With the rapid development of the biopharmaceutical field, the efficient and simultaneous extraction of multiple biological components from biological samples has become a critical process for advancing scientific research. The ability to simultaneously extract various molecular components such as metabolites, DNA, RNA, and proteins is pivotal for multi-omics studies, which aim to comprehensively understand the molecular mechanisms of biological systems. Traditional methods often extract these components separately, leading to challenges such as sample loss, time consumption, contamination, and inconsistencies across different data types. In contrast, simultaneous extraction techniques address these issues by maintaining the consistency of each biological component’s physiological state, improving data reliability and facilitating integration across omic platforms. This review systematically summarizes recent advances in simultaneous extraction technologies, focusing on methods such as methanol/chloroform extraction, TRIzol reagent extraction, and modified Folch extraction, which have shown significant promise in improving the efficiency and integrity of biological sample preparation. These methods offer various advantages, such as reduced sample volume requirements, decreased contamination risk, and enhanced extraction consistency, which are crucial for studies involving small sample sizes or precious clinical specimens. Among these, methanol/chloroform extraction stands out for its simplicity, low cost, and ability to extract a wide range of biological molecules. However, it does face limitations, such as its inefficiency in extracting lipids and potential RNA contamination. On the other hand, the TRIzol reagent method has become a widely adopted technique due to its ability to simultaneously isolate RNA, proteins, and metabolites from the same sample. Despite its effectiveness, the TRIzol method has limitations in RNA quality, especially when handling complex samples or those with high protein content. Modified Folch extraction, which combines liquid-liquid extraction with commercial kits, offers a highly efficient way to extract polar metabolites, lipids, RNA, DNA, and proteins from small tissue samples. This method has proven advantageous in terms of extraction yield, especially for challenging or rare samples, although it requires precise handling to avoid cross-contamination between phases. The integration of automated platforms, microfluidics, and high-throughput systems is another exciting avenue for improving simultaneous extraction. Automation facilitates large-scale, reproducible sample processing with minimal human error, while microfluidics provides high precision in sample handling and enables real-time monitoring of extraction efficiency. These innovations not only enhance the speed and reproducibility of sample preparation but also open new possibilities for single-cell analysis, where sample volumes are often limited, and extraction efficiency is critical. In addition to the technical aspects, the review also highlights the importance of optimizing extraction protocols for specific sample types, such as clinical tissues, plants, and microorganisms. For example, the challenge of extracting multiple components from cancer tissues, where sample degradation and contamination risks are high, can be mitigated by carefully selecting extraction reagents and minimizing sample handling steps. Similarly, in plant studies, where metabolite diversity is vast, the simultaneous extraction methods must be optimized to account for the unique composition of plant tissues, which often include complex secondary metabolites and cell wall components. Looking forward, the development of more efficient and standardized simultaneous extraction methods will be crucial for advancing multi-omics research. There is a growing need for protocols that can be tailored to specific research needs, ensuring both reproducibility and flexibility in diverse applications. Additionally, combining these extraction methods with high-resolution analytical techniques such as mass spectrometry and next-generation sequencing will further enhance the potential of multi-omics studies to provide comprehensive insights into biological systems. As these technologies continue to evolve, their application in personalized medicine, environmental research, and agriculture holds great promise for addressing critical scientific challenges. In conclusion, while simultaneous extraction technologies have made significant strides, several challenges remain in optimizing extraction efficiency, ensuring reproducibility, and reducing costs. Future research should focus on refining extraction protocols, developing innovative extraction reagents, and expanding the scope of these methods to cater to a broader range of biological samples. Ultimately, the continued integration of these advanced techniques will revolutionize the way biological samples are prepared, analyzed, and understood in the context of multi-omics research.

With the rapid development of the biopharmaceutical field, the efficient and simultaneous extraction of multiple biological components from biological samples has become a critical process for advancing scientific research. The ability to simultaneously extract various molecular components such as metabolites, DNA, RNA, and proteins is pivotal for multi-omics studies, which aim to comprehensively understand the molecular mechanisms of biological systems. Traditional methods often extract these components separately, leading to challenges such as sample loss, time consumption, contamination, and inconsistencies across different data types. In contrast, simultaneous extraction techniques address these issues by maintaining the consistency of each biological component’s physiological state, improving data reliability and facilitating integration across omic platforms. This review systematically summarizes recent advances in simultaneous extraction technologies, focusing on methods such as methanol/chloroform extraction, TRIzol reagent extraction, and modified Folch extraction, which have shown significant promise in improving the efficiency and integrity of biological sample preparation. These methods offer various advantages, such as reduced sample volume requirements, decreased contamination risk, and enhanced extraction consistency, which are crucial for studies involving small sample sizes or precious clinical specimens. Among these, methanol/chloroform extraction stands out for its simplicity, low cost, and ability to extract a wide range of biological molecules. However, it does face limitations, such as its inefficiency in extracting lipids and potential RNA contamination. On the other hand, the TRIzol reagent method has become a widely adopted technique due to its ability to simultaneously isolate RNA, proteins, and metabolites from the same sample. Despite its effectiveness, the TRIzol method has limitations in RNA quality, especially when handling complex samples or those with high protein content. Modified Folch extraction, which combines liquid-liquid extraction with commercial kits, offers a highly efficient way to extract polar metabolites, lipids, RNA, DNA, and proteins from small tissue samples. This method has proven advantageous in terms of extraction yield, especially for challenging or rare samples, although it requires precise handling to avoid cross-contamination between phases. The integration of automated platforms, microfluidics, and high-throughput systems is another exciting avenue for improving simultaneous extraction. Automation facilitates large-scale, reproducible sample processing with minimal human error, while microfluidics provides high precision in sample handling and enables real-time monitoring of extraction efficiency. These innovations not only enhance the speed and reproducibility of sample preparation but also open new possibilities for single-cell analysis, where sample volumes are often limited, and extraction efficiency is critical. In addition to the technical aspects, the review also highlights the importance of optimizing extraction protocols for specific sample types, such as clinical tissues, plants, and microorganisms. For example, the challenge of extracting multiple components from cancer tissues, where sample degradation and contamination risks are high, can be mitigated by carefully selecting extraction reagents and minimizing sample handling steps. Similarly, in plant studies, where metabolite diversity is vast, the simultaneous extraction methods must be optimized to account for the unique composition of plant tissues, which often include complex secondary metabolites and cell wall components. Looking forward, the development of more efficient and standardized simultaneous extraction methods will be crucial for advancing multi-omics research. There is a growing need for protocols that can be tailored to specific research needs, ensuring both reproducibility and flexibility in diverse applications. Additionally, combining these extraction methods with high-resolution analytical techniques such as mass spectrometry and next-generation sequencing will further enhance the potential of multi-omics studies to provide comprehensive insights into biological systems. As these technologies continue to evolve, their application in personalized medicine, environmental research, and agriculture holds great promise for addressing critical scientific challenges. In conclusion, while simultaneous extraction technologies have made significant strides, several challenges remain in optimizing extraction efficiency, ensuring reproducibility, and reducing costs. Future research should focus on refining extraction protocols, developing innovative extraction reagents, and expanding the scope of these methods to cater to a broader range of biological samples. Ultimately, the continued integration of these advanced techniques will revolutionize the way biological samples are prepared, analyzed, and understood in the context of multi-omics research.

Objective To gain insights into the biological characteristics of different populations of Culex tritaeniorhynchus within and around the Yellow Sea wetland from the perspective of the occurrence of resistance, we investigated the levels of resistance to deltamethrin and kdr gene mutation in the wetland and its peripheral areas. Methods Specimens were collected from Cx. tritaeniorhynchus populations at two monitoring sites in the Rare Bird National Nature Reserve and Tiaozi Ni Wetland Scenic Area, and also from two populations in Yancheng City and the Liuhe District of Nanjing, and the resistance of these mosquitoes to deltamethrin was determined using the CDC biotest bottle method. For each concentration of deltamethrin assessed, a random subset of exposed specimens was selected for amplification of the kdr gene fragment, followed by Sanger sequencing to identify and analyze resistance-associated mutations. Results The LC50 levels of deltamethrin among mosquitoes from the four populations in Luhe, Yancheng, the Rare Bird National Nature Reserve and the Tiaozi Ni Wetland Scenic Area were 2.048 5, 7.798 2, 3.473 3, and 17.695 5 mg/mL, respectively, with corresponding concentrations of deltamethrin ranging from 0.005 to 5.000,0.050 to 50.000,0.050 to 25.000 and 0.050 to 50.000 mg/mL, respectively. Furthermore, the ranges of the KT50 values were 11.76-107.43, 67.05-216.30,29.77-107.43 and 28.40-329.51 min; the 1-h knockdown rates were 34.58%-99.15%, 9.52%-43.80%, 55.09%-73.01%, and 10.09%-68.07%; and the 24-h mortality rates were 12.15%-67.52%,9.52%-79.56%,13.17%-82.21%, and 11.01%-78.99%, respectively. With respect to kdr gene mutation, we assayed a total of 63,70,59, and 57 mosquitoes for the four populations, for which we detected L1014F mutation frequencies of 14.29%, 35.00%, 20.34%, and 31.58%, respectively, with a majority of these mutations being heterozygous for resistance. In addition, five adult mosquitoes were identified has having synonymous mutations at site 1011[i. e. , AAT(asparagine)mutation to AAC(asparagine)]. Conclusions Our findings revealed the clear resistance of Cx. tritaeniorhynchus to deltamethrin in the Yancheng region of the Yellow Sea wetland, and the resistance phenotype and kdr frequency of Cx. tritaeniorhynchus in the wetland environment were comparable to those of Cx. tritaeniorhynchus in the wetland environment, thereby indicating that the resistance of different populations of Cx. tritaeniorhynchus was homogeneous under the pressure of different insecticide selection within and around the wetland. However, the underlying mechanisms need to be further studied.

Objective To investigate the species composition, distribution, density, and pathogen-carrying status of host-seeking ticks in urban environments of Jiangsu Province, and to provide a scientific basis for the prevention and control of tick-borne diseases in urban settings. Methods From April to September 2023, a survey on host-seeking ticks was conducted in three types of habitats (city parks, residential areas, and street greenbelts) across 54 counties (cities, districts) of 13 prefecture-level cities in Jiangsu Province by using the flagging method. RStudio 4.4.3 (Windows version) was employed to perform chi-square test analysis on the species composition of ticks across different months, and Friedman test (for multiple paired samples) was applied to analyze monthly changes in the average tick density index among different habitats. Quantitative real-time PCR was performed to detect pathogens in the captured ticks. Results A total of 863 host-seeking ticks were captured from 54 habitats in 24 counties (cities, districts) of 11 prefecture-level cities (Nanjing, Wuxi, Changzhou, Suzhou, Nantong, Huai'an, Yancheng, Yangzhou, Zhenjiang, Taizhou, and Suqian) in Jiangsu Province, whereas no ticks were captured in Xuzhou and Lianyungang. The collected ticks belonged to three species, with Haemaphysalis longicornis being the dominant species (accounting for 82.62%), followed by Haemaphysalis flava and Hae. phasiana. The average density index of ticks in positive habitats was 3.20 ticks/ (flag·100 m). In terms of tick density among prefecture-level cities, Wuxi had the highest density[13.55 ticks/(flag·100 m)], whereas Nanjing and Taizhou had the lowest[both,0.20 ticks/(flag·100 m)]. With respect to the types of positive habitats,46 positive city parks,7 positive residential areas, and 1 positive street greenbelt were found, with the average tick density index being 3.46, 1.86, and 3.60 ticks/flag · 100 m, respectively. No statistically significant differences were observed in the monthly variations in the average tick density index among different habitats (P＞0.05). Pathogen detection showed no Bandavirus dabieense, Rickettsia, or Borrelia burgdorferi in the collected ticks. Conclusions Host-seeking ticks have established populations in urban environments across most prefecture-level cities in Jiangsu Province, with Hae. longicornis identified as the dominant species. City parks serve as the primary breeding habitats for these ticks. Strengthening tick surveillance and control measures in densely populated and frequently visited areas, such as city parks and residential neighborhoods, is crucial for the effective prevention and control of urban tick-borne diseases.

Monoamine neurotransmitters mainly include serotonin,dopamine,epinephrine,and norepinephrine.They play an indispensable regulatory role in key physiological activities such as emotion,sleep,and memory within the central nervous system.Precise detection of these neurotransmitters holds great significance in the field of neuroscience research.Detection methods for monoamine neurotransmitters encompass high-performance liquid chromatography,mass spectrometry,capillary electrophoresis,fluorescence spectroscopy,and electrochemical methods,etc.Compared with other methods,electrochemical methods offer advantages such as high sensitivity,good selectivity,low cost,strong portability,convenient operation,and capability for in vivo real-time detection.This article reviewed recent research progress in electrochemical detection of monoamine neurotransmitters,focusing on a retrospective and summary from three aspects:sensor electrode materials,detection of various monoamine neurotransmitters,and in vivo real-time analysis.Furthermore,the future development of electrochemical sensors for monoamine neurotransmitters was prospected.

Forensic medicine has been designated as a first-level discipline,presenting new opportunities and challenges for the development of forensic medicine.Since the 1980s,the establishment of foren-sic medicine discipline and the cultivation of high-level forensic talents have become hot topics in the development of forensic medicine in China.Since the 13th Five-Year Plan,the forensic team of Shanxi Medical University has been aiming at the forefront,proposing the development goals of"Five First-class"and the discipline development path"Six Major Achievements".It has selected benchmark disci-plines,identified gaps in disciplinary development,unified thoughts,formulated completion timelines,concentrated superior resources,assigned tasks to individuals,and created an"Organized Fill-in-the-Blank Format"forensic medicine discipline construction model with the characteristics of the new era.The construction model of forensic medicine has achieved good results in the goals,discipline frame-work,scientific research,talent cultivation,discipline team and platform construction,forming a rela-tively complete discipline construction and management system,and accumulating valuable experience for the construction of first-level discipline and high-level talent cultivation of forensic medicine.

Doxorubicin is a commonly used antitumor drug for the treatment of various cancers.How-ever,its clinical application is greatly restricted by its severe cardiotoxicity.At present,doxorubicin-induced cardiotoxicity is categorized into acute and chronic forms,depending on the dosage and dura-tion of exposure,which may eventually lead to the occurrence of heart failure.The pathogenesis of doxorubicin cardiotoxicity is associated with oxidative stress,mitochondrial damage,calcium overload,dysregulation of autophagy,and apoptosis.In forensic medical practice,cases of poisoning or even car-diac death caused by doxorubicin showed no obvious changes in cardiac morphology through routine forensic pathological examinations.The paper aims to summarize the research on the mechanisms of action of doxorubicin-induced cardiotoxicity in recent years,analyze and discuss the possible pathways of cardiomyocyte injury caused by doxorubicin,and provide references for research on the mechanisms of doxorubicin-induced cardiotoxicity and forensic application.

Caenorhabditis elegans,as an emerging model organism,has been widely used in multiple disciplines such as medicine,life science,and environmental science in recent years,due to its charac-teristics of short life cycle,clear genetic background,highly conserved evolution,complete genome analysis and excellent fitting between experimental data and human results.It also shows unique advan-tages in the field of toxicology.This paper summarizes its advantages in toxicological research starting from the biological characteristics of C.elegans,introduces the toxicological research methods and progress based on the C.elegans model,focuses on demonstrating its applications in environmental fo-rensic medicine and forensic toxicology,and looks forward to the application of the relevant results in the field of forensic science.

Objectives:To evaluate the predictive value of Tabular Prior-data Fitted Network(TabPFN) for short-term outcome in patients with spontaneous intracerebral hemorrhage (sICH), and compared with the Extreme Gradient Boosting (XGboost) model and traditional logistic regression (LR) model. Methods:Patients with sICH admitted to the Department of Neurology, Hefei Second People's Hospital from January 2018 to March 2024 were included retrospectively. The demographic and baseline data were collected. At 3 months after onset, the modified Rankin Scale score was used to determine the outcome, 0-2 was defined as good outcome and >2 was defined as poor outcome. All enrolled patients were randomly divided into a training set and a testing set at a ratio of 7:3. Feature selection was performed using recursive feature elimination (RFE) method, and then the selected feature variables were included into TabPFN, XGboost, and LR models for training and testing. The area under the curve (AUC) of receiver operating characteristic (ROC) curve was used to evaluate the predictive ability of the models. Shapley additive explanations (SHAP) method was used for model interpretation.Results:A total of 547 patients with sICH were enrolled, including 367 males (67.1%), with a median age of 65 (interquartile range, 54-76) years. Two hundred twenty-six patients (41.3%) had poor outcome. Age, baseline blood pressure (systolic blood pressure, diastolic blood pressure), baseline laboratory tests (white blood cell count, red blood cell count, platelet count, neutrophil count, hemoglobin, fasting blood glucose, creatinine, uric acid, urea nitrogen, alanine aminotransferase, aspartate aminotransferase), hematoma rupture into the ventricle, island sign, baseline hematoma volume, and baseline National Institutes of Health Stroke Scale (NIHSS) score were selected as characteristic variables using RFE method. ROC curve analysis showed that the ROC AUC for TabPFN, Xgboost, and LR models predicting poor short-term outcome in the testing set were 0.918 (95% confidence interval [ CI] 0.870-0.966], 0.883 (95% CI 0.826-0.940), and 0.905 (95% CI 0.854-0.957), respectively. SHAP analysis showed that the top four important variables in the TabPFN model were baseline NIHSS score, baseline hematoma volume, baseline aspartate aminotransferase, and age. Conclusions:The TabPFN model is superior to the LR model and the XGBoost model in predicting poor outcome in patients with sICH. In the TabPFN model, baseline NIHSS score, baseline hematoma volume, aspartate aminotransferase, and age are the most important predictors of poor outcome in patients with sICH.Objectives To evaluate the predictive value of Tabular Prior-data Fitted Network(TabPFN) for short-term outcome in patients with spontaneous intracerebral hemorrhage (sICH), and compared with the Extreme Gradient Boosting (XGboost) model and traditional logistic regression (LR) model. Methods Patients with sICH admitted to the Department of Neurology, Hefei Second People's Hospital from January 2018 to March 2024 were included retrospectively. The demographic and baseline data were collected. At 3 months after onset, the modified Rankin Scale score was used to determine the outcome, 0-2 was defined as good outcome and >2 was defined as poor outcome. All enrolled patients were randomly divided into a training set and a testing set at a ratio of 7:3. Feature selection was performed using recursive feature elimination (RFE) method, and then the selected feature variables were included into TabPFN, XGboost, and LR models for training and testing. The area under the curve (AUC) of receiver operating characteristic (ROC) curve was used to evaluate the predictive ability of the models. Shapley additive explanations (SHAP) method was used for model interpretation. Results A total of 547 patients with sICH were enrolled, including 367 males (67.1%), with a median age of 65 (interquartile range, 54-76) years. Two hundred twenty-six patients (41.3%) had poor outcome. Age, baseline blood pressure (systolic blood pressure, diastolic blood pressure), baseline laboratory tests (white blood cell count, red blood cell count, platelet count, neutrophil count, hemoglobin, fasting blood glucose, creatinine, uric acid, urea nitrogen, alanine aminotransferase, aspartate aminotransferase), hematoma rupture into the ventricle, island sign, baseline hematoma volume, and baseline National Institutes of Health Stroke Scale (NIHSS) score were selected as characteristic variables using RFE method. ROC curve analysis showed that the ROC AUC for TabPFN, Xgboost, and LR models predicting poor short-term outcome in the testing set were 0.918 (95% confidence interval [ CI] 0.870-0.966], 0.883 (95% CI 0.826-0.940), and 0.905 (95% CI 0.854-0.957), respectively. SHAP analysis showed that the top four important variables in the TabPFN model were baseline NIHSS score, baseline hematoma volume, baseline aspartate aminotransferase, and age. Conclusions The TabPFN model is superior to the LR model and the XGBoost model in predicting poor outcome in patients with sICH. In the TabPFN model, baseline NIHSS score, baseline hematoma volume, aspartate aminotransferase, and age are the most important predictors of poor outcome in patients with sICH.

Objective To explore the risk factors for noncontiguous spinal fractures(NSFs)in the elderly.Methods The clinical data of 614 elderly patients with spinal fracture from January 2013 to December 2019 were analyzed retrospectively.Patients were divided into the NSFs group and the Non-NSFs group according to whether NSFs occurred or not.Univariate analysis and multivariate Logistic regression analysis were used to screen the risk factors of NSFs.Results Univariate analysis showed that female(P=0.003),high-energy violent injury(P=0.032),osteoporosis(P=0.004),fracture in spring(P=0.020),and previous spinal fracture history(P<0.001)were associated with the occurrence of NSFs.Multivariate Logistic regression analysis showed that fracture in spring(P=0.024),previous spinal fracture history(P<0.001)and high-energy violent injury(P=0.038)were the independent risk factors for the occurrence of NSFs in the elderly.Conclusion High-energy violent injury,fracture in spring and previous spinal fracture history are the independent risk factors for the occurrence of NSFs in the elderly.Therefore,elderly patients with the above risk factors should be examined more carefully and comprehensively to avoid missed diagnosis and delayed diagnosis.In order to reduce the incidence of this disease,corresponding measures should be taken according to the preventable risk factors.