Background Platelet parameters are important indicators of cardiovascular risk, and environmental pollutants such as polychlorinated biphenyls (PCBs) may impair platelet function through oxidative stress. Objective To investigate the differential effects of single and mixed exposure to PCBs on platelet parameters among individuals with normal glucose tolerance (NGT), impaired fasting glucose (IFG), and type 2 diabetes mellitus (T2DM), and to evaluate the potential modifying role of a healthy lifestyle. Methods This study included 2249 participants (including 707 with NGT, 759 with IFG, and 783 with T2DM). Plasma PCB concentrations were measured using triple quadrupole gaschromatography-tandem mass spectrometry. Generalized linear regression was used to assess the associations between individual PCB congeners and platelet parameters. Quantile g-computation (QGC) and Bayesian kernel machine regression (BKMR) models were used to evaluate the overall effects of PCBs mixture exposure on platelet parameters across different glycemic states, as well as its interaction with healthy lifestyle score (HLS). Results Generalized linear regression analyses showed significant differences in the effects of PCBs on platelet parameters across different glycemic states (P<0.05). After adjusting for confounders, PCBs mixture exposure was significantly associated with lower platelet counts (PLT) in individuals with NGT (b=−10.60, 95%CI: −16.48, −4.71) and IFG (b=−12.91, 95%CI: −18.90, −6.92), whereas no significant association was observed in individuals with T2DM (P=0.051). Mean platelet volume (MPV) and platelet-large cell ratio (P-LCR) increased significantly with higher PCBs exposure levels across all three groups (P<0.05). BKMR analysis showed a positive association between PCBs mixture exposure and P-LCR, with the strongest association observed in the NGT group. Furthermore, a significant interaction was observed between HLS and PCBs mixture exposure, and a higher HLS attenuated the effects of PCBs on P-LCR. Conclusion Glycemic glycemic states may modify the effects of PCBs on platelets. Individuals with NGT appear more sensitive to PCBs exposure, whereas the T2DM state may attenuate this effect. Moreover, healthy lifestyles, including not smoking, moderate alcohol consumption, maintaining moderate-to-high physical activity, a healthy diet, and an appropriate body mass index (BMI), may mitigate the adverse effects of most PCBs on platelet parameters.

Background Platelet parameters are important indicators of cardiovascular risk, and environmental pollutants such as polychlorinated biphenyls (PCBs) may impair platelet function through oxidative stress. Objective To investigate the differential effects of single and mixed exposure to PCBs on platelet parameters among individuals with normal glucose tolerance (NGT), impaired fasting glucose (IFG), and type 2 diabetes mellitus (T2DM), and to evaluate the potential modifying role of a healthy lifestyle. Methods This study included 2249 participants (including 707 with NGT, 759 with IFG, and 783 with T2DM). Plasma PCB concentrations were measured using triple quadrupole gaschromatography-tandem mass spectrometry. Generalized linear regression was used to assess the associations between individual PCB congeners and platelet parameters. Quantile g-computation (QGC) and Bayesian kernel machine regression (BKMR) models were used to evaluate the overall effects of PCBs mixture exposure on platelet parameters across different glycemic states, as well as its interaction with healthy lifestyle score (HLS). Results Generalized linear regression analyses showed significant differences in the effects of PCBs on platelet parameters across different glycemic states (P<0.05). After adjusting for confounders, PCBs mixture exposure was significantly associated with lower platelet counts (PLT) in individuals with NGT (b=−10.60, 95%CI: −16.48, −4.71) and IFG (b=−12.91, 95%CI: −18.90, −6.92), whereas no significant association was observed in individuals with T2DM (P=0.051). Mean platelet volume (MPV) and platelet-large cell ratio (P-LCR) increased significantly with higher PCBs exposure levels across all three groups (P<0.05). BKMR analysis showed a positive association between PCBs mixture exposure and P-LCR, with the strongest association observed in the NGT group. Furthermore, a significant interaction was observed between HLS and PCBs mixture exposure, and a higher HLS attenuated the effects of PCBs on P-LCR. Conclusion Glycemic glycemic states may modify the effects of PCBs on platelets. Individuals with NGT appear more sensitive to PCBs exposure, whereas the T2DM state may attenuate this effect. Moreover, healthy lifestyles, including not smoking, moderate alcohol consumption, maintaining moderate-to-high physical activity, a healthy diet, and an appropriate body mass index (BMI), may mitigate the adverse effects of most PCBs on platelet parameters.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

The Healthy China 2030 Plan set the goal of reducing premature deaths from diabetes by 30% by 2030. However, there has been a lack of assessment of premature mortality for diabetes since the action plan was issued. This study used data from the Global Burden of Disease Study 2021, calculated the premature deaths for diabetes by sex, provinces, and subtypes from 1990 to 2021. We explored the temporal trend of premature mortality using the average annual percent change (AAPC) for different sexes, provinces, and subtypes from 1990 to 2021. Furthermore, we predicted premature mortality for diabetes through 2030 for China and its provinces according to the average annual change rate from 2010 to 2021. There was a first slow upward trend in premature mortality for diabetes from 0.5% in 1990 to 0.6% in 2004, and then a decline until 2021 with premature mortality of 0.4%. By 2030, only Fujian (30.3%) will achieve the desired level of reduction, with only seven provinces meeting the target for females and none for males. There is a large range in the degree of decline between inland and coastal regions, showing obvious geographic differences, and there should be a focus on balancing medical resources.
Humans ; China/epidemiology* ; Female ; Male ; Mortality, Premature/trends* ; Diabetes Mellitus/mortality* ; Goals ; Middle Aged ; Adult

In orthodontic treatment for protrusion,premolar extraction is a common option.The extraction spaces are closed by the re-ciprocal movement of posterior and anterior teeth.However,the unclear question is,after extracting the first or second premolars in the maxilla or mandible,what amount is the"anchorage loss"(mesial movement)of the molars when the spaces closed using intra-arch re-ciprocal anchorage only.We reviewed a large number of clinical studies on orthodontic treatment involving the extraction of premolars to investigate the factors related to molar anchorage loss.Existing studies have explored the influence of physiological factors such as age,occlusal relationship,and vertical facial profile,as well as treatment factors such as tooth extraction site,appliance system,and gap closure method on the molar anchorage loss in orthodontic cases involving the extraction of premolars.The reported molar anchorage loss under different conditions has certain reference value for the orthodontic extraction plan making and anchorage design.More high-quality clinical studies are needed to further clarify this important clinical issue in the future.

Objective:To explore the correlation between renal function and abdominal aortic hemodynamic parameters based on four-dimensional flow(4D Flow) MRI in patients with chronic kidney disease (CKD).Methods:A cross-section prospective study was conducted on 73 patients diagnosed with CKD at First People′s Hospital of Changzhou between March 2021 and May 2023, as well as 13 volunteers without kidney injury. According to the estimated glomerular filtration rate (eGFR), the subjects were divided into CKD 1-3 stage group ( n=34), CKD 4-5 stage group ( n=39), and control group ( n=13). All subjects underwent 4D Flow MRI examination of the abdominal aorta, measuring pulse wave velocity (PWV), peak velocity, and maximum wall shear stress (WSS) at the proximal plane (Plane_1) and the higher renal artery opening plane (Plane_2) of the abdominal aorta. The differences in 4D Flow MRI hemodynamic parameters among the three groups were compared using a one-way analysis of variance or the Kruskal-Wallis test. The correlation between 4D Flow MRI hemodynamic parameters and eGFR was analyzed by using the Spearman correlation coefficient. The independent influencing factors that affect eGFR were analyzed by using multivariate linear regression analysis. Results:There were significant differences in abdominal aortic PWV and maximal WSS of Plane_1 and Plane_2 among the three groups ( H=10.38, P=0.006; F=11.16, P<0.001; F=4.75, P=0.011). There were no significant differences in the peak velocity of Plane_1 and Plane_2 among the three groups (both P>0.05). Abdominal aortic PWV was negatively correlated with eGFR ( r s=-0.30, P=0.005). There was a positive correlation between the maximal WSS of Plane_1 and Plane_2 with eGFR ( r s=0.39, P<0.001; r s=0.29, P=0.006). Abdominal aortic PWV and maximal WSS of Plane_1 were independent influencing factors of eGFR (b=-4.32, P=0.018; b=132.23, P=0.004). Conclusions:There is an independent correlation between renal function and abdominal aortic hemodynamic parameters based on 4D Flow MRI in patients with CKD, and abdominal aortic PWV and maximal WSS of Plane_1 were independent influencing factors of eGFR.