Background The quality of occupational health technical services is directly linked to the protection of workers' health rights and the efficacy of occupational disease prevention and control. However, the industry still faces critical challenges: sporadic instances of institutional non-compliance and persistent irregularities in professional practice continue to undermine overall service performance. Objective To assess the current quality status of occupational health technical services in Zhejiang Province and propose countermeasures for quality improvement, providing a scientific basis for policy optimization and service delivery quality enhancement. Methods A total of 69 occupational health technical service institutions in Zhejiang Province that obtained formal accreditation as of April 30, 2024, were sampled, including 3 public institutions and 66 private institutions (comprising 3 formerly Class-A, 28 formerly Class-B, 11 formerly Class-C, and 24 newly certified institutions). Following the Technical Protocol for Quality Monitoring of Occupational Health Technical Service in Zhejiang Province and the Technical Protocol for Proficiency Testing of Occupational Health Detection in Zhejiang Province, a quality assessment task force comprising national and provincial experts was established. Evaluation was conducted across four dimensions: qualification maintenance and compliance, standardization of technical services, authenticity of technical services, and proficiency testing, utilizing a combination of document review, on-site inspections, and technical skill assessments. Results The occupational health technical service institutions in Zhejiang Province were predominantly private entities (82.5%), with significant disparities in overall service quality. The pass rates for qualification maintenance and compliance, technical service standardization, technical service authenticity, and the excellence rate for laboratory proficiency testing were 81.5%, 80.7%, 97.3%, and 90.4%, respectively. Regarding qualification maintenance, the pass rates for "environmental conditions" (49.8%, 56.7%) and "instrumentation and equipment" (58.2%、65.6%) were significantly lower for formerly Class-C and newly certified institutions compared to other categories. In terms of technical standardization, "standardized on-site inspections" recorded the lowest pass rate (67.4%), with newly certified institutions at only 48.0%. Regarding technical service authenticity, formerly Class-C institutions exhibited issues such as missing raw chromatograms for blank samples (85.7% pass rate). In laboratory proficiency testing, public and formerly Class-A institutions achieved 100% excellence rates, but the performance of formerly Class-C and newly certified institutions was comparatively weak; specifically, the failure rate for organic analysis in formerly Class-C institutions reached 20%; the failure rate for dust testing items in newly certified institutions was 10.3%. Conclusion The overall quality of occupational health technical services in Zhejiang Province still requires significant improvement, particularly in basic institutional conditions, the standardization of on-site inspections, and laboratory proficiency in organic and dust analysis. Formerly Class-C and newly certified institutions should be the primary focus of quality management efforts. Differentiated regulatory strategies are recommended, alongside strengthening interim and ex-post supervision to gradually enhance the quality of occupational health technical services across all institutions.

Neoadjuvant therapy has become the standard treatment for locally advanced resectable esophageal cancer, significantly improving long-term survival compared to surgery alone. Neoadjuvant therapy has evolved to include various strategies, such as concurrent chemoradiotherapy, chemotherapy, immunotherapy, or targeted combination therapy. This enriches clinical treatment options and provides a more personalized and scientific treatment approach for patients. This article aims to comprehensively summarize current academic research hot topics, review the rationale and evaluation measures of neoadjuvant therapy, discuss challenges in restaging methods after neoadjuvant therapy, and identify the advantages and disadvantages of various neoadjuvant therapeutic strategies.

AIM To explore the clinical effects of Jiawei Yanghe Decoction combined with Budesonide and Formoterol Fumarate Powder for Inhalation on patients with mild to moderate bronchial asthma in chronic and persistent period.METHODS One hundred and eighteen patients were randomly assigned into control group(59 cases)for 4-week administration of Budesonide and Formoterol Fumarate Powder for Inhalation,and observation group(59 cases)for 4-week administration of both Jiawei Yanghe Decoction and Budesonide and Formoterol Fumarate Powder for Inhalation.The changes in clinical effects,ACT score,bronchial asthma control rate,pulmonary function indices(FEV1,PEF,FEV1％,PEF％),inflammatory indices(EOS,EOS％,FeNO),TCM syndrome score and incidence of adverse reactions were detected.RESULTS The observation group demonstrated higher total effective rate than the control group(P＜0.05).After the treatment,the two groups displayed increased bronchial asthma control rate,ACT score,PEF(P＜0.05),and decreased TCM syndrome score(P＜0.05),especially for the observation group(P＜0.05);the observation group exhibited increased FEV1,FEV1％,PEF％(P＜0.05),among which FEV1,PEF％were higher than those in the control group(P＜0.05);the observation group showed decreased inflammatory indices(P＜0.05),among which FeNO was lower than that in the control group(P＜0.05).No significant difference in incidence of adverse reactions was found between the two groups(P＞0.05).CONCLUSION For the patients with mild to moderate bronchial asthma in chronic and persistent period,Jiawei Yanghe Decoction combined with Budesonide and Formoterol Fumarate Powder for Inhalation can safely and effectively alleviate clinical symptoms,improve pulmonary functions,airway inflammatory reactions,and enhance bronchial asthma control rate.

Objective To verify the efficacy of a domestic human DNA quantification kit based on real-time fluorescence quantitative PCR in detecting the total human DNA concentration,male DNA concen-tration in mixed male/female DNA samples,the degree of DNA degradation and inhibitor tolerance.Methods Samples with different concentrations,different male/female ratios,different concentrations of inhibitors,and different degradation degrees were tested using the domestic human DNA quantification kit based on real-time fluorescence quantitative PCR.This kit was compared with a similar product on the market and was applied to the detection of DNA from real cases.Results This human DNA quan-tification kit can effectively detect human DNA as low as 0.001 65 ng/μL,and 6.25 pg/μL of male DNA in mixed samples with a male-to-female ratio of 1∶15 000.Even when the sample contains as high as 400 ng/μL of humic acid or 1 000 μmol/L of hemin alone,the DNA concentration can still be accurately detected.The degradation index can effectively characterize the degradation degree of the sample.This kit has been successfully applied in forensic practice.Conclusion This human DNA quan-tification kit is accurate and reliable in detection.It can accurately reflect the degradation of DNA and inhibitor tolerance.It has good performance in quantitative accuracy,determination of the male/female ratio in mixed samples,and inhibitor tolerance.It has application potential in forensic case examination.

Objective:To explore the effect of 3D printing extravascular stent implantation on the hemodynamics of the relevant large vessels in patients with nutcracker syndrome（NCS），and to discuss the clinical safety of this new procedure.Methods:A total of 30 NCS patients admitted to Tangdu Hospital Affiliated to Air Force Military Medical University from May to December 2023 were prospectively included. All the patients were received laparoscopic 3D printing extravascular stent implantation for NCS treatment. Whether the lumbago，abdominal pain，hematuria，proteinuria and varicocele had improved after the stent implantation were observed. The inner diameter，blood flow velocity of left renal vein，abdominal aorta，superior mesenteric artery and the diameter of inferior vena cava were measured by ultrasound 1 day before surgery and 8 days after surgery，respectively.In addition，the carotid-femoral pulse wave velocity（cfPWV）was measured by a newly developed method，by which the arterial stiffness could be detected based on Doppler ultrasound. The blood flow Doppler spectra of each subject were recorded at the right common carotid artery and the right common femoral artery，respectively，then based on that，the cfPWV was automatically calculated by this new technique. The above internal diameters，blood flow velocity and cfPWV were compared before and after the laparoscopic 3D printing extravascular stent implantation.Results:Among the 30 patients，the postoperative blood flow velocity at the left renal vein compression site was significantly lower than that before surgery［（50.7 ± 14.8）cm/s vs（122.1 ± 24.1）cm/s， P<0.001）］，and the clinical symptoms，including lumbago and abdominal pain，hematuria，proteinuria and varicocele were significantly improved（all P<0.05）. There were no significant changes in the internal diameter，blood flow velocity of abdominal aorta，superior mesenteric artery and the diameter of inferior vena cava，and cfPWV before and after operation（all P>0.05）. Conclusions:The 3D printing extravascular stent implantation through laparoscope can effectively improve left renal vein compression in patients with NCS，and cause no significant change in large arterial hemodynamics，suggesting that this surgical method is a safe and reliable treatment for patients with NCS.

Objective:To investigate the effect of anterior and posterior selective fusion strategy on evolution of coronal pattern in patients with Lenke 5C adolescent idiopathic scoliosis (AIS) and whether upper end vertebra (UEV)-1 strategy in anterior surgery would have an effect on postoperative coronal balance.Methods:A total of 108 Lenke 5C AIS patients with at least 2 years follow-up who underwent anterior or posterior selective thoracolumbar fusion surgery from January 2005 to December 2020 were enrolled, with 51 patients in the anterior group and 57 patients in the posterior group. The patients were categorized into three groups (type A, C 7PL-CSVL<20 mm; type B, C 7PL-CSVL ≥20 mm with C 7PL toward the concave side of the main curve; and type C, C 7PL-CSVL≥20 mm with C 7PL toward the convex side of the main curve) to investigate the evolution of coronal balance of each preoperative coronal pattern at the anterior and posterior groups. Parameters such as thoracolumbar Cobb angle, rate of coronal imbalance, and SRS-22 score were recorded at preoperative, 1 week postoperatively, and final follow-up in both groups. Results:The differences of basic date between the two groups were not statistically significant except for the fusion level (5.2±0.7 vs. 5.6±0.9, t=2.497, P=0.014). In the anterior group, a total of 27 patients with preoperative type A, 23 patients with preoperative type A maintained type A at the 1 week postoperatively, and 2 of them were converted to type C at the final follow-up. Four patients with preoperative type A converted to type C at the 1 week postoperatively, and all of them returned to type A at the final follow-up. A total of 23 patients with preoperative type C, four patients with preoperative type C maintained type C at the 1 week postoperatively, and one of them maintained type C at the final follow-up. Nineteen patients with preoperative type C converted to type A at the 1 week postoperatively, and all of them maintained type A at the final follow-up. In the posterior group, a total of 26 patients with preoperative type A, 22 patients with preoperative type A maintained type A at the 1 week postoperatively, and only 2 of these patients converted to type C at the final follow-up. Four of the preoperative type A patients converted to type C at the 1 week postoperatively, and all of them returned to type A at the final follow-up. A total of 29 patients with preoperative type C, thirteen patients with preoperative type C maintained type C at the 1 week postoperatively, and 7 of them maintained type C at the last follow-up. Sixteen patients with preoperative type C converted to type A at the 1 week postoperatively, of whom two converted to type C at the final follow-up. For patients with preoperative type C the rate of coronal imbalance was significantly lower in the anterior group than in the posterior group both in the immediate postoperative period (17% vs. 45%, P<0.05) and at the final follow-up (4% vs. 31%, P=0.038). The rate of coronal imbalance at final follow-up was significantly lower in the UEV-1 group than in the UEV group in the posterior approach (3% vs. 38%, P<0.05), and there was no difference between the two groups in the anterior approach. There were no significant differences in radiographic parameters and SRS-22 scores between the two groups, except for the thoracic Cobb angle at the final follow-up, which was greater in the anterior group than in the posterior group at the final follow-up (19.5±7.3 vs.16.4±5.6, t=2.427, P=0.017). Multivariate logistic regression analysis revealed that anterior surgery and Risser were risk factors for postoperative CIB of preoperative type C ( OR=21.138, P=0.030 and OR=0.406, P=0.048 respectively). Conclusion:For patients with preoperative type A, both anterior and posterior procedures lead to a satisfactory reconstruction of coronal balance. In patients with preoperative type C, anterior surgery acquire a better reconstruction of coronal balance. The strategy of proximal UEV-1 was similar to the strategy of UEV in terms of restoring coronary balance in anterior approach and it was unable to lower the rate of postoperative coronal imbalance. In contrast, UEV-1 strategy in posterior surgery was effective in reducing the rate of postoperative coronal imbalance.

Objective:To investigate the impact of correcting rotational subluxation through circumferential fusion and transforaminal lumbar interbody fusion (TLIF) on postoperative coronal plane imbalance in degenerative scoliosis.Methods:A retrospective analysis was conducted on the data of 108 patients with type A degenerative scoliosis in the Nanjing classification who underwent primary multi-segment posterior column osteotomy (PCO) with deformity correction and internal fixation at Nanjing Gulou Hospital from June 2017 to June 2021. Patients were divided into two groups based on the presence of preoperative rotational subluxation: the rotational subluxation group and the non-rotational subluxation group. The rotational subluxation group consisted of 60 patients, with 8 males and 52 females, aged 63.7±5.5 years (range, 56-75 years). The non-rotational subluxation group included 48 patients, with 5 males and 43 females, aged 64.4±5.2 years (range, 53-72 years). Within the rotational subluxation group, depending on whether TLIF was performed on the rotational subluxation segment, they were further categorized into the TLIF group and the PCO group. The TLIF group comprised 28 patients, while the PCO group had 32 patients. Full-spine anteroposterior and lateral X-rays were taken preoperatively, postoperatively, and at the last follow-up to measure coronal balance types and radiographic parameters. The differences in the lumbar Cobb angle, coronal balance distance (CBD), and the Cobb angle of the lumbosacral curve (Cobb-Fra angle) were compared between the rotational subluxation group and the non-rotational subluxation group, as well as between the TLIF group and the PCO group.Results:The average surgery duration ranged from 200 to 310 min, with a mean of 235±47 min. The intraoperative blood loss ranged from 700 to 2,400 ml, with an average of 950±355 ml. The number of fused segments in the rotational subluxation group was 7.6±2.1, ranging from 5 to 11 segments, while in the non-rotational subluxation group, it was 7.4±2.0, ranging from 5 to 10 segments. Postoperatively, 13%(8/60) of patients in the rotational subluxation group developed type C coronal imbalance, significantly higher than the 2%(1/48) in the non-rotational subluxation group. The immediate postoperative and final follow-up lumbar Cobb angles, CBD, and Cobb-Fra angles in the rotational subluxation group were 20.60°±10.73° and 20.33°±10.92°, 22.53±16.45 mm and 18.53±17.31 mm, 13.14°±4.40° and 11.23°±4.92°, respectively, which were higher than those in the non-rotational subluxation group (13.92°±7.02° and 12.92°±6.64°, 18.62±17.44 mm and 8.83±8.95 mm, 11.91°±3.03° and 9.52°±3.30°), with statistical significance ( P<0.05).. Among patients in the rotational subluxation group, the probability of new-onset coronal imbalance postoperatively was 4%(1/28) in the TLIF group, which was lower than the 22%(7/32) in the PCO group, with a statistically significant difference (χ 2=4.330, P=0.037). The immediate postoperative and final follow-up lumbar Cobb angles, CBD, and Cobb-Fra angles in the PCO group were 25.63°±11.00° and 25.13°±11.04°, 27.37±18.95 mm and 25.25±18.67 mm, 15.50°±3.62° and 14.08°±4.77°, respectively, which were significantly higher than those in the TLIF group (14.86°±6.96° and 14.86°±5.37°, 17.08±10.94 mm and 10.86±7.86 mm, 10.14°±3.37° and 8.46°±2.66°), with statistical significance ( P<0.05). Conclusion:For patients with Type A degenerative scoliosis combined with rotational subluxation according to the Nanjing classification, performing a 360-degree circumferential release and interbody fusion at the segment with rotatory subluxation can reduce the risk of developing new postoperative coronal imbalances.

BACKGROUND: Based on the China-VHD database, this study sought to develop and validate a Valvular Heart Disease- specific Age-adjusted Comorbidity Index (VHD-ACI) for predicting mortality risk in patients with VHD. METHODS & RESULTS: The China-VHD study was a nationwide, multi-centre multi-centre cohort study enrolling 13,917 patients with moderate or severe VHD across 46 medical centres in China between April-June 2018. After excluding cases with missing key variables, 11,459 patients were retained for final analysis. The primary endpoint was 2-year all-cause mortality, with 941 deaths (10.0%) observed during follow-up. The VHD-ACI was derived after identifying 13 independent mortality predictors: cardiomyopathy, myocardial infarction, chronic obstructive pulmonary disease, pulmonary artery hypertension, low body weight, anaemia, hypoalbuminaemia, renal insufficiency, moderate/severe hepatic dysfunction, heart failure, cancer, NYHA functional class and age. The index exhibited good discrimination (AUC, 0.79) and calibration (Brier score, 0.062) in the total cohort, outperforming both EuroSCORE II and ACCI (P < 0.001 for comparison). Internal validation through 100 bootstrap iterations yielded a C statistic of 0.694 (95% CI: 0.665-0.723) for 2-year mortality prediction. VHD-ACI scores, as a continuous variable (VHD-ACI score: adjusted HR (95% CI): 1.263 (1.245-1.282), P < 0.001) or categorized using thresholds determined by the Yoden index (VHD-ACI ≥ 9 vs. < 9, adjusted HR (95% CI): 6.216 (5.378-7.184), P < 0.001), were independently associated with mortality. The prognostic performance remained consistent across all VHD subtypes (aortic stenosis, aortic regurgitation, mitral stenosis, mitral regurgitation, tricuspid valve disease, mixed aortic/mitral valve disease and multiple VHD), and clinical subgroups stratified by therapeutic strategy, LVEF status (preserved vs. reduced), disease severity and etiology. CONCLUSION The VHD-ACI is a simple 13-comorbidity algorithm for the prediction of mortality in VHD patients and providing a simple and rapid tool for risk stratification.

N6-Methyladenosine (m6A) modification is a crucial post-transcriptional regulatory mechanism and the most abundant and highly conserved RNA epigenetic modification in eukaryotes. Previous studies have indicated the involvement of m6A modification in various tissue regeneration processes, including liver regeneration. Vir-like m6A methyltransferase associated protein (VIRMA) is an m6A methyltransferase with robust methylation capability. However, its role in liver regeneration remains poorly understood. In this study, we generated liver-specific Virma knockout mice using the Cre-loxP system and investigated the biological functions of VIRMA in liver regeneration using both the Associating Liver Partition and Portal vein Ligation for Staged Hepatectomy (ALPPS) mouse model and the carbon tetrachloride (CCl₄) mouse model. The expression level of VIRMA was rapidly up-regulated after ALPPS surgery and gradually down-regulated during liver repair. Virma deficiency significantly impaired liver regeneration capacity and disrupted cell cycle progression. Methylated RNA immunoprecipitation sequencing (MeRIP-seq) analysis revealed that Shq1 is an effective downstream target of VIRMA-mediated m6A modification. The upregulation of Shq1 enhanced the proliferation ability of cells, which was attenuated by the specific AKT inhibitor ipatasertib. Supplementation of Shq1 in vivo alleviated the liver cell proliferation inhibition caused by Virma deficiency. Furthermore, the m6A-binding protein heterogeneous nuclear ribonucleoprotein a2b1 (HNRNPA2B1) enhanced the mRNA stability of Shq1. Mechanistically, Virma deficiency resulted in decreased m6A modification on Shq1 mRNA, leading to reduced binding ability of m6A-binding protein HNRNPA2B1 with Shq1, thereby decreasing the mRNA stability of Shq1 and reducing its protein expression level. Downregulation of Shq1 inhibited the PI3K/AKT pathway, thereby suppressing cell proliferation and cell cycle progression, ultimately impeding liver regeneration. In summary, our results demonstrate that VIRMA plays a critical role in promoting liver regeneration by regulating m6A modification, providing valuable insights into the epigenetic regulation during liver regeneration.

In this paper, near-infrared spectroscopy(NIRS) was employed to analyze 129 batches of commercial products of Reduning Injection. The batch reporting rate was estimated according to the report of Reduning Injection in the direct adverse drug reaction(ADR) reporting system of the drug marketing authorization holder of the Center for Drug Reevaluation of the National Medical Products Administration(National Center for ADR Monitoring) from August 2021 to August 2022. According to the batch reporting rate, the samples of Reduning Injection were classified into those with potential risks and those being safe. No processing, random oversampling(ROS), random undersampling(RUS), and synthetic minority over-sampling technique(SMOTE) were then employed to balance the unbalanced data. After the samples were classified according to appropriate sampling methods, competitive adaptive reweighted sampling(CARS), successive projections algorithm(SPA), uninformative variables elimination(UVE), and genetic algorithm(GA) were respectively adopted to screen the features of spectral data. Then, support vector machine(SVM), logistic regression(LR), k-nearest neighbors(KNN), naive bayes(NB), random forest(RF), and artificial neural network(ANN) were adopted to establish the risk prediction models. The effects of the four feature extraction methods on the accuracy of the models were compared. The optimal method was selected, and bayesian optimization was performned to optimize the model parameters to improve the accuracy and robustness of model prediction. To explore the correlations between potential risks of clinical use and quality test data, TreeNet was employed to identify potential quality parameters affecting the clinical safety of Reduning Injection. The results showed that the models established with the SVM, LR, KNN, NB, RF, and ANN algorithms had the F1 scores of 0.85, 0.85, 0.86, 0.80, 0.88, and 0.85 and the accuracy of 88%, 88%, 88%, 85%, 91%, and 88%, respectively, and the prediction time was less than 5 s. The results indicated that the established models were accurate and efficient. Therefore, near infrared spectroscopy combined with machine learning algorithms can quickly predict the potential risks of clinical use of Reduning Injection in batches. Three key quality parameters that may affect clinical safety were identified by TreeNet, which provided a scientific basis for improving the safety standards of Reduning Injection.
Spectroscopy, Near-Infrared/methods* ; Drugs, Chinese Herbal/administration & dosage* ; Machine Learning ; Algorithms ; Humans ; Quality Control