Objective To explore the polymorphism of tyrosinase (TYR) and melanocortin 1 receptor (MC1R) genes and their mRNA expression levels in relation to coat-color phenotypes in guinea pigs, providing genetic markers for locating dominant traits in guinea pigs. Methods A total of 57 self-bred ordinary-level guinea pigs were selected and divided into three groups based on coat color: white (n=22), variegated (n=22) and black (n=13). The guinea pigs were euthanized with an overdose of pentobarbital sodium via intraperitoneal injection. DNA was then extracted from the dorsal skin tissue. Polymorphism in the coding sequence (CDS) of the exons of the TYR and MC1R genes in each group was detected by cloning and sequencing. The mRNA expression of the two genes in skin tissues was detected by real-time fluorescent quantitative PCR to investigate the relationship between these genes and guinea pig coat color. Results A single nucleotide polymorphism (SNP) site was found in the CDS region of TYR exon Ⅰ, where the base A was replaced by G. All white guinea pigs had the G/G genotype for TYR, while no deep-colored (variegated and black) guinea pigs exhibited the G/G genotype for TYR. Most deep-colored guinea pigs had the A/A genotype, and a few had A/G genotype. The A/A genotype frequency in black guinea pigs was higher than in variegated guinea pigs. A 2 760 bp sequence deletion was identified in the exon of the MC1R gene, marked as the - gene, with non-deleted samples marked as N gene. Most white guinea pigs had the -/- genotype for MC1R, variegated guinea pigs mainly had the -/N genotype, and black guinea pigs mainly had the N/N genotype, with a few showing the -/N. The TYR gene expression level was higher in white guinea pigs, lower in variegated guinea pigs, and intermediate in black guinea pigs, but there was no significant difference among the three groups (P>0.05). The MC1R gene expression level in white guinea pigs was extremely low, while both variegated and black guinea pigs showed significantly higher levels than white guinea pigs (P<0.01). Black guinea pigs showed significantly higher levels than variegated guinea pigs (P<0.05). ConclusionThe TYR and MC1R genes synergistically regulate coat color of guinea pigs. The G-site mutation in the TYR gene may lead to albinism, and the change of N-site in the MC1R gene affects the depth of the coat color.

Objective To investigate the epidemiological characteristics of dengue fever in Shenzhen City in 2024, so as to provide insights into formulation of the preventive and control measures for dengue fever. Methods The epidemiological data of dengue cases reported in Shenzhen City in 2024 were extracted from the China Disease Prevention and Control Information System and field epidemiological survey data of dengue fever in Shenzhen City, and the temporal, regional and population distributions of dengue fever cases, source of acquire dengue virus infections, disease diagnosis and treatment and outbreaks were analyzed. The dengue virus nucleic acid was tested and the serotypes of dengue virus were characterized using real-time quantitative reverse transcription PCR (RT-qPCR) assay, and the dengue virus gene was sequenced using next-generation sequencing (NGS). In addition, the surveillance on the density of Aedes albopictus was performed using Breteau index (BI) and mosquito oviposition index (MOI). Results A total of 1 735 dengue fever cases were reported in Shenzhen City in 2024, including 952 local cases and 783 imported cases. Most imported dengue fever cases acquired infections from eight cities of Foshan, Guangzhou, Zhongshan, Jiangmen, Dongguan, Zhaoqing, Huizhou, and Zhuhai in the Pearl River Delta region (664 cases, 84.8% of total imported cases) into Baoan, Longgang, and Nanshan districts. The epidemic exhibited an early onset and rapid progression, peaking during the period between September and November (1 632 cases, 94.1% of total cases), and dengue fever cases were distributed across 73 subdistricts in 10 districts, with most cases reported in densely populated central and western regions. The dengue fever cases had a male-to-female ratio of 1.9∶1.0, and a median age of 37 (21) years, with a higher median age among local cases than among imported cases [40 (20) years vs. 33(15) years; Z = -10.30, P < 0.05]. Housework, unemployment, workers, and business service were predominant occupations (1 405 cases, 81.0% of total cases), and there was a significant difference in the constituent ratio of occupations between local and imported cases (χ² = 92.30, P < 0.05). Among the 1 735 dengue fever cases, the median duration from onset to definitive diagnosis was 3.3 (2.9) days, and 1 686 cases (97.2%) were identified in healthcare facilities, with a low rate of hospitalization and isolation seen in 1 701 inpatients with available epidemiological data (485 cases, 28.5% of total inpatients). A total of 29 outbreaks of dengue fever occurred in Shenzhen City across 2024, which primarily in construction sites (27 outbreaks, 93.1% of total). Dengue virus type I was the dominant serotype causing dengue fever in Shenzhen City in 2024. Sequencing showed that the genomes of dengue virus from multiple dengue fever cases in Shenzhen City shared a high sequence homology with those from cities neighboring Shenzhen City, and there might be intra-city transmission of dengue virus among multiple construction sites in Shenzhen City. The Aedes albopictus density was significantly higher in Shenzhen City in 2024 than in 2023, peaking from May to September. The annual MOI values ranged from 0.9 to 14.0, and the BI values ranged from 0.6 to 6.0. Conclusions The overall epidemic of dengue fever was severe in Shenzhen City in 2024, which was greatly affected by case importation from neighboring cities, construction sites-centered local transmission, and the effectives of routine mosquito vector control was not satisfactory. Integrated dengue fever control measures should be implemented, focusing on regional joint prevention and control mechanisms, capacity building for mosquito vector control, addressing challenges in epidemic containment at construction sites, and strengthening case detection and management systems.

In this paper, near-infrared spectroscopy(NIRS) was employed to analyze 129 batches of commercial products of Reduning Injection. The batch reporting rate was estimated according to the report of Reduning Injection in the direct adverse drug reaction(ADR) reporting system of the drug marketing authorization holder of the Center for Drug Reevaluation of the National Medical Products Administration(National Center for ADR Monitoring) from August 2021 to August 2022. According to the batch reporting rate, the samples of Reduning Injection were classified into those with potential risks and those being safe. No processing, random oversampling(ROS), random undersampling(RUS), and synthetic minority over-sampling technique(SMOTE) were then employed to balance the unbalanced data. After the samples were classified according to appropriate sampling methods, competitive adaptive reweighted sampling(CARS), successive projections algorithm(SPA), uninformative variables elimination(UVE), and genetic algorithm(GA) were respectively adopted to screen the features of spectral data. Then, support vector machine(SVM), logistic regression(LR), k-nearest neighbors(KNN), naive bayes(NB), random forest(RF), and artificial neural network(ANN) were adopted to establish the risk prediction models. The effects of the four feature extraction methods on the accuracy of the models were compared. The optimal method was selected, and bayesian optimization was performned to optimize the model parameters to improve the accuracy and robustness of model prediction. To explore the correlations between potential risks of clinical use and quality test data, TreeNet was employed to identify potential quality parameters affecting the clinical safety of Reduning Injection. The results showed that the models established with the SVM, LR, KNN, NB, RF, and ANN algorithms had the F1 scores of 0.85, 0.85, 0.86, 0.80, 0.88, and 0.85 and the accuracy of 88%, 88%, 88%, 85%, 91%, and 88%, respectively, and the prediction time was less than 5 s. The results indicated that the established models were accurate and efficient. Therefore, near infrared spectroscopy combined with machine learning algorithms can quickly predict the potential risks of clinical use of Reduning Injection in batches. Three key quality parameters that may affect clinical safety were identified by TreeNet, which provided a scientific basis for improving the safety standards of Reduning Injection.
Spectroscopy, Near-Infrared/methods* ; Drugs, Chinese Herbal/administration & dosage* ; Machine Learning ; Algorithms ; Humans ; Quality Control

This study aimed to explore the effects and mechanisms of total extracts from Anthriscus sylvestris on pulmonary hypertension in rats. Sixty male SD rats were divided into normal(NC) group, model(M) group, positive drug sildenafil(Y) group, low-dose A. sylvestris(ES-L) group, medium-dose A. sylvestris(ES-M) group, and high-dose A. sylvestris(ES-H) group. On day 1, rats were intraperitoneally injected with monocrotaline(60 mg·kg~(-1)) to induce pulmonary hypertension, and the rat model was established on day 28. From days 15 to 28, intragastric administration of the respective treatments was performed. After modeling and treatment, small animal echocardiography was used to detect the right heart function of the rats. Arterial blood gas was measured using a blood gas analyzer. Hematoxylin and eosin(HE) staining and Masson staining were performed to observe cardiopulmonary pathological damage. Flow cytometry was used to detect apoptosis in the lung and myocardial tissues and reactive oxygen species(ROS) levels. Western blot was applied to detect the expression levels of transforming growth factor-β1(TGF-β1), phosphorylated mothers against decapentaplegic homolog 3(p-Smad3), Smad3, tissue plasminogen activator(t-PA), and plasminogen activator inhibitor-1(PAI-1) in lung tissue. A blood routine analyzer was used to measure inflammatory immune cell levels in the blood. Enzyme-linked immunosorbent assay(ELISA) was used to detect the expression levels of P-selectin and thromboxane A2(TXA2) in plasma. The results showed that, compared with the NC group, right heart hypertrophy index, right ventricular free wall thickness, right heart internal diameter, partial carbon dioxide pressure(PaCO_2), apoptosis in cardiopulmonary tissue, and ROS levels were significantly increased in the M group. In contrast, the ratio of pulmonary blood flow acceleration time(PAT)/ejection time(PET), right cardiac output, change rate of right ventricular systolic area, systolic displacement of the tricuspid ring, oxygen partial pressure(PaO_2), and blood oxygen saturation(SaO_2) were significantly decreased in the M group. After administration of the total extract of A. sylvestris, right heart function and blood gas levels were significantly improved, while apoptosis in cardiopulmonary tissue and ROS levels significantly decreased. Further testing revealed that the total extract of A. sylvestris significantly decreased the levels of interleukin-1β(IL-1β), interleukin-6(IL-6), and PAI-1 proteins in lung tissue, while increasing the expression of t-PA. Additionally, the extract reduced the levels of inflammatory cells such as leukocytes, lymphocytes, granulocytes, and monocytes in the blood, as well as the levels of P-selectin and TXA2 in plasma. Metabolomics results showed that the total extract of A. sylvestris significantly affected metabolic pathways, including arginine biosynthesis, tyrosine metabolism, and taurine and hypotaurine metabolism. In conclusion, the total extract of A. sylvestris may exert an anti-pulmonary hypertension effect by inhibiting the TGF-β1/Smad3 signaling pathway, thereby alleviating immune-inflammatory responses and thrombosis.
Animals ; Male ; Smad3 Protein/metabolism* ; Transforming Growth Factor beta1/metabolism* ; Rats, Sprague-Dawley ; Rats ; Signal Transduction/drug effects* ; Hypertension, Pulmonary/genetics* ; Thrombosis/immunology* ; Drugs, Chinese Herbal/administration & dosage* ; Humans ; Apoptosis/drug effects*

Microbial detection and control of traditional Chinese medicine(TCM) decoction pieces are crucial for the quality control of TCM preparations. It is also a key area of research in the measurement technology and equipment development for TCM manufacturing. Guided by TCM manufacturing measurement methodologies, this study presented a design of a novel portable microbial detection device, using Atractylodis Macrocephalae Rhizoma decoction pieces as a demonstration. Immunomagnetic separation technology was employed for specific isolation and labeling of target microorganisms. Enzymatic signal amplification was utilized to convert weak biological signals into colorimetric signals, constructing an optical biosensor. A self-developed smartphone APP was further applied to analyze the colorimetric signals and quantify target concentrations. A portable and automated detection system based on Arduino microcontroller was developed to automatically perform target microbial separation/extraction, as well as mimetic enzyme labeling and catalytic reactions. The developed equipment specifically focuses on the rapid and quantitative microbial analysis of TCM active pharmaceutical ingredients, intermediates in TCM manufacturing, and final TCM products. Experimental results demonstrate that the equipment could detect Salmonella in samples within 2 h, with a detection limit as low as 5.1 × 10~3 CFU·mL~(-1). The equipment enables the rapid detection of microorganisms in TCM decoction pieces, providing a potential technical solution for on-site rapid screening of microbial contamination indicators in TCM. It has broad application prospects in measurement technology for TCM manufacturing and offers strong technical support for the modernization, industrialization, and intelligent development of TCM.
Drugs, Chinese Herbal/analysis* ; Atractylodes/microbiology* ; Rhizome/microbiology* ; Biosensing Techniques/methods* ; Medicine, Chinese Traditional ; Colorimetry/instrumentation* ; Quality Control

OBJECTIVE: To observe the clinical efficacy and safety of automatic pressure-controlled pressure cupping in patients with lumbar disc herniation, and compare it with traditional cupping. METHODS: A total of 100 patients diagnosed with lumbar disc herniation from January 2022 to August 2024 were selected and divided into two groups:the automatic pressure-controlled pressure cupping group (controlled pressure cupping group) and the traditional cupping group (control group), 50 cases in each group. In the controlled pressure cupping group, there were 18 males and 32 females, with an age of (51.98±12.69) years;in the control group, there were 16 males and 34 females, with an age of (51.32±12.05) years. The visual analogue scale(VAS), comfort score, and lumbar range of motion were observed before treatment and after the 1st, 3rd, and 7th treatments to evaluate the efficacy and safety. RESULTS: All patients completed the treatment intervention, with complete follow-up data collected. No adverse reactions or complications occurred during treatment and follow-up. After the 3rd treatment, the VAS score of the controlled pressure cupping group was (2.38±0.49), which was lower than that of the control group (2.94±0.68), with a statistically significant difference (P<0.001). In the controlled pressure cupping group, the VAS scores after the 1st, 3rd, and 7th treatments were significantly better than those before treatment (P=0.026);in the control group, the VAS scores after the 3rd and 7th treatments were better than those before treatment, but the difference was not statistically significant(P=0.182). Repeated-measures analysis of variance (ANOVA) on VAS scores at different time points in both groups showed that there were statistically significant differences in inter-group, time, and interaction effects (P<0.05). After the 1st treatment, in the controlled pressure cupping group, 0 patients felt comfortable, 42 patients (84%) felt mild discomfort, and 8 patients (16%) felt moderate discomfort;in the control group, 0 patients felt comfortable, 28 patients (56%) felt mild discomfort, and 22 patients(44%) felt moderate discomfort;the difference between the two groups was statistically significant(P=0.005). After the 3rd treatment, in the controlled pressure cupping group, 30 patients(60%) felt comfortable, 20 patients (40%) felt mild discomfort, and 0 patients felt moderate discomfort; in the control group, 9 patients (18%) felt comfortable, 41 patients (82%) felt mild discomfort, and 0 patients felt moderate discomfort;the difference between the two groups was statistically significant(P<0.001). There was no statistically significant difference in comfort between the two groups after the 7th treatment(P>0.001). There was no statistically significant difference in lumbar range of motion between the two groups before and after treatment(P>0.05);compared with before treatment, the lumbar range of motion of both groups after treatment was significantly improved, with statistically significant differences (P<0.001). CONCLUSION Automatic pressure-controlled pressure cupping can effectively relieve symptoms in patients with lumbar disc herniation, with excellent safety.
Humans ; Female ; Male ; Intervertebral Disc Displacement/physiopathology* ; Middle Aged ; Adult ; Lumbar Vertebrae/physiopathology* ; Cupping Therapy/methods* ; Pressure ; Aged ; Treatment Outcome

PURPOSE: To methodically assess the effectiveness of augmentative plating (AP) and exchange nailing (EN) in managing nonunion following intramedullary nailing for long bone fractures of the lower extremity. METHODS: PubMed, EMBASE, Web of Science, and the Cochrane Library were searched to gather clinical studies regarding the use of AP and EN techniques in the treatment of nonunion following intramedullary nailing of lower extremity long bones. The search was conducted up until May 2023. The original studies underwent an independent assessment of their quality, a process conducted utilizing the Newcastle-Ottawa scale. Data were retrieved from these studies, and meta-analysis was executed utilizing Review Manager 5.3. RESULTS: This meta-analysis included 8 studies involving 661 participants, with 305 in the AP group and 356 in the EN group. The results of the meta-analysis demonstrated that the AP group exhibited a higher rate of union (odds ratio: 8.61, 95% confidence intervals (CI): 4.12 - 17.99, p < 0.001), shorter union time (standardized mean difference (SMD): -1.08, 95% CI: -1.79 - -0.37, p = 0.003), reduced duration of the surgical procedure (SMD: -0.56, 95% CI: -0.93 - -0.19, p = 0.003), less bleeding (SMD: -1.5, 95% CI: -2.81 - -0.18, p = 0.03), and a lower incidence of complications (relative risk: -0.17, 95% CI: -0.27 - -0.06, p = 0.001). In the subgroup analysis, the time for union in the AP group in nonisthmal and isthmal nonunion of lower extremity long bones was shorter compared to the EN group (nonisthmal SMD: -1.94, 95% CI: -3.28 - -0.61, p < 0.001; isthmal SMD: -1.08, 95% CI: -1.64 - -0.52, p = 0.002). CONCLUSION In the treatment of nonunion in diaphyseal fractures of the long bones in the lower extremity, the AP approach is superior to EN, both intraoperatively (with reduced duration of the surgical procedure and diminished blood loss) and postoperatively (with an elevated union rate, shorter union time, and lower incidence of complications). Specifically, in the management of nonunion of lower extremity long bones with non-isthmal and isthmal intramedullary nails, AP demonstrated shorter union time in comparison to EN.
Humans ; Bone Nails/adverse effects* ; Bone Plates/adverse effects* ; Femoral Fractures/surgery* ; Fracture Fixation, Intramedullary/methods* ; Fractures, Ununited/surgery* ; Lower Extremity/injuries*

PURPOSE: To judge the injury mode and injury severity of the real human body through the measured values of anthropomorphic test devices (ATD) injury indices, the mapping relationship of lumbar injury between ATD and human body model (HBM) was explored. METHODS: Through the ATD model and HBM simulation, the mapping relationship of lumbar injury between the 2 subjects was explored. The sled environment consisted of a semi-rigid seat with an adjustable seatback angle and a 3-point seat belt system with a seatback-mounted D-ring. Three seatback recline states of 25°, 45°, and 65° were designed, and the seat pan angle was maintained at 15°. A 23 g, 47 km/h pulse was used. The validity of the finite element model of the sled was verified by the comparison of ATD simulation and test results. ATD model was the test device for human occupant restraint for autonomous vehicles (THOR-AV) dummy model and HBM was the total human model for safety (THUMS) v6.1. The posture of the 2 models was adjusted to adapt to the 3 seat states. The lumbar response of THOR-AV and the mechanical and biomechanical data on L1 - L5 vertebrae of THUMS were output, and the response relationship between THOR-AV and THUMS was descriptive statistically analyzed. RESULTS: Both THOR-AV and THUMS were submarined in the 65° seatback angle case. With the change of seatback angle, the lumbar spine axial compression force (F_z) of THOR-AV and THUMS changed in the similar trend. The maximum F_z ratio of THOR-AV to THUMS at 25° and 45° seatback angle cases were 1.6 and 1.7. The flexion moment (M_y) and the time when the maximum M_y occurred in the 2 subjects were very different. In particular, the form of moment experienced by the L1 - L5 vertebrae of THUMS also changed. The changing trend of M_y measured by THOR-AV over time can reflect the changing trend of maximum stress of L1 and L2 of THUMS. CONCLUSION The F_z of ATD and HBM presents a certain proportional relationship, and there is a mapping relationship between the 2 subjects on F_z. The mapping function can be further clarified by applying more pulses and adopting more seatback angles. It is difficult to map M_y directly because they are very different in ATD and HBM. The M_y of ATD and stress of HBM lumbar showed a similar change trend over time, and there may be a hidden mapping relationship.
Humans ; Lumbar Vertebrae/injuries* ; Finite Element Analysis ; Biomechanical Phenomena ; Manikins ; Spinal Injuries/physiopathology*

BACKGROUND: Based on the China-VHD database, this study sought to develop and validate a Valvular Heart Disease- specific Age-adjusted Comorbidity Index (VHD-ACI) for predicting mortality risk in patients with VHD. METHODS & RESULTS: The China-VHD study was a nationwide, multi-centre multi-centre cohort study enrolling 13,917 patients with moderate or severe VHD across 46 medical centres in China between April-June 2018. After excluding cases with missing key variables, 11,459 patients were retained for final analysis. The primary endpoint was 2-year all-cause mortality, with 941 deaths (10.0%) observed during follow-up. The VHD-ACI was derived after identifying 13 independent mortality predictors: cardiomyopathy, myocardial infarction, chronic obstructive pulmonary disease, pulmonary artery hypertension, low body weight, anaemia, hypoalbuminaemia, renal insufficiency, moderate/severe hepatic dysfunction, heart failure, cancer, NYHA functional class and age. The index exhibited good discrimination (AUC, 0.79) and calibration (Brier score, 0.062) in the total cohort, outperforming both EuroSCORE II and ACCI (P < 0.001 for comparison). Internal validation through 100 bootstrap iterations yielded a C statistic of 0.694 (95% CI: 0.665-0.723) for 2-year mortality prediction. VHD-ACI scores, as a continuous variable (VHD-ACI score: adjusted HR (95% CI): 1.263 (1.245-1.282), P < 0.001) or categorized using thresholds determined by the Yoden index (VHD-ACI ≥ 9 vs. < 9, adjusted HR (95% CI): 6.216 (5.378-7.184), P < 0.001), were independently associated with mortality. The prognostic performance remained consistent across all VHD subtypes (aortic stenosis, aortic regurgitation, mitral stenosis, mitral regurgitation, tricuspid valve disease, mixed aortic/mitral valve disease and multiple VHD), and clinical subgroups stratified by therapeutic strategy, LVEF status (preserved vs. reduced), disease severity and etiology. CONCLUSION The VHD-ACI is a simple 13-comorbidity algorithm for the prediction of mortality in VHD patients and providing a simple and rapid tool for risk stratification.

This consensus will introduce the characteristics of fillers used in the surgical cavities of domestic nasal surgery patients based on relevant literature and expert opinions. It will also provide recommendations for the selection of cavity fillers for different nasal diseases, with chronic sinusitis as a representative example.
Humans ; Nasal Cavity/surgery* ; Nasal Surgical Procedures ; China ; Consensus ; Sinusitis/surgery* ; Dermal Fillers