Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

Objective To understand the surveillance situation of poliovirus in Guangzhou from 2011 to 2024, and to further strengthen polio surveillance and ensure the continued maintenance of a polio-free status. Methods An analysis was conducted on the discovery and investigation results of six cases of vaccine-derived poliovirus (VDPV) detected in Guangzhou. Results A total of 6 VDPV incidents were reported in Guangzhou from 2011 to June 2024, among which 5 incidents were from sewage sample testing in the Liede Sewage Treatment Plant in Guangzhou, all of which were confirmed as VDPV, with 1 for type I, 1 for type II, and 3 for type III. In addition, one confirmed HFMD case was identified as a type VDPV II carrier. No presence of any wild poliovirus (WPV), VDPV cases, or circulating VDPV (cVDPV) was reported. Conclusion Guangzhou City has maintained a high level of vigilance and effectiveness in the monitoring and prevention of polio. Continuously strengthening the construction of the polio monitoring network, optimizing vaccination strategies, and comprehensively improving public health awareness are still the focus of the prevention and control work in the future.

The rapid development of artificial intelligence (AI), especially generative AI (GenAI), has already brought, and will continue to bring, revolutionary changes to our daily production and life, as well as create new opportunities and challenges for diagnostic and therapeutic practices in the medical field. Haihe Hospital of Tianjin University collaborates with the National Supercomputer Center in Tianjin, Tianjin University, and other institutions to carry out research in areas such as smart healthcare, smart services, and smart management. We have conducted research and development of a full-process disease diagnosis and treatment assistance system based on GenAI in the field of smart healthcare. The development of this project is of great significance. The first goal is to upgrade and transform the hospital's information center, organically integrate it with existing information systems, and provide the necessary computing power storage support for intelligent services within the hospital. We have implemented the localized deployment of three models: Tianhe "Tianyuan", WiNGPT, and DeepSeek. The second is to create a digital avatar of the chief physician/chief physician's voice and image by integrating multimodal intelligent interaction technology. With generative intelligence as the core, this solution provides patients with a visual medical interaction solution. The third is to achieve deep adaptation between generative intelligence and the entire process of patient medical treatment. In this project, we have developed assistant tools such as intelligent inquiry, intelligent diagnosis and recognition, intelligent treatment plan generation, and intelligent assisted medical record generation to improve the safety, quality, and efficiency of the diagnosis and treatment process. This study introduces the content of a full-process disease diagnosis and treatment assistance system, aiming to provide references and insights for the digital transformation of the healthcare industry.
Artificial Intelligence ; Humans ; Delivery of Health Care ; Generative Artificial Intelligence

The structure of intestinal tissue is complex. In vitro simulation of intestinal structure and function is important for studying intestinal development and diseases. Recently, organoids have been successfully constructed and they have come to play an important role in biomedical research. Organoids are miniaturized three-dimensional (3D) organs, derived from stem cells, which mimic the structure, cell types, and physiological functions of an organ, making them robust models for biomedical research. Intestinal organoids are 3D micro-organs derived from intestinal stem cells or pluripotent stem cells that can successfully simulate the complex structure and function of the intestine, thereby providing a valuable platform for intestinal development and disease research. In this article, we review the latest progress in the construction and application of intestinal organoids.
Organoids/cytology* ; Intestines/physiology* ; Humans ; Animals ; Pluripotent Stem Cells

Objective Through reviewing the herbs,medical books and classic prescriptions of the past dynasties,the herbal examination of Gypsum fibrosum and its analogs was carried out to clarify the relationship between them.The qualitative analysis was carried out by single-point Raman,infrared,near infrared and XRD techniques,the quantitative analysis of the main components was carried out by EDTA titration and Raman surface scanning technique,the elemental analysis was carried out by ICP-OES,and the differences between gypsum and argillite were observed by scanning electron microscope.Results Gypsum fibrosum is mixed with marble,feldspar,north cold-water stone,south cold-water stone and xuanjing stone and so on.Before the Ming Dynasty,there was no differentiation between soft and anhydrite,and after the Ming Dynasty,it was clear that gypsum was soft gypsum and feldspar was anhydrite;in modern times,marble is also made to be gypsum for medicinal use;Feldspar is anhydrite and is no longer made to be used for medicinal use,north cold-water stone is red gypsum,and south cold-water stone is calcite.Gypsum,south coldwater stone is calcite.The peaks of argillite appeared to be buried in the Raman spectrum compared with Gypsum fibrosum,and the original profiles of both infrared and near-infrared were basically the same,and the near-infrared model established by the preprocessing method of the first-order derivatives plus vector normalization(5-point smoothing)could effectively differentiate between Gypsum fibrosum and its analogues,but it could not differentiate between argillite and Gypsum fibrosum with high content.XRD showed that there are differences in the relative intensities of the peaks of argillite and Gypsum fibrosum,and some XRD shows that there are differences in the relative intensities of the peaks of basalt and Gypsum fibrosum,and some of the peaks of basalt are characterized by impurities such as quartz,and the contents of trace elements such as Fe,Mn,Cr,Pb,Hg and As are higher in basalt.The peak shapes of XRD,Raman spectra,infrared spectra and near-infrared spectra of Gypsum fibrosum and calcined gypsum are closer but can still be distinguished,and the Ca content of calcined gypsum is higher than that of gypsum.Commercially available south chrysocolla and stalactite source are carbonate minerals calcite calcite.Spectral detection can not be distinguished,the trace element content is basically the same,but the traits are different.North chrysocolla(red gypsum)is higher than the Fe content of commercially available white gypsum.Raman surface scanning not only can be a qualitative and quantitative determination of minerals such as gypsum and other minerals,and the results of the content of the titration is basically similar,but also to determine the state of Gypsum fibrosum and calcined gypsum calcined water loss status and the degree of calcined gypsum.The results of Raman surface scanning are similar to the titration results.Conclusion This study can provide a scientific basis for the traceability of Gypsum fibrosum,and can better guide the clinical use of medicine and the rational use of resources.

Objective To explore the impact of suture configuration and fixation type on the biome-chanical strength of rotator cuff repair,using a factorial design study.Methods Sixteen fresh-frozen porcine shoulder samples were randomized into an anchorless double-row suture bridge transosseous su-tures(DS)group,an anchored double-row suture bridge transosseous-equivalent(DE)group,an an-chorless X-BOX construct transosseous sutures(XS)group,and an anchored X-BOX construct transos-seous-equivalent(XE)group,each of four,according to suture configuration(double-row suture bridge,traditional X-BOX construct)and fixation type(suture anchors,transosseous sutures).Then,their fatigue resistance(first-cycle excursion,gap length difference ratio,and the percentage of ex-posed footprints)and the failure strength(the maximum failure load and the re-tear type)were mea-sured using a biomechanical material testing machine.Results Different suture configurations affected failure strength(F=39.559,P<0.001),with the double-row suture bridge groups(693.07±58.35 N,746.76±138.57 N)showing significantly higher failure strength,compared to the traditional X-BOX groups(462.90±18.91 N,421.43±90.76 N).However,the fixation type did not significantly im-pact failure strength(F=1.161,P=0.302).Moreover,the suture configuration influenced the gap differ-ence ratio(F=7.781,P=0.016),but had no significant correlation with other fatigue resistance indica-tors(P>0.05).Meanwhile,failure strength and fatigue resistance were not correlated with fixation type,and the interaction between suture and fixation type(P>0.05).The incidence of failure types for the four suture configurations was as follows:Type I tendon tear:XS>XE>DS=DE;type II tendon tear:DS>XE>XS=DE;fixing material-related failure:DE>DS=XE=XS.Conclusion The failure strength and gap formation ratio in rotator cuff repair under fatigue loading are influenced by suture configuration,whereas no significant association has been observed with respect to fixation method,whether using transosseous sutures or suture anchors.

Objective:To evaluate the effects and underlying mechanisms of metabolites derived from the kidney-reinforcing, blood circulation-activating, and collateral dredging decoction on the proliferation of multiple myeloma (MM) KM3 cells.Methods:MM KM3 cells in the logarithmic growth phase were treated with 3%, 6%, 9%, or 12% metabolites of kidney-reinforcing, blood circulation-activating, and collateral dredging decoction. Cell viability was assessed using the CCK-8 assay. Apoptosis and necrosis were evaluated using flow cytometry and TUNEL staining. Mitochondrial and cellular ultrastructural changes were examined using transmission electron microscopy. mRNA and protein expression levels of dynamin-related protein 1 (Drp1), mitochondrial fission protein 1 (Fis1), mitochondrial fission factor (MFF), PTEN-induced kinase 1 (Pink1), and E3 ubiquitin ligase (Parkin) were determined through quantitative real-time PCR and western blotting. High-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) combined with network pharmacology, was utilized for reverse verification of the pharmacodynamic mechanisms and therapeutic targets underlying the anti-MM activity of this decoction.Results:The metabolites of the kidney-reinforcing, blood circulation-activating, and collateral dredging decoction inhibited KM3 cell proliferation and induced apoptosis in a dose-dependent manner. Transmission electron microscopy revealed increased mitochondrial fission and autophagic structures, with effects intensifying at higher metabolite concentrations. mRNA and protein expression of Drp1, Fis1, MFF, Pink1, and Parkin were significantly upregulated in treatment groups compared to controls ( P<0.05), with the most pronounced effects observed in the 12% metabolite group ( P<0.01). HPLC-MS/MS identified 121 bioactive compounds in BHTF, which shared 474 overlapping targets with MM. Enrichment analysis suggested that BHTF exerts antitumor effects primarily through apigenin, palmatine, and other key components by modulating TNF, NF-κB, and mitophagy pathways. Conclusion:The kidney-reinforcing and blood circulation-activating and collateral dredging decoction suppresses the proliferation of MM KM3 cells, potentially through mechanisms involving the regulation of mitochondrial dynamics and induction of autophagy.

Objective:To explore the spectrum of genetic variants and phenotypes of Phenylalanine hydroxylase deficiency (PAHD) in Lianyungang area and the correlation between genotype and phenotypes among the patients.Methods:Eighty children with Hyperphenylalaninemia (HPA) diagnosed at the Lianyungang Branch of Jiangsu Provincial Newborn Screening Center between January 2015 and December 2022 were enrolled. Peripheral blood samples were collected for genetic analysis using next generation sequencing (NGS), Sanger sequencing, and multiplex ligation-dependent probe amplification (MLPA) to identify the variants of PAH gene. Clinical and phenotypic data were concurrently analyzed to investigate the correlation between the types of PAH gene variant and phenotypes. This study was approved by the Medical Ethics Committee of Lianyungang Maternal and Child Health Care Hospital (Ethics No.: XM2022041). Results:① PAH variants were identified in 93.75% (75/80) of the children, classified as PAHD cases, while 6.25% (5/80) harbored PTS variants. ② Of the 150 PAH alleles from 75 PAHD children, a total of 152 variants (55 distinct types) were detected, with a detection rate of 100%. 80.26% (122/152) were located in exons, with the main types of variants were missense variants (67.11%, 102/152). 53.29% (81/152) of coding sequence variants occurred in the PAH gene catalytic center region of PAH protein, while 19.74% (30/152) of variants involved non-coding sequences. ③The phenotypes of the 75 PAHD children were evenly distributed. The rescreening Phe concentrations and Phe/Tyr ratios of classic-phenylketonuria (CPKU) and mild-phenylketonuria (MPKU) patients were markedly higher than initial screening values ( P<0.001, P<0.001; P=0.004, P=0.016). The genotypes of the PAHD patients mostly occurred as compound heterozygotes, and different mutation positions and variant types significantly affect the phenotype ( P=0.042, P=0.045). ④APV/GPV genotype-phenotype analysis of 61 patients showed high consistency between predicted and actual phenotypes ( κ=0.755, P<0.001). Conclusion:PAH variants were detected in the most of HPA children in Lianyungang area. The location and type of PAH variants were related to the severity of the phenotype, and the non-coding sequence variants and non-missense variants may aggravate the phenotype, and the APV/GPV model predicted the phenotype was highly consistent with the actual phenotype.

Objective:To analyze the safety and efficacy of multi-vessel minimally invasive cardiac surgery-coronary artery bypass graft(MICS-CABG) through perioperative angiography results and complications.Methods:Clinical data of 1 073 patients who underwent multi-vessel MICS-CABG surgery at Peking University Third Hospital from December 2015 to June 2024 were collected using an ambispective cohort study. Among them, 745 were males(69.4%), with a median age of 65 years(58, 71), and a median ejection fraction of 0.66(0.56, 0.71). Double-vessel or triple-vessel lesions accounted for 932 cases(86.9%), while left main lesions were present in 449 cases(41.8%). The primary outcome was the evaluation of graft patency based on perioperative angiography or coronary artery computed tomography angiography results, while major cardiovascular adverse events during the perioperative period, surgical complications, and other surgical information were secondary outcomes. The clinical efficacy of multi-vessel MICS-CABG was evaluated.Results:In this study, the median number of grafts was 3, and complete revascularization was performed in 1 006 cases(93.8%); total arterial revascularization was performed in 308 cases(28.6%). Perioperative mortality was 11 cases(1.0%), and the main adverse cardiovascular and cerebrovascular events(MACCE) was 50 cases(4.8%). Three cases(0.3%) had poor wound healing, and 79 patients(7.4%) required transfusion. Postoperative coronary angiography was performed in 907 patients(84.5%) and coronary CTA was performed in 52 patients(4.8%), for an overall review rate of 89.4%(959/1073). The overall patency rate of the bridge vessel was 96.9%, and the patency rate of the left internal mammary artery was 98.2%.Conclusion:Multi-vessel MICS-CABG demonstrates excellent perioperative safety and is capable of achieving complete revascularization for the 3 regions of the heart. The quality of the anastomosis and the postoperative patency rate of the grafts is satisfactory.

Objective:To preliminarily establish a sample clot warning model for coagulation screening tests using 5 machine learning methods.Methods:This cross-sectional study collected 7 401 routine screening test samples from Peking Union Medical College Hospital, Chinese Academy of Medical Sciences, from January 1st, 2015, to August 18th, 2024, including 4 786 clotted (positive) and 2 615 qualified (negative) samples for model development. The dataset was divided into Dataset 1 and Dataset 2 based on a reagent change for APTT in December 2018, with separate models developed for each. An additional 2 493 samples (October 31st to November 8th, 2024) were used to evaluate consistency between the model and manual assessment, while 23 200 samples (October 17th to December 31st, 2024) were used for assessing real-world predictive performance. Five machine learning algorithms were employed to develop the clot prediction model: logistic regression (LR), random forest (RF), extreme gradient boosting (XGBoost), naive bayes (NB), and artificial neural network (ANN), with the ANN model constructed using two different hidden layer and neuron parameter settings. Model selection was based on AUC, accuracy, sensitivity, specificity, F1-score, PPV, and NPV, with the optimal model integrated into the LIS for validation.Results:Among the six models using 5 machine learning algorithms, XGBoost demonstrated the highest performance (AUC=0.961, sensitivity=0.945, F1-score=0.934) and robustness to reagent changes ( Z=-1.333, P=0.113). When deployed, the differences between the model's predictions and manual pre-judgment were statistically significant ( Z=-5.289 to 8.933, all P<0.01). The predictive efficacy indices AUC (95% CI), sensitivity, specificity, and accuracy of the XGBoost model deployed in real-world operation of the LIS were 0.939 (0.918—0.960), 0.958, 0.921, and 0.921 respectively. Conclusion:In this study, a clot warning model for coagulation screening samples was established based on the XGBoost algorithm, and its prediction efficacy is good, providing a foundation for intelligent pre-analytical quality control for coagulation screening tests.