Process analytical technology(PAT) is a key means for digital transformation and upgrading of the traditional Chinese medicine(TCM) manufacturing process, serving as an important guarantee for consistent and controllable TCM product quality. Near-infrared(NIR) spectroscopy has become the core technology for measuring the TCM manufacturing process. By incorporating NIR spectroscopy into PAT and starting from the construction of a smart platform for the TCM manufacturing process, this paper systematically described the development history and innovative application of the combination of NIR spectroscopy with chemometrics in measuring the TCM manufacturing process by the research team over the past two decades. Additionally, it explored the application of a validation method based on accuracy profile(AP) in the practice of NIR spectroscopy. Furthermore, the software development progress driven by NIR spectroscopy supported by modeling technology was analyzed, and the prospect of integrating NIR spectroscopy in smart factory control platforms was exemplified with the construction practices of related platforms. By integrating with the smart platform, NIR spectroscopy could improve production efficiency and guarantee product quality. Finally, the prospect of the smart platform application in measuring the TCM manufacturing process was projected. It is believed that the software development for NIR spectroscopy and the smart manufacturing platform will provide strong technical support for TCM digitalization and industrialization.
Spectroscopy, Near-Infrared/methods* ; Drugs, Chinese Herbal/analysis* ; Software ; Medicine, Chinese Traditional ; Quality Control

OBJECTIVE: To explore the expression regulation of lipid metabolism gene ABHD5 in testes. METHODS: Differential gene analysis was performed by integrating databases of TCGA and GTEx to identify the target gene ABHD5. The expression trends of ABHD5 gene in testicular carcinoma tissue were analyzed. Human testis single-cell atlases were obtained from the Human Protein Atlas and Male Health Atlas databases to determine the expression distribution of ABHD5 across different testicular cell types. Additionally, the GTEx database was utilized to visualize the expression pattern of ABHD5 in the testis, thereby enhancing the understanding of its transcriptional profile. The relationship between ABHD5 expression and age was assessed through integrated database analysis. Western blotting and immunofluorescence were performed to detect differential expressions of ABHD5 in testicular tissues of young and aged mice respectively. RESULTS: The TCGA database indicated that the expression of ABHD5 in human testicular carcinoma tissue was significantly lower than that in normal testicular tissue which showed a negative correlation with patient survival. ABHD5 was highly expressed in germ cells of the testis reveaked from Human Protein Atlas and Male Health Atlas databases. The stability of ABHD5 protein was crucial for testicular tissue, and its expression decreased with age. Furthermore, Western blot and immunofluorescence staining demonstrated that ABHD5 expression in the testicular tissue of aged mice was significantly lower than that in young mice. CONCLUSION ABHD5 plays an important role in testicular tissue, and may be inseparable from testicular tumors and reproductive aging. However, its mechanism of action remains to be further studied.
Male ; Animals ; Mice ; Testis/metabolism* ; Humans ; Lipid Metabolism/genetics* ; 1-Acylglycerol-3-Phosphate O-Acyltransferase/metabolism* ; Testicular Neoplasms/metabolism*

During the progression of heart failure(HF),abnormal transduction of the transforming growth factor-β(TGF-β)/Smads signaling pathway is important mechanism of myocardial fibrosis(MF)in HF.TGF-β,a key factor in MF,is in an overexpression state in the process of MF in HF,and Smads is a major effector downstream of TGF-β.The TGF-β/Smads pathway induces abnormal proliferation of myofibroblasts,aggravates myocardial extracellular matrix deposition,and reduces the ability of the cardiac tissues to resist fibrosis,which plays a complex role in the pathogenesis of MF in HF.Traditional Chinese medicine(TCM)has the efficacy of unequivocal inhibiting myocardial collagen deposition,anti-MF,protecting the myocardium and improving cardiac function in the prevention and treatment of MF in HF and so on,and the TGF-β/Smads pathway is one of the key pathways through which TCM monomers,TCM combinations,and proprietary medicines can exert their cardioprotective effects on the HF.This paper reviews the existing experimental research results of TCM intervening in the TGF-β/Smads pathway for the treatment of MF in HF over the past 10 years,with a view to providing theoretical basis for the prevention and treatment of HF MF well as the development and of new drugs.

Objective:To assess the deformation of the bladder-neck opening and the impact of the bladder-neck angle(BNA)on urination in male patients by fluid-structure interaction(FSI)analysis.Methods:We established geometric models of the blad-der,prostate and urethra were established,incorporating both normal and enlarged BNAs,and assessed the effects of BNA alteration on urinary flow by FSI simulation of the flow rate and pressure of the urine within the bladder,bladder neck and urethra,and that of pros-tate displacement as well.We retrospectively analyzed the clinical data on 145 male patients from the Second Hospital of Hebei Medical University between June 2020 and June 2023,39 with acute urine retention(the AUR group)and 106 without(the non-AUR group),and evaluate the impact of BNA on urination based on the urinary flow rate and prostate volume.Results:Comparative simulation a-nalysis showed significant differences in the total urethral pressure and flow rate between the normal and enlarged BNA models(P＜0.05).The maximum prostate displacement was found at the bladder neck,with moderate displacement and unchanged urethral diame-ter in the normal BNA model,but significant displacement and a reduced urethral opening diameter in the enlarged BNA model.FSI analysis confirmed an evident impact of enlarged BNA on urination,more significant in the AUR than in the non-AUR patients(P＜0.05).The BNAs in the patients with the maximum urinary flow rate(Qmax)of＜10,10-15 or＞15 ml/s were 83.7°±2.5°,67.5°±1.8° and 65.1°±4.8° respectively,with statistically significant difference between the former one and the latter two groups(P＜0.05).The BNAs in the patients with normal prostate volume or BPH of grade Ⅰ,Ⅱ,Ⅲ or Ⅳ were 65.0°±3.7°,67.2°±3.1°,71.5°±2.0°,82.8°±3.5° and 105.8°±6.0°,respectively(P＜0.05),with statistically significant difference between BPH grades Ⅲ and Ⅳ(P＜0.05)as well as between these two and the other three groups(P＜0.05),but not among the normal prostate volume,BPH grade Ⅰ and BPH grade Ⅱ groups(P＞0.05).Spearman correlation analysis indicated that BNA was strongly correlated with total prostate volume(TPV),transition zone volume(TZV),intravesical prostatic protrusion(IPP),prostatic urethral angle(PUA),IPSS,and Qmax(P＜0.05).Conclusion:Changes in BNA affect urination and are closely associated with the se-verity of prostate hyperplasia.The BNA may be an important anatomical factor for assessing the severity of lower urinary tract symptoms in BPH patients.

Objective:To explore the clinical application of Hisense Computer-Assisted Sur-gery System(CAS)in the perioperative period of hepatectomy for liver cancer.Methods:Clinical data of patients undergoing laparoscopic hepatectomy(LH)for liver cancer from January 2021 to December 2022 were collected.Patients were divided into three groups based on surgical difficulty(low,medium,high)and further stratified into CAS-assisted subgroup and control subgroup ac-cording to whether the CAS system was used.Demographic and perioperative data were com-pared among different groups.Results:A total of 317 patients'clinical data were collected,in-cluding 31 cases in the low difficulty group,132 cases in th medium difficulty group,and 154 cases in the high difficulty group,with 108 cases(34.1％)in the CAS-assisted subgroup and 209 cases(65.9％)in the control group.In the medium difficulty group,the CAS-assisted subgroup had shorter operation time,drainage tube duration,and postoperative hospital stay compared to the control group(P＜0.001),and the AFP levels at 1 month postoperatively in the CAS-assisted sub-group were lower than those in the control group(P＜0.001).In the high difficulty group,the CAS-assisted subgroup showed shorter operation time,drainage tube duration,and postoperative hospi-tal stay,less intraoperative blood loss,and lower AFP levels 1 month post-operation compared to the control group(P＜0.001 for all).Conclusion:Preoperative CAS in medium and high difficulty laparoscopic liver resections improves perioperative outcomes.Hisense CAS effectively assists general surgeons in accurately identifying the anatomical site of liver tumors,providing precise pre-operative simulation and intraoperative navigation,thereby optimizing surgical strategies for pa-tients.

Objective To propose a Q factor-based fatigue vibration evaluation method of the ultrasonic knife tip.Methods Firstly,an ultrasonic cutter fatigue testing table was established to realize repeated cutting,which was composed of a power supply module,a three-axis moving module,an ultrasonic cutter clamping module and a control module.Secondly,10 ultrasonic knives of some brand underwent fatigue testing with the table,during which non-contact measurement of the ultrasonic knife tip vibration was carried out and the Q factors were calculated at the five periods of the fatigue test,including the periods before cutting,after 500 times of cutting,after 1 000 times of cutting,after 2 000 times of cutting and after 3 000 times of cutting.Finally,the average cutting speed and burst pressure for coagulated vessels were computed at each period to validata the effectiveness of the method proposed.Results It's indicated that Q factor could effectively reflect the fatigue degradation of the ultrasonic knife tip,while the average cutting speed and burst pressure for coagulated vessels were difficult to efficiently evaluate the fatigue degradation level of the ultrasonic knife tip due to the uncertainty factors in the measurement process.Conclusion The proposed Q factor-based evaluation method can directly evaluate fatigue vibration of the ultrasonic knife tip in an accurate and quantitative manner.[Chinese Medical Equipment Journal,2024,45(6):17-22]

Objective To carry out accurate quantative evaluation of MRI scanning noise based on laser vibrometry technology.Methods Skull and spine MRI was performed with mute and conventional sequences.A laser vibrometry device was used to sample the surface vibration noise at the outer edge of the inspection hole of MRI system according to GB/T 16539-1996 Acoustics—Determination of sound power levels of noise sources using vibration velocity—Measurement for seal machinery,and the indicators of sound power level,sound pressure level and perceived noise level obtained by the three calculation methods(LPN1,LPN2 and LPN3)were analyzed with some dedicated MRI noise analysis software.Results The peak sound pressure levels for conventional and mute sequences of skull scanning were 81 and 63 dB(A),respectively,and mute sequence reduced the noise level significantly;the peak sound pressure levels for conventional and mute sequences of spine scanning were 79 and 75 dB(A),respectively,and the noise reduction level was significantly lower than that of skull scanning.Significant differences in noise reduction were not found in spine scanning sequences,while were found in skull scanning sequences.During spine and skull scanning LPN1,LPN2 and LPN3 obtained by the three calculation methods of conventional and mute sequences were all higher than the overall sound power and overall pressure levels obviously.Conclusion Mute sequence can not realize linear noise reduction for the whole frequency band,the perceived noise of the human ear during MRI scanning is related directly to the scanning sequence,and there may be some bias when only one physical indicator is involved in the noise evaluation of MRI system.[Chinese Medical Equipment Journal,2024,45(10):20-24]

Intraperitoneal administration of timosaponin A-III (TA-III) has therapeutic effects on high-fat diet-induced metabolic dysfunction-associated steatotic liver disease (MASLD), but oral administration has no effect. This suggests that gut microbiota may affect the oral bioavailability of TA-III. Metabolic dysfunction-associated steatohepatitis (MASH) is an inflammatory subtype of MASLD. To investigate the therapeutic effect of different administration modes of TA-III on MASH and its relationship with gut microbiota metabolism. In this study, a MASH mouse model was induced by choline-deficient, L-amino acid-defined, high-fat diet (CDAHFD). Comparing the therapeutic effect of intraperitoneal injection (10 mg·kg^-1, ip) and intragastric administration (100 mg·kg^-1, ig) of TA-III. The concentration of TA-III in serum of rats under the two administration modes was analyzed. On this basis, the metabolic effect of gut microbiota on TA-III in mice was verified by the experiment of metabolism of gut microbiota in vitro. The pharmacokinetic experiment of combined antibiotic intervention in mice further verified the metabolism of TA-III by gut microbiota in mice. Finally, the concentration of TA-III in serum of mice after the administration of TA-III by intragastric administration under different antibiotic intervention conditions was compared, and 16S rRNA sequencing analysis was combined to find the key bacteria that may participate in the metabolism of TA-III. The animal welfare and experimental procedures in this paper were in accordance with the provisions of the Animal Ethics Committee of Shanghai University of Traditional Chinese Medicine. The ethics approval number is PZSHUTCM2307030004 and PZSHUTCM2310200003. The results showed that TA-III (10 mg·kg^-1, ip) had definite therapeutic effect on MASH mice, but TA-III (100 mg·kg^-1, ig) was ineffective. The analysis showed that the prototype concentration of TA-III in serum and liver of mice in TA-III (100 mg·kg^-1, ig) was significantly lower than TA-III (10 mg·kg^-1, ip), suggesting that the oral administration of TA-III may be metabolized by gut microbiota. The concentration of TA-III in serum of streptomycin (Str) treated mice was higher than normal mice. Combined with 16S rRNA gene sequencing analysis, it was found that the abundance of Akkermansia_muciniphila (A. muciniphila) was significantly reduced in the Str group. In vitro experiments showed that A. muciniphila could metabolize TA-III. In conclusion, gut microbiota is an important factor affecting the efficacy of TA-III administration through the gastrointestinal tract, in which A. muciniphila may play an important role.

The population aging and the coming of the information era are accompanied with the growing incidence of spinal degenerative diseases, which result in heavy social and economic burdens. Under the guidance of the tendon-bone theory, rich experience has been accumulated in the prevention and diagnosis of spinal degenerative diseases with traditional Chinese medicine(TCM), which demonstrates unique advantages. China's government has placed people's health in the strategic position of development, providing a favorable environment for the realization of healthy aging. The Healthy China 2030 advocates special actions for healthy bones. As China is facing an important period of demographic transition, the Traditional Chinese Medicine for Bone Health Program has emerged, combining the needs of the national health strategy and the advantages of TCM. This paper discusses the background and significance of the program. According to the theory of five body constituents and the characteristics of musculoskeletal system diseases, this paper constructs a theoretical system of "tendon-meridian-muscle-bone-marrow" to explain the structure and function of the musculoskeletal system. From the holistic view of TCM, this system shows not only the structure and function of the musculoskeletal system but also the patterns of disease development and the mechanism of TCM treatment. The system facilitates the research on not only the comorbidities related to bone health but also the occurrence, development, and outcome of diseases. In the management of chronic degenerative diseases, attention should be paid to the establishment and improvement of the disease prevention and control system in addition to the disease treatment alone. Finally, this paper introduces the characteristic advantages of TCM in the whole process of prevention, diagnosis, treatment, rehabilitation, and health maintenance of spinal degenerative diseases, aiming to enrich the connotation of the tendon-bone theory, provide ideas and implementation strategies for TCM clinical practice, and ultimately achieve the effective management of the diagnosis and treatment of spinal degenerative diseases.
Humans ; Medicine, Chinese Traditional ; Spinal Diseases/prevention & control* ; Drugs, Chinese Herbal/therapeutic use* ; China ; Bone and Bones/drug effects*

OBJECTIVE: To investigate the application of 3D printing percutaneous surgical guide plate in closed reduction and cannulated screw internal fixation of femoral neck fracture. METHODS: The clinical data of 12 patients with femoral neck fracture from March 2019 to March 2022 were retrospectively analyzed. Patients were divided into observation group and control group according to different operation plans, with 6 cases in each group. The observation group received percutaneous operation guide plate assisted closed reduction and hollow screw internal fixation, while the control group received closed reduction and hollow compression screw internal fixation. The operation time, intraoperative blood loss, fluoroscopy times, and Kirschner needle puncture times were compared between two groups. The location of screws were recordedon postoperative X-ray films, follow-up time, time of complete fracture healing, Harris score of hip joint and the incidence of complications were recorded on postoperative X-ray films. RESULTS: The operation time of observation group (32.17±6.18) min was shorter than that of control group (53.83±7.31) min (P<0.05). The amount of intraoperative bleeding in the observation group (18.33±2.94) ml was less than that in the control group (38.17±5.56) ml(P<0.05). The times of fluoroscopy in the observation group (7.50±1.05) were less than those in the control group (21.00±4.82) (P<0.05). The number of Kirschner needle punctures (8.00±0.63) in observation group was less than that in control group (32.67±3.08) (P<0.05). The follow-up time was(12.88±0.74) months in observation group and (12.83±0.72) months in control group, there was no significant difference between two groups (P>0.05). One year after operation, Harris score of hip joint in the observation group was(82.00±4.52) points, while that in the control group was(81.00±3.41) points, there was no significant difference between two groups(P>0.05). The time of complete fracture healing in the observation group was (7.50±1.05) months, while that in the control group was (7.67±1.21) months, there was no significant difference between two groups(P>0.05). The parallelism of the screws in the observation group was (0.50±0.11) ° and (0.76±0.15) °, which were lower than that in the control group (1.57±0.31) ° and (1.87±0.21) ° (P<0.05). The screw distribution area ratio (0.13±0.02) cm2 in the observation group was higher than that in the control group (0.08±0.01) cm2 (P<0.05). No complications such as necrosis of femoral head, nonunion of fracture, shortening of femoral neck and withdrawal of internal fixation occurred in both groups. CONCLUSION The application of 3D printing percutaneous surgical guide plate improves the accuracy and safety of closed reduction and cannulated screw internal fixation for femoral neck fracture. It has the advantages of minimally invasive, reducing radiation exposure, fast and accurate, shortening the operation time and reducing intraoperative bleeding.
Humans ; Retrospective Studies ; Treatment Outcome ; Femoral Neck Fractures/surgery* ; Fracture Fixation, Internal ; Bone Screws ; Printing, Three-Dimensional