ObjectiveTo evaluate the detection specificity for clinical samples and the detection capability for standard substances of five commercially available multiplex polymerase chain reaction (PCR) nucleic acid detection kits (hereinafter referred to as the kits) for respiratory pathogens, and to provide a reference for selecting appropriate detection kits for multi-pathogen nucleic acid testing of respiratory infections. MethodsA total of 60 respiratory pathogen-positive clinical samples with known redults were selected and tested using the five kits (labeled as A, B, C, D, and E). The detection rates and Kappa coefficients were calculated to evaluate the consistency between the results from these kits and those from single-pathogen PCR kits. According to the limit of detection (LOD) provided by the kits, standard substances of respiratory pathogens (including 12 types such as influenza virus, Mycoplasma pneumoniae, and Bordetella pertussis) were diluted to four concentrations (250, 500, 1 000, and 2 000 copies·mL⁻¹). All five kits were used for detection to evaluate their respective detection capabilities. ResultsCompared with the results from single-pathogen PCR kits, the five tested kits demonstrated good consistency (all Kappa >0.80). Among them, Kit A had the highest detection rate (100.00%), followed by Kits C and E (98.33%), and then Kits B and D (95.00%). All five kits showed a relatively low false negative rate (FNR) for samples with a cycle threshold (Ct) value ≤35 (≤2.38%). However, for samples with Ct values>35, the FNR increased accordingly(average FNR=6.67%, P=0.029). Kit C exhibited the highest detection sensitivity for the tested standard substances (average LOD: 458.33 copies·mL⁻¹), followed by Kit D, then Kits A/E, and finally Kit B. ConclusionThe five multiplex PCR kits showed good consistency with single-pathogen detection results, but each had its own performance emphasis. Kit A, with the highest detection rate and high throughput, is suitable for targeted viral screening. Kit B, covering the broadest pathogen spectrum (including fungi/bacteria), is suitable for comprehensive respiratory pathogen screening. Kits C, D and E, are applicable for rapid detection. It is important to note that the detection efficacy of all kits decreases for low viral load samples with Ct values >35. In practical application, selection should be based on specific screening objectives, throughput requirements, and sample types.

ObjectiveTo explore the mechanism by which Xiaoyaosan regulates HPT axis dysfunction in the rat model with the syndrome of liver depression and spleen deficiency by observing its effect on the glycoprotein hormone α-subunit （CGA）/glutathione peroxidase 2 （GPX2）/thyroid-stimulating hormone β-subunit （TSHβ） pathway for thyroid hormone synthesis. MethodsSeventy-two male SD rats were randomized into six groups： normal， model， high-dose （16.7 g·kg^-1）， medium-dose （8.35 g·kg^-1）， and low-dose （4.175 g·kg^-1） Xiaoyaosan， and fluoxetine （0.001 8 g·kg^-1） groups， with 12 rats in each group. The rat model of liver depression and spleen deficiency was induced by chronic restraint stress for 21 days. The intervention groups were treated with Xiaoyaosan decoctions or fluoxetine suspension， respectively. After modeling， hematoxylin-eosin staining was employed to observe morphological changes in the thyroid and pituitary tissue of the rats. Serum levels of triiodothyronine （T3）， tetraiodothyronine （T4）， and thyroid-stimulating hormone （TSH） were measured by enzyme-linked immunosorbent assay （ELISA）. Real-time fluorescence quantitative polymerase chain reaction （Real-time PCR） and Western blot were employed to determine the mRNA and protein levels， respectively， of TSH receptor （TSHR） in the thyroid tissue， thyrotropin-releasing hormone receptor （TRHR） and TSHβ in the pituitary tissue， and thyrotropin-releasing hormone （TRH）， CGA， GPX2， and TSHβ in the hypothalamic tissue. ResultsCompared with the normal group， the model group showed significant atrophy and irregularity of thyroid follicles， a marked reduction in colloid secretion， extensive vacuolar degeneration of adenocytes in the anterior pituitary， lowered serum levels of T3， T4， and TSH （P<0.01）， and down-regulated mRNA and protein levels of TSHR in the thyroid tissue， TRHR and TSHβ in the pituitary tissue， and TRH， CGA， GPX2， and TSHβ in the hypothalamic tissue （P<0.01）. Compared with the model group， high- and medium-dose Xiaoyaosan and fluoxetine alleviated the pathological changes in the thyroid and pituitary tissue， outperforming the low-dose Xiaoyaosan group. Moreover， they elevated the serum levels of T3， T4， and TSH （P<0.05， P<0.01）. The serum TSH level was also elevated in the low-dose Xiaoyaosan group （P<0.05）. The mRNA and protein levels of TSHR in the thyroid， TRHR and TSHβ in the pituitary， and TRH， CGA， GPX2， and TSHβ in the hypothalamus were up-regulated in the high- and medium-dose Xiaoyaosan groups （P<0.05， P<0.01）. Additionally， the mRNA and protein levels of TSHβ in the hypothalamus were up-regulated in the low-dose Xiaoyaosan group （P<0.01）. In the fluoxetine group， the mRNA and protein levels of TSHR in the thyroid， TRHR in the pituitary， and TRH， CGA， and GPX2 in the hypothalamus were up-regulated （P<0.05， P<0.01）. ConclusionThe downregulation of CGA/GPX2/TSHβ pathway may be one of the biological mechanisms underlying HPT axis dysfunction in the rat model with the syndrome of liver depression and spleen deficiency. Xiaoyaosan may regulate the HPT axis dysfunction by up-regulating the CGA/GPX2/TSHβ pathway.

The auxin/indole-3-acetic acid (Aux/IAA) gene family is an important regulator for plant growth hormone signaling, involved in plant growth, development, as well as response to environmental stresses. In the present study, we identified SmIAA7 which is potentially associated with Salvia miltiorrhiza leaf development through comparatively analyzed the transcriptome data from different pinnate leaves. SmIAA7 was successfully isolated from S. miltiorrhiza using the specific primers. Then subsequent bioinformatic analysis, prokaryotic expression and purification, subcellular localization, and induction expression analysis under auxin and abiotic stress were performed. The full-length of SmIAA7 contained an ORF of 684 bp encoding a protein of 227 amino acid with a molecular weight of 25.3 kD. Conserved domain analysis showed that SmIAA7 contains the conserved Aux_IAA domain (pfam02309). Sequence analysis and phylogenetic tree analysis results indicated SmIAA7 was phylogenetically close to IAA7 and IAA14 from other plants, suggesting SmIAA7 involved in plant growth and development as well as response to environmental stresses. The prokaryotic expression vector pET28a-SmIAA7 was constructed and SmIAA7 recombinant protein was successfully expressed in E. coli Rosetta (DE3) strain. Subcellular localization experiment demonstrated that SmIAA7 localized in the nucleus of plant cells. Real-time fluorescence quantitative PCR results showed that the expression level of SmIAA7 was upregulated in response to auxin. Drought, low temperature, and salt stress significantly increased the transcript level of SmIAA7 gene. This study lays a foundation for further elucidating the role of SmIAA7 in leaf development, signal transduction, and stress defense in S. miltiorrhiza.

Eight compounds were isolated and purified from the ethyl acetate part of 70% acetone extract of Rehmannia glutinosa by various chromatographic techniques such as silica gel, MCI gel CHP-20, ODS, Toyopearl HW-40C, combined with TLC and semi-preparative HPLC. Their structures were elucidated by modern spectroscopy techniques (NMR, MS, UV, IR), and identified as neomartynoside A (1), osmanthuside B₆ (2), martynoside (3), isomartynoside (4), (E)-p-hydroxycinnamic acid (5), caffeic acid (6), ferulic acid (7), and methyl caffeate (8). Compound 1 is a new phenylethanol glycoside, which was identified as neomartynoside A. Compound 2 was isolated from Rehmannia glutinosa for the first time. In addition, compounds 2, 6 and 7 significantly increased relative glucose consumption, showing potential hypoglycemic activity.

Objective: To evaluate the application of blood conservation measures in obstetric patients with different red blood cell transfusion volumes and to assess the impact of different transfusion volumes on postpartum outcomes. Methods: A retrospective investigation was conducted on 448 obstetric patients who received blood transfusions at the Shanghai General Hospital, Shanghai Jiao Tong University School of Medicine from January 2016 to December 2022. Patients were divided into four groups (1-2 units group, 3-4 units group, 5-6 units group, and >6 units group) based on the volumes of red blood cells (RBCs) transfused during and within 7 days after delivery. The maternal physiological indicators, pre- and postpartum laboratory test indicators, obstetric complications, application of blood conservation measures, use of blood products, and postpartum outcomes were reviewed. The clinical characteristics, application of blood conservation measures, and their impact on postpartum outcomes were compared among different transfusion groups. Results: There were statistically significant differences in the multivariate logistic analysis of history of previous cesarean section (OR=1.781), eclampsia/pre-eclampsia/(OR=1.972) and postpartum blood loss>1 000 mL（OR=1.699）(P<0.05) among different transfusion groups. In terms of blood conservation measures, the more RBCs transfused, the higher the rate of mothers receiving blood conservation measures such as balloon occlusion, arterial ligation, autologous blood transfusion with a cell saver, and hysterectomy. With the increase in the volume of RBCs transfusion, the demand for fresh frozen plasma（FFP）, cryoprecipitate, and platelet transfusions also increased. The hospitalization days for the four groups of parturients were 6.0 (4.0-9.0), 7.5 (5.0-14.8), 7.0 (4.5-13.0) and 11.0 (9.0-20.5), respectively (P<0.05) and the rates of ICU transfer were 2.0% (5/250), 9.4% (12/128),18.2% (6/33) and 51.4% (19/37), respectively (P<0.05). Both increased significantly with the increase in the volume of RBCs transfusion, and the differences between groups were statistically significant. Conclusion: Parturients who received higher volume of RBCs had multiple risks factors for bleeding before childbirth, had higher postpartum blood loss, and had a higher rate of application of various blood conservation measures. In addition, an increase in the volume of RBCs transfusion may have adverse effects on postpartum recovery.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Background: s/Aims: Sarcomatoid hepatocellular carcinoma (HCC) is a rare histological subtype of HCC characterized by extremely poor prognosis; however, its molecular characterization has not been elucidated. Methods: In this study, we conducted an integrated multiomics study of whole-exome sequencing, RNA-seq, spatial transcriptome, and immunohistochemical analyses of 28 paired sarcomatoid tumor components and conventional HCC components from 10 patients with sarcomatoid HCC, in order to identify frequently altered genes, infer the tumor subclonal architectures, track the genomic evolution, and delineate the transcriptional characteristics of sarcomatoid HCCs. Results: Our results showed that the sarcomatoid HCCs had poor prognosis. The sarcomatoid tumor components and the conventional HCC components were derived from common ancestors, mostly accessing similar mutational processes. Clonal phylogenies demonstrated branched tumor evolution during sarcomatoid HCC development and progression. TP53 mutation commonly occurred at tumor initiation, whereas ARID2 mutation often occurred later. Transcriptome analyses revealed the epithelial–mesenchymal transition (EMT) and hypoxic phenotype in sarcomatoid tumor components, which were confirmed by immunohistochemical staining. Moreover, we identified ARID2 mutations in 70% (7/10) of patients with sarcomatoid HCC but only 1–5% of patients with non-sarcomatoid HCC. Biofunctional investigations revealed that inactivating mutation of ARID2 contributes to HCC growth and metastasis and induces EMT in a hypoxic microenvironment. Conclusions We offer a comprehensive description of the molecular basis for sarcomatoid HCC, and identify genomic alteration (ARID2 mutation) together with the tumor microenvironment (hypoxic microenvironment), that may contribute to the formation of the sarcomatoid tumor component through EMT, leading to sarcomatoid HCC development and progression.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.