ObjectiveTo investigate the mechanism of salt processing of Psoraleae Fructus （PF） through modern analytical techniques and biotechnology， focusing on its effects related to hepatotoxicity and anti-osteoporosis activity. MethodsThe zebrafish model was utilized to evaluate the impact of PF and salt-processed Psoraleae Fructus （SPF） on the hepatotoxicity （using 134.17 ， 178.89， 268.34 mg·L^-1 as low， medium， and high dose groups of PF， 135.04， 180.06， 270.08 mg·L^-1 as low， medium， and high dose groups of SPF， respectively） and anti-osteoporotic activity （using 33.54 ， 67.08 and 134.17 mg·L^-1 as low， medium， and high dose groups of PF， 33.76， 67.52， 135.04 mg·L^-1 as low， medium， and high dose groups of SPF， respectively）， which was using alizarin red skull staining of zebrafish as an indicator of different batches of PF. The specific dosage of a batch of PF was taken as an example. Then ultra-performance liquid chromatography-quadrupole-time of flight-mass spectrometry（UPLC-Q-TOF-MS） analysis was employed to identify the chemical composition of PF before and after salt processing， and PCA， OPLS-DA， and independent sample t-test were used to elucidating the compositional changes associated with the effects of salt processing on hepatotoxicity and anti-osteoporosis activity. ResultsUnder specific conditions， PF induced notable hepatotoxicity in zebrafish while simultaneously demonstrating protective effect against prednisolone-induced osteoporosis. In comparison to PF， SPF showed alleviated hepatotoxicity while retaining significant anti-osteoporosis activity. UPLC-Q-TOF-MS analysis revealed that after salt processing， the overall chemical composition of PF showed a downward trend， with 69 components showing a decrease in content， represented by psoralen， and 13 components showing an increase， represented by 4′-O-methyl psoralen B. Further multivariate statistical analysis revealed 11 key differential components before and after salt processing of PF， including psoralen and bakuchiol. ConclusionSalt processing effectively diminishes hepatotoxicity without impairing therapeutic efficacy against osteoporosis of PF， which may be related to the compositional changes before and after salt processing of PF and provides key evidence to reveal the scientific significance of salt processing of PF.

Objective: To evaluate the application of blood conservation measures in obstetric patients with different red blood cell transfusion volumes and to assess the impact of different transfusion volumes on postpartum outcomes. Methods: A retrospective investigation was conducted on 448 obstetric patients who received blood transfusions at the Shanghai General Hospital, Shanghai Jiao Tong University School of Medicine from January 2016 to December 2022. Patients were divided into four groups (1-2 units group, 3-4 units group, 5-6 units group, and >6 units group) based on the volumes of red blood cells (RBCs) transfused during and within 7 days after delivery. The maternal physiological indicators, pre- and postpartum laboratory test indicators, obstetric complications, application of blood conservation measures, use of blood products, and postpartum outcomes were reviewed. The clinical characteristics, application of blood conservation measures, and their impact on postpartum outcomes were compared among different transfusion groups. Results: There were statistically significant differences in the multivariate logistic analysis of history of previous cesarean section (OR=1.781), eclampsia/pre-eclampsia/(OR=1.972) and postpartum blood loss>1 000 mL（OR=1.699）(P<0.05) among different transfusion groups. In terms of blood conservation measures, the more RBCs transfused, the higher the rate of mothers receiving blood conservation measures such as balloon occlusion, arterial ligation, autologous blood transfusion with a cell saver, and hysterectomy. With the increase in the volume of RBCs transfusion, the demand for fresh frozen plasma（FFP）, cryoprecipitate, and platelet transfusions also increased. The hospitalization days for the four groups of parturients were 6.0 (4.0-9.0), 7.5 (5.0-14.8), 7.0 (4.5-13.0) and 11.0 (9.0-20.5), respectively (P<0.05) and the rates of ICU transfer were 2.0% (5/250), 9.4% (12/128),18.2% (6/33) and 51.4% (19/37), respectively (P<0.05). Both increased significantly with the increase in the volume of RBCs transfusion, and the differences between groups were statistically significant. Conclusion: Parturients who received higher volume of RBCs had multiple risks factors for bleeding before childbirth, had higher postpartum blood loss, and had a higher rate of application of various blood conservation measures. In addition, an increase in the volume of RBCs transfusion may have adverse effects on postpartum recovery.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Hypercoagulable state (HCS) after kidney transplantation is one of the common and serious complications in kidney transplant recipients, which has attracted increasing attention in recent years. HCS refers to the abnormal and excessive activation of blood coagulation function, leading to the increased risk of thrombosis. After kidney transplantation, the combined effects of hemodynamic changes, surgical trauma and severe rejection increase the incidence of HCS, not only raising the risk of thrombosis but also potentially causing graft failure and affecting the postoperative survival rate of patients. This article reviews the influencing factors, clinical manifestations, diagnostic methods and preventive strategies of HCS after kidney transplantation, aiming to provide a theoretical basis for optimizing perioperative management and improving the prognosis of patients.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

OBJECTIVE To optimize the salt-processing technology for Anemarrhena asphodeloides. METHODS Taking soaking time， stir-frying temperature， and stir-frying time as factors， Box-Behnken response surface methodology was employed to optimize the salt-processing technology of A. asphodeloides using the contents of mangiferin， neomangiferin， isomangiferin， timosaponin BⅡ， timosaponin AⅢ， timosaponin BⅢ， total flavonoids， and total saponins as evaluation indicators. The entropy weight method was applied to determine the weight of each indicator and calculate the comprehensive score. Based on the 17 sets of Box-Behnken response surface methodology results， a genetic algorithm （GA）-back propagation （BP） neural network was used to further optimize the salt-processing technology， with soaking time， stir-frying temperature， and stir-frying time as input layers and the comprehensive score as the output layer. The salt-processing parameters obtained from the two methods were validated and compared to determine the optimal salt-processing technology for A. asphodeloides. RESULTS The optimal salt-processing conditions obtained via the Box-Behnken response surface methodology were as follows： soaking time of 23 min， stir-frying temperature of 160 ℃ ， and stir-frying time of 12 min， yielding a comprehensive score of 63.370 2. The GA-BP neural network optimization resulted in the following conditions： soaking time of 24 min， stir-frying temperature of 163 ℃， and stir-frying time of 12 min， with a comprehensive score of 65.163 8. The GA-BP neural network optimization outperformed the results obtained by Box-Behnken response surface methodology. CONCLUSIONS This study successfully optimized the salt-processing technology for A. asphodeloides. Specifically， the technology involves adding 15 mL of 0.1 g/mL saline solution to 50 g of the herbal slices， allowing them to moisten for 24 minutes， and then stir-frying at 163 ℃ for 12 minutes.

Bacteriophages possess the ability to infect and kill bacteria and have now been applied in various oral diseases,providing new insights for the prevention and treatment of oral diseases.They are expected to become a novel biological antibacterial agent for treating oral diseases.This paper comprehensively discusses the application of bacteriophages in oral medicine from six aspects:the concept and application prospects of bacteriophages,four common infectious diseases of the oral cavity and their pathogenic bacteria,existing treatment methods,and the application and outlook of bacteriophages in these diseases.Lay a theoretical basis for the clinical implementation of phage therapy.