Childhood simple obesity has become a significant public health issue in China. Modern medicine primarily relies on lifestyle interventions and often suffers from poor long-term compliance， while pharmacological options are limited and associated with potential adverse effects. Traditional Chinese Medicine （TCM） has a long history in the prevention and management of this condition， demonstrating eight distinct advantages， including systematic theoretical foundation， diversified therapeutic approaches， definite therapeutic efficacy， high safety profile， good patient compliance， comprehensive intervention strategies， emphasis on prevention， and stepwise treatment protocols. Additionally， TCM is characterized by six distinctive features： the use of natural medicinal substances， non-invasive external therapies， integration of medicinal dietetics， simple exercise regimens， precise syndrome differentiation， and diverse dosage forms. By combining internal and external treatments， TCM facilitates individualized regimen adjustment and holistic regulation， demonstrating remarkable effects in improving obesity-related metabolic indicators， regulating constitutional imbalance， and promoting healthy behaviors. However， challenges remain， such as inconsistent operational standards， insufficient high-quality clinical evidence， and a gap between basic research and clinical application. Future efforts should focus on accelerating the standardization of TCM diagnosis and treatment， conducting multicenter randomized controlled trials， and fostering interdisciplinary integration， so as to enhance the scientific validity and international recognition of TCM in the prevention and treatment of childhood obesity.

Objective: To understand the microclimate in primary and secondary school classrooms for the study period during the winter heating season, so as to provide a reference for the revision and improvement of relevant health standards. Methods: In December 2024, stratified random sampling was used to select 30 primary and secondary schools and 180 classrooms from the northern regions with centralized heating (Liaoning Province, Tianjin City) and the southern regions without centralized heating (Shanghai City, Anhui Province, and Jiangxi Province). Indoor temperature, relative humidity, wind speed, CO 2 and other indicators were measured on site. Variance analysis, t-test, Mann-Whitney U test and Kruskal-Wallis H test were used to analyze the differences in the microclimate of classrooms among regions and urban and rural differences. Results: The average temperature in the middle of the classrooms tested on site was (16.47±4.72)℃, and the variance analysis showed that the difference between the regions was statistically significant ( F=27.80, P <0.01). Among them, Tianjin had the highest average temperature of (20.43± 2.12 )℃, followed by Liaoning (19.03±2.23)℃, Shanghai (15.33±5.32)℃, Anhui (12.79±1.74)℃, and Jiangxi (11.69± 1.68 )℃. Horizontal temperature difference was 0.90 (0.50, 1.60)℃, the vertical temperature difference was 0.20 (0.10,0.60)℃, the average relative humidity was (44.39±16.16)%, the wind speed was 0.03(0.01,0.11)m/s, and the differences among different provinces and cities were statistically significant ( H/F =40.62, 82.69, 95.06, 55.28, all P <0.01). The average CO 2 volume concentration in urban areas of Tianjin, Liaoning, and Shanghai was 0.21(0.16,0.30)%, and there was no statistically significant difference ( H=4.65, P =0.10). There were grade differences in relative humidity ( F =3.71, 6.21) and CO 2 ( H =14.72, 12.92) in the north and the south (all P <0.05). In addition, the temperature, relative humidity, wind speed and CO 2 in the middle of the classroom were 42.8%, 67.8%, 100.0% and 22.2% respectively. Conclusions The temperature in the middle of the classroom in the non centralized heating area is lower than the standard, the relative humidity of classroom in the centralized heating area is lower than the standard，and the CO 2 in the classroom in winter is lower than the standard. It is recommended to install heating facilities in schools with low temperatures to increase the temperature and increase the frequency of ventilation in classrooms or adopt mechanical ventilation strategies to reduce CO 2 volume concentration.

[Objective] To establish a new scoring system to predict the perioperative outcomes (operation time, intraoperative blood loss, and trifecta achievement) in patients undergoing robot-assisted partial nephrectomy (RAPN) by integrating the RENAL and Mayo adhesive probability (MAP) scores. [Methods] Clinical data of 178 patients with renal cell carcinoma who underwent RAPN performed by the same surgeon in our hospital during Jan.2015 and Jan.2022 were retrospectively analyzed.The RENAL and MAP scores of all patients were calculated.Linear regression and logistic regression were used to evaluate the associations between the components of the RENAL and MAP scores (a total of 6 variables) and perioperative outcomes.The factors with significant associations were then included into logistic regression analysis to identify independent predictors for constructing an assessment system for perioperative outcomes, and the receiver operating characteristic (ROC) curve was plotted to calculate the area under the curve (AUC) to predict its efficacy. [Results] Multivariate linear regression analysis showed that tumor size (β=6.14, 95%CI: 1.93—10.34, P=0.004), exophytic rate (β=10.60, 95%CI: 3.44—17.76, P=0.004), and perinephric fat thickness (β=16.48, 95%CI: 8.52—24.45, P<0.001) were significantly associated with operation time.Tumor size (β=10.55 95%CI: 5.60—15.49, P<0.001) was associated with both intraoperative blood loss and trifecta achievement (OR=1.73, 95%CI: 1.26—2.36, P=0.001). Multivariate logistic regression analysis of these 3 factors identified tumor size (OR=9.07, 95% CI: 1.18—69.45, P=0.03) and perinephric fat thickness (OR=2.28, 95%CI: 1.86—6.04, P=0.01) as independent predictors of perioperative outcomes.Based on these findings, the tumor size and perinephric fat thickness (RP) scoring was constructed, which demonstrated better predictive ability than RENAL score or MAP score alone (RP vs.RENAL vs.MAP: 0.766 vs.0.548 vs.0.684). [Conclusion] The RP score includes fewer variables than the RENAL and MAP scores but outperforms them.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Pancreatic cancer is a kind of highly malignant tumor with a low survival rate and poor prognosis. The effectiveness of gemcitabine as a first-line chemotherapy drug is limited; however, it can activate dendritic cells and improve antigen presentation which increase the sensitivity of tumor cell to immunotherapy. Although immunotherapy has made some advancements in cancer treatment, the therapeutic benefit of programmed cell death receptor 1/programmed death receptor-ligand 1 (PD-1/PD-L1) blockade therapy remains relatively low. The chemokine C-X-C chemokine ligand 12 (CXCL12) contributes to an immunosuppressive tumor microenvironment by recruiting immunosuppressive cells. The receptor C-X-C motif chemokine receptor 4 (CXCR4), highly expressed in various tumors including pancreatic cancer, plays a crucial role in tumor development and progression. In this study, the anti-tumor immune response of human peripheral blood mononuclear cell (hPBMC) was enhanced using the combination of BsNb PX4 (anti-PD-L1&CXCR4 bispecific nanobody) and gemcitabine. In a co-culture system of gemcitabine-pretreated hPBMCs with tumor cells, the BsNb PX4 synergized gemcitabine to improve the cytotoxic activity of hPBMCs against tumor cells. Flow cytometry analysis confirmed increased ratio of CD8⁺ to CD4⁺ T cells in combination treatment. In NOD/SCID mice bearing pancreatic cancer, the combination treatment exhibited more infiltration of CD8⁺ T cells into tumor tissues, contributing to an effective anti-tumor response. This study presents potential new therapies for the treatment of pancreatic cancer. Ethical approval was obtained for collection of hPBMC samples from the Local Ethics Committee of Shanghai Jiao Tong University. All animal experiments were approved by the Animal Ethic Committee of Shanghai Jiao Tong University (authorizing number: A2024246).

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective To investigate the ultrasonographic characteristics of acute Stanford type A aortic dissection (ATAAD) involving the renal arteries and their relationship with renal function. Methods Patients with ATAAD admitted to Deyang People's Hospital from February 2013 to May 2023 were selected for the study. Based on whether the renal arteries were involved in the dissection, the patients were divided into two groups: a renal artery involvement group and a renal artery non-involvement group. General data and ultrasound characteristics of the two groups were compared. Logistic regression analysis and model correction were performed to analyze the relationship between ultrasound characteristics and renal function involvement in ATAAD patients. Receiver operating characteristic (ROC) curves were used to evaluate the predictive value of ultrasound characteristics for renal artery involvement in ATAAD patients. Additionally, patients in the renal artery involvement group were divided into normal renal function and abnormal renal function subgroups based on serum blood urea nitrogen (BUN) and serum creatinine (Scr) levels. Clinical data of the two subgroups were compared, and a log-binomial model was used to analyze the risk effects of ultrasound characteristics for abnormal renal function. Pearson correlation analysis was performed to assess the correlation between ultrasound characteristics of renal artery involvement and renal function indicators. Results A total of 163 patients were included, consisting of 106 males and 57 females, with a mean age of (50.06±10.46) years (ranging from 20 to 85 years). Significant differences in gender, Scr, and BUN were observed between the renal artery involvement group and the renal artery non-involvement group (P<0.001). Compared to the renal artery non-involvement group, the renal artery involvement group had an increased ascending aorta diameter, a greater proportion of ascending aortic dilation and poor renal perfusion (P<0.05). Logistic regression analysis indicated that ascending aorta diameter, ascending aortic dilation, and poor renal perfusion were independent factors for renal artery involvement (P<0.05). Ultrasonographic characteristics showed good predictive ability for renal artery involvement in ATAAD patients. Furthermore, the combination of the three characteristics yielded a higher predictive value for renal artery involvement. Compared to the normal renal function group, the abnormal renal function group had higher BUN and Scr levels, increased ascending aortic diameter, a greater proportion of ascending aortic dilation and poor renal perfusion (P<0.05). The log-binomial model analysis revealed that the risk ratios for ascending aortic diameter, ascending aortic dilation, and poor renal perfusion were statistically significant both before and after adjustment (P<0.05). Pearson correlation analysis revealed that ascending aortic diameter, ascending aortic dilation, and poor renal perfusion were strongly correlated with renal function parameters (P<0.05). Conclusion Ultrasound characteristics of ATAAD involving the renal arteries are associated with renal function. Ascending aorta diameter, ascending aortic dilation, and poor renal perfusion are independent risk factors for abnormal renal function.