in simultaneous extraction technologies, focusing on methods such as methanol/chloroform extraction, TRIzol reagent extraction, and modified Folch extraction, which have shown significant promise in improving the efficiency and integrity of biological sample preparation. These methods offer various advantages, such as reduced sample volume requirements, decreased contamination risk, and enhanced extraction consistency, which are crucial for studies involving small sample sizes or precious clinical specimens. Among these, methanol/chloroform extraction stands out for its simplicity, low cost, and ability to extract a wide range of biological molecules. However, it does face limitations, such as its inefficiency in extracting lipids and potential RNA contamination. On the other hand, the TRIzol reagent method has become a widely adopted technique due to its ability to simultaneously isolate RNA, proteins, and metabolites from the same sample. Despite its effectiveness, the TRIzol method has limitations in RNA quality, especially when handling complex samples or those with high protein content. Modified Folch extraction, which combines liquid-liquid extraction with commercial kits, offers a highly efficient way to extract polar metabolites, lipids, RNA, DNA, and proteins from small tissue samples. This method has proven advantageous in terms of extraction yield, especially for challenging or rare samples, although it requires precise handling to avoid cross-contamination between phases. The integration of automated platforms, microfluidics, and high-throughput systems is another exciting avenue for improving simultaneous extraction. Automation facilitates large-scale, reproducible sample processing with minimal human error, while microfluidics provides high precision in sample handling and enables real-time monitoring of extraction efficiency. These innovations not only enhance the speed and reproducibility of sample preparation but also open new possibilities for single-cell analysis, where sample volumes are often limited, and extraction efficiency is critical. In addition to the technical aspects, the review also highlights the importance of optimizing extraction protocols for specific sample types, such as clinical tissues, plants, and microorganisms. For example, the challenge of extracting multiple components from cancer tissues, where sample degradation and contamination risks are high, can be mitigated by carefully selecting extraction reagents and minimizing sample handling steps. Similarly, in plant studies, where metabolite diversity is vast, the simultaneous extraction methods must be optimized to account for the unique composition of plant tissues, which often include complex secondary metabolites and cell wall components. Looking forward, the development of more efficient and standardized simultaneous extraction methods will be crucial for advancing multi-omics research. There is a growing need for protocols that can be tailored to specific research needs, ensuring both reproducibility and flexibility in diverse applications. Additionally, combining these extraction methods with high-resolution analytical techniques such as mass spectrometry and next-generation sequencing will further enhance the potential of multi-omics studies to provide comprehensive insights into biological systems. As these technologies continue to evolve, their application in personalized medicine, environmental research, and agriculture holds great promise for addressing critical scientific challenges. In conclusion, while simultaneous extraction technologies have made significant strides, several challenges remain in optimizing extraction efficiency, ensuring reproducibility, and reducing costs. Future research should focus on refining extraction protocols, developing innovative extraction reagents, and expanding the scope of these methods to cater to a broader range of biological samples. Ultimately, the continued integration of these advanced techniques will revolutionize the way biological samples are prepared, analyzed, and understood in the context of multi-omics research.

With the rapid development of the biopharmaceutical field, the efficient and simultaneous extraction of multiple biological components from biological samples has become a critical process for advancing scientific research. The ability to simultaneously extract various molecular components such as metabolites, DNA, RNA, and proteins is pivotal for multi-omics studies, which aim to comprehensively understand the molecular mechanisms of biological systems. Traditional methods often extract these components separately, leading to challenges such as sample loss, time consumption, contamination, and inconsistencies across different data types. In contrast, simultaneous extraction techniques address these issues by maintaining the consistency of each biological component’s physiological state, improving data reliability and facilitating integration across omic platforms. This review systematically summarizes recent advances in simultaneous extraction technologies, focusing on methods such as methanol/chloroform extraction, TRIzol reagent extraction, and modified Folch extraction, which have shown significant promise in improving the efficiency and integrity of biological sample preparation. These methods offer various advantages, such as reduced sample volume requirements, decreased contamination risk, and enhanced extraction consistency, which are crucial for studies involving small sample sizes or precious clinical specimens. Among these, methanol/chloroform extraction stands out for its simplicity, low cost, and ability to extract a wide range of biological molecules. However, it does face limitations, such as its inefficiency in extracting lipids and potential RNA contamination. On the other hand, the TRIzol reagent method has become a widely adopted technique due to its ability to simultaneously isolate RNA, proteins, and metabolites from the same sample. Despite its effectiveness, the TRIzol method has limitations in RNA quality, especially when handling complex samples or those with high protein content. Modified Folch extraction, which combines liquid-liquid extraction with commercial kits, offers a highly efficient way to extract polar metabolites, lipids, RNA, DNA, and proteins from small tissue samples. This method has proven advantageous in terms of extraction yield, especially for challenging or rare samples, although it requires precise handling to avoid cross-contamination between phases. The integration of automated platforms, microfluidics, and high-throughput systems is another exciting avenue for improving simultaneous extraction. Automation facilitates large-scale, reproducible sample processing with minimal human error, while microfluidics provides high precision in sample handling and enables real-time monitoring of extraction efficiency. These innovations not only enhance the speed and reproducibility of sample preparation but also open new possibilities for single-cell analysis, where sample volumes are often limited, and extraction efficiency is critical. In addition to the technical aspects, the review also highlights the importance of optimizing extraction protocols for specific sample types, such as clinical tissues, plants, and microorganisms. For example, the challenge of extracting multiple components from cancer tissues, where sample degradation and contamination risks are high, can be mitigated by carefully selecting extraction reagents and minimizing sample handling steps. Similarly, in plant studies, where metabolite diversity is vast, the simultaneous extraction methods must be optimized to account for the unique composition of plant tissues, which often include complex secondary metabolites and cell wall components. Looking forward, the development of more efficient and standardized simultaneous extraction methods will be crucial for advancing multi-omics research. There is a growing need for protocols that can be tailored to specific research needs, ensuring both reproducibility and flexibility in diverse applications. Additionally, combining these extraction methods with high-resolution analytical techniques such as mass spectrometry and next-generation sequencing will further enhance the potential of multi-omics studies to provide comprehensive insights into biological systems. As these technologies continue to evolve, their application in personalized medicine, environmental research, and agriculture holds great promise for addressing critical scientific challenges. In conclusion, while simultaneous extraction technologies have made significant strides, several challenges remain in optimizing extraction efficiency, ensuring reproducibility, and reducing costs. Future research should focus on refining extraction protocols, developing innovative extraction reagents, and expanding the scope of these methods to cater to a broader range of biological samples. Ultimately, the continued integration of these advanced techniques will revolutionize the way biological samples are prepared, analyzed, and understood in the context of multi-omics research.

Eight compounds were isolated and purified from the ethyl acetate part of 70% acetone extract of Rehmannia glutinosa by various chromatographic techniques such as silica gel, MCI gel CHP-20, ODS, Toyopearl HW-40C, combined with TLC and semi-preparative HPLC. Their structures were elucidated by modern spectroscopy techniques (NMR, MS, UV, IR), and identified as neomartynoside A (1), osmanthuside B₆ (2), martynoside (3), isomartynoside (4), (E)-p-hydroxycinnamic acid (5), caffeic acid (6), ferulic acid (7), and methyl caffeate (8). Compound 1 is a new phenylethanol glycoside, which was identified as neomartynoside A. Compound 2 was isolated from Rehmannia glutinosa for the first time. In addition, compounds 2, 6 and 7 significantly increased relative glucose consumption, showing potential hypoglycemic activity.

With the rapid development of competitive sports, the incidence of anterior cruciate ligament (ACL) injury is on the rise. Such injuries may shorten athletes′ career and lead to other long-term adverse consequences. Although athletes generally recover well after ACL reconstruction, many still struggle to return to their pre-injury performance levels. Advances in the understanding of ACL anatomy and injury mechanisms, along with the evolution of surgical techniques and rehabilitation methods, have provided more individualized and tailored options for athletes following ACL injuries. However, there is currently no consensus in China regarding surgical and rehabilitation strategies for competitive athletes aiming to return to sports after ACL injuries. To this end, the Sports Medicine Committee of the Chinese Research Hospital Association and the Editorial Board of the Chinese Journal of Trauma jointly formulated the Expert consensus on surgical treatment and rehabilitation for competitive sports athletes returning to sports after anterior cruciate ligament injury ( version 2025), and presented 14 recommendations covering surgical indications, preoperative rehabilitation, surgical timing, surgical strategies and postoperative rehabilitation strategies, aiming to improve the surgical treatment and rehabilitation system for ACL injuries in competitive athletes and facilitate their return to high-level sports performance after injury.

Objective To assess the effectiveness of the evaluation of military physical function(EMPF)system in predicting the occurrence of military training injuries among new recruits to provide scientific guidance and methodological choice for military training.Methods A total of 527 new recruits from 5 grassroots units from July 2016 to February 2018 were selected for the study.The recruits underwent EMPF testing,and their military training injuries were monitored over a 2-year follow-up period.Those who sustained injuries during training were divided into injury group(n=163),while the remaining recruits were placed in healthy group(n=364).The predictive ability of the total EMPF score for training injuries was assessed using the receiver operating characteristic curve(ROC),and the correlation between the total EMPF score,individual test scores,and military training injuries were analyzed using binary logistic regression.Results The total EMPF score of new recruits in injury group(19.52±1.97)was significantly lower than that of healthy group(24.31±1.54)(P<0.001),which also demonstrated a high diagnostic value in predicting the risk of military training injuries,with an area under the curve(AUC)of ROC of 0.971(P<0.001).A cut-off value of 22 scores was found to have the highest accuracy in predicting future training injuries,with an odds ratio(OR)of 25.63,sensitivity of 0.939,specificity of 0.879,positive likelihood ratio of 7.76,and a post-test probability of 0.67.Binary logistic regression analysis revealed that 6 EMPF tests,including holding the ball over and leaning back,bending forward and touching the ground with the ball,lunge squat and twist,swallow balance with holding the ball afterward,vertical jump,and respiratory pattern assessment,were negatively associated with the risk of military training injuries(P<0.0001).Conclusion The EMPF system can effectively predict the risk of military training injuries,with military personnel whose total EMPF score is less than 22 being at higher risk of sustaining such injuries.

This study was aimed at investigating the effects of demethylase fat mass and obesity-associated protein(FTO)and methyltransferase methyltransferase like protein 3(METTL3),key molecules in N6-methyladenosine(m6A)modification,on the replication and proliferation of Japanese encephalitis virus(JEV).Recombinant lentiviruses were generated by packaging the FTO and green fluorescent protein into lentiviral vectors.Neuro2a cells,a mouse neuroblastoma cell line,were infected with the lentivirus,and stable FTO-expressing cell lines were obtained through puromycin selection.Successful overexpression of FTO was confirmed through fluorescence microscopy,real-time quantitative PCR,and western blot analysis.When Neuro2a cells overexpressing FTO were infected with JEV,the overexpression of FTO decreased JEV replication in the cells,and increased the expression of interferon(IFN)and related molecules.Additionally,treatment of JEV-infected Neuro2a cells with the METTL3-specific inhibitor STM2457 resulted in a dose-dependent decrease in JEV replication and viral protein expression.These findings suggested that lowering m6A methylation levels inhibits JEV replication,thus shedding light on the regulatory role of methylation modification in JEV replication.

Objective To quantify the volume and movement of cardiac substructures by using coronary computed tomography angiography(CCTA)to provide guidance for the design of deep inspiratory breath-holding radiation therapy for left breast cancer and the protection of organs at risk.Methods Totally 18 female patients who received conventional chest plain scan and CCTA were selected to simulate the design process of radiotherapy plan for left breast cancer patients with internal mammary lymph nodes.Retrospective reconstruction of CCTA data was performed for each patient,with 10 phase images(with an interval of 10％)within a R-R cardiac cycle(10％-100％)to simulate the true range of motion of the heart.The heart,left atrium(LA),left ventricle(LV),right atrium(RA),right ventricle(RV),left anterior descending artery(LAD),left circumflex coronary artery(LCX)and right coronary artery(RCA)were contoured at each phase.The distances from the centroid position to the average position of LAD,LCX and RCA were measured at each phase in the superior-inferior(SI),anterior-posterior(AP)and left-right(LR).The average volume and range of volume changes of LA,LV,RA,RV and heart were analyzed within a cardiac cycle.The expansion margins of planning organs at risk volume(PRV)were calculated.SPSS 19.0 software was used for statistical analysis.Results The following average absolute displacements were found in SI,AP and LR coordinates:(1.8±0.7)mm,(1.2±0.5)mm and(1.5±0.5)mm for LAD,respectively;(2.1±0.7)mm,(1.5±0.6)mm and(1.9±0.7)mm for LCX,respectively;(1.6±0.5)mm,(2.2±0.9)mm and(2.2±0.8)mm for RCA,respectively.The volume changes of LA,LV,RA,RV and heart within a cardiac cycle ranged from 34.3 to 63.9 cm3,122.1 to 154.3 cm3,29.3 to 53.6 cm3,57.2 to 94.3 cm3 and 480.1 to 515.4 cm3,respectively.The theoretical expansion margins of LAD,LCX and RCA in all the three directions were within 2 mm.Conclusion The ranges of movement and volume changes of cardiac substructure are quantitati-vely displayed,and references are provided for the planning of deep inspiratory breath-holding radiation therapy for left breast cancer and the protection of organs at risk.[Chinese Medical Equipment Journal,2025,46(3):54-58]