Hearing loss is the most prevalent disabling disease. Cochlear implantation（CI） serves as the primary intervention for severe to profound hearing loss. This consensus systematically explores the value of genetic diagnosis in the pre-operative assessment and efficacy prognosis for CI. Drawing upon domestic and international research and clinical experience, it proposes an evidence-based medicine three-tiered prognostic classification system（Favorable, Marginal, Poor）. The consensus focuses on common hereditary non-syndromic hearing loss（such as that caused by mutations in genes like GJB2, SLC26A4, OTOF, LOXHD1） and syndromic hereditary hearing loss（such as Jervell & Lange-Nielsen syndrome and Waardenburg syndrome）, which are closely associated with congenital hearing loss, analyzing the impact of their pathological mechanisms on CI outcomes. The consensus provides recommendations based on multiple round of expert discussion and voting. It emphasizes that genetic diagnosis can optimize patient selection, predict prognosis, guide post-operative rehabilitation, offer stratified management strategies for patients with different genotypes, and advance the application of precision medicine in the field of CI.
Humans ; Cochlear Implantation ; Prognosis ; Hearing Loss/surgery* ; Consensus ; Connexin 26 ; Mutation ; Sulfate Transporters ; Connexins/genetics*

Objective: To investigate the effects of autologous platelet-rich plasma (aPRP) collected using a continuous blood cell separator on blood conservation and prognosis in patients with type A aortic dissection. Methods: The clinical data of patients who underwent emergency aortic replacement for acute type A aortic dissection at our hospital from January 2020 to December 2023 were respectively analyzed. Patients were divided into two groups based on whether they received aPRP collection before surgery for subsequent reinfusion: the aPRP group (n=32) and the control group (n=35). The volume of aPRP collected and the platelet concentration in the aPRP were recorded. The volumes of allogeneic blood and blood products transfused, and the associated costs during hospitalization were compared between two groups. Intraoperative blood loss, perioperative laboratory parameter changes, 24-hour postoperative drainage volume, duration of ICU stay and mechanical ventilation, length of hospital stay, and mortality rate of the two groups were also compared. Results: The platelet concentration in aPRP was (491.5±85.4)×10 /L, accounting for (24.1±9.6)% of the patient's total platelet count. The volume of aPRP collected accounted for (23.0±6.3)% of the patient's total plasma volume. Compared with the control group, the aPRP group demonstrated significantly reduced transfusion volumes of allogeneic red blood cells, plasma, and platelets (P<0.05), along with significantly lower blood-related costs during hospitalization (P<0.05). Postoperative coagulation parameters (APTT, PT, INR, and TEG) were significantly improved (P<0.05), and platelet counts were markedly increased (P<0.05) in aPRP group as compared with the control group. No statistically significant differences were observed in postoperative use of prothrombin complex concentrate and fibrinogen between the two groups. Similarly, there were no significant differences in postoperative 24-hour drainage volume, 24-hour extubation rate, ICU length of stay, duration of mechanical ventilation, or total hospital length of stay. The incidence of complications and mortality did not differ significantly between the two groups. Conclusion: The administration of aPRP significantly reduces the requirement for perioperative allogeneic blood transfusion in patients undergoing surgery for type A aortic dissection. Furthermore, it enhances coagulation function and reduces associated transfusion costs, thereby establishing itself as an effective and safe strategy for blood conservation.

In recent years, cancer treatment methods and means are becoming more and more diversified, and single treatment methods often have limited efficacy, while the synergistic effect of immunity combined with chemotherapy can inhibit tumor growth more effectively. Based on this, we constructed a sodium alginate hydrogel composite system loaded with chemotherapeutic agents and tumor vaccines (named SA-DOX-NA) with a view to the combined use of chemotherapeutic agents and tumor vaccines. Firstly, the tumor vaccine (named NA) degradable under acidic conditions was constructed by in situ polymerization using chicken ovalbumin (OVA), acrylamide (AAM) and 2-(dimethylamino) ethyl methacrylate (DMAEMA) monomer. Then a hydrogel composite system SA-DOX-NA co-loaded with chemotherapeutic drug doxorubicin (DOX) and NA was prepared using sodium alginate as a matrix. The results showed that SA-DOX-NA had good in situ gel-forming ability and formed a mesh structure that could realize the co-loading of DOX and NA as well as the slow drug release. The electron microscopy results showed that SA-DOX-NA had good in situ gel-forming ability with good internal connectivity, and the three-dimensional mesh structure could realize the co-loading of DOX and NA as well as the slow drug release. The antitumor and immunomodulatory results showed that SA-DOX-NA both effectively inhibited the growth of tumor cells and efficiently promoted the proliferation and activation of DC2.4 dendritic cells without additional adjuvant. In summary, SA-DOX-NA exerts the dual efficacy of chemotherapy and immunotherapy for tumor treatment, and has a good application prospect in local tumor treatment.

Objective:To investigate the application and clinical efficacy of customized, 3D-printed femoral bone marrow stems in the revision of tumor prostheses.Methods:A retrospective analysis was performed for the data of 11 patients (7 males and 4 females) aged 53.1±11.7 years (range, 38-75 years), who underwent 3D-printed customized revision of femoral intramedullary stems due to loosening of femoral tumor prostheses at the 960th Hospital of the Joint Support Force of the PLA from June 2021 to June 2023. The pathological types of tumors associated with the initial surgeries included 4 cases of giant cell tumor of bone, 5 cases of osteosarcoma, 1 case of chondrosarcoma, and 1 case of plasma cell tumor. The tumor was located at the distal femur in 8 cases and the proximal femur in 3 cases. The procedures included 3 initial revisions, 7 secondary revisions, and 1 tertiary revision. The average limb shortening measured 4.6±2.2 cm (range, 2.5-9.0 cm). Prior to revision, all prostheses were fixed with bone cement, revealing enlargement of the femoral medullary cavity and cortical bone thinning. Among them, 5 cases had intramedullary stems permeabilizing the femoral cortex, and 1 case had femoral cleavage fractures. All 11 patients received personalized data for the design and 3D printing of femoral bone marrow stems.Results:The lengths and diameters of the 3D-printed porous femoral bone marrow stems ranged from 80 to 160 mm and 20 to 22 mm, respectively. Ten patients were fitted with cylindrical intramedullary handles, while one received a conical intramedullary handle. A successful revision with the 3D-printed stems was achieved in 10 patients; however, 1 case failed to accommodate the conical handle and was instead revised with a bone cement prosthesis. During the implantation of the intramedullary stems, three patients experienced minor cortical splitting, which was managed with bundling and fixation during the procedure. Immediate stability was attained for all prostheses during surgery, yet postoperative limb shortening did not undergo significant correction. All patients exhibited normal healing of their postoperative incisions. The visual analog scale for limb pain decreased significantly from 8.0±0.8 points before surgery to 1.0±0.4 points three months postoperatively ( t=25.957, P<0.001). By six months after the surgery, none of the patients reported any limb pain. Follow-up data for all 11 patients indicated an average follow-up duration of 25.2±7.5 months (range, 16-36 months), during which limb function improved satisfactorily. The Musculoskeletal Tumor Society (MSTS) score increased from 7.9±1.4 points preoperatively to 20.9±2.7 points at the last follow-up, with this change also being statistically significant ( t=14.229, P<0.001). Imaging evaluations revealed normal lower limb force lines, no rotation or longitudinal displacement of the prosthetic stem, and successful integration with the femur. Conclusion:Personalized intramedullary stems produced through 3D printing demonstrate significant clinical effectiveness in femoral tumor prosthesis revision surgery, making them a viable option for such procedures.

OBJECTIVES: This study aims to investigate factors influencing dental arch development in patients aged 0-6 years with cleft palate after Sommerlad-Furlow (SF) palatoplasty. METHODS: A total of 183 patients who underwent primary SF repair for cleft lip and palate before 18 months of age were included. Follow-ups were conducted at different ages, and digital dental casts of the maxillary dental arch were obtained using 3-matic Research 12.0 software. The length and width of the dental arch and palate were measured to explore developmental changes in the maxillary dental arch of the patients after the procedure. The study also investigated the influence of gender, age, cleft palate type, and relaxation incision on maxillary dental arch development. RESULTS: After SF, maxillary dental arch measurements showed statistically significant differences between children aged 0-2 years and those aged 3-6 years (P<0.05). However, no statistically significant differences were observed among different age groups within the 3-6 years range. Statistically significant differences were detected between males and females, with males having greater width of the posterior dental arch and palate (P=0.001) and shorter length of the anterior dental arch and entire dental arch (P<0.05). The unilateral cleft lip and palate group had shorter dental arch length (P<0.01) and wider posterior palate (P<0.01) than the cleft palate only group. Maxillary dental arch measurements had no statistically significant differences between groups with or without a relaxing incision. CONCLUSIONS Gender and age influence the width of the maxillary dental arch in children aged 0-6 years after SF, while age and cleft palate type affect dental arch length.
Humans ; Child, Preschool ; Male ; Cleft Palate/surgery* ; Female ; Child ; Infant ; Dental Arch/growth & development* ; Maxilla/growth & development* ; Cleft Lip/surgery* ; Age Factors ; Sex Factors ; Palate/surgery* ; Infant, Newborn

Aim To investigate the antidepressant mechanism of hyperforin via the utilization of single-cell sequencing technology.Methods C57BL/6 mice were randomly divided into the control group,depres-sion model group,and hyperforin intervention group.The chronic unpredictable mild stress(CUMS)model was induced and drug interventions were administered for 28 d.Behavioral experiments were conducted to as-sess depressive symptoms,and hippocampal tissue was collected for single-cell RNA sequencing.Key cell populations and differentially expressed genes across groups were identified,followed by PPI network,GO,and KEGG enrichment analysis.Results Behavioral experiments indicated that CUMS successfully induced depressive symptoms in mice,while hyperforin im-proved depressive behavior.In the depression model group,the proportion of brain perivascular macrophages(PVM)increased,and this proportion decreased after hyperforin intervention,approaching the level seen in the control group.The top 20 common differentially ex-pressed genes in the PVM subpopulation were Saa3,Hbb-bs and Ccl24.PPI network analysis identified core targets,including Ccl2,Dhx9,C3,Msr1,Cxcl2 and Cx3cr1.KEGG enrichment analysis revealed pathways related to chemokines,phagosome formation,and inosi-tol phosphate metabolism.Conclusion The antide-pressant mechanism of hyperforin may be related to the regulation of Ccl24 and its related chemokine signaling pathway by PVM.

Objective:To investigate the application and clinical efficacy of customized, 3D-printed femoral bone marrow stems in the revision of tumor prostheses.Methods:A retrospective analysis was performed for the data of 11 patients (7 males and 4 females) aged 53.1±11.7 years (range, 38-75 years), who underwent 3D-printed customized revision of femoral intramedullary stems due to loosening of femoral tumor prostheses at the 960th Hospital of the Joint Support Force of the PLA from June 2021 to June 2023. The pathological types of tumors associated with the initial surgeries included 4 cases of giant cell tumor of bone, 5 cases of osteosarcoma, 1 case of chondrosarcoma, and 1 case of plasma cell tumor. The tumor was located at the distal femur in 8 cases and the proximal femur in 3 cases. The procedures included 3 initial revisions, 7 secondary revisions, and 1 tertiary revision. The average limb shortening measured 4.6±2.2 cm (range, 2.5-9.0 cm). Prior to revision, all prostheses were fixed with bone cement, revealing enlargement of the femoral medullary cavity and cortical bone thinning. Among them, 5 cases had intramedullary stems permeabilizing the femoral cortex, and 1 case had femoral cleavage fractures. All 11 patients received personalized data for the design and 3D printing of femoral bone marrow stems.Results:The lengths and diameters of the 3D-printed porous femoral bone marrow stems ranged from 80 to 160 mm and 20 to 22 mm, respectively. Ten patients were fitted with cylindrical intramedullary handles, while one received a conical intramedullary handle. A successful revision with the 3D-printed stems was achieved in 10 patients; however, 1 case failed to accommodate the conical handle and was instead revised with a bone cement prosthesis. During the implantation of the intramedullary stems, three patients experienced minor cortical splitting, which was managed with bundling and fixation during the procedure. Immediate stability was attained for all prostheses during surgery, yet postoperative limb shortening did not undergo significant correction. All patients exhibited normal healing of their postoperative incisions. The visual analog scale for limb pain decreased significantly from 8.0±0.8 points before surgery to 1.0±0.4 points three months postoperatively ( t=25.957, P<0.001). By six months after the surgery, none of the patients reported any limb pain. Follow-up data for all 11 patients indicated an average follow-up duration of 25.2±7.5 months (range, 16-36 months), during which limb function improved satisfactorily. The Musculoskeletal Tumor Society (MSTS) score increased from 7.9±1.4 points preoperatively to 20.9±2.7 points at the last follow-up, with this change also being statistically significant ( t=14.229, P<0.001). Imaging evaluations revealed normal lower limb force lines, no rotation or longitudinal displacement of the prosthetic stem, and successful integration with the femur. Conclusion:Personalized intramedullary stems produced through 3D printing demonstrate significant clinical effectiveness in femoral tumor prosthesis revision surgery, making them a viable option for such procedures.

Aim To investigate the antidepressant mechanism of hyperforin via the utilization of single-cell sequencing technology.Methods C57BL/6 mice were randomly divided into the control group,depres-sion model group,and hyperforin intervention group.The chronic unpredictable mild stress(CUMS)model was induced and drug interventions were administered for 28 d.Behavioral experiments were conducted to as-sess depressive symptoms,and hippocampal tissue was collected for single-cell RNA sequencing.Key cell populations and differentially expressed genes across groups were identified,followed by PPI network,GO,and KEGG enrichment analysis.Results Behavioral experiments indicated that CUMS successfully induced depressive symptoms in mice,while hyperforin im-proved depressive behavior.In the depression model group,the proportion of brain perivascular macrophages(PVM)increased,and this proportion decreased after hyperforin intervention,approaching the level seen in the control group.The top 20 common differentially ex-pressed genes in the PVM subpopulation were Saa3,Hbb-bs and Ccl24.PPI network analysis identified core targets,including Ccl2,Dhx9,C3,Msr1,Cxcl2 and Cx3cr1.KEGG enrichment analysis revealed pathways related to chemokines,phagosome formation,and inosi-tol phosphate metabolism.Conclusion The antide-pressant mechanism of hyperforin may be related to the regulation of Ccl24 and its related chemokine signaling pathway by PVM.

Objective To investigate the toxicokinetic differences of 3,4-methylenedioxy-N-methylamphetamine(MDMA)and its metabolite 4,5-methylene dioxy amphetamine(MDA)in rats af-ter single and continuous administration of MDMA,providing reference data for the forensic identifica-tion of MDMA.Methods A total of 24 rats in the single administration group were randomly divided into 5,10 and 20 mg/kg experimental groups and the control group,with 6 rats in each group.The ex-perimental group was given intraperitoneal injection of MDMA,and the control group was given intraperi-toneal injection of the same volume of normal saline as the experimental group.The amount of 0.5 mL blood was collected from the medial canthus 5 min,30 min,1 h,1.5 h,2 h,4 h,6 h,8 h,10 h,12 h after administration.In the continuous administration group,24 rats were randomly divided into the experi-mental group(18 rats)and the control group(6 rats).The experimental group was given MDMA 7 d by continuous intraperitoneal injection in increments of 5,7,9,11,13,15,17 mg/kg per day,respectively,while the control group was given the same volume of normal saline as the experimental group by in-traperitoneal injection.On the eighth day,the experimental rats were randomly divided into 5,10 and 20 mg/kg dose groups,with 6 rats in each group.MDMA was injected intraperitoneally,and the con-trol group was injected intraperitoneally with the same volume of normal saline as the experimental group.On the eighth day,0.5 mL of blood was taken from the medial canthus 5 min,30 min,1 h,1.5 h,2 h,4 h,6 h,8 h,10 h,12 h after administration.Liquid chromatography-triple quadrupole tandem mass spectrometry was used to detect MDMA and MDA levels,and statistical software was employed for data analysis.Results In the single-administration group,peak concentrations of MDMA and MDA were reached at 5 min and 1 h after administration,respectively,with the largest detection time limit of 12 h.In the continuous administration group,peak concentrations were reached at 30 min and 1.5 h af-ter administration,respectively,with the largest detection time limit of 10 h.Nonlinear fitting equations for the concentration ratio of MDMA and MDA in plasma and administration time in the single-administration group and continuous administration group were as follows:T=10.362C-1.183,R2=0.974 6;T=7.397 3C-0.694,R2=0.961 5(T:injection time;C:concentration ratio of MDMA to MDA in plasma).Conclusions The toxicokinetic data of MDMA and its metabolite MDA in rats,obtained through single and continuous administration,including peak concentration,peak time,detection time limit,and the relationship between concentration ratio and administration time,provide a theoretical and data foundation for relevant forensic identification.