Biomolecular condensates are formed through phase separation of biomacromolecules such as proteins and RNAs. These condensates exhibit liquid-like properties that can futher transition into more stable material states. They form complex internal structures via multivalent weak interactions, enabling precise spatiotemporal regulations. However, the use of inconsistent and non-standardized terminology has become increasingly problematic, hindering academic exchange and the dissemination of scientific knowledge. Therefore, it is necessary to discuss the terminology related to biomolecular condensates in order to clarify concepts, promote interdisciplinary cooperation, enhance research efficiency, and support the healthy development of this field.

[摘 要] 目的：构建程序性死亡受体1（PD-1）高表达的细菌质膜纳米囊泡（BMV）BMV-PD-1，评估其对小鼠肺癌移植瘤组织的靶向性。方法：通过质粒转化将PD-1与膜孔蛋白细胞溶素A（ClyA）融合质粒ClyA-PD-1-EGFP转入大肠杆菌BL21-Codonplus，使用激光共聚焦显微镜、SDS-PAGE和WB法检测融合蛋白ClyA-PD-1-EGFP的表达。提取质膜并采用挤出法，利用挤出器制备BMV-PD-1。采用透射电子显微镜（TEM）、纳米粒子跟踪分析（NTA）技术分别对BMV-PD-1的形态、粒径和膜电位进行检测，用WB鉴定PD-1蛋白的携带情况。采用激光共聚焦成像检测Lewis肺癌LLC细胞对BMV-PD-1的摄取。建立肺癌LLC细胞C57BL/6J小鼠皮下移植瘤模型，采用小动物活体成像系统评估BMV-PD-1的肿瘤靶向性。结果：激光共聚焦显微成像结果显示，质粒ClyA-PD-1-EGFP被转入BL21-Codonplus并成功表达蛋白。SDS-PAGE结果表明，ClyA-PD-1-EGFP在BL21-Codonplus中过表达。WB分析表明，PD-1在细菌中表达且在BMV-PD-1上呈高表达（P < 0.001）状态。NTA和TEM分析表明，BMV-PD-1是一种粒径为（145 ± 14） nm、表面呈负电性的球状囊泡。激光共聚焦成像显示，PD-1高表达能显著提升肺癌细胞对BMV-PD-1的摄取（P < 0.01），小动物活体成像也进一步证实PD-1高表达能有效提升BMV-PD-1的肿瘤靶向性（P < 0.01）。结论：本研究成功构建了PD-1高表达的细菌纳米囊泡BMV-PD-1，发现PD-1高表达可显著提高BMV-PD-1的肺癌LLC细胞移植瘤组织的靶向性，为进一步开发以BMV-PD-1为载体的肿瘤靶向药物递送系统奠定基础。

In recent years, cancer treatment methods and means are becoming more and more diversified, and single treatment methods often have limited efficacy, while the synergistic effect of immunity combined with chemotherapy can inhibit tumor growth more effectively. Based on this, we constructed a sodium alginate hydrogel composite system loaded with chemotherapeutic agents and tumor vaccines (named SA-DOX-NA) with a view to the combined use of chemotherapeutic agents and tumor vaccines. Firstly, the tumor vaccine (named NA) degradable under acidic conditions was constructed by in situ polymerization using chicken ovalbumin (OVA), acrylamide (AAM) and 2-(dimethylamino) ethyl methacrylate (DMAEMA) monomer. Then a hydrogel composite system SA-DOX-NA co-loaded with chemotherapeutic drug doxorubicin (DOX) and NA was prepared using sodium alginate as a matrix. The results showed that SA-DOX-NA had good in situ gel-forming ability and formed a mesh structure that could realize the co-loading of DOX and NA as well as the slow drug release. The electron microscopy results showed that SA-DOX-NA had good in situ gel-forming ability with good internal connectivity, and the three-dimensional mesh structure could realize the co-loading of DOX and NA as well as the slow drug release. The antitumor and immunomodulatory results showed that SA-DOX-NA both effectively inhibited the growth of tumor cells and efficiently promoted the proliferation and activation of DC2.4 dendritic cells without additional adjuvant. In summary, SA-DOX-NA exerts the dual efficacy of chemotherapy and immunotherapy for tumor treatment, and has a good application prospect in local tumor treatment.

Objective To evaluate the predictive ability and clinical application value of artificial intelligence (AI) systems in the benign and malignant differentiation and pathological type of pulmonary nodules, and to summarize clinical application experience. Methods A retrospective analysis was conducted on the clinical data of patients with pulmonary nodules admitted to the Department of Thoracic Surgery, Second Hospital of Lanzhou University, from February 2016 to February 2025. Firstly, pulmonary nodules were divided into benign and non-benign groups, and the discriminative abilities of AI systems and clinicians were compared. Subsequently, lung nodules reported as precursor glandular lesions (PGL), microinvasive adenocarcinoma (MIA), and invasive adenocarcinoma (IAC) in postoperative pathological results were analyzed, comparing the efficacy of AI systems and clinicians in predicting the pathological type of pulmonary nodules. Results In the analysis of benign/non-benign pulmonary nodules, clinical data from a total of 638 patients with pulmonary nodules were included, of which there were 257 males (10 patients and 1 patient of double and triple primary lesions, respectively) and 381 females (18 patients and 1 patient of double and triple primary lesions, respectively), with a median age of 55.0 (47.0, 61.0) years. Different lesions in the same patient were analyzed as independent samples. Univariate analysis of the two groups of variables showed that, except for nodule location, the differences in the remaining variables were statistically significant (P<0.05). Multivariate logistic regression analysis showed that age, nodule type (subsolid pulmonary nodule), average density, spicule sign, and vascular convergence sign were independent influencing factors for non-benign pulmonary nodules, among which age, nodule type (subsolid pulmonary nodule), spicule sign, and vascular convergence sign were positively correlated with non-benign pulmonary nodules, while average density was negatively correlated with the occurrence of non-benign pulmonary nodules. The area under the receiver operating characteristic curve (AUC) of the malignancy risk value given by the AI system in predicting non-benign pulmonary nodules was 0.811, slightly lower than the 0.898 predicted by clinicians. In the PGL/MIA/IAC analysis, clinical data from a total of 411 patients with pulmonary nodules were included, of which there were 149 males (8 patients of double primary lesions) and 262 females (17 patients of double primary lesions), with a median age of 56.0 (50.0, 61.0) years. Different lesions in the same patient were analyzed as independent samples. Univariate analysis results showed that, except for gender, nodule location, and vascular convergence sign, the differences in the remaining variables among the three groups of PGL, MIA, and IAC patients were statistically significant (P<0.05). Multinomial multivariate logistic regression analysis showed that the differences between the parameters in the PGL group and the MIA group were not statistically significant (P>0.05), and the maximum diameter and average density of the nodules were statistically different between the PGL and IAC groups (P<0.05), and were positively correlated with the occurrence of IAC as independent risk factors. The average AUC value, accuracy, recall rate, and F1 score of the AI system in predicting lung nodule pathological type were 0.807, 74.3%, 73.2%, and 68.5%, respectively, all better than the clinical physicians’ prediction of lung nodule pathological type indicators (0.782, 70.9%, 66.2%, and 63.7% respectively). The AUC value of the AI system in predicting IAC was 0.853, and the sensitivity, specificity, and optimal cutoff value were 0.643, 0.943, and 50.0%, respectively. Conclusion This AI system has demonstrated high clinical value in predicting the benign and malignant nature and pathological type of lung nodules, especially in predicting lung nodule pathological type, its ability has surpassed that of clinical physicians. With the optimization of algorithms and the adequate integration of multimodal data, it can better assist clinical physicians in formulating individualized diagnostic and treatment plans for patients with lung nodules.

Objective To explore feasibility of 3D metal printing technology combined with virtual design proximal clavicle anatomical plate.Methods A 52-year-old male healthy volunteer was retrospectively selected to design proximal clavicle anatomical plate system by using Mimics15.01,NX12.0 and other software.STL data were input into 3D printer to print 1∶1 clavicle model and proximal clavicle anatomical plate.The fit of the plate was tested in vitro and the accuracy of screw position was evaluated by imaging.Printing time of model,nail path design and fabrication time of the anatomical plate at proximal clavicle were recorded.Results The 3D metal printing proximal clavicle anatomical plate fitted well to clavicle model,orienta-tion of proximal clavicle locking screw was accurate,and X-ray and CT scan showed the screw position was good.Printing time of model,the time of nail path design,and the time of making anatomical plate of proximal clavicle were 120,15 and 300 min respectively.Conclusion The proximal clavicular anatomical plate system based on 3D metal printing technology could achieve good lamination of proximal clavicular fracture plate and precise screw placement,providing a new and accurate surgical method for the treatment of the proximal clavicular fracture.

Objective To explore establishment and finite element analysis of personalized proximal clavicular anatomical plate screw fixation model.Methods A 40-year-old male healthy volunteer was selected and the finite element analysis modules of 3D reconstruction software Mimics 15.01,Hypermesh 2019 and Abaqus 2020 were used.The finite element model of anatomic plate at the proximal clavicle was established,and a vertical load of 250 N was applied to the distal end of long axis of clavicle about 15 mm,then the overall structure,plate and screw displacement cloud image,Mises stress distribution were ob-served.Results The displacement distribution of the overall structure shows the maximum displacement was distributed on the distal clavicle.Under the four conditions of normal upper limb weight,longitudinal clavicle fracture,oblique fracture and shoulder impact violence during fall,longitudinal clavicle fracture and oblique fracture,the maximum displacement were 1.04 mm,1.03 mm,1.35 mm and 1.33 mm,respectively.The displacement cloud map of titanium alloy steel plate showed the largest displacement was distributed near the distal clavicular bone,and the maximum displacement were 0.89 mm,0.88 mm,1.10 mm and 1.09 mm,respectively.The displacement cloud map of titanium alloy screw showed the largest displacement was distribut-ed at the root of the distal screw,and the maximum displacement were 0.88 mm,0.87 mm,1.08 mm and 1.06 mm,respectively.Mises stress distribution showed the maximum stress was mainly distributed on titanium alloy plates and screws,and the stress on the clavicle was very small.Mises stress distribution cloud showed the maximum Mises stress was distributed at the second row of screw holes near the clavicle,and the maximum Mises stress were 673.1,678.1,648.5,654.4 MPa,respectively.The maximum stresses of titanium alloy screws were 414.5,417.4,415.8 and 419.7 MPa,respectively.Conclusion The biomechan-ical changes of personalized proximal clavicular anatomical plates are demonstrated by using 3D finite element method to pro-vide biomechanical data for personalized proximal clavicular anatomical plates.

Objective To investigate the cytoprotective effect and mechanism of tannic acid(TA)against hypoxia-induced damage in H9c2 cardiomyocytes.Methods A model of hypoxia-induced cell injury was established in rat H9c2 cardiomyocytes with conditioned medium and a hypoxia chamber.H9c2 cells were divided into control group,hypoxia group 1,low-and high-dose TA groups(0.2 and 0.8 μmol TA).Functional recovery experiments were performed using rotenone(Rot),and the cells were divided into hypoxia group 2,hypoxia+Rot group(50 nmol Rot),hy-poxia+Rot+high-dose TA group(50 nmol Rot+0.8 μmol TA),hypoxia+high-dose TA group(0.8 μmol TA).Cellular damage was assessed using CCK-8 assay and LDH test.Intracellular lev-els of ROS and mitochondrial reactive oxygen species(mitoSOX),cell apoptosis,and protein ex-pression of NLRP3,Caspase-1,GSDMD,and IL-1β were detected by chemiluminescent assay,flow cytometry,and Western blotting,respectively.ELISA was employed to measure the secretion of IL-1β.Results Compared to the control group,the hypoxia group 1 exhibited notably reduced cell density and viability,increased LDH activity and cell apoptotic rate,and elevated protein levels of NLRP3,Cleaved-Caspase-1,Cleaved-GSDMD,and Cleaved-IL-1β(P＜0.05).Both low-and high-dose TA treatment improved cell viability,reduced LDH activity and apoptotic rate,and decreased the protein levels of NLRP3,Cleaved-Caspase-1,Cleaved-GSDMD,and Cleaved-IL-1β and the se-cretion of IL-1β when compared with the hypoxia group 1(P＜0.05).Significant increases were observed in intracellular mitoSOX levels and the expression of NLRP3 and Cleaved-IL-1β at pro-tein level in the hypoxia+Rot group compared to the hypoxia group 2(P＜0.05).Similarly,the hypoxia+Rot+high-dose TA group also exhibited significant increases in mitoSOX and NLRP3 and Cleaved-IL-1β levels when compared to the hypoxia+high-dose TA group(0.85±0.02 vs 0.40±0.03,0.61±0.03 vs 0.47±0.05,0.70±0.06 vs 0.48±0.09,P＜0.05).Conclusion TA alleviates hypoxia-induced H9c2 cell injury by inhibiting ROS/NLRP3 pathway-mediated pyroptosis.

Sexual motivation refers to the intensity of willingness to have sex with or near a potential partner and is important for sexual health.At present,low sexual desire has become an increasingly prominent social problem,and there are no unified standards for its detection and evaluation.In this paper,we systematically sorted out the commonly used methods for detecting sexual motivation in male rats,including the three major categories of male-female mating,competitive selection and task acquisition,and discussed the relevant evaluation indexes and the advantages and disadvantages of various methods.We also explored the nature of sexual motivation,elaborated sexual contact behavior as a direct manifestation of sexual motivation,and proposed focusing relevant studies on contact be-haviors and differentiating sexual proximity from social proximity.

Objective:To analyze the factors for low libido in male patients with sexual dysfunction and provide some evidence for the clinical diagnosis and treatment of the condition.Methods:We retrospectively analyzed the clinical data on 111 cases of sex-ual dysfunction(including disorders in erection,ejaculation or libido)treated in the Zhengzhou University First Hospital from June to September 2023.According to the patients'complaints of low libido or accompanied symptoms,we divided them into a normal libido group(n=68)and a low libido(n=43),obtained their scores on IIEF-5,Premature Ejaculation Diagnostic Tool(PEDT),13-1-tem Self-Rating Libido Scale for Males(SRLS-M),Patients'Health Questionnaire-9(PHQ-9)and General Anxiety Disorder-7(GAD-7),examined the levels of the sexual hormones FSH,LH,PRL,T,free testosterone(fT),E2,?insulin-like growth factor 1(IGF-1)and growth hormone(GH),compared the basic parameters between the two groups,and analyzed their correlation with the libido values.Results:The IIEF-5,PEDT and libido scores and IGF-1 level were significantly higher and the GAD-7 score remark-ably lower in the normal than in the low libido group(P＜0.05),but no statistically significant differences were observed between the two groups in the PHQ-9 score and the levels FSH,LH,PRL,T,fT,E2,T/E2 and GH(P＞0.05).The libido value was correla-ted positively with the I1EF-5(r=0.28,P＜0.01)and PEDT scores(r=0.29,P＜0.01)and IGF-1 level(r=0.23,P＜0.05),but negatively with the GAD-7 score(r=-0.21,P＜0.05).Conclusion:Low libido results from multiple factors,which cannot be fully explained by sexual hormone levels but is closely related to the decreased level of IGF-1 and severity of ED and anxiety.

Objective:To study the epidemiological and genetic characteristics of coxsackievirus B3 (CVB3) circulating in Guangdong Province from 2008 to 2021.Methods:This study collected the specimens of hand, foot, and mouth disease (HFMD) cases from 2008 to 2021 that were positive for other enteroviruses except for enterovirus 71 (EV71), coxsackievirus A16 (CVA16), and CVA6, as well as the specimens of herpangina and neonatal infection cases from 2020 to 2021. Enteroviruses in these specimens were detected and their types were identified. CVB3 strains were isolated and the entire VP1 sequences of CVB3 strains were amplified and sequenced. The genetic features of CVB3 strains were analyzed using DNAStar 7.1 and MEGA 6.06 software packages.Results:Among 3 484 HFMD cases positive for other enteroviruses from 2008 to 2021, CVB3-positive cases accounted for 1.6% (57/3 484); among 560 cases of herpangina from 2020 to 2021, CVB3-positive cases accounted for 2.1% (12/560); one neonatal infection case in 2021 was positive for CVB3. CVB3-positive cases accounted for 67.1% (47/70) in 2021 and 18.6% (13/70) in 2020, while there were less than five cases in other years. Forty-eight CVB3 strains were isolated and the entire VP1 sequences of 26 CVB3 strains were obtained. Phylogenetic analysis indicated that the CVB3 strains could be divided into eight genotypes (A-H) and the strains of genotypes A, D and E were prevalent in the Chinese mainland. The 26 CVB3 strains isolated in Guangdong Province shared 80.2%-100.0% nucleotide homology, and belonged to two genotypes of D and E, with genotype D prevalent from 2008 to 2017 and genotype E prevalent from 2020 to 2021.Conclusions:CVB3 is prevalent sporadically in Guangdong Province from 2008 to 2017, but the epidemic intensity increased during 2020 and 2021. CVB3 strains of genotypes D and E are prevalent in Guangdong Province during 2008 to 2021, with genotype E being the prevalent genotype during 2020 and 2021.