ObjectiveTo identify the pathogen species responsible for the wilt disease of Tetradium ruticarpum in Chongqing， investigate there biological characteristics， and screen effective fungicides， so as to provide a theoretical basis for disease control in production. MethodsThe pathogen was isolated via the tissue culture method. Pathogenicity was verified according to Koch's postulates. The pathogen was identified based on morphological characteristics and multi-gene phylogenetic analysis. The mycelial growth rate method was used for biological characterization of the pathogen and fungicide screening. ResultsThe pathogen colonies were nearly circular with irregular edges， white， short， velvety aerial hyphae， and pale purple undersides. Macroconidia were colorless， sickle-shaped， with 3-5 septa， while microconidia were transparent， elliptical， aseptate or with 1-2 septa. Multi-gene phylogenetic analysis showed that the pathogen clustered in the same clade as Fusarium fujikuroi with 100% support， which， combined with morphological characteristics， identified the pathogen causing wilt of T. ruticarpum in Chongqing as F. fujikuroi. The optimal conditions for the mycelial growth of F. fujikuroi were mung bean agar （MBA） with glucose as the carbon source， beef extract and yeast powder as nitrogen sources， 28 ℃， pH 7.0， and alternating light/dark conditions. The optimal conditions for sporulation were potato dextrose agar （PDA） with glucose as the carbon source， beef extract as the nitrogen source， 28 ℃， pH 7.0， and complete darkness. Among chemical fungicides， phenazine-1-carboxylic acid exhibited the strongest inhibitory effect on F. fujikuroi. Shenqinmycin and tetramycin were the most effective bio-fungicides. ConclusionThis study is the first to report F. fujikuroi as the causal agent of wilt disease in T. rutaecarpa. The chemical fungicide phenazine-1-carboxylic acid and the bio-fungicides shenqinmycin and tetramycin showed strong inhibitory effects against F. fujikuroi.

Myosteatosis is one of the common complications in patients with end-stage liver disease, which is significantly associated with poor outcomes after liver transplantation. Currently, diagnostic criteria of myosteatosis have not been established, and CT is the most commonly used for diagnosis. The pathogenesis of myosteatosis is multifactorial, and the pathophysiological mechanisms linking it to end-stage liver disease are not fully understood. An increasing number of scholars have recognized that the severity of myosteatosis is closely related to its clinical consequences, but there are no effective treatment options available. This article reviews the pathophysiological mechanisms and diagnostic methods of myosteatosis, and its impact on the prognosis of liver transplant recipients, and discusses current treatment strategies to provide references for the perioperative management of liver transplant recipients.

ObjectiveTo investigate the mechanisms by which Renshentang treats atherosclerosis （AS） in mice， focusing on the regulation of endothelial inflammatory responses mediated by transient receptor potential vanilloid subtype 1 （TRPV1）. MethodsAn AS model was established in apolipoprotein E knockout （ApoE^-/-） mice fed a high-fat diet. The mice were randomly divided into a simvastatin group （0.02 g·kg^-1·d^-1） and low-， medium-， and high-dose Renshentang groups （1.77， 3.54， 7.08 g·kg^-1·d^-1）， with 12 mice in each group. ApoE^-/- mice were fed a high-fat diet and treated simultaneously. C57BL/6J mice fed a normal diet served as the normal group （n=9）. After continuous administration for 12 weeks， mice were anesthetized and the aortas were collected. Oil Red O staining was used to observe lipid plaque formation in the aorta. Hematoxylin-eosin （HE） staining was performed to examine pathological changes in the aortic root. Immunohistochemistry was used to analyze the levels of pro-inflammatory factors tumor necrosis factor-α （TNF-α） and interleukin-1β （IL-1β）， as well as the expression of TRPV1， phosphorylated phosphoinositide 3-kinase （p-PI3K）， and phosphorylated protein kinase B （p-Akt） in the aortic root. Real-time quantitative polymerase chain reaction （Real-time PCR） was used to detect endothelial nitric oxide synthase （eNOS） mRNA expression in the aorta， and Western blot was used to detect TRPV1 protein expression. ResultsCompared with the normal group， the model group showed a significant increase in aortic plaque formation （P<0.01） and significantly elevated levels of TNF-α and IL-1β in the aortic root （P<0.01）. The expression levels of TRPV1， p-PI3K， and p-Akt were decreased （P<0.05， P<0.01）， and eNOS mRNA expression was reduced （P<0.05， P<0.01）. Compared with the model group， all Renshentang groups significantly reduced aortic plaque formation （P<0.01）， significantly decreased TNF-α and IL-1β levels （P<0.01）， and markedly increased the expression levels of TRPV1， p-PI3K， p-Akt， and eNOS mRNA （P<0.05， P<0.01）. ConclusionRenshentang may inhibit endothelial inflammation and suppress the formation of AS by increasing TRPV1 protein expression and up-regulating the PI3K/Akt/eNOS signaling pathway， which may be one of the molecular mechanisms underlying its therapeutic effect against AS.

Objective: To explore the feasibility, precision, and clinical value of a personalized primary repair approach centered on digital design, integrating 3D printing technology with multiple materials such as titanium mesh, polyetheretherketone (PEEK), and titanium plates, for complex craniofacial bone defects involving the skull, mandible, orbit, and zygoma resulting from traffic accidents, providing a reference for primary repair of clinically complex craniofacial bone defects. Methods: One patient who was admitted in September 2021 with multiple comminuted fractures of the right craniomaxillofacial region and large-area bone defects caused by a traffic accident was selected. Digital design was integrated throughout the entire repair process. First, preoperative computed tomography (CT) data were used for 3D reconstruction of the craniomaxillofacial region; then, based on the model, the anatomical contour of the healthy left side was reproduced via mirroring technology for the defects on the right side. A targeted repair plan was designed: 3D-printed PEEK material was used to reconstruct the right orbital floor and zygomaticomaxillary complex, a 0.6-mm-thick titanium mesh was adopted to repair the right skull defect, and a 2.0-mm-thick titanium plate was applied for rigid internal fixation of the mandibular fracture. A one-stage repair surgery was completed simultaneously. In addition, a literature review was conducted on studies related to the repair of complex combined craniomaxillofacial defects. Results: CT examination at 1 week postoperatively showed that the average fitting gap of the implants was 0.3 mm, and the symmetry difference of the facial contour was less than 5 mm. At 3 months postoperatively, the patient’s maximum mouth opening reached 38 mm, the occlusal relationship returned to normal, and the diplopia symptom completely disappeared. During the 6-month postoperative follow-up, no complications such as implant loosening, infection, or displacement occurred; the FACE-Q scale score was 91, indicating a high level of subjective patient satisfaction. The literature review indicated that digital design combined with 3D printing technology can significantly improve the accuracy of complex craniomaxillofacial bone defect reconstruction. PEEK material is suitable for the reconstruction of the orbital floor and zygomaticomaxillary complex. Titanium mesh and plates can ensure the stability of the reconstruction. Multi-materials combined reconstruction represents an important therapeutic strategy for such defects. Conclusion The individualized one-stage repair scheme, centered on digital design and combined with 3D printing technology and multi-materials (titanium mesh, PEEK, and titanium plates), can achieve precise anatomical reduction and simultaneous functional recovery for complex combined craniomaxillofacial bone defects caused by traffic accidents.

Objective: This prospective study evaluated the feasibility of chemical exchange saturation transfer (CEST) MRI for assessing disease activity in thyroid-associated ophthalmopathy (TAO). Materials and Methods: A total of 88 patients with active TAO, 76 with inactive TAO, and 30 healthy controls were enrolled. CEST MRI-derived magnetization transfer ratio (MTR) and MTR asymmetry (MTRasym) at 1 ppm, 2 ppm, and 3.5 ppm were calculated. Clinical data, MTR, and MTRasym values for the extraocular muscles (one representative muscle per eye, yielding two measurements per participant) were compared among the groups. Spearman’s correlation was used to examine associations between imaging parameters and the clinical activity score (CAS) in patients with TAO. Logistic regression analysis was used to identify independent associations between imaging parameters and disease activity in patients with TAO (active vs. inactive). Receiver operating characteristic (ROC) analysis was conducted to evaluate the diagnostic performance for discriminating active from inactive TAO. Results: Patients with active TAO showed lower MTR values (P < 0.001) and higher MTRasym (1 ppm), MTRasym (2 ppm), and MTRasym (3.5 ppm) (all P < 0.001) compared with those with inactive TAO. MTR was negatively correlated with CAS (r = -0.402; P < 0.001), while MTRasym (1 ppm), MTRasym (2 ppm), and MTRasym (3.5 ppm) were positively correlated with CAS (r = 0.369, 0.350, and 0.349, respectively;all P < 0.001). MTR and MTRasym (1 ppm) were independently associated with TAO activity. The areas under the ROC curve (AUCs) for MTR and MTRasym (1 ppm) in discriminating active from inactive TAO were 0.772 and 0.730, respectively. Combining MTR with MTRasym (1 ppm) significantly improved diagnostic performance compared with either parameter alone, achieving an AUC of 0.805 (P = 0.029 and 0.001). Conclusion MTR and MTRasym (1 ppm) were independently associated with TAO activity. Their combination further enhanced diagnostic performance in distinguishing active from inactive TAO, suggesting their potential as quantitative imaging biomarkers to guide treatment in patients with TAO.

Objective To explore the feasibility of magnetic compression technique (MCR) in the treatment of severe single mid-ureteral stricture in a rabbit model. Methods After 10 female New Zealand rabbits were selected, the distal end of the right ureter was ligated with silk thread. Two weeks after the operation, when the right ureter was dilated, the mid-ureter was ligated again with silk thread to create a severe single mid-ureteral stricture animal model. Longitudinal incisions were made at the upper and lower ends of the ligation site, and cylindrical NdFeB magnets with central holes (sub-magnets and main magnets) were placed to anastomose and recanalize the mid-ureteral stricture. The magnets were adjusted to the appropriate position to automatically align and attract each other. The longitudinal incision sites of the ureter were sutured with 6-0 Prolene thread, and the abdominal cavity was closed layer by layer. The operation time was recorded. X-ray films were taken every two days to confirm the position of the magnets and record the time of magnet detachment. Three weeks after the operation, the anastomotic specimens were obtained, and the formation of the anastomosis was evaluated with gross observation and histological staining. Results Two weeks after ligation, all experimental rabbits showed obvious dilation of the right ureter. The mid-ureteral ligation and placement of the male and female magnets were successfully completed in all 10 experimental rabbits, with an operation time of (24.00±5.15)minutes. The male and female magnets attracted each other well. X-ray examination showed that the magnets detached and entered the distal ureter (14.0±1.9) days after magnetic compression. The recanalization of the severe single mid-ureteral stricture was successfully achieved. The gross specimens and histological examination of the anastomosis showed that the anastomosis remained patent and the mucosal healing was good. All experimental rabbits survived well after the operation without serious complications. Conclusion MCT provides a new idea and novel method for the treatment of mid-ureteral stricture. This study confirmed the feasibility of this technique in treating severe single mid-ureteral stricture in a rabbit model. The operation is relatively simple and has potential for clinical application.

ObjectiveTo characterize the changes of metabolites of Blumea balsamifera in the process of sweating by non-targeted metabolomics， and to investigate the influence of sweating processing on the constituents of B. balsamifera. MethodsUltra performance liquid chromatography-quadrupole/electrostatic field orbitrap high resolution mass spectrometry（UPLC-Q-Exactive Orbitrap-MS） metabolomics was used to identify the metabolites in no sweating group（F1）， sweating 2 d group（F2） and sweating 4 d group（F3）， the differences of metabolites between the groups were compared by principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， and differential metabolites were screened according to the variable importance in the projection（VIP） value>1 and P<0.05， and the pathway enrichment of the differential metabolites was analyzed by Kyoto Encyclopedia of Genes and Genomes（KEGG）. ResultsThe results of PCA and OPLS-DA showed a clear distinction between the three groups of samples， indicating significant differences in the compositions of the three groups of samples. A total of 433 differential metabolites were screened between the F1 and F2， with 154 up-regulated and 279 down-regulated， the significant up-regulated metabolites were tangeritin， 5-O-demethylnobiletin and so on， while the metabolites with significant down-regulation included alternariol， fortunellin， etc. A total of 379 differential metabolites were screened between the F2 and F3， with 150 up-regulated and 229 down-regulated， the significant up-regulated metabolites were isoimperatorin， helianyl octanoate and so on， and the significant down-regulated metabolites were hovenoside I， goyasaponin Ⅲ， etc. KEGG pathway enrichment analysis showed that tyrosine metabolism， isoquinoline alkaloid biosynthesis， phenylalanine， tyrosine and tryptophan biosynthesis， tryptophan metabolism， valine， leucine and isoleucine biosynthesis， pantothenate and coenzyme A biosynthesis may be the key pathways affecting metabolite differences of B. balsamifera after sweating treatment. ConclusionSweating can reduce the content of endophytic mycotoxins in B. balsamifera and has a great impact on the synthesis and metabolic pathways of total flavonoids and auxin. This study can provide a reference for the process research on the sweating conditions of B. balsamifera.

BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

ObjectiveTo explore the effects of Renshentang on atherosclerosis （AS） in mice based on the role of transient receptor potential vanilloid1 （TRPV1） in regulating cholesterol metabolism in foam cells. MethodsNine SPF-grade 8-week-old C57BL/6J mice were set as a normal group， and 60 ApoE^-/- mice were randomized into model， positive drug （simvastatin， 0.02 g·kg^-1·d^-1）， and low-， medium-， and high-dose （1.77， 3.54， 7.08 g·kg^-1·d^-1， respectively） Renshentang groups （n=12） according to body weight. The normal group was fed with a normal diet， and the other groups were fed with a high-fat diet and given corresponding drugs by oral gavage for the modeling of AS. The mice were administrated with corresponding drugs once a day for 12 weeks. After the last administration and fasting for 12 h， the aorta was collected. Plaque conditions， pathological changes， levels of total cholesterol （TC）， triglcerides （TG）， low-density lipoprotein-cholesterol （LDL-C）， and high-density lipoprotein-cholesterol （HDL-C）， and the expression of TRPV1， liver X receptor （LXR）， inducible degrader of the low-density lipoprotein receptor （IDOL）， and low-density lipoprotein receptor （LDLR） in the aortic tissue were observed and detected by gross oil red O staining， HE staining， Western blot， immunohistochemistry， and real-time PCR. ResultsCompared with the normal group， the model group presented obvious plaque deposition in the aorta， raised levels of TC， TG， and LDL-C in the serum （P<0.01）， up-regulated expression level of LDLR in the aorta （P<0.01）， lowered level of HDL-C in the serum， and down-regulated expression levels of TRPV1， LXR， and IDOL in the aorta （P<0.05， P<0.01）. Compared with the model group， the positive drug and Renshentang at different doses alleviated AS， elevated the levels of HDL-C， TRPV1， LXR， and IDOL （P<0.05， P<0.01）， while lowering the levels of TC， TG， LDL-C， and LDLR （P<0.05， P<0.01）. ConclusionRenshentang has a lipid-lowering effect on AS mice. It can effectively reduce lipid deposition， lipid levels， and plaque area of AS mice by activating TRPV1 expression and regulating the LXR/IDOL/LDLR pathway.

Since the first successful transcatheter aortic valve replacement (TAVR) was performed globally in 2002, the TAVR technology has become increasingly mature. With more than a decade of development in China, its application experience, device research and development, procedural improvements, evidence-based medicine, and guideline updates have continuously progressed, leading to a significant increase in the number of procedures conducted. Compared to traditional surgical operations, TAVR has different postoperative monitoring points and principles for the prevention and management of complications, necessitating the formulation of corresponding monitoring and treatment protocols that align with the technical characteristics of the procedure. This guideline is based on clinical practice and incorporates both domestic and international literature as well as the experiences of Fuwai Hospital. It distills and organizes routine postoperative monitoring practices, process optimization, and complication management for TAVR, establishing a set of practical guidelines for postoperative monitoring in China. These guidelines have strong practical value for optimizing postoperative management strategies and preventing and managing complications, which is beneficial for early functional recovery of patients, shortening hospital stays, and reducing complication rates. They provide guidance and reference for domestic peers and support the standardized development and quality improvement of postoperative management for TAVR in China.