Flap transplantation is a critical surgical strategy for the reconstruction of tissue defects caused by trauma, tumor resection, and congenital malformations, and its survival rate directly determines surgical efficacy and patient prognosis. Following transplantation, flaps inevitably undergo ischemia-reperfusion (I/R) injury, during which oxidative stress, inflammatory responses, and metabolic disturbances are intricately intertwined, ultimately leading to cellular injury and tissue necrosis. Recent studies have demonstrated that multiple forms of programmed cell death—including apoptosis, pyroptosis, ferroptosis, necroptosis, and PANoptosis—play central roles in flap I/R injury. The extensive crosstalk and molecular interactions among these pathways form a highly complex cell death network. Specifically, apoptosis is mediated by the imbalance of Bcl-2 family proteins and the activation of cysteine-dependent aspartate-specific protease (caspase) cascades; pyroptosis is driven by the NLRP3-caspase-1-GSDMD axis, resulting in membrane pore formation and the release of pro-inflammatory cytokines; ferroptosis is characterized by iron-dependent lipid peroxidation and dysfunction of glutathione peroxidase 4 (GPX4); necroptosis is triggered by the receptor-interacting serine/threonine-protein kinase 1 (RIPK1)-RIPK3-MLKL signaling complex, leading to membrane rupture; and PANoptosis represents an integrated form of inflammatory cell death that coordinates multiple death pathways. Importantly, these forms of programmed cell death are not independent but are interconnected through extensive signaling crosstalk. Key regulatory molecules, including caspase-8, reactive oxygen species (ROS), nuclear factor-κB (NF-κB), and nuclear factor erythroid 2-related factor 2 (Nrf2), collectively modulate the dynamic balance among these pathways. Therefore, the multidimensional interplay and spatiotemporal dynamics of programmed cell death constitute a fundamental pathological basis of flap I/R injury. This review systematically summarizes the latest advances in the mechanisms and interactions of various programmed cell death pathways in flap I/R injury, aiming to elucidate the underlying regulatory network. These insights may provide novel theoretical foundations for optimizing flap protection strategies, improving flap survival, and promoting tissue repair.

ObjectiveTo observe the clinical effectiveness and safety of Xiaozhong Zhitong Mixture （消肿止痛合剂） combined with antibiotic bone cement in the treatment of diabetic foot ulcer （DFU） with damp-heat obstructing syndrome. MethodsA total of 72 DFU patients with damp-heat obstructing syndrome were randomly assigned to treatment group （36 cases） and the control group （36 cases）. Both groups received standard treatment and topical antibiotic bone cement for ulcer wounds， while the treatment group received oral Xiaozhong Zhitong Mixture （50 ml per time， three times daily） in additionally. Both groups underwent daily wound dressing changes for 21 consecutive days. Ulcer healing rate， serum levels of tumor necrosis factor-alpha （TNF-α）， interleukin-1 beta （IL-1β）， malondialdehyde （MDA）， superoxide dismutase （SOD）， C-reactive protein （CRP）， and white blood cell （WBC） count were observed before and after treatment， and visual analog scale （VAS） scores for wound pain， traditional Chinese medicine （TCM） syndrome scores， and the DFU Healing Scale （DMIST scale） were also compared. Liver and kidney function were evaluated before and after treatment， and adverse events such as allergic reactions， worsening ulcer pain were recorded. ResultsTotally 35 patients in the treatment group and 33 in the control group were included in the final analysis. The ulcer healing rate in the treatment group was （87.93±9.34）%， significantly higher than （81.82±12.02）% in the control group （P = 0.035）. Compared to pre-treatment levels， both groups showed significant reductions in serum CRP， WBC， MDA， IL-1β， and TNF-α levels， with an increase in SOD level （P＜0.05）. TCM syndrome scores， VAS， and DMIST scores also significantly decreased in both groups （P＜0.05）， with greater improvements in the treatment group （P＜0.05）. No significant adverse reactions were observed in either group during treatment. ConclusionXiaozhong Zhitong Mixture combined with antibiotic bone cement has significant advantages in promoting DFU healing， reducing inflammatory response， and alleviating oxidative stress in DFU patients with damp-heat obstructing syndrome， with good safety for DFU patients with damp-heat obstructing syndrome.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

The left maxilla of a patient was resected because of tumor,and the defect was reconstruted with fibular transplantation.The autonomous dental implant robot technology was used to achieve precise implantation of multiple implants and immediate denture restoration within the limited left maxilla.The surgery was minimally invasive and efficient,and significantly reducing patient post-operative discomfort.The final restoration was completed 6 months after surgery.

BACKGROUND:Wolff's law points out that the lack of mechanical stress in the body will lead to the degradation of the microstructure of bone tissue,mass loss,and metabolic disorders,and eventually lead to osteoporosis,which suggests that mechanical stress plays an important role in the growth,reconstruction,and formation of bone tissue.At present,the relevant studies concerning mechanical stress on osteoblasts mainly focus on fluid shear force,but it is difficult to intervene in vivo.Meanwhile,some studies have found that compressive stress can also play a similar role in fluid shear force to a certain extent.Exploring the mode of action and influence of compressive stress on cells in vitro experiments can enrich the interaction relationship between mechanical stress and cells.It helps provide a theoretical basis for studies of metabolic bone diseases,including osteoporosis,and other diseases.OBJECTIVE:To review in vitro experiments,the application of compressive stress to cells,different biological behaviors caused by cells,the possible signaling pathways,and possible future applications.METHODS:We searched PubMed,Web of Science,CNKI,and WanFang databases from January 2000 to March 2024 to include all articles related to compressive stress on cells,including basic research and microscopic mechanism studies,using search terms"compressive stress,mechanical stress,hydrostatic pressure,cell"in Chinese and English.Finally,the 63 included articles were reviewed.RESULTS AND CONCLUSION:(1)There are various ways to apply compressive stress,and different experimental equipment has different ways of pressurizing cells,so it is necessary to further standardize the experimental equipment,standardize the pressurization unit,reduce the confounding factors,and make the reference and comparability between different experimental groups.(2)Compressive stress can cause changes in cell proliferation,differentiation,autophagy,apoptosis,migration,etc.,and the effect of compressive stress is time-or dose-dependent in most cases.(3)At present,most in vitro experimental studies have shown that compressive stress may mainly act on osteoblasts through MAPK signaling pathway and Wnt/β-catenin signaling pathway,causing osteoblasts to produce different responses.(4)The effect of compressive stress on different cells is not the same,and its possible biological effects need to be studied.(5)Further research on compressive stress is helpful to provide a theoretical basis for treatment in orthopedics,stomatology,tumors and other fields,and gentle disinfection using hydrostatic pressure is a promising disinfection method.

Objective To investigate the correlation between skeletal muscle fat content and diabetic peripheral neuropathy(DPN)in patients with type 2 diabetes mellitus(T2DM).Methods 290 patients with T2DM admitted to our hospital were enrolled in this study from January 2023 to February 2024 and divided into two groups according to whether they were complicated with DPN:simple T2DM group(T2DM,n=98)and T2DM with DPN group(DPN,n=192).The general data,biochemical indexes and fat distribution indexes measured based on quantitative CT were compared between the two groups.Spearman correlation was used to analyze the relationship between fat distribution indexes and DPN,logistic regression analysis of influencing factors of T2DM complicated with DPN.Results Age,DM duration,WHR,FIns,insulin resistance index(HOMA-IR)and FF were higher in DPN group than in T2DM group(P<0.05).Ca,subcutaneous abdominal fat area(SFA)and liver fat content were lower in DPN group than in T2DM group(P<0.05).Spearman correlation analysis showed that DPN was negatively correlated with SFA and liver fat content(r=-0.127,-0.123,P<0.05),and positively correlated with FF(r=0.117,P<0.05).Logistic regression analysis showed that without adjusting for confounding factors and adjusting for DM duration,WHR,HOMA-IR,Ca,SFA and liver fat content,FF was an influential factor for DPN in T2DM patients.Conclusions Skeletal muscle FF was associated with DPN in patients with T2DM.