ObjectiveTo analyze the epidemiological characteristics and spatial clustering patterns of brucellosis in humans in Zhangjiakou City, Heibei Province from 2018 to 2023, so as to provide a basis for the prevention and control of brucellosis. MethodsIncidence data of brucellosis in Zhangjiakou City from 2018 to 2023 were collected. Descriptive epidemiological analysis, Joinpoint regression modelling, and spatial autocorrelation analysis were used to analyze the temporal trends and spatial clustering patterns of the epidemic. ResultsA total of 3 812 cases of brucellosis were reported in Zhangjiakou City from 2018 to 2023, with no death case, yielding an average annual incidence rate of 15.43/100 000 (incidence range: 12.82/100 000‒17.76/100 000). Cases of brucellosis occurred year-round, with a distinct seasonal pattern, predominantly concentrated between March and September, peaking in May and June. The male-to-female ratio was 2.58∶1, with a higher incidence in males than that in females. The highest incidence rates were observed in the 40‒<50 years (74.98/100 000) and 50‒<60 years age group (87.14/100 000). The majority of cases were farmers and herdsmen (3 557 cases, 93.31%). Joinpoint regression analyses indicated that from 2018 to 2023, the incidence rate of human brucellosis in pastoral areas of Zhangjiakou City showed a declining trend (APC=-9.70%, 95%CI: -15.31%‒ -4.63%), while the incidence rate in mixed-use areas exhibited an increasing trend (APC=6.90%, 95%CI: 0.17%‒14.30%). Spatial clustering analyses showed that the incidence of brucellosis in Zhangjiakou from 2018 to 2023 was non-randomly distributed across the whole city, with a positive spatial correlation and significant clustering (Moran’s I>0, all P<0.001). Local spatial autocorrelation analyses showed that the high-high clusters were concentrated in the pastoral areas during 2018‒2020. From 2021 onward, the number of high-high clusters in mixed and non-pastoral regions exceeded those in traditional pastoral areas. ConclusionFrom 2018 to 2023, the incidence of brucellosis in Zhangjiakou City showed a declining trend, with significant spatial clustering observed across the city. It is recommended to intensify health education among males aged 40‒<60 years. Scientific livestock management practices should be promoted in non-pastoral and mixed areas, and cross-sectoral quarantine and joint prevention and control efforts should be strengthened as well.

Objective To investigate the clinical efficacy of the traditional Chinese medicine(TCM)throat opening and brightening method in treating unilateral vocal cord paralysis(UVCP).Methods Sixty patients with UVCP were prospectively collected and randomly assigned to two groups:the Chinese herbal medicine group(trea-ted with Buyang Huanwu Decoction,n=30)and the throat opening and brightening method group(treated with TCM throat opening and brightening method,n=30).The clinical studies that had utilized injection laryngoplasty for the treatment of UVCP(historical control group).Evaluation indicators included the voice handicap index-10(VHI-10),GRBAS-G,objective acoustic measurements of voice(vocal intensity,F0,shimmer,jitter,HNR),and aerodynamic measurements(maximum phonation time,MPT).Results Before treatment,no significant differences were observed between the two groups in all the evaluation indicators(P＞0.05).Post-treatment,the throat open-ing and brightening method group demonstrated significant improvements in VHI-10,GRBAS-G,shimmer,jitter,HNR,and MPT compared to pre-treatment values(P＜0.01),and these improvements were superior to those in the Chinese herbal medicine group.Pre-treatment VHI-10,GRBAS-G,and shimmer scores in the throat opening and brightening method group were significantly higher than those in the historical literature group(P＜0.01).Af-ter treatment,no significant differences were noted in any assessed parameters between the two groups(P＞0.05).Conclusion The TCM throat opening and brightening method significantly enhances phonatory function and quality of life in patients with UVCP,showing comparable efficacy to injection laryngoplasty.

Objective:The clinical symptoms of children with global developmental delay (GDD) were analyzed to provide the scientific basis for the intervention of children with GDD.Methods:The results of the neuro-psychobehavioral scale were collected from 32 511 children with GDD from June 2020 to November 2023. Inclusion criteria: Children diagnosed with GDD according to the Diagnostic and Statistical Manual of Mental Disorders-V, ages 0.0 to 4.9 years. Exclusion criteria: children with common hearing impairment and visual impairment. The Chi-square tests were used for statistical analysis.Results:There were more boys than girls with GDD in outpatient clinics (68.2% vs. 31.8%). Among the children, the proportion of developmental delay in 5, 4, 3, and 2 domains was 31.1%, 23.4%, 22.9% and 22.6% respectively. The rate of delay in 2-3 domains was lower in boys (41.9%) than in girls (53.1%). The rate of delay in 4-5 domains was higher in boys (58.1%) than in girls (46.9%) ( χ2=352.11, P<0.001). Overall, outpatient GDD decreased with age. From 1.0-1.9 to 4.0-4.9 years of age, the proportion of children with developmental delay in 5 domains increased with age (18.2%, 36.4%, 43.9%, 52.4%). Among children aged 0.0-0.9 years, the proportion of 2 domains of developmental delay was higher (33.4%).Among children aged 1.0-1.9 years, the proportion of 2-3 domains of developmental delay was higher (30.7%). Among children aged 2.0-, 3.0-, 4.0-4.9 years, the proportion of developmental delay in 5 domains was higher (36.4%, 43.9%, 52.4%). In children with GDD, the fine motor delay occurred most frequently (85.1%), followed by social self-care (83.9%), language (79.0%), adaptation (62.3%), and gross motor (52.8%). The frequency of developmental delays in fine motor, adaptability, language, and social self-care in boys was higher than that in girls ( χ2=161.37, χ2=41.10, χ2=320.90, χ2=238.54, all P<0.001). The age groups with the highest delay incidence of gross motor, fine motor, adaptability, language, and social self-care were: 4.0-4.9 years (70.6%), 3.0-3.9 years (97.4%), 4.0-4.9 years (81.2%), 2.0-2.9 years (90.9%),2.0-2.9 years (95.4%). The proportions of fine motor delay in GDD children aged 0.0-0.9, 3.0-3.9 and 4.0-4.9 years were (74.5%, 97.4%, 96.8%) and the proportions of social self-care delay in GDD children aged 1.0- and 2.0-2.9 years were (92.1%, 95.4%). Peripheral and mild developmental delays were predominant in children with GDD. The proportion of severe language delay (6.4%) was higher than that in other fields. Conclusions:The proportion of GDD children with developmental delay in 4-5 domains was 54.5%. The most frequent domain of delay was fine motor. The frequencies of developmental delays in fine motor skills, adaptability, language, and social self-care in boys were higher than in girls. Most of the developmental delays in GDD children were marginal and mild. The rate of severe developmental delay in language was higher than in other domains.

Body weight abnormalities, including overweight, obesity, and underweight, have become a dual public health challenge in Chinese adults: overweight and obesity lead to a variety of chronic complications, while underweight increases the risks of malnutrition, sarcopenia, and organ dysfunction. To systematically address these issues, multidisciplinary experts in endocrinology, sports science, nutrition, and psychiatry from various regions have held multiple weight management seminars. Based on the latest epidemiological data and clinical evidence, they expanded the guideline to include assessment and intervention strategies for underweight, in addition to the core content of obesity management. This guideline outlines the etiological mechanisms, evaluation methods, and multidimensional management strategies for overweight and obesity, covering key areas such as diagnosis and assessment, medical nutrition therapy, exercise prescription, pharmacological intervention, and psychological support. It is intended to provide a scientific and standardized approach to weight management across the adult population, aiming to curb the rising prevalence of obesity, mitigate complications associated with abnormal body weight, and improve nutritional status and overall quality of life.

Objective·To fabricate a 3D-printed dental crown and bridge resin slurry using digital light processing(DLP)technology,investigate the influence of different printing parameters on its mechanical properties,determine the optimal printing parameters,and optimize the composition ratio of DLP-printed crown and bridge resin.Methods·Based on the viscosity characteristics of the mixture,the optimal ratio of urethane dimethacrylate(UDMA)to poly(propylene glycol)dimethacrylate(PPGDMA)was explored.After silanizing silicon dioxide(SiO2),it was mixed with UDMA,PPGDMA,and 2,4,6-trimethylbenzoyl bis(p-tolyl)phosphine oxide(TMO)to prepare DLP-printed dental crown and bridge resin slurries with different solid contents,and their rheological properties were tested.The Beer-Lambert equation was used to calculate the light penetration depth and critical exposure energy of the printing slurry.Based on these values,different exposure intensities,exposure times,post-curing times,and layer thicknesses were set respectively to carry out a series of printing experiments.By comparing and analyzing the flexural strength of the products under different printing parameters,the optimal printing parameter combination was screened out.Results·Viscosity tests showed that the optimal UDMA-to-PPGDMA ratio was 6∶4.The rheological behavior of printing slurries with different solid contents was tested,and the results showed that the DLP-printed dental crown and bridge resin with a solid content of 22%exhibited the best printing performance.According to the Beer-Lambert analysis,the light penetration depth Dp of the printing slurry was 119.79 μm,and the critical exposure energy Ec was 25.54 mJ/cm2.When the exposure intensity was 20 mW/cm2,the flexural strength reached a maximum of(132.39±8.92)MPa,and the difference was statistically significant(P<0.05).The flexural results of different exposure times showed that the flexural strength could reach(131.73±9.43)MPa when the single-layer exposure time was 3.0 s,and there was no significant difference when the exposure time was further increased.The flexural results of different post-curing times showed that when the post-curing time reached 30 min,there was no significant relationship between the flexural strength value and the increase in post-curing time.Regarding the influence of different layer thicknesses on the flexural performance,the test results showed that when the layer thickness was 50 μm,the result was the best,and the difference was statistically significant(P<0.001).Conclusion·Based on viscosity and rheological tests,a DLP-printable crown and bridge resin slurry was successfully developed.The optimal printing parameters were determined through statistical analysis of flexural strength:exposure intensity of 20 mW/cm2,exposure time of 3.0 s,post-curing time of 30 min,and a layer thickness of 50 μm.

Objective To introduce an innovative technique, the "balance-shaped sternal elevation device" and its application in the subxiphoid uniportal video-assisted thoracoscopic surgery (VATS) for anterior mediastinal masses resection. Methods Patients who underwent single-port thoracoscopic assisted anterior mediastinal tumor resection through the xiphoid process at the Department of Thoracic Surgery, West China Hospital, Sichuan University from May to June 2024 were included, and their clinical data were analyzed. Results A total of 7 patients were included, with 3 males and 4 females, aged 28-72 years. The diameter of the tumor was 1.9-17.0 cm. The operation time was 62-308 min, intraoperative blood loss was 5-100 mL, postoperative chest drainage tube retention time was 0-9 days, pain score on the 7th day after surgery was 0-2 points, and postoperative hospital stay was 3-12 days. All patients underwent successful and complete resection of the masses and thymus, with favorable postoperative recovery. Conclusion The "balance-shaped sternal elevation device" effectively expands the retrosternal space, providing surgeons with satisfactory surgical views and operating space. This technique significantly enhances the efficacy and safety of minimally invasive surgery for anterior mediastinal masses, reduces trauma and postoperative pain, and accelerates patient recovery, demonstrating important clinical significance and application value.

Objective To investigate the predictive value of changes in various indicators of routine blood tests for the severity of brain damage in patients with acute cerebral hemorrhage(ACH)in high-altitude regions.Methods A retrospective analysis was conducted using data from 249 inpatients diagnosed with ACH at a hospital in Xizang.Patient data,including demographic information and results of routine blood tests,were collected.Based on their Glasgow Coma Scale(GCS)scores,the patients were divided into 2 groups,a mild brain damage group(GCS≥13 points)and a moderate-to-severe brain damage group(GCS≤12 points).Demographic information and laboratory test results were compared between the two groups.Binary logistic regression analysis was performed to examine the relationship between indicators of routine blood tests and the severity of brain damage,and key indicators were identified.The receiver operating characteristic(ROC)curve analysis was used to evaluate the predictive performance of key indicators in various combinations for the severity of brain injury in ACH patients.Results The moderate-to-severe group had a higher proportion of high-altitude residents,as well as elevated levels of white blood cells(WBC),neutrophils(N),neutrophil-to-lymphocyte ratio(NLR),systemic inflammatory index(SII),neutrophil-to-platelet ratio(NPR),and C-reactive protein(CRP)-to-lymphocyte ratio(CLR),compared to the mild group.On the other hand,the levels of lymphocytes(L),platelets(PLT),and platelet-to-albumin ratio(PAR)in the moderate-to-severe group were lower than those in the mild group.Binary logistic regression analysis showed that WBC(OR=1.221,95%CI:1.127-1.322),CRP(OR=1.019,95%CI:1.004-1.033),CRP-to-albumin ratio(CAR)(OR=1.845,95%CI:1.137-2.996),and CLR(OR=1.018,95%CI:1.005-1.030)were positively associated with moderate-to-severe brain damage,and that their elevated levels were associated with an increase in risk by the corresponding folds.PAR(OR=0.845,95%CI:0.721-0.990)was negatively correlated with moderate-to-severe brain damage,with an increase resulting in a reduction of risk by 0.845 times.ROC curve analysis showed that,in the mild group,the combined AUC for WBC+CRP was 0.689(optimal cutoff value 0.19,specificity 0.776,95%CI:0.624-0.755);the PAR+CAR+CLR combination(CAR was not significant,P>0.05)had an AUC of 0.675(optimal cutoff value 0.19,specificity 0.760,95%CI:0.609-0.741);the key indicator combination of WBC+PAR+CLR(CRP was not significant,P>0.05)demonstrating the strong predictive performance moderate-to-severe brain damage,yielding an AUC of 0.737(optimal cutoff value 0.08,specificity 0.624,95%CI:0.676-0.798).Conclusion The indicator combinations of WBC+CRP,PAR+CLR,and WBC+PAR+CLR exhibit significant value for predicting the severity of brain injury in ACH patients and may serve as potential predictive tools for the severity of brain damage in patients with acute cerebral hemorrhage in high-altitude regions.

Objective·To fabricate a 3D-printed dental crown and bridge resin slurry using digital light processing(DLP)technology,investigate the influence of different printing parameters on its mechanical properties,determine the optimal printing parameters,and optimize the composition ratio of DLP-printed crown and bridge resin.Methods·Based on the viscosity characteristics of the mixture,the optimal ratio of urethane dimethacrylate(UDMA)to poly(propylene glycol)dimethacrylate(PPGDMA)was explored.After silanizing silicon dioxide(SiO2),it was mixed with UDMA,PPGDMA,and 2,4,6-trimethylbenzoyl bis(p-tolyl)phosphine oxide(TMO)to prepare DLP-printed dental crown and bridge resin slurries with different solid contents,and their rheological properties were tested.The Beer-Lambert equation was used to calculate the light penetration depth and critical exposure energy of the printing slurry.Based on these values,different exposure intensities,exposure times,post-curing times,and layer thicknesses were set respectively to carry out a series of printing experiments.By comparing and analyzing the flexural strength of the products under different printing parameters,the optimal printing parameter combination was screened out.Results·Viscosity tests showed that the optimal UDMA-to-PPGDMA ratio was 6∶4.The rheological behavior of printing slurries with different solid contents was tested,and the results showed that the DLP-printed dental crown and bridge resin with a solid content of 22%exhibited the best printing performance.According to the Beer-Lambert analysis,the light penetration depth Dp of the printing slurry was 119.79 μm,and the critical exposure energy Ec was 25.54 mJ/cm2.When the exposure intensity was 20 mW/cm2,the flexural strength reached a maximum of(132.39±8.92)MPa,and the difference was statistically significant(P<0.05).The flexural results of different exposure times showed that the flexural strength could reach(131.73±9.43)MPa when the single-layer exposure time was 3.0 s,and there was no significant difference when the exposure time was further increased.The flexural results of different post-curing times showed that when the post-curing time reached 30 min,there was no significant relationship between the flexural strength value and the increase in post-curing time.Regarding the influence of different layer thicknesses on the flexural performance,the test results showed that when the layer thickness was 50 μm,the result was the best,and the difference was statistically significant(P<0.001).Conclusion·Based on viscosity and rheological tests,a DLP-printable crown and bridge resin slurry was successfully developed.The optimal printing parameters were determined through statistical analysis of flexural strength:exposure intensity of 20 mW/cm2,exposure time of 3.0 s,post-curing time of 30 min,and a layer thickness of 50 μm.

Objective:The clinical symptoms of children with global developmental delay (GDD) were analyzed to provide the scientific basis for the intervention of children with GDD.Methods:The results of the neuro-psychobehavioral scale were collected from 32 511 children with GDD from June 2020 to November 2023. Inclusion criteria: Children diagnosed with GDD according to the Diagnostic and Statistical Manual of Mental Disorders-V, ages 0.0 to 4.9 years. Exclusion criteria: children with common hearing impairment and visual impairment. The Chi-square tests were used for statistical analysis.Results:There were more boys than girls with GDD in outpatient clinics (68.2% vs. 31.8%). Among the children, the proportion of developmental delay in 5, 4, 3, and 2 domains was 31.1%, 23.4%, 22.9% and 22.6% respectively. The rate of delay in 2-3 domains was lower in boys (41.9%) than in girls (53.1%). The rate of delay in 4-5 domains was higher in boys (58.1%) than in girls (46.9%) ( χ2=352.11, P<0.001). Overall, outpatient GDD decreased with age. From 1.0-1.9 to 4.0-4.9 years of age, the proportion of children with developmental delay in 5 domains increased with age (18.2%, 36.4%, 43.9%, 52.4%). Among children aged 0.0-0.9 years, the proportion of 2 domains of developmental delay was higher (33.4%).Among children aged 1.0-1.9 years, the proportion of 2-3 domains of developmental delay was higher (30.7%). Among children aged 2.0-, 3.0-, 4.0-4.9 years, the proportion of developmental delay in 5 domains was higher (36.4%, 43.9%, 52.4%). In children with GDD, the fine motor delay occurred most frequently (85.1%), followed by social self-care (83.9%), language (79.0%), adaptation (62.3%), and gross motor (52.8%). The frequency of developmental delays in fine motor, adaptability, language, and social self-care in boys was higher than that in girls ( χ2=161.37, χ2=41.10, χ2=320.90, χ2=238.54, all P<0.001). The age groups with the highest delay incidence of gross motor, fine motor, adaptability, language, and social self-care were: 4.0-4.9 years (70.6%), 3.0-3.9 years (97.4%), 4.0-4.9 years (81.2%), 2.0-2.9 years (90.9%),2.0-2.9 years (95.4%). The proportions of fine motor delay in GDD children aged 0.0-0.9, 3.0-3.9 and 4.0-4.9 years were (74.5%, 97.4%, 96.8%) and the proportions of social self-care delay in GDD children aged 1.0- and 2.0-2.9 years were (92.1%, 95.4%). Peripheral and mild developmental delays were predominant in children with GDD. The proportion of severe language delay (6.4%) was higher than that in other fields. Conclusions:The proportion of GDD children with developmental delay in 4-5 domains was 54.5%. The most frequent domain of delay was fine motor. The frequencies of developmental delays in fine motor skills, adaptability, language, and social self-care in boys were higher than in girls. Most of the developmental delays in GDD children were marginal and mild. The rate of severe developmental delay in language was higher than in other domains.