Objective:To analyze the learning curve of TiRobot-assisted lumbar pedicle screw fixation (LPSF) by cumulative sum (CUSUM) test method.Methods:The clinical data of 50 patients who underwent TiRobot-assisted LPSF from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyzed. CUSUM analysis and learning curve fitting were performed with robot usage time as the main indicator with the time for each step refined (robot registration time, path planning time and guide wire placement time), to select the best learning curve fitting model with the R2 value closest to 1. Using the turning point of the learning curve as the boundary, the learning curve was divided into two stages as learning stage and maturity stage, and then the observation indexes were compared between the two stages. Results:All 50 patients successfully completed the surgery without perioperative complications, with a total of 244 pedicle screws implanted. The total robot usage time and robot registration time showed a gradually decreasing trend with the increase of case number, and the learning curves were successfully fitted and reached their peaks at the seventeenth and thirteenth cases respectively. The entire learning process was divided into learning stage (17 cases) and maturity stage (33 cases) based on the turning point of the learning curve of total robot usage time. The path planning time and guide wire placement time did not show significant changes with the increase in the case number. The total robot usage time, robot registration time and the intraoperative blood loss in the learning stage were significantly higher than those in the maturity stage: (35.35 ± 1.58) min vs. (30.61 ± 0.43) min, (20.83 ± 1.56) min vs. (14.94 ± 0.29) min and 400 (150, 500) ml vs. 200 (110, 300) ml, the guide wire placement time of per screw was significantly lower than that in the maturity stage: 2.00 (1.83, 2.34) min/screw vs. 2.33 (2.13, 2.69) min/screw, and there were statistical differences ( P<0.05 or <0.01). There were no statistical difference in the path planning time, path planning time of per screw, guide wire placement time and the accuracy of screw placement between two stages ( P>0.05). Conclusions:TiRobot-assisted LPSF is a new technology with safety and effectiveness, and it has a relatively short learning curve. To achieve technological maturity, at least 17 surgeries are required with accumulated experience, and the robot registration is the main step of the learning process. After reaching maturity stage, the robot usage time is significantly shortened and intraoperative trauma is significantly reduced while the relatively high screw placement accuracy is ensured.

Objective:To analyze the reoperation rate and causes during the early adoption phase of unilateral biportal endoscopy (UBE).Methods:The clinical data of 180 patients who underwent UBE performed by a single surgeon at Beijing Friendship Hospital, Capital Medical University from October 2021 to June 2023 were retrospectively analyzed. Clinical and imaging data of patients who underwent reoperation were collected to analyze the causes of reoperation, and the clinical efficacy of the reoperations was also followed up. Measurement data were expressed as mean ± standard deviation ( ± s), and t-test was used before and after treatment. Results:A total of 180 patients who underwent UBE were included in this study, of which 6 patients underwent reoperation, and the reoperation rate was 3.33%. Among them, 3 cases occurred in the first 90 surgeries and the other 3 occurred in the subsequent 90 surgeries. The causes of reoperation were as follows: recurrent lumbar disc herniation at the same segment postoperatively in 2 cases, insufficient decompression in 2 cases, disc herniation following isolated decompression in 1 case, and immediate postoperative perianal numbness in 1 case. The time between the initial surgery and reoperation ranged from 0 to 187 days, with an average of 63.3 days. The average follow-up time after reoperation was 18.3 months. The visual analogue scale (VAS) and Oswestry disability index (ODI) scores of the patients at the last follow-up were significantly improved compared with those before operation (VAS score of low back pain: 5.2 ± 1.7 before operation, 1.2 ± 0.8 at the last follow-up, P<0.001; VAS score of leg pain: 7.2 ± 1.5 before operation, 1.2 ± 1.2 at the last follow-up, P<0.001; ODI score: 67.3 ± 5.7 before operation, 20.2 ± 8.2 at the last follow-up, P<0.001). The postoperative modified MacNab scores were generally satisfactory (4 cases were rated as excellent, accounting for 66.7%; 2 cases were rated as good, accounting for 33.3%). Except for one patient who experienced dural injury during open revision surgery, there were no serious complications such as nerve damage. Conclusions:In the early stages of UBE surgery, recurrent lumbar disc herniation and inadequate decompression are the primary reasons for reoperation, typically occurring within the first three months postoperatively. Reoperation does not significantly increase the risk of nerve injury. Enhanced early postoperative follow-up is recommended. For symptomatic patients, a second surgery with thorough decompression can yield satisfactory treatment outcomes.

Objective To construct a traditional Chinese medicine diagnostic scale suitable for chronic obstructive pulmonary disease(COPD)with lung qi stagnation syndrome,and to verify the reliability and validity of the scale.Methods Preliminary research has identified 16 core symptom items for lung qi stagnation syndrome.Diagnosis and scale collection were conducted on 95 patients using both traditional Chinese and Western medicine,with scores of 0,1,2,and 3 based on the severity of symptoms.By frequency t-test,discrete trend,and Cronbach's alpha coefficient screening items were used to evaluate the internal consistency of the scale,Spearman Brown coefficient was used to evaluate the stability of the scale,and exploratory factor analysis was used to determine the structural validity of the scale.Results Partial items were excluded and the final 11 scale items were confirmed.The overall Cronbach's alpha coefficient of the scale was 0.719,and the overall Spearman Brown coefficient was 0.647;The KMO test value is 0.612>0.5,The significance level of Bartlett's sphericity test is P<0.01;Extracting common factors with feature roots greater than 1,the maximum total variance explained by 64.122%was achieved when extracting four common factors.The common factor loadings for each item were all greater than 0.5,and the variance was all greater than 0.4,indicating good structural validity of the scale.Conclusion This study constructed and validated a traditional Chinese medicine diagnostic scale for COPD with lung qi stagnation syndrome.The scale has good reliability and validity,providing a reliable tool for clinical diagnosis and treatment.

Objective:To evaluate the safety and efficacy of the TiRobot assisted screw placement in patients with lumbar degenerative diseases.Methods:The clinical data of 165 patients with lumbar degenerative diseases from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyze, and all patients were treated with posterior lumbar decompression and instrumentation. Among them, 46 patients were used the TiRobot assisted screw placement during surgery (robotic-assisted group), and 119 patients underwent freehand screw placement by C-arm X-ray machine fluoroscopy (freehand group). The operation time, intraoperative blood loss, complication and skelalgia visual analogue scale (VAS), Oswestry disability index (ODI) before and after operation were recorded. The accuracy of screw placement and rate of proximal facet joint violation were compared between two groups.Results:There were no statistical difference in operation time, intraoperative blood loss and incidence of complication between two groups ( P>0.05). In the two groups, the 3 d VAS and ODI after operation were significantly lower than those before operation, robot-assisted group: (3.33 ± 1.40) scores vs. (6.54 ± 2.00) scores and (16.96 ± 8.03) scores vs. (43.09 ± 5.48) scores; freehand group: (3.56 ± 1.29) scores vs. (6.55 ± 1.65) scores and (18.89 ± 6.74) scores vs. (44.91 ± 4.96) scores, and there were statistical differences ( P<0.01); there were no statistical difference in VAS and ODI before operation and 3 d after operation between two groups ( P>0.05). A total of 234 screws were implanted in robot-assisted group, and 590 screws were implanted in freehand group. The accuracy of screw placement in robot-assisted group was significantly higher than that in freehand group: 80.77% (189/234) vs. 74.58% (440/590), the rate of proximal facet joint violation was significantly lower than that in freehand group: 2.56% (6/234) vs. 7.29% (43/590), and there were statistical differences ( χ2 = 3.56 and 6.68, P<0.05). Conclusions:The TiRobot assisted screw placement for lumbar degenerative diseases is safe and effective. Compared to freehand technique, the TiRobot assisted method demonstrates higher screw placement accuracy and a lower rate of proximal facet joint violation.

Objective:To analyze the learning curve of TiRobot-assisted lumbar pedicle screw fixation (LPSF) by cumulative sum (CUSUM) test method.Methods:The clinical data of 50 patients who underwent TiRobot-assisted LPSF from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyzed. CUSUM analysis and learning curve fitting were performed with robot usage time as the main indicator with the time for each step refined (robot registration time, path planning time and guide wire placement time), to select the best learning curve fitting model with the R2 value closest to 1. Using the turning point of the learning curve as the boundary, the learning curve was divided into two stages as learning stage and maturity stage, and then the observation indexes were compared between the two stages. Results:All 50 patients successfully completed the surgery without perioperative complications, with a total of 244 pedicle screws implanted. The total robot usage time and robot registration time showed a gradually decreasing trend with the increase of case number, and the learning curves were successfully fitted and reached their peaks at the seventeenth and thirteenth cases respectively. The entire learning process was divided into learning stage (17 cases) and maturity stage (33 cases) based on the turning point of the learning curve of total robot usage time. The path planning time and guide wire placement time did not show significant changes with the increase in the case number. The total robot usage time, robot registration time and the intraoperative blood loss in the learning stage were significantly higher than those in the maturity stage: (35.35 ± 1.58) min vs. (30.61 ± 0.43) min, (20.83 ± 1.56) min vs. (14.94 ± 0.29) min and 400 (150, 500) ml vs. 200 (110, 300) ml, the guide wire placement time of per screw was significantly lower than that in the maturity stage: 2.00 (1.83, 2.34) min/screw vs. 2.33 (2.13, 2.69) min/screw, and there were statistical differences ( P<0.05 or <0.01). There were no statistical difference in the path planning time, path planning time of per screw, guide wire placement time and the accuracy of screw placement between two stages ( P>0.05). Conclusions:TiRobot-assisted LPSF is a new technology with safety and effectiveness, and it has a relatively short learning curve. To achieve technological maturity, at least 17 surgeries are required with accumulated experience, and the robot registration is the main step of the learning process. After reaching maturity stage, the robot usage time is significantly shortened and intraoperative trauma is significantly reduced while the relatively high screw placement accuracy is ensured.

Objective To construct a traditional Chinese medicine diagnostic scale suitable for chronic obstructive pulmonary disease(COPD)with lung qi stagnation syndrome,and to verify the reliability and validity of the scale.Methods Preliminary research has identified 16 core symptom items for lung qi stagnation syndrome.Diagnosis and scale collection were conducted on 95 patients using both traditional Chinese and Western medicine,with scores of 0,1,2,and 3 based on the severity of symptoms.By frequency t-test,discrete trend,and Cronbach's alpha coefficient screening items were used to evaluate the internal consistency of the scale,Spearman Brown coefficient was used to evaluate the stability of the scale,and exploratory factor analysis was used to determine the structural validity of the scale.Results Partial items were excluded and the final 11 scale items were confirmed.The overall Cronbach's alpha coefficient of the scale was 0.719,and the overall Spearman Brown coefficient was 0.647;The KMO test value is 0.612>0.5,The significance level of Bartlett's sphericity test is P<0.01;Extracting common factors with feature roots greater than 1,the maximum total variance explained by 64.122%was achieved when extracting four common factors.The common factor loadings for each item were all greater than 0.5,and the variance was all greater than 0.4,indicating good structural validity of the scale.Conclusion This study constructed and validated a traditional Chinese medicine diagnostic scale for COPD with lung qi stagnation syndrome.The scale has good reliability and validity,providing a reliable tool for clinical diagnosis and treatment.

Objective:To evaluate the safety and efficacy of the TiRobot assisted screw placement in patients with lumbar degenerative diseases.Methods:The clinical data of 165 patients with lumbar degenerative diseases from January 2020 to December 2022 in Beijing Friendship Hospital, Capital Medical University were retrospectively analyze, and all patients were treated with posterior lumbar decompression and instrumentation. Among them, 46 patients were used the TiRobot assisted screw placement during surgery (robotic-assisted group), and 119 patients underwent freehand screw placement by C-arm X-ray machine fluoroscopy (freehand group). The operation time, intraoperative blood loss, complication and skelalgia visual analogue scale (VAS), Oswestry disability index (ODI) before and after operation were recorded. The accuracy of screw placement and rate of proximal facet joint violation were compared between two groups.Results:There were no statistical difference in operation time, intraoperative blood loss and incidence of complication between two groups ( P>0.05). In the two groups, the 3 d VAS and ODI after operation were significantly lower than those before operation, robot-assisted group: (3.33 ± 1.40) scores vs. (6.54 ± 2.00) scores and (16.96 ± 8.03) scores vs. (43.09 ± 5.48) scores; freehand group: (3.56 ± 1.29) scores vs. (6.55 ± 1.65) scores and (18.89 ± 6.74) scores vs. (44.91 ± 4.96) scores, and there were statistical differences ( P<0.01); there were no statistical difference in VAS and ODI before operation and 3 d after operation between two groups ( P>0.05). A total of 234 screws were implanted in robot-assisted group, and 590 screws were implanted in freehand group. The accuracy of screw placement in robot-assisted group was significantly higher than that in freehand group: 80.77% (189/234) vs. 74.58% (440/590), the rate of proximal facet joint violation was significantly lower than that in freehand group: 2.56% (6/234) vs. 7.29% (43/590), and there were statistical differences ( χ2 = 3.56 and 6.68, P<0.05). Conclusions:The TiRobot assisted screw placement for lumbar degenerative diseases is safe and effective. Compared to freehand technique, the TiRobot assisted method demonstrates higher screw placement accuracy and a lower rate of proximal facet joint violation.

Objective To compare animal models of chronic heart failure(CHF)prepared by three different protocols,to establish a stable,reliable,and reproducible mouse model of CHF.Methods Twenty-five male C57BL/6J mice were divided randomly into four groups:a blank group,model A group(MA group),model B group(MB group),and model C group(MC group).The model groups adopted different preparation protocols for continuous injection of isoprenaline.The MA group and MB group were dose-decreasing models:MA group:subcutaneous injection of 10 mg/kg on day 1,5 mg/kg on day 2,2.5 mg/(kg·d)on days 3～30,total 30 days;and MB group:subcutaneous injection of 20 mg/kg on day 1,10 mg/kg on day 2,5 mg/(kg·d)on days 3～14,total 14 days.The MC group used a constant dose of intraperitoneal injection of 7.5 mg/(kg·d)for 28 days.The day after the final injection,the survival and model-formation rates for each group of mice were calculated.Cardiac function was measured by cardiac ultrasound and serum levels of N-terminal pro B-type natriuretic peptide,interleukin-6,and tumor necrosis factor-α were measured.Results CHF was successfully induced in all the model groups after all injections at the end of the fourth week.However,comprehensive test result showed that the MC model was the most stable.Conclusions An isoprenaline-induced mouse model of CHF using constant intraperitoneal injection of 7.5 mg/(kg·d)for 28 days may be the most suitable model for subsequent research on traditional Chinese medicine.

ObjectiveTo investigate the objective characteristics of tongue manifestations in patients with coronary heart disease （CHD）. MethodsA total of 315 participants with CHD were recruited in the CHD group， and 211 healthy participants who underwent physical examination were recruited as the healthy control group. In addition， according to the common comorbidities （primary hypertension， carotid atherosclerosis， type 2 diabetes mellitus， fatty liver， hyperlipidaemia， heart failure， and cerebral infarction） in 315 participants with CHD， each comorbidity was classified into a group of comorbidities with that disease and a group of non-comorbidities. Tongue images were captured using a TFDA-1 tongue diagnostic instrument to characterise the tongue body （TB） and tongue coating （TC）， comparing the RGB， HIS， and Lab colour spaces in the chromaticity index （R， red； G， green； B， blue； H， hue； I， intensity； S， saturation； L， lightness； a， red-green axis； b， yellow-blue axis）， the tongue coating thickness index （per-All）， contrast （CON）， angular second moment （ASM）， entropy （ENT）， and mean （MEAN） in texture metrics. ResultsCompared with the healthy control group， the characteristic indexes of tongue body in CHD group showed lower TB-R， TB-G， TB-B， TB-I， TB-L and higher TB-H， TB-b； and the characteristic indexes of tongue coating in CHD group showed lower TC-R， TC-B and higher TC-CON， TC-MEAN， TC-H， TC-b （P＜0.05 or P＜0.01）. Compared with non-combined primary hypertension group， CHD combined primary hypertension group showed higher per-All， TB-G， TB-L， and lower TB-a， TC-a （P＜0.05）； compared with the non-combined carotid atherosclerosis group， CHD combined carotid atherosclerosis group showed higher TB-CON， TB-ENT， TB-MEAN， and lower TB-ASM （P＜0.05 or P＜0.01）； compared with the non-combined type 2 diabetes mellitus group， CHD combined type 2 diabetes mellitus group showed lower per-All and higher TB-H （P＜0.05 or P＜0.01）； compared with the non-combined fatty liver group， CHD combined fatty liver group showed higher TB-CON， TB-MEAN， TB-ENT， and lower TB-ASM and TC-S （P＜0.05 or P＜0.01）； compared with the non-combined hyperlipidaemia group， CHD combined hyperlipidaemia group showed lower TB-S and TB-a （P＜0.05）； compared with non-combined heart failure group， CHD combined heart failure group showed lower TB-R， TB-G， TB-I， TB-L， and higher TB-a （P＜0.05 or P＜0.01）； compared with non-combined cerebral infarction group， CHD combined cerebral infarction group showed higher TC-CON， TC-ENT， TC-MEAN， and lower TC-ASM （P＜0.05 or P＜0.01）. ConclusionCompared to healthy individuals， patients with CHD tend to have darker tongue colours and rougher TC textures. Compared with non-comorbidity participants， those with primary hypertension tended to be lighter tongue colour and thicker tongue coating， those with carotid atherosclerosis had paler tongue body， those with type 2 diabetes mellitus had thinner tongue coating， those with fatty liver disease had paler tongue body and whiter tongue colour， those with hyperlipidaemia and heart failure had paler tongue colour， and those with cerebral infarction had rougher tongue texture.

ObjectiveTo analyze the application of International Standards for Neurological Classification of Spinal Cord Injury (ISNCSCI) in China. MethodsResearches using ISNCSCI in the spinal cord injury were retrieved from CNKI, from January 1st, 2020 to December 31st, 2022. The authors and the keywords of the included literatures were analyzed using VOSviewer and CiteSpace to generate a collaboration network graph of authors and a theme distribution map of keywords. The objects, purposes, causes of spinal cord injury, distribution of researchers' departments, ISNCSCI version used, corresponding publication time and other information of the included studies were manual searched and analyzed. ResultsA total of 285 literatures were finally included, involving 1 279 authors, out of whom 111 published 97.19% of the total number of articles. The main keywords included spinal cord injury, spinal fractures, neurological function, thoracolumbar fractures and spinal tuberculosis, which classified in seven clusters, and the topics of spinal cord injury, efficacy, spinal fractures, quality of life and prognosis were the hotspots in the field. With manual searching, the main topic was spinal cord injury; the main object was traumatic spinal cord injury; the main purpose was to evaluate the surgical efficacy; the research institutions were mostly the comprehensive hospitals or specialized hospitals focusing on orthopedics (spinal surgery); the clinical departments that used ISNCSCI the most were orthopedics (including spinal surgery) and rehabilitation medicine, and nursing teams were paying more attention to ISNCSCI; the most commonly used versions of ISNCSCI were 2011 (7th edition) and 2000 (6th edition), however, for a large number of articles, the versions were not clear or earlier than 2000. ConclusionThe application of ISNCSCI in China should be improved in the standardization.