In modern society， the comorbidity of insomnia with amnesia has shown a significantly increasing incidence and become increasingly severe， emerging as a public health issue that endangers people's physical and mental health and quality of life. Anmei Dan （AMD）， originally recorded in the Shishi Milu by CHEN Shiduo in the Qing Dynasty， possesses profound theoretical foundations and distinct clinical advantages in ameliorating insomnia with amnesia. Basic research has unequivocally confirmed its definite therapeutic effects on insomnia with amnesia and revealed partial mechanisms. AMD is therefore a veritable classic prescription embodying the principle of treating different diseases with the same method for insomnia and amnesia. However， few researchers have reviewed the related research progress. This article systematically summarized the theoretical connotations of traditional Chinese medicine in treating insomnia with amnesia， delineated the multi-component material basis of AMD in ameliorating insomnia with amnesia （including various chemical components such as ginsenosides， jujubosides， and salvianolic acids）， and evaluate its multi-dimensional clinical efficacy （e.g.， prolonging total sleep time， improving sleep efficiency， and enhancing memory）. Moreover， it systematically summarizes the multi-pathway mechanisms of action. The results indicate that AMD has a clear material basis， definite clinical efficacy， and a favorable safety profile in ameliorating insomnia and amnesia. AMD may exert the therapeutic effect by regulating sleep-wake rhythms， enhancing synaptic plasticity， inhibiting neuroimmune inflammation， and modulating autophagy， oxidative stress， and energy metabolism. In conclusion， AMD exerts synergistic effects through multi-component， multi-dimensional， and multi-pathway approaches， serving as an important prescription for enriching and developing the theory of treating different diseases with the same method for insomnia with amnesia.

Sophorae Flavescentis Radix is one of the commonly used traditional Chinese medicine in China, and a large amount of pharmaceutical residue generated during its processing and production is discarded as waste, which not only wastes resources but also pollutes the environment. Therefore, elucidating the chemical composition of the residue of Sophorae Flavescentis Radix and the differences between the residue and Sophorae Flavescentis Radix itself is of great significance for the comprehensive utilization of the residue. This study, based on ultra-performance liquid chromatography-quadrupole time-of-flight mass spectrometry(UPLC-Q-TOF-MS) technology combined with multivariate statistical methods, provides a thorough characterization, identification, and differential analysis of the overall components of Sophorae Flavescentis Radix and its residue. Firstly, 61 compounds in Sophorae Flavescentis Radix were rapidly identified based on their precise molecular weight, fragment ions, and compound abundance, using a self-constructed compound database. Among them, 41 compounds were found in the residue, mainly alkaloids and flavonoids. Secondly, through principal component analysis(PCA) and orthogonal partial least squares discriminant analysis(OPLS-DA), 15 key compounds differentiating Sophorae Flavescentis Radix from its residue were identified. These included highly polar alkaloids, such as oxymatrine and oxysophocarpine, which showed significantly reduced content in the residue, and less polar flavonoids, such as kurarinone and kuraridin, which were more abundant in the residue. In summary, this paper clarifies the overall composition, structure, and content differences between Sophorae Flavescentis Radix and its residue, suggesting that the residue of Sophorae Flavescentis Radix can be used as a raw material for the extraction of its high-activity components, with promising potential for development and application in cosmetics and daily care. This research provides a scientific basis for the future comprehensive utilization of Sophorae Flavescentis Radix and its residue.
Drugs, Chinese Herbal/chemistry* ; Chromatography, High Pressure Liquid/methods* ; Mass Spectrometry/methods* ; Sophora/chemistry* ; Flavonoids/chemistry* ; Alkaloids/chemistry*

This study was aimed at identifying the pathogenic bacteria responsible for the death of a young tiger at the Fujian Meihua Mountain South China Tiger Breeding Research Institute.Tissue samples from the lungs,liver,and intestines of the deceased tiger were collected,and the bacteria were cultured inasterile environment.The bacterial strains were characterized according to their morphological and molecular biological properties,including assessment of virulence genes and antibiotic resistance genes,mouse lethality tests,and antibiotic susceptibility evaluations.A predominant bacterial strain isolated from the liver of the deceased tiger was identified as enterotoxigenic Escherichia coli(ETEC)strain Tiger22513F.Phylogenetic analysis of the 16S rRNA gene revealed that the Tiger22513F strain exhibited close genetic similarity to the reference strain ETEC(MF919609.1),with 99.9%nucleotide similarity,and resided on the same evolutionary branch.The Tiger22513F strain contained 11 antibiotic resistance genes(tetA,sul1,sul3,cmlA,floR,blaTEM,blaSHV,blaCMY-2,qnrA,qnrS,and qnrD)along with five virulence genes(VT1,fyuA,tsh,iucD,and ST).Mouse lethality tests indicated significant pathogenicity toward mice,affecting primarily the lungs,liver,and intestines.Antibiotic susceptibility testing demonstrated that this strain exhibited resistance to various classes of beta-lactam antibiotics,as well as quinolones and aminoglycosides.This investigation successfully isolated a multi-drug resistant enterotoxigenic Escherichia coli strain with pronounced pathogenicity from the liver of a deceased tiger;thus providing valuable scientific insights for clinical diagnosis,as well as prevention and control measures,against ETEC infections in South China tigers.

This study was aimed at identifying the pathogenic bacteria responsible for the death of a young tiger at the Fujian Meihua Mountain South China Tiger Breeding Research Institute.Tissue samples from the lungs,liver,and intestines of the deceased tiger were collected,and the bacteria were cultured inasterile environment.The bacterial strains were characterized according to their morphological and molecular biological properties,including assessment of virulence genes and antibiotic resistance genes,mouse lethality tests,and antibiotic susceptibility evaluations.A predominant bacterial strain isolated from the liver of the deceased tiger was identified as enterotoxigenic Escherichia coli(ETEC)strain Tiger22513F.Phylogenetic analysis of the 16S rRNA gene revealed that the Tiger22513F strain exhibited close genetic similarity to the reference strain ETEC(MF919609.1),with 99.9%nucleotide similarity,and resided on the same evolutionary branch.The Tiger22513F strain contained 11 antibiotic resistance genes(tetA,sul1,sul3,cmlA,floR,blaTEM,blaSHV,blaCMY-2,qnrA,qnrS,and qnrD)along with five virulence genes(VT1,fyuA,tsh,iucD,and ST).Mouse lethality tests indicated significant pathogenicity toward mice,affecting primarily the lungs,liver,and intestines.Antibiotic susceptibility testing demonstrated that this strain exhibited resistance to various classes of beta-lactam antibiotics,as well as quinolones and aminoglycosides.This investigation successfully isolated a multi-drug resistant enterotoxigenic Escherichia coli strain with pronounced pathogenicity from the liver of a deceased tiger;thus providing valuable scientific insights for clinical diagnosis,as well as prevention and control measures,against ETEC infections in South China tigers.

This study aims to identify the main chemical compounds, investigate the effects of different drying methods on the quality, and determine the appropriate drying method of Callicarpae Nudiflorae Folium. UPLC-UV-Q-TOF-MS was employed to characterize and identify 35 main compounds, including phenylethanoid glycosides, flavonoids, and iridoids in Callicarpae Nudiflorae Folium. A method for the simultaneous determination of 8 compounds with strong UV absorption and high content was established to evaluate the quality of Callicarpae Nudiflorae Folium dried by different methods. UPLC-UV-Q-TOF-MS combined with principal component analysis(PCA) was employed to compare the Callicarpae Nudiflorae Folium samples treated by microwave drying at different power(119, 231, and 385 W), drying in the shade, sun drying, and oven drying at different temperatures(50, 60, 70, 80, 90, and 100 ℃). The total content of decaffeoyl acteoside, picroside Ⅲ, galuteolin, forsythin B, acteoside, isoacteoside, 6-hydroxyluteolin-7-glucoside, and caffeic acid in Callicarpae Nudiflorae Folium, as well as the content of most compounds, decreased with the rise in drying temperature and with the decrease in microwave power. Considering the content of compounds, low carbon, and energy saving, microwave drying at 231 W, low-temperature drying, or natural drying is recommended for the production of Callicarpae Nudiflorae Folium. This study provides a scientific basis for the selection of drying methods for Callicarpae Nudiflorae Folium at the place of origin and for the improvement of quality standards.
Desiccation/methods* ; Drugs, Chinese Herbal/chemistry* ; Callicarpa/chemistry* ; Plant Leaves/chemistry* ; Chromatography, High Pressure Liquid ; Flavonoids/analysis* ; Microwaves ; Mass Spectrometry

Objective To analyze the stress changes of thoracic vertebra(T)11-sacrum(S)titanium rods in patients with ankylosing spondylitis after vertebral column decancellation(VCD)osteotomy,and provide reference for the selection and improvement of titanium rods before surgery.Methods The original data of the continuous scanning tomographic images of patients with ankylosing spondylitis after VCD osteotomy were imported into Mimics 21.0 in DICOM format,and T11-S vertebrae,screws and titanium rods were respectively reconstructed.They were imported into 3-Matic to establish a preliminary geometric modeling,and then processed with noise removal,paving,smoothing,etc.The improved model was imported into Hypermesh 10 software for grid division,and the material was imported into ANSYS 19.2 to display the finite element model after attribute assignment,Set the boundary and load conditions,and measure the stress value at the connection between the screw and the titanium rod.Results Under neutral position,forward bending,lateral bending,and axial rotation conditions,the titanium rod had the highest stress at the upper vertebrae(T11)and the lowest stress at the top vertebrae(L3);Under the backward extension condition,the titanium rod has the highest stress at the lower end vertebra(L5).Conclusion In the upper and lower vertebrae,it is possible to consider increasing the diameter of the titanium rod,enhancing its hardness,or changing it to a double rod.

Objective To establish a normal three-dimensional model of the hip bone in adolescents aged 10-19 years old,analyze the morphology and positional parameters of the posterior superior iliac spine of the hip bone among different genders,sides,and ages,which can supplement the study of the anatomical morphology of the hip bone and to provide a reference for the diagnosis of the clinically relevant diseases and for the therapeutic manipulation and localization of the hip bone.Methods Forty adolescent patients aged 10-19 years without previous spinal pelvic diseases were selected,and the pelvic CT image data were collected and imported into Mimics 21.0 software to establish the model.The relative position parameters of the posterior superior iliac spine and the surrounding anatomical landmarks included the length from the posterior superior iliac spine to the anterior superior iliac spine(ab),the length from the tip of the posterior superior iliac spine to the sciatica(ac),the length from the tip of the posterior superior iliac spine to the pubic tubercle(ae),the length from the tip of the posterior superior iliac spine to the midpoint of the posterior margin of the auricular joint surfaces(af),the length from the tip of the posterior superior iliac spine to the iliac spine turn(ag),and the length from the sciatica tubercle to the highest point of the iliac spine(cd).The local parameters of the posterior superior iliac spine included the width(W0)and the thickness(H0)at point A.The maximum width of the posterior iliac spine(WMAX),its distance from point a(D0),and the width of the iliac spine were measured at 0.5,1,and 1.5 cm from point a,and were recorded sequentially as W1,W2,and W3.The width of the iliac spine at the turn of the iliac spine(point g)was measured(W4).The relative positions and parameters of the posterior superior iliac spine to the surrounding anatomical landmarks and the localized parameters of the posterior superior iliac spine were compared sequentially for different genders,sides,and age groups.Results In the measurement result of the parameters of the posterior superior iliac spine and the surrounding anatomical landmarks,the differences in the comparisons between different genders of the ac,ae,and af indexes were statistically significant(P＜0.05),and the differences in the comparisons between different genders of the ab,ag,and cd indexes were not statistically significant(P＞0.05).The differences in the comparisons between the right and left sides of the ab,ac,ae,af,ag,and cd indexes were not statistically significant(P＞0.05).The difference in comparison between different age groups of ab,ac,ae,af,ag,and cd indicators was statistically significant(P＜0.05).In the measurement result of the local parameters of the posterior superior iliac spine,the difference in the comparison between the sexes of the W0,W1,W2,WMAX,and H0 indexes was statistically significant(P＜0.05),and the difference in the comparison between the sexes of the W3,W4,and D0 indexes was not statistically significant(P＞0.05);And the difference in the comparison between the left and right sides of the W0,W1,W2,and the right and left sides of the W3,W4,WMAX,D0,and H0 indexes was not statistically significant(P＞0.05);The difference between W0,W1,W2,W3,W4,WMAX,D0,H0 indicators compared between different age groups was not statistically significant(P＞0.05).Conclusion Adolescent females have overall greater pelvic parameters than males,with wider and thicker tips of the posterior superior iliac spine in females and narrower and thinner tips of the posterior superior iliac spine in males;Pelvic parameters show a tendency to increase with age,while the width and thickness of the posterior superior iliac spine,as well as the width of the cephalic end to the iliac spine remain essentially unchanged.

Objective To measure the distance between the lateral compression Ⅱ(LC-Ⅱ)screw guide needle and the surrounding important structures around the anterior inferior iliac spine in pelvic fractures and to locate the needle point,so as to provide anatomical reference for clinical nail placement.Methods Totally 40 adult gross specimens of embalming were implanted with LC-Ⅱ screw guide needle under the surveillance of C-arm machine,and the specimens were dissected.The shortest distance between the insertion point and the lateral femoral cutaneous nerve,femoral nerve,femoral artery,femoral vein,anterior superior iliac spine and inguinal ligament was measured.The triangle was constructed between the insertion point,anterior superior iliac spine and inguinal ligament,and the exact location of the entry point was calculated.Results The average distance between the insertion point of the male needle and the femoral vein was(50.67±7.29)mm＞the anterior superior iliac spine(43.83±7.58)mm＞the femoral artery(38.35±6.63)mm＞the femoral nerve(31.17±1.67)mm=the inguinal ligament(28.69±6.59)mm＞the lateral femoral cutaneous nerve(7.98±3.81)mm.The mean distance between the insertion point of the female needle and the anterior superior iliac spine was(45.28±7.07)mm=femoral vein(43.72±6.89)mm＞femoral artery(33.76±6.33)mm＞femoral nerve(25.66±6.46)mm=inguinal ligament(23.22±5.00)mm＞lateral femoral cutaneous nerve(8.97±4.76)mm.The projection distance of the entry point was 31.77 mm for men and 38.41 mm for women.The Angle b was 42.81°for men and 31.71° for women.Conclusion The lateral femoral cutaneous nerve is most vulnerable to injury when LC-Ⅱ screw is inserted,and the risk of injury has nothing to do with sex.The insertion point positioning method a and b made LC-Ⅱ screw placement quickly,safely and accurately,and reduced fluoroscopy time and frequency.

OBJECTIVES: To study the application value of transport ventilator in the inter-hospital transport of critically ill children. METHODS: The critically ill children in Hunan Children's Hospital who were transported with or without a transport ventilator were included as the observation group (from January 2019 to January 2020; n=122) and the control group (from January 2018 to January 2019; n=120), respectively. The two groups were compared in terms of general data, the changes in heart rate, respiratory rate, and blood oxygen saturation during transport, the incidence rates of adverse events, and outcomes. RESULTS: There were no significant differences between the two groups in sex, age, oxygenation index, pediatric critical illness score, course of disease, primary disease, heart rate, respiratory rate, and transcutaneous oxygen saturation before transport (P>0.05). During transport, there were no significant differences between the two groups in the changes in heart rate, respiratory rate, and transcutaneous oxygen saturation (P>0.05). The incidence rates of tracheal catheter detachment, indwelling needle detachment, and sudden cardiac arrest in the observation group were lower than those in the control group during transport, but the difference was not statistically significant (P>0.05). Compared with the control group, the observation group had significantly shorter duration of mechanical ventilation and length of stay in the pediatric intensive care unit and significantly higher transport success rate and cure/improvement rate (P<0.05). CONCLUSIONS The application of transport ventilator in the inter-hospital transport can improve the success rate of inter-hospital transport and the prognosis in critically ill children, and therefore, it holds promise for clinical application in the inter-hospital transport of critically ill children.
Child ; Humans ; Critical Illness ; Respiration, Artificial/adverse effects* ; Intensive Care Units, Pediatric ; Ventilators, Mechanical ; Prognosis

Objective: To explore the effects of three-dimensional (3D) bioprinting gelatin methacrylamide (GelMA) hydrogel loaded with nano silver on full-thickness skin defect wounds in rats. Methods: The experimental research method was adopted. The morphology, particle diameter, and distribution of silver nanoparticles in nano silver solution with different mass concentrations and the pore structure of silver-containing GelMA hydrogel with different final mass fractions of GelMA were observed by scanning electron microscope and the pore size was calculated. On treatment day 1, 3, 7, and 14, the concentration of nano silver released from the hydrogel containing GelMA with final mass fraction of 15% and nano silver with final mass concentration of 10 mg/L was detected by mass spectrometer. At 24 h of culture, the diameters of inhibition zone of GelMA hydrogel containing final mass concentration of 0 (no nano silver), 25, 50, and 100 mg/L nano silver against Staphylococcus aureus and Escherichia coli were detected. Fibroblasts (Fbs) and adipose stem cells (ASCs) were isolated respectively by enzymatic digestion using the discarded prepuce after circumcision from a 5-year-old healthy boy who was treated in the Department of Urology of the Second Affiliated Hospital of Zhejiang University School of Medicine in July 2020, and the discarded fat tissue after liposuction from a 23-year-old healthy woman who was treated in the Department of Plastic Surgery of the Hospital in July 2020. The Fbs were divided into blank control group (culture medium only), 2 mg/L nano sliver group, 5 mg/L nano sliver group, 10 mg/L nano sliver group, 25 mg/L nano sliver group, and 50 mg/L nano sliver group, which were added with the corresponding final mass concentrations of nano sliver solution, respectively. At 48 h of culture, the Fb proliferation viability was detected by cell counting kit 8 method. The Fbs were divided into 0 mg/L silver-containing GelMA hydrogel group, 10 mg/L silver-containing GelMA hydrogel group, 50 mg/L silver-containing GelMA hydrogel group, and 100 mg/L silver-containing GelMA hydrogel group and then were correspondingly treated. On culture day 1, 3, and 7, the Fb proliferation viability was detected as before. The ASCs were mixed into GelMA hydrogel and divided into 3D bioprinting group and non-printing group. On culture day 1, 3, and 7, the ASC proliferation viability was detected as before and cell growth was observed by live/dead cell fluorescence staining. The sample numbers in the above experiments were all 3. Four full-thickness skin defect wounds were produced on the back of 18 male Sprague-Dawley rats aged 4 to 6 weeks. The wounds were divided into hydrogel alone group, hydrogel/nano sliver group, hydrogel scaffold/nano sliver group, and hydrogel scaffold/nano sliver/ASC group, and transplanted with the corresponding scaffolds, respectively. On post injury day (PID) 4, 7, 14, and 21, the wound healing was observed and the wound healing rate was calculated (n=6). On PID 7 and 14, histopathological changes of wounds were observed by hematoxylin eosin staining (n=6). On PID 21, collagen deposition of wounds was observed by Masson staining (n=3). Data were statistically analyzed with one-way analysis of variance, analysis of variance for repeated measurement, Bonferroni correction, and independent sample t test. Results: The sliver nano particles in nano silver solution with different mass concentrations were all round, in scattered distribution and uniform in size. The silver-containing GelMA hydrogels with different final mass fractions of GelMA all showed pore structures of different sizes and interconnections. The pore size of silver-containing GelMA hydrogel with 10% final mass fraction was significantly larger than that of silver-containing GelMA hydrogels with 15% and 20% final mass fractions (with P values both below 0.05). On treatment day 1, 3, and 7, the concentration of nano silver released from silver-containing GelMA hydrogel in vitro showed a relatively flat trend. On treatment day 14, the concentration of released nano silver in vitro increased rapidly. At 24 h of culture, the diameters of inhibition zone of GelMA hydrogel containing 0, 25, 50, and 100 mg/L nano silver against Staphylococcus aureus and Escherichia coli were 0, 0, 0.7, and 2.1 mm and 0, 1.4, 3.2, and 3.3 mm, respectively. At 48 h of culture, the proliferation activity of Fbs in 2 mg/L nano silver group and 5 mg/L nano silver group was both significantly higher than that in blank control group (P<0.05), and the proliferation activity of Fbs in 10 mg/L nano silver group, 25 mg/L nano silver group, and 50 mg/L nano silver group was all significantly lower than that in blank control group (P<0.05). Compared with the that of Fbs in 0 mg/L silver-containing GelMA hydrogel group, the proliferation activity of Fbs in 50 mg/L silver-containing GelMA hydrogel group and 100 mg/L silver-containing GelMA hydrogel group was all significantly decreased on culture day 1 (P<0.05); the proliferation activity of Fbs in 50 mg/L silver-containing GelMA hydrogel group was significantly increased (P<0.05), while the proliferation activity of Fbs in 100 mg/L silver-containing GelMA hydrogel group was significantly decreased on culture day 3 (P<0.05); the proliferation activity of Fbs in 100 mg/L silver-containing GelMA hydrogel group was significantly decreased on culture day 7 (P<0.05). The proliferation activity of ASCs in 3D bioprinting group show no statistically significant differences to that in non-printing group on culture day 1 (P>0.05). The proliferation activity of ASCs in 3D bioprinting group was significantly higher than that in non-printing group on culture day 3 and 7 (with t values of 21.50 and 12.95, respectively, P<0.05). On culture day 1, the number of dead ASCs in 3D bioprinting group was slightly more than that in non-printing group. On culture day 3 and 5, the majority of ASCs in 3D bioprinting group and non-printing group were living cells. On PID 4, the wounds of rats in hydrogel alone group and hydrogel/nano sliver group had more exudation, and the wounds of rats in hydrogel scaffold/nano sliver group and hydrogel scaffold/nano sliver/ASC group were dry without obvious signs of infection. On PID 7, there was still a small amount of exudation on the wounds of rats in hydrogel alone group and hydrogel/nano sliver group, while the wounds of rats in hydrogel scaffold/nano sliver group and hydrogel scaffold/nano sliver/ASC group were dry and scabbed. On PID 14, the hydrogels on the wound surface of rats in the four groups all fell off. On PID 21, a small area of wounds remained unhealed in hydrogel alone group. On PID 4 and 7, the wound healing rates of rats in hydrogel scaffold/nano sliver/ASC group were significantly higher than those of the other three groups (P<0.05). On PID 14, the wound healing rate of rats in hydrogel scaffold/nano sliver/ASC group was significantly higher than the wound healing rates in hydrogel alone group and hydrogel/nano sliver group (all P<0.05). On PID 21, the wound healing rate of rats in hydrogel alone group was significantly lower than that in hydrogel scaffold/nano sliver/ASC group (P<0.05). On PID 7, the hydrogels on the wound surface of rats in the four groups remained in place; on PID 14, the hydrogel in hydrogel alone group was separated from the wounds of rats, while some hydrogels still existed in the new tissue of the wounds of rats in the other three groups. On PID 21, the collagen arrangement in the wounds of rats in hydrogel alone group was out of order, while the collagen arrangement in the wounds of rats in hydrogel/nano sliver group, and hydrogel scaffold/nano sliver/ASC group was relatively orderly. Conclusions: Silver-containing GelMA hydrogel has good biocompatibility and antibacterial properties. Its three-dimensional bioprinted double-layer structure can better integrate with new formed tissue in the full-thickness skin defect wounds in rats and promote wound healing.
Male ; Rats ; Animals ; Humans ; Hydrogels/pharmacology* ; Bioprinting ; Metal Nanoparticles ; Rats, Sprague-Dawley ; Silver/pharmacology* ; Soft Tissue Injuries ; Anti-Bacterial Agents