Myocardial fibrosis （MF） is a common pathological manifestation of various heart diseases. Due to the non-renewable nature of myocardial cells， the occurrence of MF represents irreversible damage to the myocardium. Previous studies have suggested that fibroblast-mediated collagen deposition is the main mechanism of MF. Recent studies have found that there is an immune regulation mechanism in the heart itself， and macrophage activation/polarization plays an important role in MF. With the deepening of traditional Chinese medicine research， scholars have found that traditional Chinese medicine can interfere with MF by regulating the renin-angiotensin-aldosterone system （RAAS） system and the inflammatory process， repairing the extracellular matrix， managing oxidative stress， and maintaining the balance of autophagy. This process is closely related to the activation and M1/M2 polarization of macrophages. Throughout the MF process， macrophage activation is beneficial， but excessive activation will be harmful. In the early stage of MF， appropriate M1 macrophage polarization is conducive to activating immunity and removing harmful substances. In the middle and late stages of MF， appropriate M2 macrophage polarization is conducive to remodeling the damaged myocardium. If macrophage activation is excessive/insufficient， or the balance of M1/M2 macrophage polarization is broken， the effect changes from improvement to destruction. Traditional Chinese medicines that regulate the activation/polarization of macrophages have the effects of replenishing Qi and nourishing Yin， as well as regulating Qi and activating blood， but there are also some heat-clearing， dampness-drying， and detoxification products. Therefore， the occurrence of MF may be caused by Qi and Yin deficiency， damp heat accumulation， and Qi stagnation and blood stasis. By summarizing the biological processes involved in macrophage activation/polarization in MF， this paper expounded on the research progress of traditional Chinese medicine in regulating macrophage activation and M1/M2 polarization from different angles to improve MF， so as to provide a reference for the treatment of MF with traditional Chinese medicine.

Objective:To evaluate the safety and efficacy of the domestic robotic surgical system for general surgery.Methods:A prospective single-center, single-arm exploratory study was conducted at Gansu Provincial People's Hospital from Jun 2022 to Oct 2023, enrolling 54 patients undergoing general surgery using domestically produced Toumai? Endoscopic Surgical Robotic System. The primary study endpoint was surgical success rate, and the secondary study endpoints were intraoperative bleeding, operative time, complications, system performance, hospitalization days.Results:In this study, robotic surgery was successfully completed in 52 patients, and in 2 patients undergoing thyroid operation it was converted to open surgery due to bleeding, with a success rate of 96%, no organ injury or death during surgery, and no system failure. The types of surgery included cholecystectomy, radical gastric cancer resection, radical colorectal cancer resection, inguinal hernia repair, partial hepatectomy, total thyroidectomy and choledocho-jejunal anastomosis.Conclusion:The study provides preliminary evidence of the safety and efficacy of the Toumai? Endoscopic Surgical Robotic System for the treatment of general surgical diseases.

Objective To explore the application value of simultaneous multi-slice(SMS)technique in diffusion tensor imaging(DTI)for evaluating brain glioma.Methods Thirty-four brain glioma patients were prospectively enrolled,and brain conventional DTI and SMS-DTI were acquired.The subjective scores of image quality,signal-to-noise ratio(SNR)and contrast-to-noise ratio(CNR)were compared between SMS-DTI and conventional DTI,so were the numbers of whole brain fiber bundles,tumor relative fractional anisotropy(rFA)and relative mean diffusivity(rMD)obtained based on SMS-DTI and conventional DTI.Results Among 34 patients,there were 23 cases of high-grade glioma and 11 cases of low-grade glioma.No significant difference of subjective scores of image quality,tumor edge clarity nor magnetic susceptibility artifacts was found between SMS-DTI and conventional DTI(all P＞0.05).SNR and CNR on SMS-DTI were both lower than those on conventional DTI(both P＜0.05).No significant difference of the numbers of whole brain fiber bundles,rFA nor rMD of gliomas with different pathological grades was detected based on SMS-DTI compared with those on conventional DTI(all P＞0.05).Conclusion SMS applicated in DTI for evaluating brain gliomas was able to shorten acquisition time under the condition of ensuring image quality and quantitative analysis accuracy.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective:To investigate the effect of radiofrequency radiation (RF) from 5G mobile phone communication frequency bands (3.5 GHz and 4.9 GHz) on the permeability of the blood-brain barrier (BBB) in mice.Methods:A total of 24 healthy adult male C57BL/6 mice (6-8 weeks old) were randomly divided into Sham, 3.5 GHz RF and 4.9 GHz RF groups, and 8 mice in each group. Mice in the RF groups were systemically exposed to 5G cell phone radiation for consecutive 35 d(1 h/d) with 50 W/m 2 power density. The BBB permeability of mice was detected by Evans Blue (EB) fluorescence experiment. The expression levels of the BBB tight junction-related proteins (ZO-1, occludin and claudin-11) and the gap junction-related protein Connexin 43 were determined by Western blot. Results:The number of spots, fluorescence intensity and comprehensive score of EB were significantly increased in 3.5 GHz RF group and 4.9 GHz RF group compared with the Sham group ( t=12.98, 17.82, P<0.001). Compared with the Sham group, the content of S100B in mouse serum was significantly increased in 3.5 GHz RF group and 4.9 GHz RF group ( t=19.34, 14.68, P<0.001). The BBB permeability was increased in the RF group. The expression level of occludin protein was significantly reduced in the 3.5 GHz RF group ( t=-3.13, P<0.05), and this decrease was much profound in the 4.9 GHz RF group ( t=-6.55, P<0.01). But the protein levels of ZO-1, Claudin-11 and Connexin 43 in the cerebral cortex of the RF groups had no significantly difference in comparison with the Sham group( P>0.05). Conclusions:The continuous exposure of mobile phone RF at 3.5 GHz or 4.9 GHz for 35 d (1 h/d) induces an increase of BBB permeability in the mouse cerebral cortex, perhaps by reducing the expression of occludin protein.

Glioblastoma (GBM), characterized by rapid progression, easy recurrence and treatment resistance, is the most aggressive and lethal tumor of the central nervous system. Adenovirus E1A binding protein p300 (p300) serves rich functions as transcriptional coactivator and lysine acetyltransferase. Studies have shown that p300 plays an important role in the occurrence, proliferation, invasion and resistance to chemoradiotherapy of GBM. This paper reviews the structure and function of p300, and systematically expounds its various ways participating in GBM development and its translational perspectives, so as to provide references for GBM study.