BACKGROUND:The development of calcium phosphate bone cement is limited due to its poor mechanical properties and weak osteogenic ability.Silicate bioactive glass is highly favored due to its excellent biological activity and osteogenic ability.Simultaneously,fiber structures can enhance the mechanical strength of materials.OBJECTIVE:To investigate the mechanical properties,biocompatibility,and osteogenic effect of silicate bioactive glass fiber composite calcium phosphate bone cement.METHODS:Different mass percentages(0％,10％,and 20％)of silicate bioactive glass fiber were added to the solid phase of calcium phosphate bone cement,mixed with the liquid phase and cured for 48 hours to obtain silicate bioactive glass fiber composite calcium phosphate bone cement.The mechanical properties,setting time,and ion precipitation of the cement were characterized.The three groups of bone cement extracts were co-cultured with MC3T3-E1 cells.The cell compatibility of the materials was evaluated by CCK-8 assay,live/dead staining,and phalloidin staining.After osteogenic induction,the osteogenic induction ability of the materials was evaluated by alkaline phosphatase staining,alizarin red staining,RUNX2 immunofluorescence staining,and RT-PCR.RESULTS AND CONCLUSION:(1)With the increase of silicate bioactive glass fiber content,the compressive strength and flexural strength of bone cement increased,and the setting time was prolonged.When bone cement was immersed in simulated body fluid,the precipitation of silicon ions,calcium ions,and phosphorus ions could be detected.Moreover,with the increase of silicate bioactive glass fiber content,the mass concentration of silicon ions and phosphorus ions released by bone cement increased,and the mass concentration of calcium ions decreased.(2)Live/dead staining and phalloidin staining results exhibited that silicate bioactive glass fiber composite calcium phosphate bone cement had no toxic effect on MC3T3-E1 cells.CCK-8 assay results showed that silicate bioactive glass fiber composite calcium phosphate bone cement could promote the proliferation of MC3T3-E1 cells.(3)With the increase of silicate bioactive glass fiber content in bone cement,the alkaline phosphatase activity and extracellular calcium deposition of MC3T3-E1 cells increased,the expression of RUNX2 protein increased,and the expression of alkaline phosphatase,osteocalcin,osteopontin,and RUNX2 mRNA expression increased.(4)The results indicate that silicate bioactive glass fibers can enhance the mechanical properties and osteogenic induction ability of calcium phosphate bone cement,among which 20％silicate bioactive glass fibers have a more obvious effect.

Objective:To analyze the clinical efficacy and learning curve for robot-assisted cortical bone trajectory (CBT) screw fixation performed by surgeons with different seniority in the treatment of lumbar degenerative disease.Methods:The clinical data of 91 lumbar degenerative disease patients underwent robot-assisted CBT screw fixation from August 2020 to December 2022 in Beijing Shijitan Hospital, Capital Medical University were retrospectively analyzed. Among them, 48 patients underwent surgery performed by the same senior surgeon (senior group), with a total of 234 CBT screws were placed; while 43 patients underwent surgery performed by the same junior surgeon (junior group), with a total of 206 CBT screws were placed. The surgical related indexes, functional improvement score, lower back pain and lower limb radiation pain scores, acceptable nail insertion rate, non invasion rate of facet joints and incidence of postoperative complications were compared between two groups. The functional improvement score was evaluated using the Japanese Orthopaedic Association (JOA) score, the pain score was evaluated using visual analog score (VAS). The cumulative sum (CUSUM) method was used to depict the learning curve with "single screw placement time" as the observation index.Results:There were no statistical difference in incision length, operation time, intraoperative blood loss and postoperative hospital stay between two groups ( P>0.05). The least squares means of JOA scores 1, 3 and 6 months after surgery in both groups increased significantly compared to baseline, while the least squares means of lower back pain VAS and lower limb radiation pain VAS decreased significantly compared to baseline; there were no statistical differences between two groups ( P>0.05). There were no statistical difference in acceptable nail insertion rate, non invasion rate of facet joints and incidence of postoperative complications between two group ( P>0.05). The CUSUM learning curves were fitting well and the inflection point for senior surgeon corresponded to 18 cases, while it was reached after performing surgery on 21 cases for junior surgeon. Conclusions:Robot-assisted CBT screw fixation performed by surgeons with different seniority could achieve similar clinical outcomes for treating lumbar degenerative disease. The senior surgeons are able to complete the initial learning stage faster than the junior surgeons, but there is not much difference in the number of surgeries performed the learning curve.

BACKGROUND:The development of calcium phosphate bone cement is limited due to its poor mechanical properties and weak osteogenic ability.Silicate bioactive glass is highly favored due to its excellent biological activity and osteogenic ability.Simultaneously,fiber structures can enhance the mechanical strength of materials.OBJECTIVE:To investigate the mechanical properties,biocompatibility,and osteogenic effect of silicate bioactive glass fiber composite calcium phosphate bone cement.METHODS:Different mass percentages(0％,10％,and 20％)of silicate bioactive glass fiber were added to the solid phase of calcium phosphate bone cement,mixed with the liquid phase and cured for 48 hours to obtain silicate bioactive glass fiber composite calcium phosphate bone cement.The mechanical properties,setting time,and ion precipitation of the cement were characterized.The three groups of bone cement extracts were co-cultured with MC3T3-E1 cells.The cell compatibility of the materials was evaluated by CCK-8 assay,live/dead staining,and phalloidin staining.After osteogenic induction,the osteogenic induction ability of the materials was evaluated by alkaline phosphatase staining,alizarin red staining,RUNX2 immunofluorescence staining,and RT-PCR.RESULTS AND CONCLUSION:(1)With the increase of silicate bioactive glass fiber content,the compressive strength and flexural strength of bone cement increased,and the setting time was prolonged.When bone cement was immersed in simulated body fluid,the precipitation of silicon ions,calcium ions,and phosphorus ions could be detected.Moreover,with the increase of silicate bioactive glass fiber content,the mass concentration of silicon ions and phosphorus ions released by bone cement increased,and the mass concentration of calcium ions decreased.(2)Live/dead staining and phalloidin staining results exhibited that silicate bioactive glass fiber composite calcium phosphate bone cement had no toxic effect on MC3T3-E1 cells.CCK-8 assay results showed that silicate bioactive glass fiber composite calcium phosphate bone cement could promote the proliferation of MC3T3-E1 cells.(3)With the increase of silicate bioactive glass fiber content in bone cement,the alkaline phosphatase activity and extracellular calcium deposition of MC3T3-E1 cells increased,the expression of RUNX2 protein increased,and the expression of alkaline phosphatase,osteocalcin,osteopontin,and RUNX2 mRNA expression increased.(4)The results indicate that silicate bioactive glass fibers can enhance the mechanical properties and osteogenic induction ability of calcium phosphate bone cement,among which 20％silicate bioactive glass fibers have a more obvious effect.

Objective:To analyze the clinical efficacy and learning curve for robot-assisted cortical bone trajectory (CBT) screw fixation performed by surgeons with different seniority in the treatment of lumbar degenerative disease.Methods:The clinical data of 91 lumbar degenerative disease patients underwent robot-assisted CBT screw fixation from August 2020 to December 2022 in Beijing Shijitan Hospital, Capital Medical University were retrospectively analyzed. Among them, 48 patients underwent surgery performed by the same senior surgeon (senior group), with a total of 234 CBT screws were placed; while 43 patients underwent surgery performed by the same junior surgeon (junior group), with a total of 206 CBT screws were placed. The surgical related indexes, functional improvement score, lower back pain and lower limb radiation pain scores, acceptable nail insertion rate, non invasion rate of facet joints and incidence of postoperative complications were compared between two groups. The functional improvement score was evaluated using the Japanese Orthopaedic Association (JOA) score, the pain score was evaluated using visual analog score (VAS). The cumulative sum (CUSUM) method was used to depict the learning curve with "single screw placement time" as the observation index.Results:There were no statistical difference in incision length, operation time, intraoperative blood loss and postoperative hospital stay between two groups ( P>0.05). The least squares means of JOA scores 1, 3 and 6 months after surgery in both groups increased significantly compared to baseline, while the least squares means of lower back pain VAS and lower limb radiation pain VAS decreased significantly compared to baseline; there were no statistical differences between two groups ( P>0.05). There were no statistical difference in acceptable nail insertion rate, non invasion rate of facet joints and incidence of postoperative complications between two group ( P>0.05). The CUSUM learning curves were fitting well and the inflection point for senior surgeon corresponded to 18 cases, while it was reached after performing surgery on 21 cases for junior surgeon. Conclusions:Robot-assisted CBT screw fixation performed by surgeons with different seniority could achieve similar clinical outcomes for treating lumbar degenerative disease. The senior surgeons are able to complete the initial learning stage faster than the junior surgeons, but there is not much difference in the number of surgeries performed the learning curve.

Objective To establish high performance liquid chromatography(HPLC)characteristic chromatograms of Xinqingduyin Granules(composed of Taraxaci Herba,Lonicerae Japonicae Flos,Chrysanthemi Indici Flos,etc.)and content determination of chicory acid and glycyrrhizic acid,and to optimize the preparation process of Xinqingduyin Granules.Methods Using the characteristic chromatograms of Xinqingduyin and the retention rate of chicory acid and glycyrrhizic acid as indexes,we carried out orthogonal experiment to optimize the extraction process of Xinqingduyin,and studied the concentration process.The molding process of Xinqingduyin Granules was conducted by screening the types and dosage of auxiliary materials,then three batches of pilot experiments were carried out.Results HPLC characteristic chromatograms of Xinqingshuyin Granules and the determination methods of chicory acid and glycyrrhizic acid were established.The optimal preparation technology was as follows:8 times amount of water was added,the drug was decocted for 3 times,with 1 hour per time.After the extract was concentrated under reduced pressure at 80℃,the appropriate amount of steviol glycoside and lactose was added into the extract and mixed.One-step granulation and packaging were adopted.The retention rates of chicoric acid and glycyrrhizic acid in the 3 batches of Xinqingduyin Granules,which were prepared on the pilot scale,were(54.56±1.63)%and(54.96±1.08)%,and the rate of finished product was(87.47±0.49)%,respectively.The quality is uniform,and the characteristic map of Xinqingduyin Granules showed high similarity with that of decoction prepared from the same batch of slices.Conclusion The optimized preparation technology is reasonable,feasible and reproducible.This preparation can be used to obtain the granule with similar materials of Xinqingduyin decoction.

Objective:The investigation and research on the application status of Hepatic Venous Pressure Gradient (HVPG) is very important to understand the real situation and future development of this technology in China.Methods:This study comprehensively investigated the basic situation of HVPG technology in China, including hospital distribution, hospital level, annual number of cases, catheters used, average cost, indications and existing problems.Results:According to the survey, there were 70 hospitals in China carrying out HVPG technology in 2021, distributed in 28 provinces (autonomous regions and municipalities directly under the central Government). A total of 4 398 cases of HVPG were performed in all the surveyed hospitals in 2021, of which 2 291 cases (52.1%) were tested by HVPG alone. The average cost of HVPG detection was (5 617.2±2 079.4) yuan. 96.3% of the teams completed HVPG detection with balloon method, and most of the teams used thrombectomy balloon catheter (80.3%).Conclusion:Through this investigation, the status of domestic clinical application of HVPG has been clarified, and it has been confirmed that many domestic medical institutions have mastered this technology, but it still needs to continue to promote and popularize HVPG technology in the future.

Objective To investigate the type,clinical and imaging features of iatrogenic bile duct injury and the efficacy and safety of endoscopic and interventional radiology therapy.Methods A total of 48 patients with iatrogenic bile duct injury who have undergone endoscopic and/or interventional therapy from January 1st 2013 to June 30th 2016 were enrolled.Patients' general information,causes of injury,clinical manifestations,treatment methods,efficacy and complications were retrospectively analyzed.Results The causes of iatrogenic bile duct injury were cholecystectomy(45.8％,22/48),liver transplantation (35.4％,17/48),transjugular intrahepatic portosystemic shunt (8.3％,4/48),Roux-en-Y anastomosis (6.3％,3/48) and endoscopic retrograde cholangiopancreatography (4.2％,2/48).The most common type of iatrogenic bile duct injury was stenosis of intra/extra bile ducts (66.7％,32/48).Other types included biliary fistula(18.8％,9/48),hemobilia (10.4％,5/48) and stenosis of anastomotic stoma (4.2％,2/48).The most common clinical manifestations were jaundice (37.5％,18/48) and abdominal pain (29.2％,14/48).Other clinical manifestations were fever (14.6％,7/48),hematemesis or melena (8.3％,4/48) and abnormal drainage fluid (8.3％,4/48).Diagnosis was confirmed by angiography,cholangiography or endoscopy.The overall effective rate of minimally invasive therapy was 91.7％ (44/48) and the most common complications were fever (16.7％,8/48) and pancreatitis (10.4％,5/48).Other complications were hemobilia (2.1％,1/48),cardia dilaceration (2.1％,1/48) and biliary fistula caused by catheter shedding(2.1％,1/48).Conclusion Iatrogenic bile duct injury could occur after upper abdominal surgeries,endoscopic or interventional procedures.Early diagnosis and treatment with endoscopic or vascular interventional methods can achieve satisfying efficacy and safety.

Aim To study targeting capability of anti-CD19 (Fab)-LDMto CD19 +B lymphoma cells in vi-vo and in vitro.Methods Flow cytometry was em-ployed to determine the affinity of Cy5 labeled anti-CD19 (Fab)-LDP to human lymphoma Raji cells.And the optical imaging system was used to analyze the dis-tribution of Cy5-anti-CD19 (Fab )-LDP in lymphoma-transplanted xenograft nude mice in vivo.Results The results of flow cytometry demonstrated that Cy5-an-ti-CD19(Fab)-LDP had remarkable affinity with lym-phoma Raji cells;Raji lymphoma xenograft model was established successfully in nude mice and in vivo fluo-rescence imaging analysis indicated that the antibody-drug conjugates could specially be localized in the tar-get tumor.Conclusion The experiments in vivo and vitro confirm that anti-CD19 (Fab)-LDP has remarka-ble affinity to targeting CD19 +lymphoma cells,and the antibody drugs anti-CD19 (Fab )-LDP have the probability to be new drugs for the treatment of malig-nant lymphoma.

The dynamic changes of synchronous 12-lead ECG signal's correlation dimension (D2) of an anesthetized rabbit were investigated primarily under three different pathologic conditions. The results showed that the D2 derived from different lead signals was not a constant whether the rabbit was in normal state or in emergent myocardial infarction condition, it demonstrated distribution characteristic. Compared with the same lead signal, D2 of limb lead almost kept constant, D2 of chest lead got higher when the sphere of emergent ischemia extended larger. D2 showed the potential application in the diagnosis of coronary heart disease.
Animals ; Electrocardiography ; Myocardial Infarction ; physiopathology ; Nonlinear Dynamics ; Rabbits ; Signal Processing, Computer-Assisted