ObjectiveTo verify the association between the Ddit3-Trib3-Akt signaling pathway and rat spermatogenesis by constructing an in vitro co-culture system of testis. MethodsTesticular tissue blocks from 20-25-day-old male rats were placed in an in vitro culture system， and the culture medium was replaced every 2 to 3 days. PCR was used to verify the expression of marker genes of various spermatogenic cells. RNA interference technology was employed to verify the correlation between the Ddit3-Trib3-Akt signaling pathway and rat spermatogenesis. ResultsThe co-culture system could be continuously cultured for more than 2.5 months in vitro. RT-PCR showed that specific marker genes of spermatogonia， spermatocyte and spermoblast were expressed. The RNA and protein expression of Trib3 and Akt changed after the knocking down of Ddit3 and Trib3， respectively. It demonstrated the existence of Ddit3-Trib3-Akt signaling pathway in rat spermatogenesis. ConclusionThe culture time of more than 2.5 months indicates that the culture system can temporarily maintain the proliferation and differentiation of stem cells， and simultaneously maintain and stabilize spermatogenesis in a simple system. The successful validation of the Ddit3-Trib3-Akt signaling pathway also confirms that this culture system can be used to study possible molecular mechanisms of spermatogenesis in vitro.

OBJECTIVE: To evaluate the clinical efficacy and safety of Yangxue Qingnao Pills (YXQNP) combined with amlodipine in treating patients with grade 1 hypertension. METHODS: This is a multicenter, randomized, double-blind, and placebo-controlled study. Adult patients with grade 1 hypertension of blood deficiency and Gan (Liver)-yang hyperactivity syndrome were randomly divided into the treatment or the control groups at a 1:1 ratio. The treatment group received YXQNP and amlodipine besylate, while the control group received YXQNP's placebo and amlodipine besylate. The treatment duration lasted for 180 days. Outcomes assessed included changes in blood pressure, Chinese medicine (CM) syndrome scores, symptoms and target organ functions before and after treatment in both groups. Additionally, adverse events, such as nausea, vomiting, rash, itching, and diarrhea, were recorded in both groups. RESULTS: A total of 662 subjects were enrolled, of whom 608 (91.8%) completed the trial (306 in the treatment and 302 in the control groups). After 180 days of treatment, the standard deviations and coefficients of variation of systolic and diastolic blood pressure levels were lower in the treatment group compared with the control group. The improvement rates of dizziness, headache, insomnia, and waist soreness were significantly higher in the treatment group compared with the control group (P<0.05). After 30 days of treatment, the overall therapeutic effects on CM clinical syndromes were significantly increased in the treatment group as compared with the control group (P<0.05). After 180 days of treatment, brachial-ankle pulse wave velocity, ankle brachial index and albumin-to-creatinine ratio were improved in both groups, with no statistically significant differences (P>0.05). No serious treatment-related adverse events occurred during the study period. CONCLUSIONS Combination therapy of YXQNP with amlodipine significantly improved symptoms such as dizziness and headache, reduced blood pressure variability, and showed a trend toward lowering urinary microalbumin in hypertensive patients. These findings suggest that this regimen has good clinical efficacy and safety. (Registration No. ChiCTR1900022470).
Humans ; Amlodipine/adverse effects* ; Drugs, Chinese Herbal/adverse effects* ; Male ; Female ; Hypertension/complications* ; Middle Aged ; Treatment Outcome ; Drug Therapy, Combination ; Adult ; Blood Pressure/drug effects* ; Double-Blind Method ; Aged ; Antihypertensive Agents/adverse effects*

OBJECTIVE: To evaluate the dynamic changes of glucocorticoid (GC) dose and the feasibility of GC discontinuation in rheumatoid arthritis (RA) patients under the background of Chinese medicine (CM). METHODS: This multicenter retrospective cohort study included 1,196 RA patients enrolled in the China Rheumatoid Arthritis Registry of Patients with Chinese Medicine (CERTAIN) from September 1, 2019 to December 4, 2023, who initiated GC therapy. Participants were divided into the Western medicine (WM) and integrative medicine (IM, combination of CM and WM) groups based on medication regimen. Follow-up was performed at least every 3 months to assess dynamic changes in GC dose. Changes in GC dose were analyzed by generalized estimator equation, the probability of GC discontinuation was assessed using Kaplan-Meier curve, and predictors of GC discontinuation were analyzed by Cox regression. Patients with <12 months of follow-up were excluded for the sensitivity analysis. RESULTS: Among 1,196 patients (85.4% female; median age 56.4 years), 880 (73.6%) received IM. Over a median 12-month follow-up, 34.3% (410 cases) discontinued GC, with significantly higher rates in the IM group (40.8% vs. 16.1% in WM; P<0.05). GC dose declined progressively, with IM patients demonstrating faster reductions (median 3.75 mg vs. 5.00 mg in WM at 12 months; P<0.05). Multivariate Cox analysis identified age <60 years [P<0.001, hazard ratios (HR)=2.142, 95% confidence interval (CI): 1.523-3.012], IM therapy (P=0.001, HR=2.175, 95% CI: 1.369-3.456), baseline GC dose ⩽7.5 mg (P=0.003, HR=1.637, 95% CI: 1.177-2.275), and absence of non-steroidal anti-inflammatory drugs use (P=0.001, HR=2.546, 95% CI: 1.432-4.527) as significant predictors of GC discontinuation. Sensitivity analysis (545 cases) confirmed these findings. CONCLUSIONS RA patients receiving CM face difficulties in following guideline-recommended GC discontinuation protocols. IM can promote GC discontinuation and is a promising strategy to reduce GC dependency in RA management. (Trial registration: ClinicalTrials.gov, No. NCT05219214).
Adult ; Aged ; Female ; Humans ; Male ; Middle Aged ; Arthritis, Rheumatoid/drug therapy* ; Glucocorticoids/therapeutic use* ; Medicine, Chinese Traditional ; Retrospective Studies

Homo- or heterodimeric compounds that affect dimeric protein function through interaction between monomeric moieties and protein subunits can serve as valuable sources of potent and selective drug candidates. Here, we screened an in-house dimeric natural product collection, and panepocyclinol A (PecA) emerged as a selective and potent STAT3 inhibitor with profound anti-tumor efficacy. Through cross-linking C712/C718 residues in separate STAT3 monomers with two distinct Michael receptors, PecA inhibits STAT3 DNA binding affinity and transcription activity. Molecular dynamics simulation reveals the key conformation changes of STAT3 dimers upon the di-covalent binding with PecA that abolishes its DNA interactions. Furthermore, PecA exhibits high efficacy against anaplastic large T cell lymphoma in vitro and in vivo, especially those with constitutively activated STAT3 or STAT3^Y640F. In summary, our study describes a distinct and effective di-covalent modification for the dimeric compound PecA to disrupt STAT3 function.

Inflammatory diseases (IDs) are a general term of diseases characterized by chronic inflammation as the primary pathogenetic mechanism, which seriously affect the quality of patient′s life and cause significant social and medical burden. Current drugs for IDs include nonsteroidal anti-inflammatory drugs, corticosteroids, immunomodulators, biologics, and antioxidants, but these drugs may cause gastrointestinal side effects, induce or worsen infections, and cause non-response or intolerance. Given the outstanding performance of metal polyphenol network (MPN) in the fields of drug delivery, biomedical imaging, and catalytic therapy, its application in the diagnosis and treatment of IDs has attracted much attention and significant progress has been made. In this paper, we first provide an overview of the types of IDs and their generating mechanisms, then sort out and summarize the different forms of MPN in recent years, and finally discuss in detail the characteristics of MPN and their latest research progress in the diagnosis and treatment of IDs. This research may provide useful references for scientific research and clinical practice in the related fields.

BACKGROUND:Implant restoration has become an important means to treat anterior tooth loss,and it is particularly important to select appropriate implant restoration materials.However,at present,there are some deficiencies in clinical implant materials,and researchers have been exploring suitable implant materials.OBJECTIVE:To compare the biomechanical characteristics of implants made of different materials in restoring single missing maxillary anterior teeth.METHODS:The cone beam CT data of a patient with single maxillary central incisor loss were imported into 3-matic software to establish a three-dimensional finite element analysis model of single maxillary anterior tooth loss.The model was then imported into Marc Mentat.Eight sets of implant restoration models were designed according to different implant materials(polyetheretherketone,titanium-zirconium alloy,titanium alloy,and zirconia,with the elastic modulus of the four materials increasing in sequence)and cancellous bone density(high density,low density)to simulate the stress conditions of the maxillary anterior teeth in centric occlusion.The total displacements and von Mises stresses of implants,cortical bone stresses and cancellous bone strains were compared and analyzed.RESULTS AND CONCLUSION:(1)The maximum displacement of the implant gradually decreased with the increase of the modulus of elasticity of the material,and the value of the maximum displacement of the implant in the polyetheretherketone group exceeded 10 μm;the implant stress was concentrated in the labial neck in the models.The maximum stress gradually increased with the increase of the modulus of elasticity of the implant material,among which,the zirconia-low density bone model had the highest stress,which was 21.31 MPa;the cortical bone stress was concentrated in the cortical bone at the junction of the implant with the labial side,and the polyetheretherketone-low density bone group had the highest value,which was 29.90 MPa.(2)From the biomechanical point of view,titanium-zirconium alloy,titanium alloy,and zirconia can be used as implant materials for restoration of a single missing anterior tooth,and implant displacement is one of the common problems during implant restorations,but pure polyetheretherketone material may cause excessive implant displacement in implant restorations of anterior areas,causing implant failure.

BACKGROUND:Implant restoration has become an important means to treat anterior tooth loss,and it is particularly important to select appropriate implant restoration materials.However,at present,there are some deficiencies in clinical implant materials,and researchers have been exploring suitable implant materials.OBJECTIVE:To compare the biomechanical characteristics of implants made of different materials in restoring single missing maxillary anterior teeth.METHODS:The cone beam CT data of a patient with single maxillary central incisor loss were imported into 3-matic software to establish a three-dimensional finite element analysis model of single maxillary anterior tooth loss.The model was then imported into Marc Mentat.Eight sets of implant restoration models were designed according to different implant materials(polyetheretherketone,titanium-zirconium alloy,titanium alloy,and zirconia,with the elastic modulus of the four materials increasing in sequence)and cancellous bone density(high density,low density)to simulate the stress conditions of the maxillary anterior teeth in centric occlusion.The total displacements and von Mises stresses of implants,cortical bone stresses and cancellous bone strains were compared and analyzed.RESULTS AND CONCLUSION:(1)The maximum displacement of the implant gradually decreased with the increase of the modulus of elasticity of the material,and the value of the maximum displacement of the implant in the polyetheretherketone group exceeded 10 μm;the implant stress was concentrated in the labial neck in the models.The maximum stress gradually increased with the increase of the modulus of elasticity of the implant material,among which,the zirconia-low density bone model had the highest stress,which was 21.31 MPa;the cortical bone stress was concentrated in the cortical bone at the junction of the implant with the labial side,and the polyetheretherketone-low density bone group had the highest value,which was 29.90 MPa.(2)From the biomechanical point of view,titanium-zirconium alloy,titanium alloy,and zirconia can be used as implant materials for restoration of a single missing anterior tooth,and implant displacement is one of the common problems during implant restorations,but pure polyetheretherketone material may cause excessive implant displacement in implant restorations of anterior areas,causing implant failure.

Objective To investigate the effect and mechanism of hypericin on osteoporosis(OP)in rats with chronic obstructive pulmonary disease(COPD).Methods COPD combined with OP rat model was established by cigarette combined with bacteria.The rats were randomly divided into control group,model group(COPD combined with OP model was constructed),experimental-L group(50 mg·kg-1 hypericin was given by intragastric administration after constructing COPD combined with OP model),experimental-H group(100 mg·kg-1 hypericin was given intragastric administration after constructing COPD combined with OP model),positive group(subcutaneous injection of 16 U·kg-1 salmon calcitonin after constructing COPD combined with OP model);each group was given 12 rats for 90 days.The lung function of rats was detected by pulmonary function apparatus;bone mineral density(BMD)was detected by micro-computed tomography(CT);serum bone metabolism and inflammatory factors were detected by enzyme-linked immunosorbent assay(ELISA);Western blot assay was used to detect the relevant indicators of the pathway.Results The levels of forced vital capacity(FVC)in control group,model group,experimental-H group and positive group were(10.42±1.40),(4.10±0.60),(6.75±0.37),(4.18±0.33)mL,respectively;BMD levels were(0.31±0.04),(0.12±0.02),(0.28±0.03),(0.29±0.04)g·mm-3,respectively;bone alkaline phosphatase(BALP)levels were(200.04±20.03),(80.80±6.00),(148.16±14.23),(173.97±23.55)U·L1,respectively;interleukin-1β(IL-1β)levels were(122.60±8.70),(695.59±74.84),(422.41±44.86),(527.90±39.36)pg·mL-1,respectively;phosphorylated p38 mitogen-activated protein kinase(p-P38)protein expression levels were 0.99±0.11,0.36±0.05,0.79±0.08,0.36±0.04,respectively.Compared with the control group,the above indexes in the model group had statistical significance(all P＜0.05);the above indexes in experimental-H group were significantly different from those in model group(all P＜0.05).Conclusion Hypericin can inhibit inflammatory response,improve bone metabolism and biomechanics.

Objective To develop a portable medical oxygen purity analyzer capable of real-time detection of multi-compo-nent gases in medical oxygen or aviation oxygen to ensure the safety of oxygen consumption.Methods The portable medical oxygen purity analyzer with STM3F103RC as the main controller involved in a management module,an oxygen detection module,a carbon monoxide/chlorine detection module,a flow/carbon dioxide detection module and a dew point detection module as its hardware components,which had its human-machine interface programmed with DGUS supervision,control and data acquisition(SCADA)software and system program developed with C language under Keil MDK environment.The performance verification of the analyzer developed was carried out in terms of oxygen detection error and stability and errors for measuring carbon monoxide,chlorine and carbon dioxide.Results The analyzer showed high precision when used to detect oxygen with high volume fraction,with long-term stability and the absolute error restrained within±0.1％;the erros for measuring carbon monoxide,chlorine and carbon dioxide were all limited within±5％FS to meet the desired requirements.Condusion The portable medical oxygen purity analyzer developed with high precision,stability and portability can be used for detection of medical oxygen and aviation oxygen.[Chinese Medical Equipment Journal,2024,45(3):36-40]

Objective:To understand the epidemiological characteristics of human respiratory syncytial virus (HRSV) among acute respiratory infection (ARI) cases in 16 provinces of China from 2009 to 2023.Methods:The data of this study were collected from the ARI surveillance data from 16 provinces in China from 2009 to 2023, with a total of 28 278 ARI cases included in the study. The clinical specimens from ARI cases were screened for HRSV nucleic acid from 2009 to 2023, and differences in virus detection rates among cases of different age groups, regions, and months were analyzed.Results:A total of 28 278 ARI cases were enrolled from January 2009 to September 2023. The age of the cases ranged from<1 month to 112 years, and the age M ( Q1, Q3) was 3 years (1 year, 9 years). Among them, 3 062 cases were positive for HRSV nucleic acid, with a total detection rate of 10.83%. From 2009 to 2019, the detection rate of HRSV was 9.33%, and the virus was mainly prevalent in winter and spring. During the Corona Virus Disease 2019 (COVID-19) pandemic, the detection rate of HRSV fluctuated between 6.32% and 18.67%. There was no traditional winter epidemic peak of HRSV from the end of 2022 to the beginning of 2023, and an anti-seasonal epidemic of HRSV occurred from April to May 2023. About 87.95% (2 693/3 062) of positive cases were children under 5 years old, and the difference in the detection rate of HRSV among different age groups was statistically significant ( P<0.001), showing a decreasing trend of HRSV detection rate with the increase of age ( P<0.001). Among them, the HRSV detection rate (25.69%) was highest in children under 6 months. Compared with 2009-2019, the ranking of HRSV detection rates in different age groups changed from high to low between 2020 and 2023, with the age M (Q1, Q3) of HRSV positive cases increasing from 1 year (6 months, 3 years) to 2 years (11 months, 3 years). Conclusion:Through 15 years of continuous HRSV surveillance analysis, children under 5 years old, especially infants under 6 months old, are the main high-risk population for HRSV infection. During the COVID-19 pandemic, the prevalence and patterns of HRSV in China have changed.