In recent years, exosomes had been recognized as a potential cell-free therapeutic tool in the field of regenerative medicine due to their easy accessibility, low immunogenicity, and good therapeutic effect. As paracrine products of cells, exosomes not only have the functions of their donor cells but also involve fewer ethical disputes. They are more stable than traditional stem cell therapy, and easy to store, transport and sterilize, which are gradually applied in the field of oral regenerative medicine. This article provides a review of the general properties of exosomes and their application in the field of oral regeneration, with a view to exploring new pathways for functional regeneration of the stomatognathic system.

Objective:To explore the potential of integrating virtual surgery with three-dimensional (3D) printed guides in the surgical management of mandibular benign tumors and subsequent reconstruction of bone defects.Methods:A retrospective analysis was conducted on the clinical data of patients who underwent computer-assisted resection and vascularized fibular flap reconstruction for benign mandibular tumors at the Department of Oral and Maxillofacial Surgery, First Affiliated Hospital of Zhengzhou University, from June 2013 to December 2020. According to the utilization of guide plates for mandibular and fibular osteotomy during surgical procedures or not, the patients were categorized into two cohorts: a guide plate cohort and a non-guide plate cohort. In the guide plate group, custom-designed gudie plates based on virtual surgical plans were fabricated using 3D printing technology and employed intraoperatively; In the non-guide plate group, surgery was exclusively performed based on virtual surgical plan and prebent titanium plate without any supplementary plating. The measured outcomes included fibular flap osteotomy, operation duration, and clinical flap survival. Computed tomography images obtained one week post-surgery were utilized to assess the intersegmental commissure degree between fibular segments as well as between fibular segments and mandible, commissure degree between fibular segments and prebent titanium plate, and condyle position. The satisfaction of patients with their facial appearance was evaluated 6 months after the surgery using a visual analogue scale. Statistical analysis was conducted using SPSS 21.0 software. Independent sample t-tests was utilized to compare the duration of operation and and postoperative evaluation of facial appearance, the Chi-square tests was utilized for condyle position, commissure degrees among interactions involving fibular segments, prebent titanium plates, bone segments( P<0.05 denoted statistical significance). Results:A total of 30 patients were enrolled, comprising 17 males and 13 females, with a median age of 24 years (16-64 years). The preparation process of fibular flaps proceeded smoothly. The required length of fibula was measured as (14.1 ± 1.9) cm (5.7-18.1 cm), while the number of fibular segments ranged from 2 to 4, averaging at approximately 2.9 ± 0.6. The mandibular defects were repaired using a single-layer fibula in 12 cases, a vascularized folded fibula in 7 cases and a combination of vascularized and non-vascularized fibula in 11 cases. The operation time for the guide plate group was recorded as ( 335.9 ± 64.0) min (240-433 min), while it was observed to be (470.7 ± 140.5 ) min (280-680 min) for the non-guide plate group.The postoperative follow-up duration ranged from 9 to 23 months, with an average period of 11 months. All fibular flaps demonstrated clinical survival. The number of patients with good commissure degree between fibular and mandibular segments, between prebent titanium plate and fibular and mandibular segments and the position of condyle were 15, 15 and 13 cases in guide plate group, 10, 13 and 11 cases in non-guide plate group respectively. The statistical analysis revealed a significant difference ( P<0.05) in the degree of commissure between the fibular and the mandibular segments (15/15 vs. 10/15) in the two groups. Both groups exhibited high levels of satisfaction regarding their postoperative facial appearance at the 6 months follow-up, observed to be 9.6±0.5 and 9.3±0.5 respectively, and the statisticla analysis revealed non-significant difference ( P>0.05). Conclusion:The integration of virtual surgery with 3D printed guide plates can effectively reduce operative time and improve precision in the repair and reconstruction of free-fibular flaps following resection of benign tumors of the mandible.

Objective:To explore the potential of integrating virtual surgery with three-dimensional (3D) printed guides in the surgical management of mandibular benign tumors and subsequent reconstruction of bone defects.Methods:A retrospective analysis was conducted on the clinical data of patients who underwent computer-assisted resection and vascularized fibular flap reconstruction for benign mandibular tumors at the Department of Oral and Maxillofacial Surgery, First Affiliated Hospital of Zhengzhou University, from June 2013 to December 2020. According to the utilization of guide plates for mandibular and fibular osteotomy during surgical procedures or not, the patients were categorized into two cohorts: a guide plate cohort and a non-guide plate cohort. In the guide plate group, custom-designed gudie plates based on virtual surgical plans were fabricated using 3D printing technology and employed intraoperatively; In the non-guide plate group, surgery was exclusively performed based on virtual surgical plan and prebent titanium plate without any supplementary plating. The measured outcomes included fibular flap osteotomy, operation duration, and clinical flap survival. Computed tomography images obtained one week post-surgery were utilized to assess the intersegmental commissure degree between fibular segments as well as between fibular segments and mandible, commissure degree between fibular segments and prebent titanium plate, and condyle position. The satisfaction of patients with their facial appearance was evaluated 6 months after the surgery using a visual analogue scale. Statistical analysis was conducted using SPSS 21.0 software. Independent sample t-tests was utilized to compare the duration of operation and and postoperative evaluation of facial appearance, the Chi-square tests was utilized for condyle position, commissure degrees among interactions involving fibular segments, prebent titanium plates, bone segments( P<0.05 denoted statistical significance). Results:A total of 30 patients were enrolled, comprising 17 males and 13 females, with a median age of 24 years (16-64 years). The preparation process of fibular flaps proceeded smoothly. The required length of fibula was measured as (14.1 ± 1.9) cm (5.7-18.1 cm), while the number of fibular segments ranged from 2 to 4, averaging at approximately 2.9 ± 0.6. The mandibular defects were repaired using a single-layer fibula in 12 cases, a vascularized folded fibula in 7 cases and a combination of vascularized and non-vascularized fibula in 11 cases. The operation time for the guide plate group was recorded as ( 335.9 ± 64.0) min (240-433 min), while it was observed to be (470.7 ± 140.5 ) min (280-680 min) for the non-guide plate group.The postoperative follow-up duration ranged from 9 to 23 months, with an average period of 11 months. All fibular flaps demonstrated clinical survival. The number of patients with good commissure degree between fibular and mandibular segments, between prebent titanium plate and fibular and mandibular segments and the position of condyle were 15, 15 and 13 cases in guide plate group, 10, 13 and 11 cases in non-guide plate group respectively. The statistical analysis revealed a significant difference ( P<0.05) in the degree of commissure between the fibular and the mandibular segments (15/15 vs. 10/15) in the two groups. Both groups exhibited high levels of satisfaction regarding their postoperative facial appearance at the 6 months follow-up, observed to be 9.6±0.5 and 9.3±0.5 respectively, and the statisticla analysis revealed non-significant difference ( P>0.05). Conclusion:The integration of virtual surgery with 3D printed guide plates can effectively reduce operative time and improve precision in the repair and reconstruction of free-fibular flaps following resection of benign tumors of the mandible.

Unlike chemosynthetic drugs designed for specific molecular and disease targets,active small-molecule natural products typically have a wide range of bioactivities and multiple targets,necessitating extensive screening and development.To address this issue,we propose a strategy for the direct in situ micro-dynamic examination of potential drug candidates to rapidly identify their effects and mechanisms of action.As a proof-of-concept,we investigated the behavior of mussel oligosaccharide(MOS-1)by tracking the subcellular dynamics of fluorescently labeled MOS-1 in cultured cells.We recorded the entire dynamic process of the localization of fluorescein isothiocyanate(FITC)-MOS-1 to the lysosomes and visualized the distribution of the drug within the cell.Remarkably,lysosomes containing FITC-MOS-1 actively recruited lipid droplets,leading to fusion events and increased cellular lipid consumption.These drug behaviors confirmed MOS-1 is a candidate for the treatment of lipid-related diseases.Furthermore,in a high-fat HepG2 cell model and in high-fat diet-fed apolipoprotein E(ApoE)-/-mice,MOS-1 significantly promoted triglyceride degradation,reduced lipid droplet accumulation,lowered serum triglyceride levels,and mitigated liver damage and steatosis.Overall,our work supports the prioritization of in situ visual monitoring of drug location and distribution in subcellular compartments during the drug development phase,as this methodology contributes to the rapid identification of drug indications.Collectively,this methodology is significant for the screening and development of selective small-molecule drugs,and is expected to expedite the identification of candidate molecules with me-dicinal effects.

Objective:To investigate the effect of interfering S-phase kinase associated protein 1 (SKP1) gene on apoptosis in Parkinson's disease(PD) cell model induced by 1-methyl-4-phenyl-pyridine ion (MPP+ ) and the mechanism of ubiquitin proteasome system degradation of α-synuclein (α-syn) influence.Methods:SH-SY5Y cells were divided into control group, MPP+ group, SKP1 interference group, and SKP1 interference+ MG132(UPS inhibitor) group.The cells in the control group were cultured normally. The cells in the latter three groups were incubated with MPP+ (0.5 mmol/L) for 24 h as PD model cells.The cells in SKP1 interference group were transfected with lentivirus SKP1-siRNA, and the cells in SKP1 interference+ MG132 group were transfected with lentivirus SKP1 siRNA and added with MG132 (0.5 μmol/L) for 24 h. The protein levels and mRNA levels of SKP1, microtubule-associated protein light chain 3 (LC3), lysosome-associated membrane protein (LAMP), α-syn, ubiquitin activating enzyme E1 (UBE1), parkin, and p27 in cells were detected by Western blot and RT-PCR.Flow cytometry was used to detect cell apoptosis and cycle level, and CCK-8 method was used to detect cell proliferation level.Co-immunoprecipitation method was used to explore the interaction between SKP1 and p27. SPSS 23.0 software was used for statistical analysis. One-way ANOVA was used for comparison among groups, and LSD test was used for further pairwise comparison.Results:RT-PCR and Western blot results showed that the mRNA levels and protein levels of autophagy related proteins and ubiquitin related proteins LC3, LAMP2, α-syn, UBE1, parkin and p27 in the four groups were statistically significant(mRNA: F=99.155, 43.028, 138.464, 28.200, 22.009, 28.147, all P<0.05; F=245.517, 157.634, 315.920, 2 336.472, 477.429, 2 350.201, all P<0.05). The mRNA and protein levels of LC3, Lamp2, α-syn and p27 in SKP1 interference group were lower than those in MPP+ group (all P<0.05), while the mRNA and protein levels of UBE1 and parkin were higher than those in MPP+ group (all P<0.05). The mRNA and protein levels of LC3, α-syn and p27 in SKP1 interference+ MG132 group were higher than those in SKP1 interference group (all P<0.05), and the mRNA and protein levels of UBE1 and parkin were lower than those in SKP1 interference group (all P<0.05). The results of flow cytometry and CCK-8 method showed that the apoptosis rate and cell inhibition rate among the four groups were significantly different( F=2 749.420, 171.508, both P<0.05). The apoptosis rate of SKP1 interference group was lower than that of MPP+ group ((8.22±0.25)%, (15.30±0.21)%, P<0.05), while the cell inhibition rate of SKP1 interference group was lower than that of MPP+ group((26.31±3.73)%, (55.05±3.84)%, P<0.05). The apoptosis rate of SKP1 interference+ MG132 group ((9.49±0.07)%) was higher than that of SKP1 interference group, and the cell inhibition rate ((36.06±2.85)%) was higher than that of SKP1 interference group (both P<0.05). The results of immunoprecipitation method showed that P27 decreased after SKP1 immunoprecipitation. Conclusion:After SKP1 gene was interfered, the autophagy function of PD cells decreased, which may be related to parkin promoting α-syn ubiquitination, activating UBE1/ Parkin-mediated UPS pathway to degrade α-syn, and mediating P27 to inhibit apoptosis.

Objective To study the techniques and outcomes of using a retrograde pedicled vascularized radius bone flap based on the 1st,2nd intercompartmental supraretinacular artery (1,2ICSRA) for scaphoid nonunion through dorsal and palmar approaches.Methods Between March 2013 and April 2015,16 patients with scaphoid nonunion were treated by surgery through palmar and dorsal approaches.There were 14 males and 2 females with an average age of 29.1 years (range,19-51 years).The location of lesion was 6 cases on the left and 10 cases on the right.5 cases were treated with plaster fixation.11 cases weren't treated after wrists injured.The preoperative time was 6-26 months,with an average of 16.5 months.The operation was completed within one incision.The bone flaps based on 1,2ICSRA were taken through dorsal approach.The broken ends of the scaphoid fracture were cleaned,and the deformity was corrected with bone grafting and internal fixation through palmar approach.Time of fracture union and wrist pain resolution was evaluated.Wrist motion and grip strength were measured and compared.The result of the latest follow-up was used as the criterion for efficacy evaluation.The wrist pain was evaluated using visual analogue scale (VAS) and the postoperative wrist function based on the modified Mayo wrist score was recorded.Results Post-operative follow up ranged from 6-19 months,with an average of 11 months.Bone union was achieved in all the cases,so the healing rate was 100％.7 cases were healed in 11 weeks.5 cases were healed in 13 weeks.3 cases were healed in 15 weeks.1 case was healed in 17 weeks.The average healing time was 12.5 weeks.The humpback deformity of Scaphoid and DISI of 7 cases were corrected.The bending of wrist could reach 60.2°±3.2°,and the elongation could reach 51.3°± 3.5°.The radial deviation of wrist could reach 13.6°±1.42°,and ulnar deviation could reach 24.4°±1.8°.The range of grip strength was 29-64 kg,with an average of 45 kg.The 16 patients returned to normal work.The pain after wrist movement of 14 cases was completely disappeared,and the VAS was 0.Two cases felt slight pain when wrist was overworked,and the VAS were 0.9 and 1.2.The wrist joint function of patients recovered well.The modified Mayo score was 69-99,with an average of 90.75.The functional results were 12 excellent,2 good,and 2 fair,and the excellent and good rate was 87.5％ (14/16).No complications such as infection,failure of screws,orthopaedic arthritis or scaphoid necrosis were found during the follow-up period.Conclusion The technique of 1,2 ICSRA pedicled bone graft and palmar bone grafting for nonunion of scaphoid can provide convenience for us to deal with the broken ends of the scaphoid fracture,correct the malformation and graft bone through dorsal and palmar approaches.This method can protect the blood supply of the scaphoid,and promote scaphoid union.

OBJECTIVE:To determine the contents of Pb,Cd,Hg,As and Cu in Panax notoginseng,Angelica sinensis,Ligus-ticum chuanxiong,Fallopia multiflora and Rheum palmatum commercially available in Tangshan. METHODS:Microwave diges-tion-inductively coupled plasma mass spectrometry(ICP-MS)and single factor index and Nemerow comprehensive index were used to evaluate the heavy metal pollution in TCM powder samples;and the heavy metal limiting values in Green Trade Standards of Im-porting & Exporting Medical Plants & Prescriptions were used to evaluate the pollution of heavy metal samples. RESULTS:In the samples in 12 batches of 5 TCM powders,there were 2 heavy metal exceeded samples (P. notoginseng-3 and L. chuanxiong-2), the exceeded rate was 16.7%,exceeded indexes were Cd and Hg with the exceeded rates of 16.7% and 8.3%,respectively;heavy metals with Single factor index greater than 1 were Hg and Cd in P. notoginseng-3,and Cd in L. chuanxiong-2 with the composite indexes of 1.06 and 0.81,and pollution levels were slightly polluted and reaching warning level,respectively. CONCLUSIONS:Certain heavy metal pollution is found in TCM powder commercially available in Tangshan. Therefore,it is necessary to carry out more strictly control over the heavy metal content in Chinese herbal medicines.

Not only calmodulin (CAM) with Ca2+ regulates the activity of many enzymes and proteins, but also free-CaM (no Ca2+bound) and Ca2+-independent CaM-binding proteins play roles in plant and animal cells. There is no in vivo method to identify the interaction between free-CaM and Ca2+-independent CaM-binding protein (CaMBP). Using site-directed mutagenesis by polymerase chain reaction (PCR), 5 mutant Arabidopsis calmodulin isoform 2 (AtCaM2) genes, mCaM21, mCoM212,mCaM2123, mCaM2124 and mCaM21234 were obtained. The mutant mCaM2 encoded glutamine in place of glutamate (E32Q; E68Q; E105Q; E141Q) in one or more EF-hand Ca2+-binding motifs of AtCaM2. The recombinant mCaM2 proteins were produced in Escherichia coli, and subsequently separated on SDS-PAGE in the presence of Ca2+ or EGTA, their electrophoresis mobilities were related with that of mutant EF-hand motifs. 45Ca2+ overlay analysis indicated that the more glutamate replaced by glutamine, the lower affinity with Ca2+ in the mCaM2 proteins. The mCaM21234 mutant protein (E32Q; E68Q; E105Q;E141Q) was unable to bind Ca2+. Using yeast two-hybrid technique with mCaM21234 as bait, it was possible to see interaction in Arabidopsis of AtCaM2 with IQD26, a calcium-independent CaM-binding protein. Site-directed mutation of AtCaM2 will aid the research of Ca2+, CaM and Ca2+-independent CaMBPs in plant biological processes.

Currently, cadre information management has a development trend of digitalization and intelligentization. and this evolution Can meet the modern high-tech war demand that the cadres be rapidly regulated and high level persons with ability be reasonably equipped. New-generation combat readiness archive kit developed in this paper applies advanced protective apparel and related modern informatized device, and can improve the field usage and management of cadre archives.