ObjectivePancreatic ductal adenocarcinoma (PDAC) exhibits a limited response to current treatments due to its dense fibrotic stroma and highly immunosuppressive tumor microenvironment. In recent years, advancements in cellular immunotherapy, particularly chimeric antigen receptor macrophage (CAR-M) therapy, have offered new hope for pancreatic cancer treatment. Although CAR-M therapy demonstrates dual potential in directly killing tumor cells and remodeling the immune microenvironment, it still faces challenges such as complex in vitro preparation processes and low in vivo targeting and delivery efficiency. Therefore, developing strategies for efficient and targeted in vivo delivery of CAR genes has become crucial for overcoming current therapeutic limitations. This study aims to develop an orally administrable nano-gene delivery system for the targeted delivery of CAR genes to pancreatic tumor sites. MethodsCore nano-gene particles (PNP/pCAR) were constructed by loading plasmid DNA encoding CAR (pCAR) with cationic polypeptides (PNP). Subsequently, PNP/pCAR was surface-modified with β-glucan to prepare the targeted nanoparticles (βGlus-PNP/pCAR). The loading efficiency of PNP for pCAR was quantitatively assessed by gel retardation assay. The particle size, Zeta potential, morphology, and storage stability of PNP/pCAR were characterized using a Malvern particle size analyzer and transmission electron microscopy. At the cellular level, RAW 264.7 macrophages were selected. The cytotoxicity of PNP/pCAR was evaluated using the CCK-8 assay. The cellular uptake efficiency and lysosomal escape ability of the nanoparticles were assessed via flow cytometry and confocal microscopy. Transfection efficiency was quantitatively evaluated by detecting the expression of the reporter gene GFP using flow cytometry. At the in vivo level, an orthotopic pancreatic cancer mouse model was established. Cy7-labeled βGlus-PNP/pCAR nanoparticles were administered orally, and the fluorescence distribution in mice was dynamically monitored at 1, 2, 4, 8, and 16 h post-administration using a small animal in vivo imaging system. Forty-eight hours after oral gavage, the mice were euthanized, and pancreatic tumor tissues were collected for further analysis of intratumoral fluorescence signals using the imaging system. Additionally, βGlus-PNP/pCAR-GFP nanoparticles loaded with the reporter gene (GFP) were administered orally. Forty-eight hours post-administration, pancreatic tumor tissues were harvested to prepare frozen sections, and GFP expression was observed and analyzed under a fluorescence microscope. ResultsThe PNP carrier exhibited a high loading capacity for pCAR. The successfully prepared PNP/pCAR nanoparticles were regular spheres with a hydrodynamic diameter of approximately (120±10) nm and a Zeta potential of about +(6±1) mV. They maintained good structural stability after incubation in PBS buffer for 7 d. Cell experiments demonstrated that PNP/pCAR exhibited no significant cytotoxicity in RAW 264.7 cells while being efficiently internalized and effectively escaping lysosomal degradation. The transfection positive rate of PNP/pCAR-GFP in RAW 264.7 cells reached (25±3)%, surpassing that of Lipofectamine 2000-loaded pCAR-GFP (Lipo/pCAR-GFP), which was (20±1)%.In vivo experiments revealed that, compared to unmodified PNP/pCAR, βGlus-PNP/pCAR exhibited strongerin situ pancreatic tumor targeting ability after oral administration. Furthermore, oral administration of βGlus-PNP/pCAR-GFP resulted in significant GFP protein expression detectable within pancreatic tumor tissues. ConclusionThis study successfully constructed and validated an orally administrable, pancreatic cancer-targeting polypeptide-based nano-gene delivery system. It provides an important technological foundation in delivery systems and experimental basis for the subsequent development of in situ CAR-M-based therapeutic strategies for pancreatic cancer.

ObjectivePancreatic ductal adenocarcinoma (PDAC) exhibits a limited response to current treatments due to its dense fibrotic stroma and highly immunosuppressive tumor microenvironment. In recent years, advancements in cellular immunotherapy, particularly chimeric antigen receptor macrophage (CAR-M) therapy, have offered new hope for pancreatic cancer treatment. Although CAR-M therapy demonstrates dual potential in directly killing tumor cells and remodeling the immune microenvironment, it still faces challenges such as complex in vitro preparation processes and low in vivo targeting and delivery efficiency. Therefore, developing strategies for efficient and targeted in vivo delivery of CAR genes has become crucial for overcoming current therapeutic limitations. This study aims to develop an orally administrable nano-gene delivery system for the targeted delivery of CAR genes to pancreatic tumor sites. MethodsCore nano-gene particles (PNP/pCAR) were constructed by loading plasmid DNA encoding CAR (pCAR) with cationic polypeptides (PNP). Subsequently, PNP/pCAR was surface-modified with β-glucan to prepare the targeted nanoparticles (βGlus-PNP/pCAR). The loading efficiency of PNP for pCAR was quantitatively assessed by gel retardation assay. The particle size, Zeta potential, morphology, and storage stability of PNP/pCAR were characterized using a Malvern particle size analyzer and transmission electron microscopy. At the cellular level, RAW 264.7 macrophages were selected. The cytotoxicity of PNP/pCAR was evaluated using the CCK-8 assay. The cellular uptake efficiency and lysosomal escape ability of the nanoparticles were assessed via flow cytometry and confocal microscopy. Transfection efficiency was quantitatively evaluated by detecting the expression of the reporter gene GFP using flow cytometry. At the in vivo level, an orthotopic pancreatic cancer mouse model was established. Cy7-labeled βGlus-PNP/pCAR nanoparticles were administered orally, and the fluorescence distribution in mice was dynamically monitored at 1, 2, 4, 8, and 16 h post-administration using a small animal in vivo imaging system. Forty-eight hours after oral gavage, the mice were euthanized, and pancreatic tumor tissues were collected for further analysis of intratumoral fluorescence signals using the imaging system. Additionally, βGlus-PNP/pCAR-GFP nanoparticles loaded with the reporter gene (GFP) were administered orally. Forty-eight hours post-administration, pancreatic tumor tissues were harvested to prepare frozen sections, and GFP expression was observed and analyzed under a fluorescence microscope. ResultsThe PNP carrier exhibited a high loading capacity for pCAR. The successfully prepared PNP/pCAR nanoparticles were regular spheres with a hydrodynamic diameter of approximately (120±10) nm and a Zeta potential of about +(6±1) mV. They maintained good structural stability after incubation in PBS buffer for 7 d. Cell experiments demonstrated that PNP/pCAR exhibited no significant cytotoxicity in RAW 264.7 cells while being efficiently internalized and effectively escaping lysosomal degradation. The transfection positive rate of PNP/pCAR-GFP in RAW 264.7 cells reached (25±3)%, surpassing that of Lipofectamine 2000-loaded pCAR-GFP (Lipo/pCAR-GFP), which was (20±1)%.In vivo experiments revealed that, compared to unmodified PNP/pCAR, βGlus-PNP/pCAR exhibited strongerin situ pancreatic tumor targeting ability after oral administration. Furthermore, oral administration of βGlus-PNP/pCAR-GFP resulted in significant GFP protein expression detectable within pancreatic tumor tissues. ConclusionThis study successfully constructed and validated an orally administrable, pancreatic cancer-targeting polypeptide-based nano-gene delivery system. It provides an important technological foundation in delivery systems and experimental basis for the subsequent development of in situ CAR-M-based therapeutic strategies for pancreatic cancer.

Objective Orosomucoid1 （ORM1） is a novel target in the quest for anti-fatigue pharmacotherapy. Preliminary investigations have illuminated oleuropein （OLE） as a promising candidate molecule, poised to enhance ORM1 expression. To elucidate the influence of OLE on ORM1 protein expression and assess its ramifications on muscle endurance. Methods The impact of OLE on ORM1 protein expressions within hepatocytes and liver tissue was meticulously quantified through Western blotting; the effects of OLE on muscle endurance were evaluated via the rotarod and forced swimming tests; glycogen content within liver and muscle tissues was determined utilizing a specialized kit; and PAS staining was employed to visualize glycogen deposition in the gastrocnemius muscle. Results OLE demonstrated a capacity to elevate ORM1 protein expression in hepatocytes in a time- and dose-dependent manner, concurrently prolonging the duration of swimming and rotarod performance in mice, also in a time- and dose-dependent manner. Furthermore, OLE augmented ORM1 expression in liver tissue, elevated serum ORM1 levels, and enhanced glycogen reserves within the liver and muscle. Conclusion OLE may serve to amplify muscle endurance by elevating ORM1 levels in vivo and augmenting glycogen stores within skeletal muscle.

Background The quality of occupational health technical services is directly linked to the protection of workers' health rights and the efficacy of occupational disease prevention and control. However, the industry still faces critical challenges: sporadic instances of institutional non-compliance and persistent irregularities in professional practice continue to undermine overall service performance. Objective To assess the current quality status of occupational health technical services in Zhejiang Province and propose countermeasures for quality improvement, providing a scientific basis for policy optimization and service delivery quality enhancement. Methods A total of 69 occupational health technical service institutions in Zhejiang Province that obtained formal accreditation as of April 30, 2024, were sampled, including 3 public institutions and 66 private institutions (comprising 3 formerly Class-A, 28 formerly Class-B, 11 formerly Class-C, and 24 newly certified institutions). Following the Technical Protocol for Quality Monitoring of Occupational Health Technical Service in Zhejiang Province and the Technical Protocol for Proficiency Testing of Occupational Health Detection in Zhejiang Province, a quality assessment task force comprising national and provincial experts was established. Evaluation was conducted across four dimensions: qualification maintenance and compliance, standardization of technical services, authenticity of technical services, and proficiency testing, utilizing a combination of document review, on-site inspections, and technical skill assessments. Results The occupational health technical service institutions in Zhejiang Province were predominantly private entities (82.5%), with significant disparities in overall service quality. The pass rates for qualification maintenance and compliance, technical service standardization, technical service authenticity, and the excellence rate for laboratory proficiency testing were 81.5%, 80.7%, 97.3%, and 90.4%, respectively. Regarding qualification maintenance, the pass rates for "environmental conditions" (49.8%, 56.7%) and "instrumentation and equipment" (58.2%、65.6%) were significantly lower for formerly Class-C and newly certified institutions compared to other categories. In terms of technical standardization, "standardized on-site inspections" recorded the lowest pass rate (67.4%), with newly certified institutions at only 48.0%. Regarding technical service authenticity, formerly Class-C institutions exhibited issues such as missing raw chromatograms for blank samples (85.7% pass rate). In laboratory proficiency testing, public and formerly Class-A institutions achieved 100% excellence rates, but the performance of formerly Class-C and newly certified institutions was comparatively weak; specifically, the failure rate for organic analysis in formerly Class-C institutions reached 20%; the failure rate for dust testing items in newly certified institutions was 10.3%. Conclusion The overall quality of occupational health technical services in Zhejiang Province still requires significant improvement, particularly in basic institutional conditions, the standardization of on-site inspections, and laboratory proficiency in organic and dust analysis. Formerly Class-C and newly certified institutions should be the primary focus of quality management efforts. Differentiated regulatory strategies are recommended, alongside strengthening interim and ex-post supervision to gradually enhance the quality of occupational health technical services across all institutions.

OBJECTIVE To evaluate the cost-effectiveness of tafolecimab in patients with hypercholesterolemia， and provide support for optimizing management strategies for hypercholesterolemia and healthcare resource allocation. METHODS From the perspective of the Chinese healthcare system， an 11-state mutually exclusive Markov cohort model was developed to simulate disease progression and prognosis in the target population. The model cycle was set to one year， with a 30-year time horizon. Transition probabilities between health states were derived from the CREDIT series of clinical trials， while health utility values and medical cost parameters were sourced from the statistical yearbook and published literature. Quality-adjusted life years （QALYs） were used as the measure of health outcomes. Cost-effectiveness analysis was employed to calculate the incremental cost- effectiveness ratio （ICER） for three dosing regimens of tafolecimab [150 mg every 2 weeks （q2w）， 450 mg every 4 weeks （q4w）， and 600 mg every 6 weeks （q6w）] in combination with statins compared with control therapy （statins）. Using 1-3 times the per capita gross domestic product （GDP） of China in 2024 as willingness-to-pay threshold（WTP）， with a discount rate of 5%. Model robustness was assessed through one-way sensitivity analysis， probabilistic sensitivity analysis， and scenario analysis. RESULTS The 150 mg q2w regimen of tafolecimab yielded an ICER of 235 827.73 yuan/QALY， which was below the WTP （287 100 yuan/ QALY）， indicating that the regimen was cost-effective. In contrast， the ICERs for the 450 mg q4w and 600 mg q6w regimens were 329 498.24 and 318 630.51 yuan/QALY， respec-tively， both exceeding the WTP and thus not cost-effective.One-way sensitivity analysis identified the discount rate as a key influencing factor. Probabilistic sensitivity analysis showed that under the WTP set in this study， the probabilities of cost-effectiveness for the 450 mg q4w and 600 mg q6w regimens were 15.3% and 22.4%， respectively， while the 150 mg q2w regimen had an 85.2% probability of being cost-effective. The situational analysis revealed that， over a simulated time horizon of 5 to 30 years， the ICER of tafolecimab was progressively reduced compared with the control regimen. When the price of tafolecimab was lowered by more than 20%， all three dosing regimens were demonstrated to be cost-effective.CONCLUSIONS Under the current Chinese healthcare system， compared with statin monotherapy， tafolecimab （150 mg q2w） combination improves health outcomes in patients with hypercholesterolemia， and is cost-effective given the current WTP.

Fire twinkling is the common method in cupping therapy. In the teaching materials of acupuncture and moxibustion, and the national standard, Standardized Manipulations of Acupuncture and Moxibustion-Part 5: Cupping Therapy, this cupping technique is operated by igniting an alcohol-soaked cotton ball held with a forceps, placing it inside the cup, taking it out after "turning around in several circles", and placing the cup on the selected area. Based on the clinical experience of chief physician LI Yan, a high-efficient and safe fire twinkling was developed. Clamping the middle part of the cotton ball with a holder, dipping it in 95% ethanol, and squeezing the cotton ball to ensure no ethanol drops left; holding the cup with the dominant hand and covering the ignited cotton ball vertically, removing the cup immediately when the ball touching the cup bottom. Such manipulation mode, "flame going in and out directly", can avoid the potential safety hazards such as residual ethanol left on the cup opening, overheating of cup opening and accidentally falling-off of the ignited cotton ball.
Humans ; Cupping Therapy/instrumentation* ; Acupuncture Therapy/instrumentation* ; Fires

This study aimed to explore the effects and mechanisms of total extracts from Anthriscus sylvestris on pulmonary hypertension in rats. Sixty male SD rats were divided into normal(NC) group, model(M) group, positive drug sildenafil(Y) group, low-dose A. sylvestris(ES-L) group, medium-dose A. sylvestris(ES-M) group, and high-dose A. sylvestris(ES-H) group. On day 1, rats were intraperitoneally injected with monocrotaline(60 mg·kg~(-1)) to induce pulmonary hypertension, and the rat model was established on day 28. From days 15 to 28, intragastric administration of the respective treatments was performed. After modeling and treatment, small animal echocardiography was used to detect the right heart function of the rats. Arterial blood gas was measured using a blood gas analyzer. Hematoxylin and eosin(HE) staining and Masson staining were performed to observe cardiopulmonary pathological damage. Flow cytometry was used to detect apoptosis in the lung and myocardial tissues and reactive oxygen species(ROS) levels. Western blot was applied to detect the expression levels of transforming growth factor-β1(TGF-β1), phosphorylated mothers against decapentaplegic homolog 3(p-Smad3), Smad3, tissue plasminogen activator(t-PA), and plasminogen activator inhibitor-1(PAI-1) in lung tissue. A blood routine analyzer was used to measure inflammatory immune cell levels in the blood. Enzyme-linked immunosorbent assay(ELISA) was used to detect the expression levels of P-selectin and thromboxane A2(TXA2) in plasma. The results showed that, compared with the NC group, right heart hypertrophy index, right ventricular free wall thickness, right heart internal diameter, partial carbon dioxide pressure(PaCO_2), apoptosis in cardiopulmonary tissue, and ROS levels were significantly increased in the M group. In contrast, the ratio of pulmonary blood flow acceleration time(PAT)/ejection time(PET), right cardiac output, change rate of right ventricular systolic area, systolic displacement of the tricuspid ring, oxygen partial pressure(PaO_2), and blood oxygen saturation(SaO_2) were significantly decreased in the M group. After administration of the total extract of A. sylvestris, right heart function and blood gas levels were significantly improved, while apoptosis in cardiopulmonary tissue and ROS levels significantly decreased. Further testing revealed that the total extract of A. sylvestris significantly decreased the levels of interleukin-1β(IL-1β), interleukin-6(IL-6), and PAI-1 proteins in lung tissue, while increasing the expression of t-PA. Additionally, the extract reduced the levels of inflammatory cells such as leukocytes, lymphocytes, granulocytes, and monocytes in the blood, as well as the levels of P-selectin and TXA2 in plasma. Metabolomics results showed that the total extract of A. sylvestris significantly affected metabolic pathways, including arginine biosynthesis, tyrosine metabolism, and taurine and hypotaurine metabolism. In conclusion, the total extract of A. sylvestris may exert an anti-pulmonary hypertension effect by inhibiting the TGF-β1/Smad3 signaling pathway, thereby alleviating immune-inflammatory responses and thrombosis.
Animals ; Male ; Smad3 Protein/metabolism* ; Transforming Growth Factor beta1/metabolism* ; Rats, Sprague-Dawley ; Rats ; Signal Transduction/drug effects* ; Hypertension, Pulmonary/genetics* ; Thrombosis/immunology* ; Drugs, Chinese Herbal/administration & dosage* ; Humans ; Apoptosis/drug effects*

Microbial detection and control of traditional Chinese medicine(TCM) decoction pieces are crucial for the quality control of TCM preparations. It is also a key area of research in the measurement technology and equipment development for TCM manufacturing. Guided by TCM manufacturing measurement methodologies, this study presented a design of a novel portable microbial detection device, using Atractylodis Macrocephalae Rhizoma decoction pieces as a demonstration. Immunomagnetic separation technology was employed for specific isolation and labeling of target microorganisms. Enzymatic signal amplification was utilized to convert weak biological signals into colorimetric signals, constructing an optical biosensor. A self-developed smartphone APP was further applied to analyze the colorimetric signals and quantify target concentrations. A portable and automated detection system based on Arduino microcontroller was developed to automatically perform target microbial separation/extraction, as well as mimetic enzyme labeling and catalytic reactions. The developed equipment specifically focuses on the rapid and quantitative microbial analysis of TCM active pharmaceutical ingredients, intermediates in TCM manufacturing, and final TCM products. Experimental results demonstrate that the equipment could detect Salmonella in samples within 2 h, with a detection limit as low as 5.1 × 10~3 CFU·mL~(-1). The equipment enables the rapid detection of microorganisms in TCM decoction pieces, providing a potential technical solution for on-site rapid screening of microbial contamination indicators in TCM. It has broad application prospects in measurement technology for TCM manufacturing and offers strong technical support for the modernization, industrialization, and intelligent development of TCM.
Drugs, Chinese Herbal/analysis* ; Atractylodes/microbiology* ; Rhizome/microbiology* ; Biosensing Techniques/methods* ; Medicine, Chinese Traditional ; Colorimetry/instrumentation* ; Quality Control

OBJECTIVE: To screen out the key metabolites related to diabetic foot (DF) by integrating genome-wide association studies (GWAS) and metabolome genome-wide association studies (mGWAS). METHODS: The literature databases such as PubMed and China national knowledge infrastructure(CNKI), as well as genomics databases such as PAN UKBB, FinnGen, and IEU Open GWAS were systematically retrieved from database estobilishment to November 2024 on DF-related single nucleotide polymorphisms and genome-wide association studies. DF-single nucleotide polymorphism-metabolite network was constructed by mGWAS package and mGWAS-Explorer platform. The causal relationship between key factors was evaluated by two-sample Mendelian randomization. The genetic correlation between DF and 575 metabolites (source:IEU Open GWAS) was evaluated by linkage disequilibrium score regression. In vitro experiments were conducted to induce injury of human umbilical vein endothelial cells with 30 mM glucose and intervene with 20 μM γ-tocopherol. Changes in cell migration, scratch healing and tube formation function were detected. RESULTS: Twenty-senen literatures on single nucleotide polymorphism literatures and 3 studies on GWAS were included. Genetic analysis results showed DF-related single nucleotide polymorphisms were enriched in vascular endothelial dysfunction-related pathways (such as fluid shear stress and atherosclerosis). The results of metabolic network analysis screened out 19 associated metabolites, among which 12 such as γ -tocopherol and pyruvate had significant genetic correlations with DF. Mendelian randomization suggested matrix metalloproteinase-9(MMP-9) might be a potential driver of DF (β=0.658, P=0.063 8), and the occurrence of DF could reduce the level of high-density lipoprotein (β=-0.002, P=0.015 2). The results of in vitro experiments confirmed that γ -tocopherol could improve endothelial dysfunction induced by high glucose, specifically manifested as an increase in the number of cell migrations, improvement in the scratch healing rate, and recovery of tubule formation ability (P<0.05). CONCLUSION DF has a genetic basis centered on vascular endothelial dysfunction, and its occurrence can lead to further metabolic disorders. The key single nucleotide polymorphism loci integrated provided molecular markers for the risk stratification of foot ulcers in diabetic patients. In addition, γ -tocopherol has demonstrated clinical application potential as a therapeutic drug for DF by significantly improving the function of vascular endothelial cells in a high-glucose environment.
Humans ; Diabetic Foot/drug therapy* ; Polymorphism, Single Nucleotide ; Genome-Wide Association Study ; Genomics ; Metabolomics ; Metabolome

OBJECTIVE: To observe the clinical efficacy and safety of automatic pressure-controlled pressure cupping in patients with lumbar disc herniation, and compare it with traditional cupping. METHODS: A total of 100 patients diagnosed with lumbar disc herniation from January 2022 to August 2024 were selected and divided into two groups:the automatic pressure-controlled pressure cupping group (controlled pressure cupping group) and the traditional cupping group (control group), 50 cases in each group. In the controlled pressure cupping group, there were 18 males and 32 females, with an age of (51.98±12.69) years;in the control group, there were 16 males and 34 females, with an age of (51.32±12.05) years. The visual analogue scale(VAS), comfort score, and lumbar range of motion were observed before treatment and after the 1st, 3rd, and 7th treatments to evaluate the efficacy and safety. RESULTS: All patients completed the treatment intervention, with complete follow-up data collected. No adverse reactions or complications occurred during treatment and follow-up. After the 3rd treatment, the VAS score of the controlled pressure cupping group was (2.38±0.49), which was lower than that of the control group (2.94±0.68), with a statistically significant difference (P<0.001). In the controlled pressure cupping group, the VAS scores after the 1st, 3rd, and 7th treatments were significantly better than those before treatment (P=0.026);in the control group, the VAS scores after the 3rd and 7th treatments were better than those before treatment, but the difference was not statistically significant(P=0.182). Repeated-measures analysis of variance (ANOVA) on VAS scores at different time points in both groups showed that there were statistically significant differences in inter-group, time, and interaction effects (P<0.05). After the 1st treatment, in the controlled pressure cupping group, 0 patients felt comfortable, 42 patients (84%) felt mild discomfort, and 8 patients (16%) felt moderate discomfort;in the control group, 0 patients felt comfortable, 28 patients (56%) felt mild discomfort, and 22 patients(44%) felt moderate discomfort;the difference between the two groups was statistically significant(P=0.005). After the 3rd treatment, in the controlled pressure cupping group, 30 patients(60%) felt comfortable, 20 patients (40%) felt mild discomfort, and 0 patients felt moderate discomfort; in the control group, 9 patients (18%) felt comfortable, 41 patients (82%) felt mild discomfort, and 0 patients felt moderate discomfort;the difference between the two groups was statistically significant(P<0.001). There was no statistically significant difference in comfort between the two groups after the 7th treatment(P>0.001). There was no statistically significant difference in lumbar range of motion between the two groups before and after treatment(P>0.05);compared with before treatment, the lumbar range of motion of both groups after treatment was significantly improved, with statistically significant differences (P<0.001). CONCLUSION Automatic pressure-controlled pressure cupping can effectively relieve symptoms in patients with lumbar disc herniation, with excellent safety.
Humans ; Female ; Male ; Intervertebral Disc Displacement/physiopathology* ; Middle Aged ; Adult ; Lumbar Vertebrae/physiopathology* ; Cupping Therapy/methods* ; Pressure ; Aged ; Treatment Outcome