ObjectiveTo investigate the intervention effects and mechanisms of the flavonoid hyperoside （Hyp） on lipopolysaccharide （LPS）-induced inflammation in the zebrafish model. MethodsZebrafish larvae were either microinjected with 0.5 g·L^-1 LPS or immersed in 1 g·L^-1 LPS for the modeling of inflammation. The larvae were then treated with Hyp at 25， 50， and 100 mg·L^-1 through immersion for four consecutive days. The inflammatory phenotypes were assessed by analyzing the mortality rate， malformation rate， body length， and yolk sac area ratio. Behavioral tests were conducted to evaluate the inflammatory stress responses， and macrophage migration was observed by fluorescence microscopy. Additionally， the mRNA levels of inflammation-related genes， including interleukin-1β （IL-1β）， interleukin-6 （IL-6）， chemokine C-C motif ligand 2 （CCL2）， chemokine C-X3-C motif receptor 1 （CX3CR1）， chemokine C-C motif receptor 2 （CCR2）， and genes associated with the Toll-like receptor 4 （TLR4）/myeloid differentiation factor 88 （MyD88）/nuclear factor-kappa B （NF-κB） signaling pathway， were measured by Real-time quantitative polymerase chain reaction（Real-time PCR）. ResultsCompared with the pure water injection group， the model group exhibited increased mortality， malformation rates and yolk sac area ratio （P0.01）， reduced body length （P0.01）， increased total swimming distance and high-speed swimming duration （P0.01）， and up-regulated mRNA levels of TLR4， MyD88， NF-κB， IL-1β， IL-6， CCL2， CX3CR1， and CCR2 （P0.01）. Hyp at low， medium and high doses， as well as aspirin， reduced the mortality and malformation rates （P0.05，P0.01）， increased the body length （P0.05，P0.01）， decreased the yolk sac area ratio （P0.01）， reduced the high-speed swimming duration （P0.01）， and down-regulated the mRNA levels of TLR4， MyD88， NF-κB， IL-1β， IL-6， CCL2， CX3CR1， and CCR2 （P0.05，P0.01） compared with the model group. ConclusionHyp may modulate the TLR4/MyD88/NF-κB pathway to ameliorate inflammatory phenotypes and alleviate stress conditions in zebrafish， thereby exerting the anti-inflammatory effect.

The traditional Chinese medicine(TCM) industry is a crucial part of China's pharmaceutical sector and plays a strategic role in ensuring public health and promoting economic and social development. In response to the practical demand for high-quality development of the TCM industry, this paper focused on the bottlenecks encountered during the digital and intelligent transformation of TCM production systems. Specifically, it explored technical strategies and methodologies for constructing the best TCM production mode. An innovative artificial intelligence(AI)-centered technical architecture for TCM production was proposed, focusing on key aspects of production management including process modeling, state evaluation, and decision optimization. Furthermore, a series of critical technologies were developed to realize the best TCM production mode. Finally, a novel AI-driven TCM production mode characterized by a closed-loop system of "measurement-modeling-decision-execution" was presented through engineering case studies. This study is expected to provide a technological pathway for developing new quality productive forces within the TCM industry.
Artificial Intelligence ; Drugs, Chinese Herbal ; Medicine, Chinese Traditional/methods* ; Humans

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

OBJECTIVE: To investigate the protective effects of stir-fried Semen Armeniacae Amarum (SAA) against aristolochic acid I (AAI)-induced nephrotoxicity and DNA adducts and elucidate the underlying mechanism involved for ensuring the safe use of Asari Radix et Rhizoma. METHODS: In vitro, HEK293T cells overexpressing Flag-tagged multidrug resistance-associated protein 3 (MRP3) were constructed by Lentiviral transduction, and inhibitory effect of top 10 common pairs of medicinal herbs with Asari Radix et Rhizoma in clinic on MRP3 activity was verified using a self-constructed fluorescence screening system. The mRNA, protein expressions, and enzyme activity levels of NAD(P)H quinone dehydrogenase 1 (NQO1) and cytochrome P450 1A2 (CYP1A2) were measured in differentiated HepaRG cells. Hepatocyte toxicity after inhibition of AAI metabolite transport was detected using cell counting kit-8 assay. In vivo, C57BL/6 mice were randomly divided into 5 groups according to a random number table, including: control (1% sodium bicarbonate), AAI (10 mg/kg), stir-fried SAA (1.75 g/kg) and AAI + stir-fried SAA (1.75 and 8.75 g/kg) groups, 6 mice in each group. After 7 days of continuous gavage administration, liver and kidney damages were assessed, and the protein expressions and enzyme activity of liver metabolic enzymes NQO1 and CYP1A2 were determined simultaneously. RESULTS: In vivo, combination of 1.75 g/kg SAA and 10 mg/kg AAI suppressed AAI-induced nephrotoxicity and reduced dA-ALI formation by 26.7%, and these detoxification effects in a dose-dependent manner (P<0.01). Mechanistically, SAA inhibited MRP3 transport in vitro, downregulated NQO1 expression in vivo, increased CYP1A2 expression and enzymatic activity in vitro and in vivo, respectively (P<0.05 or P<0.01). Notably, SAA also reduced AAI-induced hepatotoxicity throughout the detoxification process, as indicated by a 41.3% reduction in the number of liver adducts (P<0.01). CONCLUSIONS Stir-fried SAA is a novel drug candidate for the suppression of AAI-induced liver and kidney damages. The protective mechanism may be closely related to the regulation of transporters and metabolic enzymes.
Aristolochic Acids/toxicity* ; Animals ; Humans ; NAD(P)H Dehydrogenase (Quinone)/genetics* ; HEK293 Cells ; Kidney/pathology* ; Cytochrome P-450 CYP1A2/genetics* ; Mice, Inbred C57BL ; DNA Adducts/drug effects* ; Male ; Kidney Diseases/drug therapy* ; Drugs, Chinese Herbal/therapeutic use* ; Mice ; Prunus armeniaca ; Plant Extracts

Peri-implant keratinized mucosa (PIKM) augmentation refers to surgical procedures aimed at increasing the width of PIKM. Consensus reports emphasize the necessity of maintaining a minimum width of PIKM to ensure long-term peri-implant health. Currently, several surgical techniques have been validated for their effectiveness in increasing PIKM. However, the selection and application of PIKM augmentation methods may present challenges for dental practitioners due to heterogeneity in surgical techniques, variations in clinical scenarios, and anatomical differences. Therefore, clear guidelines and considerations for PIKM augmentation are needed. This expert consensus focuses on the commonly employed surgical techniques for PIKM augmentation and the factors influencing their selection at second-stage surgery. It aims to establish a standardized framework for assessing, planning, and executing PIKM augmentation procedures, with the goal of offering evidence-based guidance to enhance the predictability and success of PIKM augmentation.
Humans ; Consensus ; Dental Implants ; Mouth Mucosa/surgery* ; Keratins

Objective To investigate the clinical phenotypes and genotypes of children with congenital fibrinogen disorder(CFD).Methods A retrospective analysis was conducted on the clinical data of 16 children with CFD.Polymerase chain reaction was used to amplify all exons and flanking sequences of the FGA,FGB,and FGG genes,and sequencing was performed to analyze mutation characteristics.Results Among the 16 children,there were 9 boys(56%)and 7 girls(44%),with a median age of 4 years at the time of attending the hospital.Among these children,9(56%)attended the hospital due to bleeding events,and 7(44%)were diagnosed based on preoperative examination.The children with bleeding events had a significantly lower fibrinogen activity than those without bleeding events(P<0.05).Genetic testing was conducted on 12 children and revealed a total of 12 mutations,among which there were 4 novel mutations,i.e.,c.80T>C and c.1368delC in the FGA gene and c.1007T>A and C.1053C>A in the FGG gene.There were 2 cases of congenital afibrinogenemia caused by null mutations of the FGA gene,with relatively severe bleeding symptoms.There were 7 cases of congenital dysfibrinogenemia mainly caused by heterozygous missense mutations of the FGG and FGA genes,and their clinical phenotypes ranged from asymptomatic phenotype to varying degrees of bleeding.Conclusions The clinical phenotypes of children with CFD are heterogeneous,and the severity of bleeding is associated with the level of fibrinogen activity,but there is a weak association between clinical phenotype and genotype.

Objective:To investigate the influence of curative-intent resection with textbook outcomes of liver surgery (TOLS) on long-term prognosis of gallbladder carcinoma (GBC).Methods:The retrospective cohort study was conducted. The clinicopathological data of 824 patients with GBC in the national multicenter database of Biliary Surgery Group of Elite Group of Chinese Journal of Digestive Surgery, who were admitted to 15 medical centers from January 2014 to January 2021, were collected. There were 285 males and 539 females, aged (62±11)years. According to the evalua-tion criteria of TOLS, patients were divided into those who achieved TOLS and those who did not achieve TOLS. Measurement data with normal distribution were represented as Mean± SD, and com-parison between groups was conducted using the independent sample t test. Measurement data with skewed distribution were represented as M( Q1, Q3), and comparison between groups was conducted using the Mann-Whitney U test. Count data were described as absolute numbers, and comparison between groups was conducted using the chi-square test. Comparison of ordinal data were conduc-ted using the Mann-Whitney U test. The Kaplan-Meier method was used to calculate survival rate and draw survival curve, and the Log-rank test was used for survival analysis. The COX stepwise regression model with backward Wald method was used for univariate and multivariate analyses. Results:(1) Achievement of TOLS. Of the 824 patients undergoing curative-intent resection for GBC, there were 510 cases achieving TOLS and 314 cases not achieving TOLS. (2) Follow-up. Of the 824 patients undergoing curative-intent resection for GBC, after excluding 112 deaths within 90 days after discharge, 712 cases were included for the survival analysis. The median follow-up time, median overall survival time and 5-year overall survival rate of the 510 patients achieving TOLS were 22.1(11.4,30.1)months, 47.6(30.6,64.6)months and 47.5%. The median follow-up time, median overall survival time and 5-year overall survival rate of the 202 patients not achieving TOLS were 14.0(6.8,25.5)months, 24.3(20.0,28.6)months and 21.0%. There was a significant difference in overall survival between patients achieving TOLS and patients not achieving TOLS ( χ2=58.491, P<0.05). (3) Analysis of factors influencing prognosis of patients. Results of multivariate analysis showed that TOLS, carcinoembryonic antigen (CEA), CA19-9, poorly differentiation of tumor, T2 stage of eighth edition of American Joint Committee on Cancer (AJCC) staging, T3 and T4 stage of eighth edition of AJCC staging, N1 stage of the eighth edition of AJCC staging, N2 stage of the eighth edition of AJCC staging, adjuvant therapy were independent factors influencing overall survival time of patients undergoing curative-intent resection for GBC ( hazard ratio=0.452, 1.479, 1.373, 1.612, 1.455, 1.481, 1.835, 1.978, 0.538, 95% c onfidence interval as 0.352-0.581, 1.141-1.964, 1.052-1.791, 1.259-2.063, 1.102-1.920, 1.022-2.147, 1.380-2.441, 1.342-2.915, 0.382-0.758, P<0.05). Conclusion:Patients under-going curative-intent resection for GBC with TOLS can achieve better long-term prognosis.

This study investigated the effect of different carrier materials on the in vitro properties of progesterone solid dispersions. The solid dispersions of the insoluble drug progesterone were prepared by hot melt extrusion technique using rheological properties as the index of investigation, and the in vitro properties of the solid dispersions were characterized. Scanning electron microscope revealed solid dispersions with rough surfaces and agglomerated microstructures into irregular lumpy particles. Differential scanning calorimetry and powder X-ray diffraction showed the change of progesterone crystalline form in solid dispersions from crystalline to amorphous state. In vitro dissolution studies showed that solid dispersions prepared with different carrier materials can effectively improve the dissolution rate of drugs. The results of the study showed that the type of carrier material had a significant effect on the in vitro properties of solid dispersions, providing a reference for the study of solid dispersions in the controlled release of insoluble drugs.

Aim To express and purify recombinant hCGH-CTP fusion protein in high-density suspension culture of Chinese hamster ovary cells (CHO-S), and to verify the lipid accumulation effect of rhCGH-CTP on 3T3-L1 mature adipocytes. Methods The recombinant protein expression vector (pcDNA3. 1-rhCGH-CTP) was constructed, achieved by fusing the human glycoprotein hormone beta 5/alpha 2 cDNA with CTP Linker. The expression plasmid was transiently transfected into the suspended CHO-S to express rhCGH-CTP protein and then purified, and the protein biological activity was verified. Intervention with 3T3-L1 mature adipocyte cells for 24 h was performed to detect the changes of intracellular triglyceride (TG) level. Results Western blot results showed that rhCGH-CTP protein was successfully expressed in CHO-S cells, and the yield was up to 715. 4 mg • L~ . The secreted protein was purified by AKTA pure system with higher purity that was up to 90% as identified by SDS-PAGE. In addition, the intracellular cAMP content of mature adipocytes with high expression of TSHR gene significantly increased after intervention with different concentrations of rhCGH-CTP protein by ELISA kit, indicating that rhCGH-CTP protein had biological activity. Oil red 0 staining showed that compared with the control group, the lipid content of mature adipocytes in the intervention groups with different concentrations of rhCGH-CTP protein significantly decreased (P < 0. 05) . Conclusions The rhCGH-CTP protein has been successfully expressed and purified with biological activity, and effectively reduce TG. This research provides an important theoretical basis for further revealing the physiological role of CGH protein and its potential application in clinical practice.

Objective To investigate the effect and mechanism of tetramethylpyrazine(TMP)on cognitive function in mice with post-traumatic stress disorder(PTSD).Methods The mice were randomly divided into normal group,model group and experimental group.Except for the normal group,the PTSD mouse model was established by single prolonged stress(SPS).The experimental group was intraperitoneally injected with 10 mg·kg-1 TMP,and the normal group and the model group were intraperitoneally injected with an equal amount of 0.9％NaCl.The Morris water maze,open field and elevated plus maze tests were used to evaluate the cognitive behavior of the mice.The apoptosis of neurons was detected by Terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling(TUNEL).The expression of ionized calcium binding adapter molecule-1(Iba-1)protein was detected by immunofluorescence(ICC).The content of oxidative stress inflammatory factors was detected by enzyme-linked immunosorbent assay(ELISA).Results The escape latency of the normal group,model group,and TMP group were(56.50±9.89),(87.16±10.48)and(68.63±10.19)s,respectively;the corner residence time of the open field were(190.37±40.64),(260.39±40.54)and(218.63±38.27)s,respectively;the apoptosis rates were(18.28±2.35)％,(39.36±3.65)％and(30.74±3.58)％,respectively;the fluorescence intensities of Iba-1 were(8.01±2.23)％,(50.87±7.31)％and(7.49±1.41)％;malondialdehyde contents were(5.46±0.95),(12.98±2.06)and(8.31±1.28)nmol·mg-1,respectively;tumor necrosis factor-α contents were(53.59±9.91),(115.46±11.53)and(74.38±10.77)pg·mL-1,respectively.The above indexes in the normal group and the experimental group were statistically significant compared with the model group(P＜0.05,P＜0.01).Conclusion TMP can improve the cognitive function of PTSD mice,and the mechanism may be related to the regulation of inflammation and oxidative stress.