Objective: To understand the microclimate in primary and secondary school classrooms for the study period during the winter heating season, so as to provide a reference for the revision and improvement of relevant health standards. Methods: In December 2024, stratified random sampling was used to select 30 primary and secondary schools and 180 classrooms from the northern regions with centralized heating (Liaoning Province, Tianjin City) and the southern regions without centralized heating (Shanghai City, Anhui Province, and Jiangxi Province). Indoor temperature, relative humidity, wind speed, CO 2 and other indicators were measured on site. Variance analysis, t-test, Mann-Whitney U test and Kruskal-Wallis H test were used to analyze the differences in the microclimate of classrooms among regions and urban and rural differences. Results: The average temperature in the middle of the classrooms tested on site was (16.47±4.72)℃, and the variance analysis showed that the difference between the regions was statistically significant ( F=27.80, P <0.01). Among them, Tianjin had the highest average temperature of (20.43± 2.12 )℃, followed by Liaoning (19.03±2.23)℃, Shanghai (15.33±5.32)℃, Anhui (12.79±1.74)℃, and Jiangxi (11.69± 1.68 )℃. Horizontal temperature difference was 0.90 (0.50, 1.60)℃, the vertical temperature difference was 0.20 (0.10,0.60)℃, the average relative humidity was (44.39±16.16)%, the wind speed was 0.03(0.01,0.11)m/s, and the differences among different provinces and cities were statistically significant ( H/F =40.62, 82.69, 95.06, 55.28, all P <0.01). The average CO 2 volume concentration in urban areas of Tianjin, Liaoning, and Shanghai was 0.21(0.16,0.30)%, and there was no statistically significant difference ( H=4.65, P =0.10). There were grade differences in relative humidity ( F =3.71, 6.21) and CO 2 ( H =14.72, 12.92) in the north and the south (all P <0.05). In addition, the temperature, relative humidity, wind speed and CO 2 in the middle of the classroom were 42.8%, 67.8%, 100.0% and 22.2% respectively. Conclusions The temperature in the middle of the classroom in the non centralized heating area is lower than the standard, the relative humidity of classroom in the centralized heating area is lower than the standard，and the CO 2 in the classroom in winter is lower than the standard. It is recommended to install heating facilities in schools with low temperatures to increase the temperature and increase the frequency of ventilation in classrooms or adopt mechanical ventilation strategies to reduce CO 2 volume concentration.

OBJECTIVE: To explore the serological and molecular genetic characteristics of a family with subtype B(A)06. METHODS: A neonatal hyperbilirubinemia patient who was treated at Henan Children's Hospital on June 15, 2023 due to "yellowing of the skin and gradual aggravation", and was found to have inconsistent ABO forward and reverse typing through blood type testing, was selected as the research subject. Six milliliters of peripheral blood were collected from the newborn and her family members (grandfather, grandmother, father, mother and aunt) respectively. ABO blood group identification was performed by the blood group serological method. Human genomic DNA was extracted using the nucleic acid extraction or purification reagent BT-01. ABO gene exons 2 to 7 were amplified by PCR. The PCR-specific products that were successfully amplified were sequenced by Sanger method. Taking ABO*A1.01 as the reference sequence, the ABO gene sequences of the newborn and her family members were analyzed to determine the ABO genotype. The procedures followed in this study were approved by the Ethics Committee of Henan Children's Hospital (Ethics No.: 2022-K-L036). RESULTS: The serological results of ABO blood group showed that the newborn, her grandfather, father and aunt were all incompatible with the forward and reverse typing. The blood group phenotype of the newborn was AwB or B(A), the blood group phenotype of the grandfather was A2B or B(A), the blood group phenotype of the father and aunt were A2B, and the blood group phenotype of the grandmother and mother were both O. The screening test results of hemolytic disease of the newborn showed that the free test detected IgG anti-A1 antibody, while the elution test, direct antiglobulin test and antibody screening results were all negative. The Sanger sequencing results showed that the newborn had variations of c.261delG, c.297A>G, c.526C>G, c.657C>T, c.703G>A, c.796C>A and c.930G>A. Her grandfather had variations of c.297A>G, C.526C>G, c.657C>T, c.703G>A, c.796C>A, c.803G>C and c.930G>A. Her grandmother had variations of c.106G>T, c.188G>A, c.189C>T, c.220C>T, c.261delG, c.297A>G, c.646T>A, c.681G>A, c.771C>T and c.829G>A. Her father and aunt had variations of c.106G>T, c.188G>A, c.189C>T, c.220C>T, c.261delG, c.297A>G, c.526C>G, c.646T>A, c.657C>T, c.681G>A, c.703G>A, c.771C>T, c.796C>A, c.829G>A and c.930G>A. Her mother had variations of c.106G>T, c.188G>A, c.189C>T, c.220C>T, c.261delG, c.297A>G, c.646T>A, c.681G>A, c.771C>T, and c.829G>A.The genotype of the newborn was ABO*BA.06/ABO*O.01.01, her grandfather was ABO*BA.06/ABO*B.01, her grandmother was ABO*O.01.02/ABO*O.01.02, her father and aunt were ABO*BA.06/ABO*O.01.02, and her mother was ABO*O.01.01/ABO*O.01.02. The ABO*BA.06 allele of the newborn, grandfather, father and aunt was caused by the c.803C>G variation in exon 7 based on the ABO*B.01 allele. The ABO*BA.06 allele can be stably inherited in this family. CONCLUSION The blood type of neonatal patients with B(A)06 subtype can be accurately determined by gene sequencing technology. If the forward typing is ≤ 3+ agglutination intensity in newborn ABO blood group identification, the reason should be carefully analyzed, and the molecular biology technology and family gene sequencing results should be used to jointly determine if necessary.
Humans ; ABO Blood-Group System/genetics* ; Female ; Pedigree ; Male ; Infant, Newborn ; Asian People/genetics* ; Genotype ; China ; Blood Grouping and Crossmatching ; Hyperbilirubinemia, Neonatal/blood* ; East Asian People

ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

Lung transplantation is currently the only effective treatment for end-stage lung disease. However, the field of lung transplantation still faces numerous challenges, including donor shortage, primary graft dysfunction, rejection, infection and others. In 2025, scholars worldwide have made remarkable progress in clinical research on lung transplantation. This article systematically reviews the cutting-edge developments in clinical research on lung transplantation in 2025, focusing on the application of novel evaluation tools in donor lung screening, optimization of lung perfusion techniques, exploration of extracorporeal membrane oxygenation and robot-assisted minimally invasive surgery, as well as mechanistic research and intervention strategies for primary graft dysfunction, acute kidney injury and chronic lung allograft dysfunction. Meanwhile, hot topics such as the management of special populations, prevention and control of postoperative infections, and improvement of quality of life are summarized. This review aims to conclude the important annual research findings and provide references for the clinical practice and research development of lung transplantation in China.

ObjectiveTo elucidate the critical role of rehabilitation medical records (including electronic records) in rehabilitation medicine's clinical practice and management, comprehensively analyzed the structure, core content and data standards of rehabilitation medical records, to develop a standardized medical record data architecture and core dataset suitable for rehabilitation medicine and to explore the application of rehabilitation data in performance evaluation and payment. MethodsBased on the regulatory documents Basic Specifications for Medical Record Writing and Basic Specifications for Electronic Medical Records (Trial) issued by National Health Commission of China, and referencing the World Health Organization (WHO) Family of International Classifications (WHO-FICs) classifications, International Classification of Diseases (ICD-10/ICD-11), International Classification of Functioning, Disability and Health (ICF), and International Classification of Health Interventions (ICHI Beta-3), this study constructed the data architecture, core content and data standards for rehabilitation medical records. Furthermore, it explored the application of rehabilitation record summary sheets (home page) data in rehabilitation medical statistics and payment methods, including Diagnosis-related Groups (DRG), Diagnosis-Intervention Packet (DIP) and Case Mix Index. ResultsThis study proposed a systematic standard framework for rehabilitation medical records, covering key components such as patient demographics, rehabilitation diagnosis, functional assessment, rehabilitation treatment prescriptions, progress evaluations and discharge summaries. The research analyzed the systematic application methods and data standards of ICD-10/ICD-11, ICF and ICHI Beta-3 in the fields of medical record terminology, coding and assessment. Constructing a standardized data structure and data standards for rehabilitation medical records can significantly improve the quality of data reporting based on the medical record summary sheet, thereby enhancing the quality control of rehabilitation services, effectively supporting the optimization of rehabilitation medical insurance payment mechanisms, and contributing to the establishment of rehabilitation medical performance evaluation and payment based on DRG and DIP. ConclusionStructured rehabilitation records and data standardization are crucial tools for quality control in rehabilitation. Systematically applying the three reference classifications of the WHO-FICs, and aligning with national medical record and electronic health record specifications, facilitate the development of a standardized rehabilitation record architecture and core dataset. Standardizing rehabilitation care pathways based on the ICF methodology, and developing ICF- and ICD-11-based rehabilitation assessment tools, auxiliary diagnostic and therapeutic systems, and supporting terminology and coding systems, can effectively enhance the quality of rehabilitation records and enable interoperability and sharing of rehabilitation data with other medical data, ultimately improving the quality and safety of rehabilitation services.

ObjectiveTo explore the data standard system of electronic medical records in the field of rehabilitation, focusing on the terminology and coding standards, data structure, and key content categories of rehabilitation electronic medical records. MethodsBased on the Administrative Norms for the Application of Electronic Medical Records issued by the National Health Commission of China, the electronic medical record standard architecture issued by the International Organization for Standardization and Health Level Seven (HL7), the framework of the World Health Organization Family of International Classifications (WHO-FICs), Basic Architecture and Data Standards of Electronic Medical Records, Basic Data Set of Electronic Medical Records, and Specifications for Sharing Documents of Electronic Medical Records, the study constructed and organized the data structure, content, and data standards of rehabilitation electronic medical records. ResultsThe data structure of rehabilitation electronic medical records should strictly follow the structure of electronic medical records, including four levels (clinical document, document section, data set and data element) and four major content areas (basic information, diagnostic information, intervention information and cost information). Rehabilitation electronic medical records further integrated information related to rehabilitation needs and characteristics, emphasizing rehabilitation treatment, into clinical information. By fully applying the WHO-FICs reference classifications, rehabilitation electronic medical records could establish a standardized framework, diagnostic criteria, functional description tools, coding tools and terminology index tools for the coding, indexing, functional description, and analysis and interpretation of diseases and health problems. The study elaborated on the data structure and content categories of rehabilitation electronic medical records in four major categories, refined the granularity of reporting rehabilitation content in electronic medical records, and provided detailed data reporting guidance for rehabilitation electronic medical records. ConclusionThe standardization of rehabilitation electronic medical records is significant for improving the quality of rehabilitation medical services and promoting the rehabilitation process of patients. The development of rehabilitation electronic medical records must be based on the national and international standards. Under the general electronic medical records data structure and standards, a rehabilitation electronic medical records data system should be constructed which incorporates core data such as disease diagnosis, functional description and assessment, and rehabilitation interventions. The standardized rehabilitation electronic medical records scheme constructed in this study can support the improvement of standardization of rehabilitation electronic medical records data information.

ObjectiveTo analyze the data structure and standards of rehabilitation outpatient medical records, to provide data support for improving the quality of rehabilitation outpatient care and developing medical insurance payment policies. MethodsBased on the normative documents issued by the National Health Commission, Basic Standards for Medical Record Writing and Standards for Electronic Medical Record Sharing Documents, in accordance with the Quality Management Regulations for Outpatient (Emergency) Diagnosis and Treatment Information Pages (Trial), reference to the framework of the World Health Organization Family of International Classifications (WHO-FICs), the data framework and content of rehabilitation outpatient medical records were determined, and the data standards were discussed. ResultsThis study constructed a data framework for rehabilitation outpatient medical records, including four main components: patient basic information, visit process information, diagnosis and treatment information, and cost information. Three major reference classifications of WHO-FICs, International Classification of Diseases, International Classification of Functioning, Disability and Health, and International Classification of Health Interventions,were used to establish diagnostic standards and standardized terminology, as well as coding disease diagnosis, functional description, functional assessment, and rehabilitation interventions, to improve the quality of data reporting, and level of quality control in rehabilitation. ConclusionThe structuring and standardization of rehabilitation outpatient medical records are the foundation for sharing of rehabilitation data. The using of the three major classifications of WHO-FICs is valuable for the terminology and coding of disease diagnosis, functional description and assessment, and intervention in rehabilitation outpatient medical records, which is significant for sharing and interconnectivity of rehabilitation outpatient data, as well as for optimizing the quality and safety of rehabilitation medical services.

ObjectiveTo explore the standardization of inpatient rehabilitation medical record summary sheet, encompassing its structure, content and data standards, to enhance the standardization level of inpatient rehabilitation medical record summary sheet, improve data reporting quality, and provide accurate data support for medical insurance payment, hospital performance evaluation, and rehabilitation discipline evaluation. MethodsBased on the relevant specifications of the National Health Commission's Basic Norms for Medical Record Writing, Specifications for Sharing Documents of Electronic Medical Records, and Quality Management and Control Indicators for Inpatient Medical Record Summary Sheet (2016 Edition), this study analyzed the structure and content of the inpatient rehabilitation medical record summary sheet. The study systematically applied the three major reference classifications of the World Health Organization Family of International Classifications, International Classification of Diseases (ICD-10/ICD-11, ICD-9-CM-3), International Classification of Functioning, Disability and Health (ICF), and International Classification of Health Interventions (ICHI Beta-3), for disease diagnosis, functional description and assessment, and rehabilitation intervention, forming a standardized terminology system and coding methods. ResultsThe inpatient rehabilitation medical record summary sheet covered four major sections: inpatient information, hospitalization information, diagnosis and treatment information, and cost information. ICD-10/ICD-11 were the standards and coding tools for admission and discharge diagnoses in the inpatient rehabilitation medical record summary sheet. The three functional assessment tools recommended by ICD-11, the 36-item version of World Health Organization Disability Assessment Schedule 2.0, Brief Model Disability Survey and Generic Functioning domains, as well as ICF, were used for rehabilitation functioning assessment and the coding of outcomes. ICHI Beta-3 and ICD-9-CM-3 were used for coding surgical procedures and operations in the medical record summary sheet, and also for coding rehabilitation intervention items. ConclusionThe inpatient rehabilitation medical record summary sheet is a summary of the relevant content of the rehabilitation medical record and a tool for reporting inpatient rehabilitation data. It needs to be refined and optimized according to the characteristics of rehabilitation, with necessary data supplemented. The application of ICD-11/ICD-10, ICF and ICHI Beta-3/ICD-9-CM-3 classification standards would comprehensively promote the accuracy of inpatient diagnosis of diseases and functions. Based on ICD-11 and ICF, relevant functional assessment result data would be added, and ICHI Beta-3/ICD-9-CM-3 should be used to code rehabilitation interventions. Improving the quality of rehabilitation medical records and inpatient rehabilitation medical record summary sheet is an important part of rehabilitation quality control, and also lays an evidence-based data foundation for the analysis and application of inpatient rehabilitation medical record summary sheet.

Objective:To investigate the long-term outcomes of using 3D-printed preformed titanium meshes in repair and reconstruction of orbital region.Methods:A retrospective analysis was conducted on patients with tumors invading the naso-orbito-maxillary region who underwent surgical resection and repair/reconstruction with 3D-printed preformed titanium meshes. The patients were collected at three medical centers (the Third Affiliated Hospital of Sun Yat-sen University, Xijing Hospital of Air Force Military Medical University, and Shenzhen Longgang District Ear, Nose and Throat Hospital) from 2016 to 2023. Tumor extent was evaluated radiologically, and the surgical approaches, reconstruction outcomes, surgical complications, and long-term follow-up results were analyzed.Results:A total of 46 patients from the three centers were included in this study, comprising 27 males and 19 females, with an average age of 51 years (range: from 13 to 86 years). Among them, 4 patients had benign tumors, while the remaining 42 had malignant tumors. The median follow-up duration was 60.7 months (range: from 19.0 to 75.0 months). Postoperatively, symmetrical globe position was achieved in 38 cases without significant diplopia; 4 cases exhibited enophthalmos without diplopia, and 4 cases had enophthalmos with diplopia. Twelve patients received preoperative radiotherapy, and 30 patients received postoperative radiotherapy. Six patients developed enophthalmos, and 6 experienced titanium mesh exposure after radiotherapy. Following treatment completion, 3 patients underwent repair using frontal flaps, 1 using a superficial temporal artery island flap, and 2 using free flaps. All remaining patients showed no postoperative infections, and their wounds healed normally.Conclusion:The application of 3D-printed preformed titanium mesh enables precise repair of postoperative defects in patients with naso-orbital tumors, facilitating reliable reconstruction of the orbital and facial contours with straightforward operation and dependable outcomes.

Vertebral refracture following percutaneous vertebral augmentation (PVA) is commonly seen in elderly patients with osteoporotic thoracolumbar compression fractures (OTLCF). It can lead to recurrent pain, loss of vertebral height, progression of kyphosis, and even neurological dysfunction, significantly impairing patients′ quality of life. Current diagnosis and treatment face multiple challenges, including high misdiagnosis rate, difficulty in choosing between surgical and non-surgical treatment options, lack of standardized surgical protocols, interference from intralesional bone cement during procedures, inadequate stability of internal fixation in osteoporotic bone, and suboptimal compliance of anti-osteoporotic therapy. Establishing a standardized diagnostic and therapeutic framework is urgently needed. To standardize the management process and improve outcomes for vertebral refractures after PVA in elderly OTLCF patients, Spinal Trauma Group of the Orthopedic Branch of Chinese Medical Doctor Association organized experts in the field to develop Guideline for the diagnosis and treatment of vertebral refracture after percutaneous vertebral augmentation in elderly patients with osteoporotic thoracolumbar compression fractures ( version 2025), based on current literature and clinical experience, and adhering to principles of scientific rigor and clinical applicability. A total of 11 recommendations were proposed, encompassing diagnosis, treatment, and rehabilitation of vertebral refracture after PVA in elderly patients with OTLCF, aiming to provide a foundation for a standardized management.