ObjectiveTo explore the potential mechanism underlying electroacupuncture therapy with the midnight-noon ebb-low method with hour-prescription for chronic obstructive pulmonary disease （COPD） with lung-qi deficiency syndrome from the perspective of brain and muscle basic helix-loop-helix ARNT-like 1 （BMAL1） as well as neutrophil extracellular traps （NETs）. MethodsThe experiment was conducted in two phases. For the therapeutic effectiveness observation， 24 rats were randomly allocated into control group 1， model group 1， midnight-noon electro-acupuncture group 1 and conventional electro-acupuncture group， with 6 rats per group. Rat models of COPD with lung-qi deficiency syndrome were established via cigarette smoke exposure combined with intratracheal instillation of lipopolysaccharide （LPS）. After successful modelling， rats in midnight-noon electro-acupuncture group 1 received electro-acupuncture at acupoints "Taiyuan （LU 9）"， "Feishu （BL 13）" and "Zusanli （ST 36）" during 05：00—07：00， 30 minutes per treatment once every other day for 14 consecutive days （7 sessions in total）. Rats in the conventional electro-acupuncture group received identical electroacupuncture manipulation at random daytime hours （08：00—18：00）. Pulmonary function parameters including forced expiratory volume in 0.3 second （FEV_0.3）， forced vital capacity （FVC） and FEV_0.3/FVC ratio were detected. Pulmonary histopathological changes were observed via hematoxylin-eosin （HE） staining. Plasma levels of pro-inflammatory factors interleukin-1β （IL-1β） and tumor necrosis factor-α （TNF-α）， as well as pulmonary reactive oxygen species （ROS） content， BMAL1 protein expression and the levels of neutrophil extracellular traps （NETs） biomarkers such as myeloperoxidase （MPO）， neutrophil elastase （NE）， and citrullinated histone H3 （CitH3） in lung tissue were determined. For the mechanistic verification phase， 36 rats were divided into control group 2， model group 2， midnight-noon electro-acupuncture group 2， overexpression empty group， overexpression BMAL1 group and overexpression with midnight-noon electro-acupuncture group， with 6 rats in each group. At the 5th week of model construction， rats in the overexpression BMAL1 group and overexpression with midnight-noon electro-acupuncture group received intratracheal instillation of 100 μl adenoviral suspension carrying overexpressed Bmal1 gene. Rats in the overexpression empty group were injected with an equal titer and equal volume of blank adenovirus without the Bmal1 coding sequence into the lung at the identical time point. Midnight-noon electro-acupuncture group 2 and overexpression with midnight-noon electro-acupuncture group were consistent with the aforementioned protocol. Finally， pulmonary levels of MPO， NE and CitH3 were measured in all groups. ResultsCompared with the control group 1， the model group 1 exhibited decreased FEV_0.3， FVC and FEV_0.3/FVC ratio， elevated plasma IL-1β， TNF-α and pulmonary ROS levels， downregulated lung BMAL1 protein expression， and increased contents of MPO， NE and CitH3 （all P＜0.05）； typical NETs-like structures with sparse granular substances attached to fibrous networks were observed under scanning electron microscopy； HE staining revealed damaged alveolar architecture accompanied by inflammatory cell infiltration. Compared with model group 1， both the midnight-noon electro-acupuncture group 1 and conventional electro-acupuncture group achieved obvious improvements in all above indicators， with superior therapeutic effects in midnight-noon electro-acupuncture group 1 （P＜0.05）. Consistently， midnight-noon electro-acupuncture group 1 showed more prominent alleviation of NETs-like structure formation and lung pathological injury compared to the conventional electro-acupuncture group. Mechanistic validation results demonstrated that compared with model group 2， the average optical density of MPO as well as the protein levels of MPO， NE and CitH3 were markedly reduced in midnight-noon electro-acupuncture group 2， overexpression BMAL1 group and overexpression with midnight-noon electro-acupuncture group （P＜0.05）； furthermore， these parameters were significantly lower in the overexpression with midnight-noon electro-acupuncture group than in midnight-noon electro-acupuncture group 2 （P＜0.05）. ConclusionElectro-acupuncture based on the midnight-noon ebb-low method with hour-prescription may alleviate pulmonary inflammation in COPD by upregulating the expression of clock protein BMAL1 and inhibiting excessive accumulation of NETs in lung tissue.

Objective:To investigate the impact of four registration methods on the accuracy of virtual occlusal records (VOR) in intraoral scanning for implant restorations with multiple missing teeth.Methods:A mandibular model simulating clinical conditions with multiple missing teeth (right first molar, left second premolar, left first molar, left second molar) and a maxillary compete dentition model were mounted on a semi-adjustable articulator. Subsequently, twelve 0.5 mm stainless steel spheres were adhered to reference positions (16, 46, 13, 43, 23, 33, 25, 35, 26, 36, 27, 37) as fiducial markers. Following this, a laboratory scanner generated reference datasets by digitizing the models in maximum intercuspation (MIP). Meanwhile, ten maxillary and mandibular scans were acquired using an intraoral scanner, with all nonarticulated scans duplicated four times to ensure data consistency. Forty VOR intraoral scans were performed in MIP using four registration protocols: left-side, right-side, anterior, and bilateral registration ( n=10 per group), randomized via a computer-generated pseudo-random sequence. For measurement, linear distances (D16-46, D13-43, D23-33, D25-35, D26-36, D27-37, D16-46 represented the single-tooth defect position, whereas D25-35, D26-36, D27-37 reflected positions in free-end edentulism areas) between opposing markers were measured in a reverse engineering software, with deviations (ΔD) from the reference scan calculated to assess accuracy. Specifically, negative ΔD values indicated vertical dimension underestimation. Given that non-normally distributed data were analyzed using medians [interquartile ranges (IQR)], trueness (median ΔD) and precision (IQR) were evaluated. The interaction effect between the registration method and the position of the measurement items was evaluated by using the generalized linear model. The accuracy was compared overall by the Kruskal-Wallis test with the two-sided significance level of α=0.05. For pairwise comparisons, post-hoc tests were conducted by Dunn′s t-test with the Bonferroni correction for the significance level. Results:The accuracy of VOR was affected by registration method ( P<0.05), with a significant position×registration method interaction observed ( P<0.05). In particular, in all four groups, only the bilateral registration group showed trueness of less than 0.1 mm for both free-end edentulism and the single tooth defect, with ΔD16-46, ΔD25-35, ΔD26-36, and ΔD27-37 being 0.059 (0.015), -0.082 (0.052), -0.065 (0.032), -0.070 (0.050) mm, respectively. Moreover, trueness in free-end edentulism showed negative values across all groups, with the largest negative deviations observed in the right-side registration group, with ΔD25-35, ΔD26-36 and ΔD27-37 being -0.410 (0.174), -0.442 (0.225), -0.439 (0.262) mm, respectively. Conclusions:In fully digital workflows of implant restorations for mandibular free-end edentulism with multiple missing teeth, registration method critically influences VOR accuracy. While four registration methods exhibited underestimation of occlusal vertical dimension, bilateral registration achieved the highest accuracy.

Objective:To construct curved microgrooves with gradient surface roughness on polycaprolactone (PCL) members by regulating alkali etching time and to investigate the synergistic effect of surface roughness and curved microgrooves on the in vitro osteogenic differentiation of mouse pre-osteoblasts (MC3T3-E1), aiming to determine the optimal PCL surface modification strategy. Methods:Soft lithography and melt-casting techniques were used to fabricate PCL membranes with regularly arranged curved microgrooves (CMP). Alkali etching was performed for 24, 48, and 72 h. Groups: smooth PCL (control), CMP (curved microgrooves only), CMP-24 h, CMP-48 h, CMP-72 h (CMP etched for 24, 48, 72 h, respectively). Surface physicochemical properties were characterized: surface morphology was observed by scanning electron microscopy (SEM), surface roughness was measured by atomic force microscopy (AFM), and surface hydrophilicity was evaluated by contact angle measurement. MC3T3-E1 cells were cultured in vitro. Cell adhesion, proliferation, and osteogenic differentiation were assessed using cell counting (CCK-8), immunofluorescence staining, alkaline phosphatase (ALP) and Alizarin red staining with quantification. The mRNA expression levels of osteogenesis-related genes [ALP, collagen type Ⅰ (COL-1), Runt-related transcription factor 2 (RUNX-2), osteocalcin (OCN), osteopontin (OPN)] were detected by real-time fluorescence quantitative PCR (RT-qPCR). Results:Curved microgrooves were successfully fabricated on PCL membranes. Alkali treatment improved surface hydrophilicity and increased roughness. The CMP-72 h group exhibited the best hydrophilicity (contact angle: 33.2°±5.5°), with significant differences compared to all other groups (all P<0.05). The CMP-72 h group showed the highest roughness [(59.966±4.729) nm], which was significantly different from all other groups (all P<0.05). CCK-8 results on day 5 showed that both curved microgrooves and roughness promoted cell proliferation: CMP-24 h (0.292±0.003) and CMP-72 h (0.383±0.004) were significantly higher than those in the smooth group (0.270±0.005) (all P<0.05). Immunofluorescence staining revealed that curved microgrooves induced significant contact guidance of cells; this effect weakened with increasing etching time. ALP and Alizarin red staining indicated the deepest osteogenic staining in the CMP-48 h group. Both ALP activity (0.013 021±0.000 032) and Alizarin red quantification (0.290±0.003) were highest in the CMP-48 h group, significantly different from all other groups (all P<0.05). RUNX-2 expression in CMP-24 h and CMP-48 h groups (1.845±0.087 and 1.837±0.027, respectively) was significantly higher than in other groups (all P<0.05), with no significant difference between these two groups ( P>0.05). CMP-48 h group exhibited the highest mRNA expression of all osteogenic genes tested, specifically ALP (2.194±0.028), COL-1 (1.983±0.024), OCN (7.644±0.156), and OPN (2.648±0.031), all significantly greater than other groups (all P<0.05). Conclusions:Both curved microgrooves and surface roughness modification enhance the in vitro osteogenic differentiation of cells on PCL membranes. Among the tested strategies, alkali etching of curved microgrooves for 48 hours (CMP-48h) provided the optimal enhancement of osteogenic capability for MC3T3-E1 cells and represented a promising surface modification strategy for future PCL membranes.

Objective To investigate the effect of unilateral or bilateral transcranial direct current stimulation(tDCS)on post-stroke dysphagia.Methods From February,2023 to March,2025,27 stroke patients with dysphagia and nasal feeding in Beijing Bo'ai Hos-pital were randomly divided into healthy side stimulation group,bilateral stimulation group and sham stimulation group,with nine cases in each group.All the groups received conventional swallowing training and tDCS,while the healthy side stimulation group stimulated on the healthy side of oropharyngeal cortex;and the bilateral stimu-lation group alternatively stimulated bilateral oropharyngeal cortex,with one hour interval between bilateral stim-ulation;the sham stimulation group stimulated the healthy side of oropharyngeal cortex for 30 seconds and then stop.The course lasted two weeks.The scores of Standard Swallowing Function Assessment Scale(SSA),Modi-fied Mann Assessment of Swallowing Ability(MMASA)and Rosenbek Penetration-Aspiration Scale(PAS)were compared before and after treatment.Results The intra-group effect(F=16.185,P<0.01)was significant in the scores of SSA,the intra-group effect(F=28.650,P<0.01)and interaction effect(F=3.453,P<0.01)were significant in the scores of MMASA,and there was no significant difference in the inter-group effect,intra-group effect and interaction effect in the scores of PAS(P>0.05).Post hoc test showed that there was no significant difference in the scores of SSA,MMASA and PAS among three groups(P>0.05).There was significant difference in the score difference of MMASA be-fore and after treatment among three groups(F=4.698,P<0.05).Post hoc test showed that the score difference of MMAS was more in the healthy side stimulation group than in the bilateral stimulation group and the sham stimulation group(P<0.05),with no significant difference between the bilateral stimulation group and the sham stimulation group(P>0.05).Conclusion tDCS can partly improve post-stroke dysphagia.The healthy side anode stimulation is superior to the alter-nating bilateral hemisphere anode stimulation.

Objective:To investigate the impact of four registration methods on the accuracy of virtual occlusal records (VOR) in intraoral scanning for implant restorations with multiple missing teeth.Methods:A mandibular model simulating clinical conditions with multiple missing teeth (right first molar, left second premolar, left first molar, left second molar) and a maxillary compete dentition model were mounted on a semi-adjustable articulator. Subsequently, twelve 0.5 mm stainless steel spheres were adhered to reference positions (16, 46, 13, 43, 23, 33, 25, 35, 26, 36, 27, 37) as fiducial markers. Following this, a laboratory scanner generated reference datasets by digitizing the models in maximum intercuspation (MIP). Meanwhile, ten maxillary and mandibular scans were acquired using an intraoral scanner, with all nonarticulated scans duplicated four times to ensure data consistency. Forty VOR intraoral scans were performed in MIP using four registration protocols: left-side, right-side, anterior, and bilateral registration ( n=10 per group), randomized via a computer-generated pseudo-random sequence. For measurement, linear distances (D16-46, D13-43, D23-33, D25-35, D26-36, D27-37, D16-46 represented the single-tooth defect position, whereas D25-35, D26-36, D27-37 reflected positions in free-end edentulism areas) between opposing markers were measured in a reverse engineering software, with deviations (ΔD) from the reference scan calculated to assess accuracy. Specifically, negative ΔD values indicated vertical dimension underestimation. Given that non-normally distributed data were analyzed using medians [interquartile ranges (IQR)], trueness (median ΔD) and precision (IQR) were evaluated. The interaction effect between the registration method and the position of the measurement items was evaluated by using the generalized linear model. The accuracy was compared overall by the Kruskal-Wallis test with the two-sided significance level of α=0.05. For pairwise comparisons, post-hoc tests were conducted by Dunn′s t-test with the Bonferroni correction for the significance level. Results:The accuracy of VOR was affected by registration method ( P<0.05), with a significant position×registration method interaction observed ( P<0.05). In particular, in all four groups, only the bilateral registration group showed trueness of less than 0.1 mm for both free-end edentulism and the single tooth defect, with ΔD16-46, ΔD25-35, ΔD26-36, and ΔD27-37 being 0.059 (0.015), -0.082 (0.052), -0.065 (0.032), -0.070 (0.050) mm, respectively. Moreover, trueness in free-end edentulism showed negative values across all groups, with the largest negative deviations observed in the right-side registration group, with ΔD25-35, ΔD26-36 and ΔD27-37 being -0.410 (0.174), -0.442 (0.225), -0.439 (0.262) mm, respectively. Conclusions:In fully digital workflows of implant restorations for mandibular free-end edentulism with multiple missing teeth, registration method critically influences VOR accuracy. While four registration methods exhibited underestimation of occlusal vertical dimension, bilateral registration achieved the highest accuracy.

Objective:To construct curved microgrooves with gradient surface roughness on polycaprolactone (PCL) members by regulating alkali etching time and to investigate the synergistic effect of surface roughness and curved microgrooves on the in vitro osteogenic differentiation of mouse pre-osteoblasts (MC3T3-E1), aiming to determine the optimal PCL surface modification strategy. Methods:Soft lithography and melt-casting techniques were used to fabricate PCL membranes with regularly arranged curved microgrooves (CMP). Alkali etching was performed for 24, 48, and 72 h. Groups: smooth PCL (control), CMP (curved microgrooves only), CMP-24 h, CMP-48 h, CMP-72 h (CMP etched for 24, 48, 72 h, respectively). Surface physicochemical properties were characterized: surface morphology was observed by scanning electron microscopy (SEM), surface roughness was measured by atomic force microscopy (AFM), and surface hydrophilicity was evaluated by contact angle measurement. MC3T3-E1 cells were cultured in vitro. Cell adhesion, proliferation, and osteogenic differentiation were assessed using cell counting (CCK-8), immunofluorescence staining, alkaline phosphatase (ALP) and Alizarin red staining with quantification. The mRNA expression levels of osteogenesis-related genes [ALP, collagen type Ⅰ (COL-1), Runt-related transcription factor 2 (RUNX-2), osteocalcin (OCN), osteopontin (OPN)] were detected by real-time fluorescence quantitative PCR (RT-qPCR). Results:Curved microgrooves were successfully fabricated on PCL membranes. Alkali treatment improved surface hydrophilicity and increased roughness. The CMP-72 h group exhibited the best hydrophilicity (contact angle: 33.2°±5.5°), with significant differences compared to all other groups (all P<0.05). The CMP-72 h group showed the highest roughness [(59.966±4.729) nm], which was significantly different from all other groups (all P<0.05). CCK-8 results on day 5 showed that both curved microgrooves and roughness promoted cell proliferation: CMP-24 h (0.292±0.003) and CMP-72 h (0.383±0.004) were significantly higher than those in the smooth group (0.270±0.005) (all P<0.05). Immunofluorescence staining revealed that curved microgrooves induced significant contact guidance of cells; this effect weakened with increasing etching time. ALP and Alizarin red staining indicated the deepest osteogenic staining in the CMP-48 h group. Both ALP activity (0.013 021±0.000 032) and Alizarin red quantification (0.290±0.003) were highest in the CMP-48 h group, significantly different from all other groups (all P<0.05). RUNX-2 expression in CMP-24 h and CMP-48 h groups (1.845±0.087 and 1.837±0.027, respectively) was significantly higher than in other groups (all P<0.05), with no significant difference between these two groups ( P>0.05). CMP-48 h group exhibited the highest mRNA expression of all osteogenic genes tested, specifically ALP (2.194±0.028), COL-1 (1.983±0.024), OCN (7.644±0.156), and OPN (2.648±0.031), all significantly greater than other groups (all P<0.05). Conclusions:Both curved microgrooves and surface roughness modification enhance the in vitro osteogenic differentiation of cells on PCL membranes. Among the tested strategies, alkali etching of curved microgrooves for 48 hours (CMP-48h) provided the optimal enhancement of osteogenic capability for MC3T3-E1 cells and represented a promising surface modification strategy for future PCL membranes.

Objective To investigate the effect of unilateral or bilateral transcranial direct current stimulation(tDCS)on post-stroke dysphagia.Methods From February,2023 to March,2025,27 stroke patients with dysphagia and nasal feeding in Beijing Bo'ai Hos-pital were randomly divided into healthy side stimulation group,bilateral stimulation group and sham stimulation group,with nine cases in each group.All the groups received conventional swallowing training and tDCS,while the healthy side stimulation group stimulated on the healthy side of oropharyngeal cortex;and the bilateral stimu-lation group alternatively stimulated bilateral oropharyngeal cortex,with one hour interval between bilateral stim-ulation;the sham stimulation group stimulated the healthy side of oropharyngeal cortex for 30 seconds and then stop.The course lasted two weeks.The scores of Standard Swallowing Function Assessment Scale(SSA),Modi-fied Mann Assessment of Swallowing Ability(MMASA)and Rosenbek Penetration-Aspiration Scale(PAS)were compared before and after treatment.Results The intra-group effect(F=16.185,P<0.01)was significant in the scores of SSA,the intra-group effect(F=28.650,P<0.01)and interaction effect(F=3.453,P<0.01)were significant in the scores of MMASA,and there was no significant difference in the inter-group effect,intra-group effect and interaction effect in the scores of PAS(P>0.05).Post hoc test showed that there was no significant difference in the scores of SSA,MMASA and PAS among three groups(P>0.05).There was significant difference in the score difference of MMASA be-fore and after treatment among three groups(F=4.698,P<0.05).Post hoc test showed that the score difference of MMAS was more in the healthy side stimulation group than in the bilateral stimulation group and the sham stimulation group(P<0.05),with no significant difference between the bilateral stimulation group and the sham stimulation group(P>0.05).Conclusion tDCS can partly improve post-stroke dysphagia.The healthy side anode stimulation is superior to the alter-nating bilateral hemisphere anode stimulation.

Objective:To understand the relationship between unhealthy lifestyle and hyperuricemia, as well as the modification effects of hypertension and dyslipidemia in occupational population and provide a theoretical basis for the prevention of hyperuricemia.Methods:A cross-sectional survey design was adopted, based on baseline data from the Southwest Occupational Population Cohort from China Railway Chengdu Group Co., Ltd., which included the population in 28 prefectures from Sichuan Province and Guizhou Province, and 33 districts (counties) from Chongqing Municipality between October and December 2021. This study collected the information about the demographics characteristics, lifestyles, and prevalence of chronic non-communicable diseases of the study subjects through questionnaire, physical measurement and laboratory biochemical test. The unhealthy lifestyle score was scored based on smoking, alcohol consumption, dietary patterns, physical activity, and low weight or overweight, with higher scores being associated with more unhealthy lifestyles. The multivariate logistic regression model was used to analyze the relationship between unhealthy lifestyle score, smoking, alcohol consumption, other factors and hyperuricemia, and the stratified analysis was used to explore the modification effect of hypertension and other diseases on the relationship between unhealthy lifestyle and hyperuricemia.Results:A total of 11 748 participants were included in this study, the prevalence of hyperuricemia was 34.4%. Multivariate logistic regression model showed that current/previous smoking, current/previous alcohol consumption and BMI abnormality were risk factors for hyperuricemia, and the unhealthy lifestyle score showed a "cumulative" effect on the risk for hyperuricemia, with higher score increasing the risk of hyperuricemia, and the OR increased from 1.64 (95% CI: 1.34-2.00) to 2.89 (95% CI: 2.39-3.50). Stratified analysis showed that unhealthy lifestyles had a greater impact on the risk for hyperuricemia in people with hypertension and dyslipidemia. Conclusions:The coexistence of multiple unhealthy lifestyles might increase the risk of hyperuricemia, and this effect was stronger in participants with hypertension and dyslipidemia. Timely correction of unhealthy lifestyles, and control of hypertension and dyslipidemia might reduce the risk for hyperuricemia.

Objective:To explore the mechanism of Honghua Xiaoyao Tablets in the treatment of premature ovarian failure (POF) using network pharmacology and molecular docking technology; To conduct further experimental verification.Methods:The active components and related targets of Honghua Xiaoyao Tablets were obtained using TCMSP and PubChem databases, and the related targets of POF were obtained by using GeneCards database. The Venn online tool was used to screen the intersection genes, and the STRING database was used to construct the PPI network. Then, GO function enrichment analysis and KEGG pathway enrichment analysis were performed on the intersecting genes through the Metescape database, and Cytoscape 3.7.1 software was used to construct the "active component-target" network and "Chinese materia medica-active component-target-key pathway-disease" network. Finally, molecular docking verification was carried out. Mice were divided into blank group, model group, and Honghua Xiaoyao Tablets group using a random number table method, with 8 mice in each group. Except for the blank group, mice in each group were treated with zona pellucida polypeptide 3 (ZP3) and Freund's Complete Adjuvant (FCA) to establish a mouse model of immune POF. Mice in the Honghua Xiaoyao Tablets group received Honghua Xiaoyao Tablets solution 0.56 g/kg for gavage, and the blank control group and the model group received saline for gavage for consecutive 4 weeks. The histopathological changes of the mouse ovary were observed by HE staining. Immunohistochemical staining was used to observe the expression of ESR1, and Western blot was used to detect the expressions of Akt and p-Akt.Results:A total of 80 intersection targets between Honghua Xiaoyao Tablets and POF were obtained, and the PPI network contained 44 core targets. The top 5 compounds in the topological analysis were formononetin, quercetin, Betulinic acid, Hydroxysafflor Yellow A and Baicalin, and the top 5 targets were PPARG, ESR1, AR, AKT1 and IL6. The molecular function of core genes was mainly receptor ligand activity, and its biological process mainly involved the positive regulation of cell migration. The cellular components mainly included membrane rafts, which were involved in signaling pathways such as cancer signaling pathway, proteoglycans in cancer, PI3K-Akt signaling pathway, and HIF-1 signaling pathway. "Chinese materia medica-component-target-pathway-disease" network showed that 8 kinds of Chinese materia medica in the Honghua Xiaoyao Tablets had important core components, among which Glycyrrhizae Radix et Rhizoma and Carthami Flos involved the most important core components. Molecular docking results showed that the active components had a good affinity with the core target. The experimental verification confirmed that Honghua Xiaoyao Tablets promoted follicular development, increased the expression of ESR1 in ovarian tissues and up-regulated the expression level of the key factor of Akt phosphorylation in the PI3K-Akt signaling pathway.Conclusions:The various active components of Honghua Xiaoyao Tablets may act on PPARG, ESR1 and other targets through multiple signaling pathways such as PI3K-Akt and HIF-1 to treat POF. The potential active components are mainly formononetin, quercetin, etc.

Objective To investigate the status quo and the needs of medical imaging technicians(MITs)in the radiology department of secondary and tertiary hospitals in China,so as to provide references and support for the development of the medical imaging technology industry and the relevant policymaking by health administrative departments.Methods The questionnaire was developed by the Chinese Society of Imaging Technology.The radiology department of each hospital involved in the survey recommended one MIT to fill out the online questionnaire.The contents included:(a)the basic information of the hospital;(b)a general overview of the MITs in the hospital;(c)daily work;(d)career development and promotion;(e)research status and needs,etc.Differences in the number of MIT staff were compared using the Mann-Whitney U test and the chi-square test was used to compare the differences in the selected numbers of MITs in need between regions or between different levels of hospitals.Results In this investigation,valid questionnaires were finally obtained from a total of 5 403 hospitals in 31 provinces in China.The total number of MITs of the hospitals covered in the sample was 67 481.The number of MITs in each hospital was 9(5,16).The male-to-female ratio was 1.41:1.MITs who were 20 to 40 years old accounted for 78%.The proportions of MITs who had completed doctorate,master's,undergraduate,junior college,and technical secondary school or lower level education were 0.6%,3.3%,60.7%,30.8%,and 4.55%,respectively.The proportions of chief MITs,deputy chief MITs,supervisor MITs,primary MITs,assistant technician and those below were 1.0%,4.21%,22.1%,51.8%,and 20.9%,respectively.The overall professional satisfaction of MITs was good."Lack of opportunities for learning and communication"was quoted as the main problem MITs encountered in regard to improving their job-related competency.59.2% of the respondents had not published any academic papers in the past five years,and only 7.0% of the respondents had published in journals included in the Science Citation Index(SCI)in the past five years.Conclusion MITs in China are on average relatively young and the number of MITs has greatly increased.At this stage,more attention should be given to the cultivation of talents and continuing education of MITs and the construction of the discipline should be further strengthened,so as to provide strong support for the development of the medical imaging technology industry in China.