Objective: To investigate the efficacy of magnesium-strontium co-doped hydroxyapatite mineralized collagen (MSHA/Col) in improving the bone repair microenvironment and enhancing bone regeneration capacity, providing a strategy to address the insufficient biomimetic composition and limited bioactivity of traditional hydroxyapatite mineralized collagen (HA/Col) scaffolds. Methods: A high-molecular-weight polyacrylic acid-stabilized amorphous calcium magnesium strontium phosphate precursor (HPAA/ACMSP) was prepared. Its morphology and elemental distribution were characterized by high-resolution transmission electron microscopy (TEM) and energy-dispersive spectroscopy. Recombinant collagen sponge blocks were immersed in the HPAA/ACMSP mineralization solution. Magnesium-strontium co-doped hydroxyapatite was induced to deposit within collagen fibers (experimental group: MSHA/Col; control group: HA/Col). The morphological characteristics of MSHA/Col were observed using scanning electron microscopy (SEM). Its crystal structure and chemical composition were analyzed by X-ray diffraction and Fourier transform infrared spectroscopy, respectively. The mineral phase content was evaluated by thermogravimetric analysis. The scaffold's porosity, ion release, and in vitro degradation performance were also determined. For cytological experiments, CCK-8 assay, live/dead cell staining, alkaline phosphatase staining, alizarin red S staining, RT-qPCR, and western blotting were used to evaluate the effects of the MSHA/Col scaffold on the proliferation, viability, early osteogenic differentiation activity, late mineralization capacity, and gene and protein expression levels of key osteogenic markers [runt-related transcription factor 2 (Runx2), collagen type Ⅰ (Col-Ⅰ), osteopontin (Opn), and osteocalcin (Ocn)] in mouse embryonic osteoblast precursor cells (MC3T3-E1). Results: HPAA/ACMSP appeared as amorphous spherical nanoparticles under TEM, with energy spectrum analysis showing uniform distribution of carbon, oxygen, calcium, phosphorus, magnesium, and strontium elements. SEM results of MSHA/Col indicated successful complete intrafibrillar mineralization. Elemental analysis showed the mass fractions of magnesium and strontium were 0.72% (matching the magnesium content in natural bone) and 2.89%, respectively. X-ray diffraction revealed characteristic peaks of hydroxyapatite crystals (25.86°, 31°-34°). Infrared spectroscopy results showed characteristic absorption peaks for both collagen and hydroxyapatite. Thermogravimetric analysis indicated a mineral phase content of 78.29% in the material. The scaffold porosity was 91.6% ± 1.1%, close to the level of natural bone tissue. Ion release curves demonstrated sustained release behavior for both magnesium and strontium ions. The in vitro degradation rate matched the ingrowth rate of new bone tissue. Cytological experiments showed that MSHA/Col significantly promoted MC3T3-E1 cell proliferation (130% increase in activity at 72 h, P < 0.001). MSHA/Col exhibited excellent efficacy in promoting osteogenic differentiation, significantly upregulating the expression of osteogenesis-related genes and proteins (Runx2, Col-Ⅰ, Opn, Ocn) (P < 0.01). Conclusion The MSHA/Col scaffold achieves dual biomimicry of natural bone in both composition and structure, and effectively promotes osteogenic differentiation at the genetic and protein levels, breaking through the functional limitations of pure hydroxyapatite mineralized collagen. This provides a new strategy for the development of functional bone repair materials

OBJECTIVE To establish the ultra-high performance liquid chromatography （UPLC） fingerprint of Jingtian granule， and to evaluate its quality by chemical pattern recognition. METHODS Luna® Omega Polar C18 column （150 mm×2.1 mm， 1.6 μm） was used as the chromatographic column， and acetonitrile-0.2% phosphoric acid solution was used as the mobile phase for gradient elution. The flow rate was 0.2 mL/min， the column temperature was 30 ℃， and the detection wavelength was 265 nm. With peak 16 as the reference peak， the UPLC fingerprint of Jingtian granule was established by the Similarity Evaluation System of Chromatographic Fingerprint of Traditional Chinese Medicine （2012 edition）. The common peaks were identified， the similarity evaluation was carried out， and the ownership of each common peak was confirmed. Hierarchical cluster analysis （HCA） and principal component analysis （PCA） in chemical pattern recognition methods were used to classify 13 batches of samples （S1- S13）， and orthogonal partial least squares-discriminant analysis （OPLS-DA） was used to identify the key components of the differences between different batches of samples. RESULTS RSDs of precision， repeatability and stability of the UPLC method were not more than 4.4%. A total of 25 common peaks were identified in the fingerprints of 13 batches of Jingtian granules. By comparing with the reference substance fingerprint， 10 common peaks were identified， namely peak 3 （hydroxymethyl-2-furaldehyde）， peak 5 （salidroside）， peak 8（chlorogenic acid）， peak 15 （cinnamic acid）， peak 19 （aloe-emodin）， peak 20 （ammonium glycyrrhizinate）， peak 21 （rhein）， peak 23 （emodin）， peak 24 （glycyrrhetinic acid）， peak 25 （chrysophanol）. The similarities of fingerprints of 13 batches of samples were 0.955-0.996. The results of HCA showed that 13 batches of samples could be divided into three categories， among which samples S1， S5， S7， S11-S13 were clustered in one category， S4 and S6 were clustered in one category， S2， S3 and S8-S10 were clustered in one category. PCA results showed that the cumulative variance contribution rate of principal components 1-7 was 92.666%. OPLS-DA further identified 13 differential components， which were mainly derived from Polygonati Rhizoma with wine steaming， Rhodiolae Crenulatae Radix Et Rhizoma， prepared Rhei Radix Et Rhizoma and Glycyrrhizae Radix Et Rhizome Praeparata Cum Melle. CONCLUSIONS The established UPLC fingerprint of Jingtian granule is simple， stable and reproducible. Combined with the chemical pattern recognition method， it can effectively reveal the overall quality difference between different batches of Jingtian granule. The quality of Polygonati Rhizoma with wine steaming， Rhodiolae Crenulatae Radix Et Rhizoma， prepared Rhei Radix Et Rhizoma， Dioscoreae Nipponicae Rhizoma， Polyporus， Cinnamomi Ramulus， Glycyrrhizae Radix Et Rhizome Praeparata Cum Melle is the key to the overall quality of Jingtian granule.

With the widespread adoption of low-dose CT screening and the extensive application of high-resolution CT, the detection rate of sub-centimeter lung nodules has significantly increased. How to scientifically manage these nodules while avoiding overtreatment and diagnostic delays has become an important clinical issue. Among them, lung nodules with a consolidation tumor ratio less than 0.25, dominated by ground-glass shadows, are particularly worthy of attention. The therapeutic challenge for this group is how to achieve precise and complete resection of nodules during surgery while maximizing the preservation of the patient's lung function. The "watershed topography map" is a new technology based on big data and artificial intelligence algorithms. This method uses Dicom data from conventional dose CT scans, combined with microscopic (22-24 levels) capillary network anatomical watershed features, to generate high-precision simulated natural segmentation planes of lung sub-segments through specific textures and forms. This technology forms fluorescent watershed boundaries on the lung surface, which highly fit the actual lung anatomical structure. By analyzing the adjacent relationship between the nodule and the watershed boundary, real-time, visually accurate positioning of the nodule can be achieved. This innovative technology provides a new solution for the intraoperative positioning and resection of lung nodules. This consensus was led by four major domestic societies, jointly with expert teams in related fields, oriented to clinical practical needs, referring to domestic and foreign guidelines and consensus, and finally formed after multiple rounds of consultation, discussion, and voting. The main content covers the theoretical basis of the "watershed topography map" technology, indications, operation procedures, surgical planning details, and postoperative evaluation standards, aiming to provide scientific guidance and exploration directions for clinical peers who are currently or plan to carry out lung nodule resection using the fluorescent microscope watershed analysis method.

Objective To construct an optimal prediction model of chickenpox in Urumqi, and to provide reference for formulating the prevention and control strategies of chickenpox. Methods The multivariate autoregressive moving average model (ARIMAX) and random forest model (RF) were established based on the monthly incidence of chickenpox in Urumqi from 2014 to 2018, and the monthly incidence of chickenpox in 2019 was used to test the models and evaluate their prediction effect. The prediction performance of the two models was compared, and the best model was selected to predict the incidence of chickenpox in Urumqi. Results The incidence of chickenpox in Urumqi showed a regular bimodal distribution with obvious seasonality, and it showed a slow upward trend from July 2014 to December 2019. The fitting model was ARIMA(0,1,0)(0,1,1)₁₂, the root mean square error (RMSE) and mean absolute error (MAE) of ARIMAX model training set were 1.29 and 0.95, respectively, and the RMSE and MAE of the test set were 1.88 and 1.44, respectively. The training set RMSE and MAE of RF model were 1.56 and 1.56, respectively, and the test set RMSE and MAE were 4.83 and 3.96, respectively. Conclusion The performance of ARIMAX model is better than that of RF model, which can better predict the incidence trend of chickenpox in Urumqi. It is necessary to optimize the prediction model according to the actual situation and provide scientific guidance for the prevention and control of chickenpox.

Objective To investigate the epidemiological characteristics and risk factors of non-alcoholic fatty liver disease in Jincheng between 2015 and 2020. Methods Clinical data of 8,578 medical check-ups at Physical Examination Center of ou hospital from January 2015 to December 2020 were retrospectively selected. The prevalence of non-alcoholic fatty liver disease in the last 5 years was recorded, and Logistic regression was utilized to identify the risk factors for the development of non-alcoholic fatty liver disease. Results The overall prevalence of non-alcoholic fatty liver disease in Jincheng was 14.57% in 2015-2020. The prevalence of non-alcoholic fatty liver disease was higher in men than in women (16.99% vs 10.98%) and highest in the 40-59 age group (18.76%). No statistical difference was reported in blood urea nitrogen (BUN) and serum creatinine (Scr) between groups (P>0.05), while statistical difference was found in diabetes, hypertension, body mass index (BMI), waist circumference, weekly exercise frequency, daily vegetable intake, triglycerides (TG), total cholesterol (TC), low-density lipoprotein cholesterol (LDL-C), high-density lipoprotein cholesterol (HDL-C), alanine aminotransferase (ALT) and uric acid (UA) between two groups (P<0.05). Multivariate Logistic regression analysis denoted that BMI (OR=2.794, 95% CI: 1.745-4.550), waist circumference (OR=2.586, 95% CI: 1.585-4.299), diabetes (OR=0.644, 95% CI: 1.425-2.781), hypertension (OR=1.479, 95% CI: 1.121-2.290), weekly exercise ≥6h (OR=0.617, 95% CI: 0.519-0.709), daily vegetable intake ≥300g (OR=0.590, 95% CI: 0.467-0.652), TG (OR=1.481, 95% CI: 1.122-1.996), TC (OR=1.562, 95% CI:1.143-2.135), LDL-C (OR=1.440, 95% CI: 1.139-2.048), HDL-C (OR=0.656 , 95% CI: 0.587-0.783) , ALT (OR=1.591, 95% CI: 1.056-2.183), and UA (OR=1.412, 95% CI: 1.009-1.887) were risk factors for non-alcoholic fatty liver disease (P<0.05) . Conclusion The prevalence of non-alcoholic fatty liver disease in Jincheng City from 2015 to 2020 is 14.57%, the prevalence of males is higher than that of females, and the prevalence rate is the highest in the 40-59 age group. Moreover , diabetes mellitus , hypertension , BMI , waist circumference , weekly exercise , daily vegetable intake , serum TG, TC, LDL-C, HDL-C, ALT, and UA are all associated with the risk of the disease.

Alzheimer’s disease (AD) is a prevalent neurodegenerative condition characterized by progressive cognitive decline and memory loss. As the incidence of AD continues to rise annually, researchers have shown keen interest in the active components found in natural plants and their neuroprotective effects against AD. Quercetin, a flavonol widely present in fruits and vegetables, has multiple biological effects including anticancer, anti-inflammatory, and antioxidant. Oxidative stress plays a central role in the pathogenesis of AD, and the antioxidant properties of quercetin are essential for its neuroprotective function. Quercetin can modulate multiple signaling pathways related to AD, such as Nrf2-ARE, JNK, p38 MAPK, PON2, PI3K/Akt, and PKC, all of which are closely related to oxidative stress. Furthermore, quercetin is capable of inhibiting the aggregation of β‑amyloid protein (Aβ) and the phosphorylation of tau protein, as well as the activity of β‑secretase 1 and acetylcholinesterase, thus slowing down the progression of the disease.The review also provides insights into the pharmacokinetic properties of quercetin, including its absorption, metabolism, and excretion, as well as its bioavailability challenges and clinical applications. To improve the bioavailability and enhance the targeting of quercetin, the potential of quercetin nanomedicine delivery systems in the treatment of AD is also discussed. In summary, the multifaceted mechanisms of quercetin against AD provide a new perspective for drug development. However, translating these findings into clinical practice requires overcoming current limitations and ongoing research. In this way, its therapeutic potential in the treatment of AD can be fully utilized.

Objective : To analyze the relationship between tongue volume, tongue position, dental and skeletal parameters in adult patients with different skeletal malocclusions, providing references for the etiology, diagnosis, and treatment of skeletal malocclusions. Methods: This study has been reviewed and approved by the Ethics Committee, and informed consent has been obtained from patients. Cone-beam computed tomography (CBCT) and cephalometric radiographs were collected from 60 adult patients, divided into three groups based on ANB angle values: skeletal Class I (0° < ANB < 4°), II (ANB > 4°), and III (ANB < 0°), with 20 cases in each group. Dental and skeletal parameters were measured using Dolphin software. Mimics software was used for 3D reconstruction of the tongue, oral cavity, and upper airway to measure tongue position, tongue volume, oral cavity volume, and upper airway volume, followed by statistical analysis. Results: The skeletal Class III group had significantly larger tongue and oral cavity volumes than the skeletal Class I and Class II groups (P = 0.02). Tongue length in the skeletal Class III group was also greater than in the skeletal Class I and Class II groups (P = 0.016). There was no significant difference in the ratio of tongue volume/oral cavity capacity among the three skeletal malocclusion groups (P > 0.05). Tongue volume was positively correlated with U1-SN and negatively correlated with overbite and overjet (P < 0.05). Additionally, tongue volume showed a significant positive correlation with Go-Gn and Pg-Np (P < 0.01), as well as with maxillary and mandibular dental arch width and basal bone arch width (P < 0.01). Upper airway volume was positively correlated with TT-VRL and TP-VRL (P < 0.05). Conclusion Patients with skeletal Class III malocclusion have larger tongue volumes and longer tongues. Patients with larger tongue volumes may also have larger, more forward-positioned mandibles. Patients with more posterior tongue positions may have smaller upper airway volumes. When developing orthodontic or orthognathic treatment plans, it is crucial to consider the relationship between tongue position, tongue volume, the jaws, and the airway to ensure optimal outcomes for both dental and orofacial function.

OBJECTIVE To establish fingerprint， chemical pattern recognition and multi-component quantification analysis of Sanzi powder， and evaluate its quality. METHODS HPLC method was adopted. The fingerprints of 15 batches of Sanzi powder were established by using the Similarity Evaluation System for Chromatographic Fingerprint of Traditional Chinese Medicine （2012 edition）. Cluster analysis， principal component analysis and orthogonal partial least squares-discriminant analysis were also conducted. The variable importance in projection （VIP） value greater than 1 was used as the index to screen the differential markers， and the contents of the differential markers were determined by the same HPLC method. RESULTS A total of 21 common peaks in the HPLC fingerprints of 15 batches of Sanzi powder were calibrated， and the similarities of them were 0.994- 0.999； 6 common peaks were identified， including gallic acid （peak 3）， garminoside （peak 10）， corilagin （peak 11）， chebulinic acid （peak 16）， ellagic acid （peak 18）， crocin Ⅰ （peak 19）. According to the results of cluster analysis， YKD2024LH005，No.YKD2023LH062） principal component analysis and orthogonal partial least squares-discriminant analysis， 15 batches of samples could be clustered into two categories： S1， S5， S7， S9， S14 were clustered into one category； S2-S4， S6， S8， S10-S13， S15 were clustered into one category. VIP values of 11 differential components such as corilagin， chebulinic acid and ellagic acid were higher than 1. Among 15 batches of samples， the contents of corilagin， chebulinic acid and ellagic acid ranged 2.667-5.152， 9.506- 13.522， 0.891-1.811 mg/g. CONCLUSIONS Established HPLC fingerprint and multi-component quantification analysis of Sanzi powder are rapid and simple， and can be used for quality evaluation of Sanzi powder by combining with chemical pattern recognition. Eleven components such as corilagin， chebulinic acid and ellagic acid are differential markers affecting the quality of Sanzi powder.

BackgroundPatients with depressive disorder often exhibit impaired decision-making functions. However， the relationship between decision-making abilities and depressive and anxiety symptoms in these patients remains unclear. ObjectiveTo explore the characteristics of decision-making behavior in patients with depressive disorder， and to analyze its relationship with clinical symptoms. MethodsA total of 48 patients diagnosed with depressive disorder according to the Diagnostic and Statistical Manual of Mental Disorders， fourth edition （DSM-IV） were recruited from the Department of Psychosomatic Medicine of the Affiliated Hospital of Southwest Medical University from October 2020 to May 2023. Concurrently， 52 healthy individuals matched for age and gender were recruited from Luzhou as the control group. Beck Depression Inventory （BDI） and Beck Anxiety Inventory （BAI） were used for assessment， and decision-making behavior was evaluated using Probabilistic Reversal Learning （PRL） task. Indicators assessed included the number of trials to criterion， perseverative errors， win-stay rate and lose-shift rate. Spearman correlation analysis was used to assess the correlation between BDI and BAI scores and PRL task indicators. ResultsThe depression group showed a significantly higher lose-shift rate compared with the control group （t=3.684， P<0.01）. There were no statistically significant differences between two groups in trials to criterion， perseverative errors and win-stay rate （t=0.329， 0.132， 0.609， P>0.05）. In depression group， BDI and BAI scores were positively correlated with the win-stay rate（r=0.450， 0.398， P<0.01）. ConclusionPatients with depressive disorder are more likely to change their decision-making strategies following negative outcomes. Furthermore， the severity of depressive and anxiety symptoms is associated with a greater propensity to maintain existing decisions after receiving positive feedback. ［Funded by 2019 Joint Project of Luzhou Science and Technology Bureau-Southwest Medical University （number， 2019LZXNYDJ39］

[Objective] To explore the strategy of blood management in patients with massive transfusion in the frigid plateau region. [Methods] The treatment process of a patient with liver rupture in the frigid plateau region was analyzed, and the blood management strategy of the frigid plateau region was discussed in combination with the difficulties of blood transfusion and literature review. [Results] The preoperative complete blood count (CBC) test results of the patient were as follows: RBC 3.14×10¹²/L, Hb 10⁶ g/L, HCT 30.40%, PLT 115.00×10⁹/L; coagulation function: PT 18.9 s, FiB 1.31 g/L, DD > 6 μg/mL, FDP 25.86 μg/mL; ultrasound examination and imaging manifestations suggested liver contusion and laceration / intraparenchymal hematoma, splenic contusion and laceration, and massive blood accumulation in the abdominal cavity; it was estimated that the patient's blood loss was ≥ 2 000 mL, and massive blood transfusion was required during the operation; red blood cell components were timely transfused during the operation, and the blood component transfusion was guided according to the patient's CBC and coagulation function test results, providing strong support and guarantee for the successful treatment of the patient. The patient recovered well after the operation, and the CBC test results were as follows: RBC 4.32×10¹²/L, Hb 144 g/L, HCT 39.50%, PLT 329.00×10⁹/L; coagulation function: APTT 29.3 s, PT 12.1 s, FiB 2.728 g/L, DD>6 μg/mL, FDP 25.86 μg/mL. The patient was discharged after 20 days, and regular follow-up reexamination showed no abnormal results. [Conclusion] Individualized blood management strategy should comprehensively consider the patient’s clinical symptoms, the degree of hemoglobin decline, dynamic coagulation test results and existing treatment conditions. Efficient and reasonable patient blood management strategies can effectively improve the clinical outcomes of massive transfusion patients in the frigid plateau region.