Background As one of the primary operational methods in the power grid industry, the insulated glove working method imposes significant physical demands due to the constraints of insulating equipment and specific required postures, resulting in substantial occupational health hazards among workers in this sector, which have garnered widespread social attention. Objective To investigate the prevalence and influencing factors of work-related musculoskeletal disorders (WMSDs) in the neck, shoulder, and lumbar regions among workers wearing insulated gloves, and to provide targeted measures to reduce occupational hazards. Methods Using stratified cluster sampling, 1079 frontline workers were randomly selected from power supply enterprises across 3 provinces in China. The revised Chinese version of the Musculoskeletal Disorders Questionnaire was used to investigate the 1-year prevalence of WMSDs in the neck, shoulder, and lumbar regions among workers wearing insulated gloves, and to collect factors associated with multi-site WMSDs (defined as involvement of ≥2 sites among the neck, shoulder, and lumbar). Results The 1-year prevalence of WMSDs in the neck, shoulder, and lumbar regions was 39.9%, 30.0%, and 25.3%, respectively, with a multi-site WMSDs prevalence of 32.0%. Multiple logistic regression analysis showed that, compared to workers with technical secondary school education or senior high school education and below, workers with junior college education or bachelor’s degrees and above had a higher risk of multi-site WMSDs (OR=2.12, 95%CI: 1.47, 3.06). Compared to workers with <10 years of work experience, those with 10-<20 years of work experience had a higher risk of multi-site WMSDs (OR=1.96, 95%CI: 1.45, 2.67). Working in uncomfortable postures "sometimes" (OR=1.64, 95%CI: 1.14, 2.36), "frequently" (OR=2.75, 95%CI: 1.76, 4.29), and "very frequently" (OR=3.55, 95%CI: 2.04, 6.19) were significantly associated with an increased risk of multi-site WMSDs compared to never working in such postures. Frequent repetitive movements of the low back (OR=2.05, 95%CI: 1.48, 2.84) increased the risk of multi-site WMSDs, while sufficient rest time decreased the risk (OR=0.45, 95%CI: 0.34, 0.61). Conclusion The prevalences of single-site and multi-site WMSDs in the neck, shoulder, lumbar regions are relatively high among workers wearing insulated gloves. Factors associated with multi-site WMSDs include 10-<20 years of work experience, junior college education or bachelor’s degrees and above, uncomfortable working postures, frequent repetitive low-back movements, and lack of sufficient rest time.

Background As one of the primary operational methods in the power grid industry, the insulated glove working method imposes significant physical demands due to the constraints of insulating equipment and specific required postures, resulting in substantial occupational health hazards among workers in this sector, which have garnered widespread social attention. Objective To investigate the prevalence and influencing factors of work-related musculoskeletal disorders (WMSDs) in the neck, shoulder, and lumbar regions among workers wearing insulated gloves, and to provide targeted measures to reduce occupational hazards. Methods Using stratified cluster sampling, 1079 frontline workers were randomly selected from power supply enterprises across 3 provinces in China. The revised Chinese version of the Musculoskeletal Disorders Questionnaire was used to investigate the 1-year prevalence of WMSDs in the neck, shoulder, and lumbar regions among workers wearing insulated gloves, and to collect factors associated with multi-site WMSDs (defined as involvement of ≥2 sites among the neck, shoulder, and lumbar). Results The 1-year prevalence of WMSDs in the neck, shoulder, and lumbar regions was 39.9%, 30.0%, and 25.3%, respectively, with a multi-site WMSDs prevalence of 32.0%. Multiple logistic regression analysis showed that, compared to workers with technical secondary school education or senior high school education and below, workers with junior college education or bachelor’s degrees and above had a higher risk of multi-site WMSDs (OR=2.12, 95%CI: 1.47, 3.06). Compared to workers with <10 years of work experience, those with 10-<20 years of work experience had a higher risk of multi-site WMSDs (OR=1.96, 95%CI: 1.45, 2.67). Working in uncomfortable postures "sometimes" (OR=1.64, 95%CI: 1.14, 2.36), "frequently" (OR=2.75, 95%CI: 1.76, 4.29), and "very frequently" (OR=3.55, 95%CI: 2.04, 6.19) were significantly associated with an increased risk of multi-site WMSDs compared to never working in such postures. Frequent repetitive movements of the low back (OR=2.05, 95%CI: 1.48, 2.84) increased the risk of multi-site WMSDs, while sufficient rest time decreased the risk (OR=0.45, 95%CI: 0.34, 0.61). Conclusion The prevalences of single-site and multi-site WMSDs in the neck, shoulder, lumbar regions are relatively high among workers wearing insulated gloves. Factors associated with multi-site WMSDs include 10-<20 years of work experience, junior college education or bachelor’s degrees and above, uncomfortable working postures, frequent repetitive low-back movements, and lack of sufficient rest time.

Background A large number of power supply workers are involved in live working and are exposed to multiple risk factors for long periods of time during outdoor work, which in turn causes occupational health problems. Objective To identify potential ergonomic factors related to work-related musculoskeletal disorders (WMSDs) and estimate the ergonomic risk of electricians. Methods A total of 31 workers were randomly selected from a training base under a power supply enterprise in Guangxi, and their operation processes were recorded by video. Using the Rapid Upper Limb Assessment (RULA) method, the workers were scored by the posture of their arms, neck, and torso during operation, and the final scores were summarized to assess their risk level. Two independent samples t-tests were used to compare the differences in RULA scores. Results A total of 31 videos for mounting/dismounting insulation mask and 29 videos for breaking/connecting contact terminal were collected. The RULA score for mounting/dismounting insulation mask was 6.6 ± 0.7 (left side) and 7.0 ± 0.2 (right side), most of the workers had a score of 7 (71.0% on the left side and 96.8% on the right side), and the upper limb and overall scores on the right side were higher than those on the left side (P < 0.05). The RULA score for breaking/connecting contact terminal was 6.9 ± 0.4 (both right and left sides), most of workers had a score of 7 (89.7% on the left side and 93.1% on the right side), and the difference of the overall scores between the right and left side for this operation were not statistically significant (P > 0.05). The ergonomic risk levels for both operations were level 3 or higher. Conclusion Mounting/dismounting insulation mask and breaking/connecting contact terminal are typical upper limb operations, and have a high level of ergonomics risk, requiring effective preventive and protective measures.

Objective To analyze the law of acupoint selection and compatibility of acupuncture and moxibustion and the application law of acupuncture and moxibustion in the treatment of lactational mastitis using complex network technology.Methods The clinical research literature about acupuncture and moxibustion treatment of lactational mastitis was retrieved from CNKI,CBM,Wanfang Data,VIP and PubMed from the establishment of the databases to March 15,2025.The literature was screened according to the standards to build a prescription database of acupuncture and moxibustion treatment of lactational mastitis.SPSS Modeler 18.0 software was used to analyze association rules,and Gephi 0.9 software was used for complex network analysis.Results A total of 108 articles were included.141 acupuncture and moxibustion prescriptions were extracted,involving 74 acupoints,with a total use frequency of 677 times.The high-frequency acupoints were Jianjing,Danzhong,Rugen,Zusanli,Neiguan,etc.Specific acupoints were mainly composed of Wushu acupoints(169 times,21.10%);the acupoints were mainly distributed in the limbs(36);the most frequently used meridian was stomach meridian(168 times,24.82%).The combination of acupoints with the highest correlation was Jianjing-Neiguan-Rugen.Complex network analysis identified 22 core acupoints,with the most commonly used acupuncture method being filiform needle acupuncture(79 times).Conclusion Acupuncture and moxibustion treatment of lactational mastitis pays special attention to the selection of stomach meridian.The compatibility mode is mainly from top to bottom,and the corresponding acupoints are selected according to syndrome differentiation.

Objective To analyze the law of acupoint selection and compatibility of acupuncture and moxibustion and the application law of acupuncture and moxibustion in the treatment of lactational mastitis using complex network technology.Methods The clinical research literature about acupuncture and moxibustion treatment of lactational mastitis was retrieved from CNKI,CBM,Wanfang Data,VIP and PubMed from the establishment of the databases to March 15,2025.The literature was screened according to the standards to build a prescription database of acupuncture and moxibustion treatment of lactational mastitis.SPSS Modeler 18.0 software was used to analyze association rules,and Gephi 0.9 software was used for complex network analysis.Results A total of 108 articles were included.141 acupuncture and moxibustion prescriptions were extracted,involving 74 acupoints,with a total use frequency of 677 times.The high-frequency acupoints were Jianjing,Danzhong,Rugen,Zusanli,Neiguan,etc.Specific acupoints were mainly composed of Wushu acupoints(169 times,21.10%);the acupoints were mainly distributed in the limbs(36);the most frequently used meridian was stomach meridian(168 times,24.82%).The combination of acupoints with the highest correlation was Jianjing-Neiguan-Rugen.Complex network analysis identified 22 core acupoints,with the most commonly used acupuncture method being filiform needle acupuncture(79 times).Conclusion Acupuncture and moxibustion treatment of lactational mastitis pays special attention to the selection of stomach meridian.The compatibility mode is mainly from top to bottom,and the corresponding acupoints are selected according to syndrome differentiation.

Objective:To explore the feasibility and accuracy of three-dimensional (3D) modeling methods based on ultrasound imaging data for normal and abnormal fetal cardiac structures, and to construct a methodology system for 3D printing of fetal heart based on ultrasound.Methods:A total of 93 fetuses examined in Tangdu Hospital of Air Force Military Medical University from January to December 2019 were selected. Fetal echocardiography was obtained using spatio-temporal image correlation (STIC). Ninety-three hearts were 3D modeled by blood flow modeling, blood pool modeling and cavity modeling, and printed by stereolithography technique. The data measured on the 3D digital models and 3D printed solid models were compared with the corresponding fetal echocardiographic images respectively in order to evaluate the accuracy of the modeling methods.Results:The fetal cardiac blood flow models based on Doppler flow image data showed the malformation and trend of small blood vessels. The fetal cardiac structure models printed based on blood pool modeling displayed the malformation of heart and large blood vessels. Models printed based on cavity modeling method accurately displayed valve and structural defects.For 83 normal fetal hearts, the long diameters of left and right ventricles measured on echocardiography [(15.3±1.9)mm, (13.2±1.9)mm] were compared with those measured on digital models [(15.1±1.9)mm, (12.9±1.9)mm] and 3D printed models[(15.1±1.9)mm, (13.0±1.9)mm], respectively, and there were no significant differences between any two groups of them ( P>0.05). Bland-Altman showed good consistency for all measurements within and between operators. Conclusions:The three modeling methods, including blood flow modeling, blood pool modeling and cavity modeling, have their own advantages in displaying different types of fetal heart malformations. Appropriate modeling methods should be selected for 3D modeling and printing to make up for the limitations of single modeling method. The consistency between measurements on 3D models and those on echocardiography is high, and the repeatability between operators is good.