OBJECTIVE To establish a Chinese drug-related problem （DRP） classification system applicable to pharmacist-led pharmaceutical care in China， providing pharmacists with an effective and practical tool for pharmaceutical care. METHODS A multi-stage process was employed to construct the DRP classification system， including literature review and analysis， comparison of existing classification systems， refinement of classification items and framework development， two rounds of standard case validation， expert discussion， and system revision. The Fleiss′ kappa test was used to calculate the consistency coefficient κ， assessing the reliability of pharmacists participating in evaluating the classification system. An electronic questionnaire comprising six items was employed to evaluate the system’s applicability. RESULTS The constructed Chinese DRP classification system comprised six sections [problem（including potential problems）， DRP evaluation， cause （including possible causes of potential problems）， intervention， acceptance of intervention and DRP status]， with 24 primary codes and 96 secondary codes. In the first round of case validation， κ values exceeded 0.4 for all sections except “intervention” and “DRP status”. In the second round， κ values exceeded 0.4 for all sections. In the applicability evaluation of the classification system， positive ratings （“strongly agree” or “agree”） exceeded 85% for all items. Specifically， positive ratings for“the classification system can provide appropriate category selection”，“ the classification system is comprehensive”，“ the classification system is convenient to use” and “the classification system is highly satisfactory” exceeded 92%. CONCLUSIONS The Chinese DRP classification system developed demonstrates both high reliability and applicability， providing an effective and practical classification tool for pharmacists in China to conduct pharmaceutical care.

Objective To explore the effects of the disinfection port position and diameter and disinfectant concentration on the in-situ decontamination of the flow field-based biosafety high efficiency particulate air filter device with the computational fluid dynamics(CFD)method.Methods ANSYS DesignModeler was used to construct five models for the high efficiency particulate air filter device with the disinfection port at the side end in four ones and upper end in the remained one model,with the diameter being 70,100,150,260 and 260 mm respectively;secondly,a standard k-ε turbulence model was applied to simulating the velocity field and concentration field inside the high efficiency particulate air filter device,so as to analyze the influence of the vortex position inside the device and the structure of the device on the disinfection effect and to determine the optimal structure of the device;finally,H2O2 with the concentration of 0.45,0.35 or 0.30 mol/L was selected as the disinectant to investigate the effect of the disinfectant concentration on the disinfection under the optimal device structure.Results Simulation showed that there were vortexes existed the cavity between the filter compression structure and the filter of the high efficiency particulate air filter device.The disinfection effect in case of the disinfection port at the side end was higher than that in case of the disinfection port at the upper end;the diameter of the disinfection port had influences on the disinfection effect,and high-concentration disinfectant was found in the device when the diameter was 100 mm.The optimal structure with the disinfection port at the side end and the diameter of 100 mm was determined for the high efficiency particulate air filter device.An increase in H2O2 concentration was beneficial to improve disinfection without corroding and damaging the device when the in-situ decontamination of the flow field-based biosafety high efficiency particulate air filter device was carried out.Conclusion The characteristics of the internal flow field of the flow field-based biosafety high efficiency particulate air filter device and the influencing factors of the in-situ disinfection effect are revealed,and theoretical references are provided for the optimal design of the device.[Chinese Medical Equipment Journal,2025,46(9):22-27]

Objective To explore the effects of the disinfection port position and diameter and disinfectant concentration on the in-situ decontamination of the flow field-based biosafety high efficiency particulate air filter device with the computational fluid dynamics(CFD)method.Methods ANSYS DesignModeler was used to construct five models for the high efficiency particulate air filter device with the disinfection port at the side end in four ones and upper end in the remained one model,with the diameter being 70,100,150,260 and 260 mm respectively;secondly,a standard k-ε turbulence model was applied to simulating the velocity field and concentration field inside the high efficiency particulate air filter device,so as to analyze the influence of the vortex position inside the device and the structure of the device on the disinfection effect and to determine the optimal structure of the device;finally,H2O2 with the concentration of 0.45,0.35 or 0.30 mol/L was selected as the disinectant to investigate the effect of the disinfectant concentration on the disinfection under the optimal device structure.Results Simulation showed that there were vortexes existed the cavity between the filter compression structure and the filter of the high efficiency particulate air filter device.The disinfection effect in case of the disinfection port at the side end was higher than that in case of the disinfection port at the upper end;the diameter of the disinfection port had influences on the disinfection effect,and high-concentration disinfectant was found in the device when the diameter was 100 mm.The optimal structure with the disinfection port at the side end and the diameter of 100 mm was determined for the high efficiency particulate air filter device.An increase in H2O2 concentration was beneficial to improve disinfection without corroding and damaging the device when the in-situ decontamination of the flow field-based biosafety high efficiency particulate air filter device was carried out.Conclusion The characteristics of the internal flow field of the flow field-based biosafety high efficiency particulate air filter device and the influencing factors of the in-situ disinfection effect are revealed,and theoretical references are provided for the optimal design of the device.[Chinese Medical Equipment Journal,2025,46(9):22-27]

Immobilized enzyme-based enzyme electrode biosensors, characterized by high sensitivity and efficiency, strong specificity, and compact size, demonstrate broad application prospects in life science research, disease diagnosis and monitoring, etc. Immobilization of enzyme is a critical step in determining the performance (stability, sensitivity, and reproducibility) of the biosensors. Random immobilization (physical adsorption, covalent cross-linking, etc.) can easily bring about problems, such as decreased enzyme activity and relatively unstable immobilization. Whereas, directional immobilization utilizing amino acid residue mutation, affinity peptide fusion, or nucleotide-specific binding to restrict the orientation of the enzymes provides new possibilities to solve the problems caused by random immobilization. In this paper, the principles, advantages and disadvantages and the application progress of enzyme electrode biosensors of different directional immobilization strategies for enzyme molecular sensing elements by specific amino acids (lysine, histidine, cysteine, unnatural amino acid) with functional groups introduced based on site-specific mutation, affinity peptides (gold binding peptides, carbon binding peptides, carbohydrate binding domains) fused through genetic engineering, and specific binding between nucleotides and target enzymes (proteins) were reviewed, and the application fields, advantages and limitations of various immobilized enzyme interface characterization techniques were discussed, hoping to provide theoretical and technical guidance for the creation of high-performance enzyme sensing elements and the manufacture of enzyme electrode sensors.

Objective To observe the difference of bone micro-structure in different regions of proximal femur,micro-CT scanning was performed on 30 proximal femur specimens to explain the mechanism of proximal femur fracture and to provide anatomical basis for prosthesis design.Methods Totally 30 intact proximal femur specimens were obtained from 60-80 year-old cadavers.Micro-CT scanning was used to measure the trabecular thickness(Tb.Th),trabecular number(Tb.N),trabecular space(Tb.Sp),connectivity(Conn)and bone mineral density(BMD)and other parameters in 7 regions of proximal femur,including proximal pressure trabecular(PPT),distal pressure trabecular(DPT),femoral head-neck junction(FHNJ),head and neck of femoral neck(HNFN),the base of femoral neck(BPFN),intertrochanteric line(IL)and greater trochanter(GT).Results The bone mineral density of IL and GT were higher than those of BPFN,FHNJ,DPT and PPT.The trabecular thickness of GT was the largest,followed by IL,BPFN and HNFN,and the smallest was FHNJ,DPT and PPT.The trabecular space of IL was larger than that of GT,and the data of both were larger than those of other parts,among which DPT and PPT were the smallest.The trabecular number of IL and GT were the smallest,BPFN,HNFN and FHNJ were larger,and DPT was the largest.The volume fraction of IL was the smallest,BPFN and HNFN were larger,DPT and PPT were the largest.Conclusion The bone density,trabecular thickness,bone volume,and total volume of GT and IL in the proximal femur of elderly patients are all relatively large,so the reason for the high incidence of fractures is not due to weak internal bone microstructure;The bone density,trabecular thickness,and trabecular gap at the proximal and distal ends of the vertical trabecular bone are relatively small.If it is necessary to perform core decompression for prosthesis filling at this location,the design should be conducive to the mechanical conduction of the prosthesis and the regeneration of surrounding bone tissue.

Objective: To analyze the association between different sleep statuses and overweight/obesity among primary school students, so as to provide a basis for the development of childhood overweight and obesity prevention and control strategies. Methods: In November 2023, a total of 3 391 primary school students of grade 1-6 from seven schools in Baoan District, Shenzhen, were surveyed by questionnaires and physical examinations by using multistage cluster sampling. The Logistic regression analysis was used to explore the association between primary school students sleep status and overweight/obesity. Results: The detection rate of overweight/obesity in primary school students was 22.59%, the detection rate of overweight/obesity in boys (27.04%) was higher than that in girls (17.44%), the only child (25.81%) had higher rates than nononly child (21.76%), and the differences were statistically significant (χ2=51.48, 5.98, P＜0.05). Multivariate Logistic regression analysis showed that, after controlling for confounders, primary school students weekend nighttime sleep duration (OR=0.83, 95%CI=0.75-0.91), weekly average nighttime sleep duration (OR=0.76,95%CI=0.64-0.89), and weekend compensated sleep duration (OR=0.89,95%CI=0.81-0.97) were negatively associated with the risk of developing overweight/obesity (P＜0.05). Compared with to primary school students with school days nap durations <0.5 h, those whose napped for 0.5-＜1 h and ≥1 h on school days had a 20% (OR=1.20, 95%CI=1.02-1.42) and 37% (OR=1.37, 95%CI=1.02-1.83) increased risk of overweight/obesity, respectively (P＜0.05). Conclusions Increasing weekend nighttime sleep duration, average weekly nighttime sleep duration, and weekend compensatory sleep duration can reduce the risk of overweight and obesity in primary school students. School days nap duration is a risk factor for overweight/obesity among primary school students.

Acute respiratory distress syndrome (ARDS) is a common respiratory emergency, but current clinical treatment remains at the level of symptomatic support and there is a lack of effective targeted treatment measures. Our previous study confirmed that inhalation of hydrogen gas can reduce the acute lung injury of ARDS, but the application of hydrogen has flammable and explosive safety concerns. Drinking hydrogen-rich liquid or inhaling hydrogen gas has been shown to play an important role in scavenging reactive oxygen species and maintaining mitochondrial quality control balance, thus improving ARDS in patients and animal models. Coral calcium hydrogenation (CCH) is a new solid molecular hydrogen carrier prepared from coral calcium (CC). Whether and how CCH affects acute lung injury in ARDS remains unstudied. In this study, we observed the therapeutic effect of CCH on lipopolysaccharide (LPS) induced acute lung injury in ARDS mice. The survival rate of mice treated with CCH and hydrogen inhalation was found to be comparable, demonstrating a significant improvement compared to the untreated ARDS model group. CCH treatment significantly reduced pulmonary hemorrhage and edema, and improved pulmonary function and local microcirculation in ARDS mice. CCH promoted mitochondrial peripheral division in the early course of ARDS by activating mitochondrial thioredoxin 2 (Trx2), improved lung mitochondrial dysfunction induced by LPS, and reduced oxidative stress damage. The results indicate that CCH is a highly efficient hydrogen-rich agent that can attenuate acute lung injury of ARDS by improving the mitochondrial function through Trx2 activation.

Microglia, the resident immune cells in the central nervous system (CNS), rapidly transition from a resting to an active state in the acute phase of ischemic brain injury. This active state mediates a pro-inflammatory response that can exacerbate the injury. Targeting the pro-inflammatory response of microglia in the semi-dark band during this acute phase may effectively reduce brain injury. Shionone (SH), an active ingredient extracted from the dried roots and rhizomes of the genus Aster (Asteraceae), has been reported to regulate the inflammatory response of macrophages in sepsis-induced acute lung injury. However, its function in post-stroke neuroinflammation, particularly microglia-mediated neuroinflammation, remains uninvestigated. This study found that SH significantly inhibited lipopolysaccharide (LPS)-induced elevation of inflammatory cytokines, including interleukin-1β (IL-1β), tumor necrosis factor-α (TNF-α), and inducible nitric oxide synthase (iNOS), in microglia in vitro. Furthermore, the results demonstrated that SH alleviated infarct volume and improved behavioral performance in middle cerebral artery occlusion (MCAO) mice, which may be attributed to the inhibition of the microglial inflammatory response induced by SH treatment. Mechanistically, SH potently inhibited the phosphorylation of serine-threonine protein kinase B (AKT), mammalian target of rapamycin (mTOR), and signal transducer and activator of transcription 3 (STAT3). These findings suggest that SH may be a potential therapeutic agent for relieving ischemic stroke (IS) by alleviating microglia-associated neuroinflammation.
Animals ; Microglia/immunology* ; Mice ; Male ; Mice, Inbred C57BL ; Brain Ischemia/immunology* ; Neuroinflammatory Diseases/drug therapy* ; Neuroprotective Agents/administration & dosage* ; Interleukin-1beta/genetics* ; STAT3 Transcription Factor/genetics* ; TOR Serine-Threonine Kinases/genetics* ; Tumor Necrosis Factor-alpha/genetics* ; Proto-Oncogene Proteins c-akt/immunology* ; Nitric Oxide Synthase Type II/genetics* ; Lipopolysaccharides

OBJECTIVE: We aimed to investigate the patterns of fasting blood glucose (FBG) trajectories and analyze the relationship between various occupational hazard factors and FBG trajectories in male steelworkers. METHODS: The study cohort included 3,728 workers who met the selection criteria for the Tanggang Occupational Cohort (TGOC) between 2017 and 2022. A group-based trajectory model was used to identify the FBG trajectories. Environmental risk scores (ERS) were constructed using regression coefficients from the occupational hazard model as weights. Univariate and multivariate logistic regression analyses were performed to explore the effects of occupational hazard factors using the ERS on FBG trajectories. RESULTS: FBG trajectories were categorized into three groups. An association was observed between high temperature, noise exposure, and FBG trajectory ( P < 0.05). Using the first quartile group of ERS1 as a reference, the fourth quartile group of ERS1 had an increased risk of medium and high FBG by 1.90 and 2.21 times, respectively (odds ratio [ OR] = 1.90, 95% confidence interval [ CI]: 1.17-3.10; OR = 2.21, 95% CI: 1.09-4.45). CONCLUSION An association was observed between occupational hazards based on ERS and FBG trajectories. The risk of FBG trajectory levels increase with an increase in ERS.
Humans ; Male ; Adult ; Blood Glucose/analysis* ; China ; Prospective Studies ; Occupational Exposure/adverse effects* ; Risk Factors ; Middle Aged ; Steel ; Fasting/blood* ; Metal Workers ; East Asian People

Recent studies have shown that an imbalance in iron metabolism can affect the composition and microstructural changes of bone, disrupting bone homeostasis and leading to osteoporosis(OP). The imbalance in iron metabolism, along with its induced local abnormal microenvironment and cellular iron death, has become a new focal point in OP research, drawing increasing attention from the academic community regarding the regulation of iron metabolism to prevent and manage OP. From the perspective of traditional Chinese medicine(TCM), iron metabolism imbalance has potential connections to TCM theories regarding internal organs, as well as treatments aimed at tonifying the kidney, strengthening the spleen, and activating blood circulation. Evidence is continually emerging that TCMs and effective components that tonify the kidney, strengthen the spleen, and activate blood circulation can prevent and manage OP by regulating iron metabolism. This article analyzes the relationship between iron and bone, as well as the effects of TCM formulations on improving iron metabolism and influencing bone metabolism, from the perspectives of iron metabolism mechanisms and TCM interventions, aiming to broaden existing clinical strategies for prevention and treatment and inject new momentum into the field of OP as it moves into a new era.
Osteoporosis/drug therapy* ; Humans ; Iron/metabolism* ; Drugs, Chinese Herbal/pharmacology* ; Animals ; Medicine, Chinese Traditional ; Bone and Bones/drug effects*