BACKGROUND:At present,there are few reports on the postoperative efficacy of arthroscopic coracoid tunnel-free suspension fixation and coracoid single tunnel fixation in the treatment of acromioclavicular joint dislocation at home and abroad.The specific clinical efficacy of the two procedures and whether there are other risks need to be explored. OBJECTIVE:To compare the short-term postoperative clinical efficacy of arthroscopic TightRope band plate fixation with single tunnel fixation of the coracoid process and tunnel-free suspension fixation of the coracoid process in the treatment of acute type Ⅲ-Ⅴ acromioclavicular joint dislocation. METHODS:A retrospective analysis was performed in 45 patients with acromioclavicular joint dislocation who met the inclusion criteria admitted to the Sixth Affiliated Hospital of Xinjiang Medical University from June 2019 to September 2022,and were divided into coracoid single tunnel fixation group(20 cases)and coracoid tunnel-free suspension fixation group(25 cases)according to the surgical treatment plan.Operation time,incision length,blood loss,Constant-Murley score,visual analogue scale score,the American Shoulder and Elbow Surgeons(ASES)score and intraoperative and postoperative complications of the shoulder joint before operation,3 months after surgery and the last follow-up were compared between the two groups. RESULTS AND CONCLUSION:All patients successfully completed the operation,and there was no important nerve or blood vessel damage during the operation.The operation time of the coracoid tunnel-free suspension fixation group was significantly shorter than that of the coracoid tunnel-free suspension fixation group(P<0.05).There was no significant difference in intraoperative blood loss and incision length between the two groups(P>0.05).All patients were followed up for 12 to 24 months,with an average of(15.29±2.73)months.In the coracoid single tunnel fixation group,at 3 months after operation and the final follow-up,the visual analogue scale score was significantly lower than the preoperative score(P<0.05);Constant-Murley score and ASES score were significantly increased compared with the preoperative values(P<0.05).In the coracoid tunnel-free suspension fixation group,at 3 months after operation and the final follow-up,the visual analogue scale score was significantly lower than the preoperative score(P<0.05);the Constant-Murley score and the ASES score were both significantly higher than the preoperative scores(P<0.05).At 3 months after operation,the Constant-Murley score of the coracoid tunnel-free suspension fixation group was higher than that of the coracoid single tunnel fixation group(P<0.05),while there was no significant difference in visual analogue scale and ASES scores between the two groups(P>0.05).There was also no significant difference in the visual analogue scale,Constant-Murley,and ASES scores between the two groups at the corresponding time points before surgery and at the final follow-up(P>0.05).Intraoperative and postoperative complications:In the coracoid single tunnel fixation group,there was one case of coracoid cortical rupture and fracture during the tunnel drilling during the operation,and one case of a loss of reduction at 3 months after operation,which was repositioned and fixed with hook plate transposition of the coracoacromial ligament.All patients had good acromioclavicular joint function recovery and no re-dislocation at the final follow-up.All patients in the coracoid tunnel-free suspension fixation group did not suffer from coracoid fractures,loss of reduction and other complications during surgery,postoperatively and at the last follow-up.To conclude,these two arthroscopic treatments for acute type Ⅲ-Ⅴ acromioclavicular joint dislocation have the advantages of less trauma,reliable reduction and fixation,and good recovery of shoulder joint function after operation.However,compared with the coracoid single tunnel technique,the coracoid tunnel-free suspension fixation requires shorter time,faster recovery of shoulder joint function in the short term,and avoids the establishment of bone tunnels on the coracoid process,which reduces the probability of iatrogenic fracture of the coracoid process during operation and provides a higher degree of safety.

OBJECTIVE To analyze the standardization and influential factors medication use for the prevention and treatment of glucocorticoid-induced osteoporosis （GIOP）. METHODS The data of inpatients diagnosed as rheumatic immune diseases in our hospital from January 1， 2022， to December 31， 2023， who required long-term use of glucocorticoids， were collected to analyze the risk stratification for GIOP-related fractures and the utilization of prevention and treatment drug in patients. Univariate analysis and Logistic stepwise regression analysis were employed to screen the factors influencing the standardization of prevention and treatment drug use in patients. RESULTS Among 354 patients， 148 patients （41.81%） had a low risk of osteoporotic fractures， 103 patients （29.10%） had a moderate risk， and 103 patients （29.10%） had a high risk. The top three drugs used in the prevention and treatment of GIOP were calcium supplements （78.81%）， vitamin D preparations （74.01%）， and anti-osteoporosis drugs （21.19%）. A total of 133 patients （37.57%） used the drugs for GIOP prevention and treatment in a standardized manner. The standardization rate of prevention and treatment in patients with low fracture risk was significantly higher than those with high and moderate fracture risk， and the standardization rate in patients with high fracture risk was significantly higher than those with moderate fracture risk （P＜0.05）. Besides， the univariate analysis showed that low fracture risk served as a prevention factor for the standardized use of prevention and treatment drugs for GIOP， while moderate fracture risk， smoking or drinking， the occurrence of adverse drug reactions， and having an educational level below junior college were risk factors for the normative use of GIOP prevention and treatment drug （P＜0.05）. Logistic stepwise regression analysis showed that patients with low and moderate fracture risk， a history of smoking or drinking， and adverse drug reactions to anti-osteoporosis drugs had a lower standardization rate of prevention and treatment； patients who visited tertiary hospital for the past month and had a longer duration of glucocorticoid use had a higher standardization rate of prevention and treatment （P＜0.05）. CONCLUSIONS The standardized rate of prevention and treatment drugs used for GIOP in our hospital is relatively low. Patients with moderate to high fracture risk， a history of smoking or drinking， and those who experience adverse drug reactions after taking anti-osteoporosis drugs have lower rates of standardized prevention and treatment. Conversely， patients who sought treatment at tertiary hospital for the past month and had a longer duration of glucocorticoid had higher rates of standardized prevention and treatment.

[Objective] To conduct a retrospective statistical comparison of alanine aminotransferase (ALT) test values in blood donors prior to blood collection, aiming to analyze the objective characteristics of the population with elevated ALT levels (ALT>50 U/L) and provide reference data for adjusting the screening eligibility threshold for ALT. [Methods] The preliminary ALT screening data of 30 341 blood donor samples collected prior to blood donation from three smart blood donation sites at the Shenzhen Blood Center between 2022 and 2023 were extracted and compared with data from a health examination department of a tertiary hospital in Shenzhen (representing the general population, n=24 906). Both datasets were categorized and statistically described. A retrospective analysis was conducted to examine the associations between ALT test results and factors such as donors' gender, age, ethnicity, donation site, donation season, and frequency of blood donation. [Results] The ALT levels in both blood donors and the general population were non-normally distributed. The 95th percentile of ALT values was calculated as 61.4 U/L (male: 67.8 U/L, female: 39.3 U/L) for blood donors and 58.1 U/L (male: 63.7 U/L, female: 51.2 U/L) for the general population. The non-compliance rates (ALT>50 U/L) were 7.65% (2 321/30 341) in blood donors and 7.08% (1 763/24 906) in the general population. There were significant differences (P<0.05) in the ALT failure rate among blood donors based on gender, age, and donation site, but no significant differences (P>0.05) during the blood donation season. There was no statistically significant difference (P>0.05) in the positive rates of four serological markers (HBsAg, anti HCV, HIV Ag/Ab, anti TP) for blood screening pathogens between ALT unqualified and qualified individuals (2.05% vs 1.5%). If the ALT qualification threshold was raised from 50 U/L to 90 U/L, the non qualification rates of male and female blood donors would decrease from 9.82% (2 074/21 125) to 2.23% (471/21 125) and from 2.70% (249/9 216) to 0.75% (69/9 216), respectively. Among the 154 blood donors who donated blood more than 3 times, 88.31% of the 248 ALT test results were in the range of 50-90 U/L. Among them, 9 cases had ALT>130 U/L, and ALT was converted to qualified in subsequent blood donations. [Conclusion] There are differences in the ALT failure rate among blood donors of different genders and ages, and different blood donation sites and operators can also affect the ALT detection values of blood donors. The vast majority of blood donors with ALT failure are caused by transient and non pathological factors. With the widespread use of blood virus nucleic acid testing, appropriately increasing the ALT qualification threshold for blood donors can expand the qualified population and alleviate the shortage of blood sources, and the risk of blood safety will not increase.

[Objective] To investigate the factors associated with alanine aminotransferase (ALT) abnormalities in multi-ethnic blood donors across five Zang autonomous prefectures in the plateau regions of Qinghai Province, and to provide evidence for ensuring blood safety and formulating screening strategies. [Methods] A retrospective analysis was performed on the ALT abnormal test results of blood donors in the Zang autonomous prefectures of Qinghai from 2022 to 2024. The correlations between ALT levels and factors including gender, age, altitude, and infectious markers were investigated. [Results] The overall ALT unqualified rate among blood donors in this region was 9.01%. Significant differences in ALT levels were observed across genders and age groups (P<0.05). Variations in ALT abnormality rates were also noted among different plateau regions (P<0.05). Overall, ALT values exhibited an increasing trend with rising altitude. The average ALT unqualified rates were 11.19% in Zang donors, 7.96% in Han donors, and 4.79% in donors from other ethnic groups (P<0.05). No statistically significant association was observed between ALT abnormality and the presence of HBV/HCV infectious markers (P>0.05). [Conclusion] In the plateau areas of Qinghai, multi-ethnic blood donors have a relatively high ALT levels and ALT unqualified rates, showing distinct regional characteristics. ALT elevation in voluntary blood donors is related to non-pathological factors such as gender, age, and dietary habits, but not to infectious indicators.

Premature ejaculation refers to a sexual dysfunction in which men experience a short intravaginal ejaculation latency and a lack of control over ejaculation during sexual activity. The onset of this condition is often accompanied by anxiety and depression, which can seriously affect the quality of the patient′s sexual life and the relationship between partners. Based on the "integration of body and spirit" theory in traditional Chinese medicine, our team believes that this condition is a comorbidity of physical and spiritual factors. We propose that the core pathogenesis of this disease lies in the "loss of form and essence, impairment of spirit, and depression of the mind, "while the primary treatment principle involves "nourishing form and regulating spirit." As a result, a new diagnosis and treatment approach of "four-dimensional integration" is summarized in this study. The disease is treated through the four dimensions of shape, body, spirit, and emotion. Traditional Chinese medicine is used to adjust the shape in cases where the physical form is damaged. For individuals with depression of heart and liver qi, the treatment focuses on soothing the heart and smoothing liver qi, and the modified Wangyou Powder and Xuanzhi Decoction is used. In cases where the heart and kidney function are compromised, the treatment involves nourishing both the heart and kidney while restoring interaction between the heart and the kidney, and modified Jihuo Yansi Elixir is used. To reduce the sensitivity of the glans penis, the patient′s body is washed with a traditional Chinese medicine formula, and a delicate fumigation formula is decocted for external washing. For those who are not in tune with their god, psychological counseling can be used to regulate their spirit and advocate "self-partner" and psychotherapy. If there are issues with intimacy, partners should focus on cooperating during foreplay, sexual intercourse, and post-coital interactions. Overall, the treatment aims to harmonize the body and spirit, addressing both physical and psychological factors through a comprehensive, multi-dimensional approach. This method provides new perspectives and ideas for the clinical diagnosis and treatment of this condition.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Purpose: This Phase II trial was objected to evaluate the efficacy and safety of adding fulvestrant to neoadjuvant chemotherapy in patients with estrogen receptor (ER)+/human epidermal growth factor receptor 2 (HER2)– locally advanced breast cancer (LABC). Additionally, the study aimed to investigate the association of 16α-18F-fluoro-17β-fluoroestradiol (18F-FES) positron emission tomography (PET)–computed tomography (CT) and metabolites with efficacy. Materials and Methods: Fulvestrant and EC-T regimen were given to ER+/HER2– LABC patients before surgery. At baseline, patients received 18F-FES PET-CT scan, and plasma samples were taken for liquid chromatography–mass spectrometry analysis. The primary endpoint was objective response rate (ORR). Secondary endpoints included total pathologic complete response (tpCR) and safety. Results: Among the 36 patients enrolled, the ORR was 86.1%, the tpCR rate was 8.3%. The incidence of grade ≥ 3 treatment-emergent adverse events was 22%. The decrease in ER value in sensitive patients was larger than that in non-sensitive patients, as was Ki-67 (p < 0.05). The maximum standardized uptake value, mean standardized uptake values, total lesion ER expression of 18F-FES PET-CT in sensitive patients were significantly higher than those in non-sensitive patients (p < 0.05). Moreover, these parameters were significantly correlated with Miller and Payne grade and the change in ER expression before and after treatment (p < 0.05). Thirteen differential expressed metabolites were identified, which were markedly enriched in 19 metabolic pathways. Conclusion This regimen demonstrated acceptable toxicity and encouraging antitumor efficacy. 18F-FES PET-CT might serve as a tool to predict the effectiveness of this therapy. Altered metabolites or metabolic pathways might be associated with treatment response.