OBJECTIVE To construct a closed-loop management model for externally dispensed intravenous prescriptions， and to provide reference for standardized management of externally dispensed intravenous prescriptions. METHODS Based on the Expert Consensus on Closed-loop Management of Externally Dispensed Intravenous Prescriptions in Guangxi Zhuang Autonomous Region previously formulated by our hospital， risk points during the entire process were systematically identified through multidisciplinary team brainstorming and a fishbone diagram. A series of strategies were subsequently formulated and implemented， including qualifying designated external dispensing pharmacies and the drug catalogs， operating and maintaining the hospital information system and the Pharmacy Intravenous Admixture Service （PIVAS） intelligent management platform， and strengthening differentiated training for staff in the whole workflow. A whole-process closed-loop management system was constructed with PIVAS as the co re hub and the daytime chemotherapy center as the safety terminal. RESULTS A total of 3 cooperating pharmacies and an initial drug list comprising 35 product specifications were selected. A closed‑loop management process encompassing hospital outpatient prescribing， patient drug purchase in designated pharmacies， PIVAS drug dispensing， and medication use in daytime chemotherapy center was successfully established. This system enabled the mandatory grouping and association of externally dispensed intravenous prescriptions with in-hospital diluents， full-process verification based on drug traceability codes， intelligent monitoring of infusion parameters， and whole-process data traceability. CONCLUSIONS The constructed model effectively resolves the coordination and safety oversight during the use of externally dispensed intravenous drugs from out-of-hospital circulation to in-hospital use， and has preliminarily enabled procedural standardization， whole-process information traceability， and proactive control of medication risks.

Objective To investigate the distribution characteristics of Oncomelania hupensis snails in Yunnan Province fol-lowing interruption of schistosomiasis transmission, so as to provide the evidence for assessing the risk of schistosomiasis transmission and scientifically formulating the schistosomiasis surveillance program. Methods According to the requirements of the National Schistosomiasis Surveillance Scheme (2020 Edition), O. hupensis snail surveillance data were collected from 18 schistosomiasis-endemic counties (cities, districts) in Yunnan Province from 2020 to 2024, including area of snail survey, area of snail habitats, area of re-emerging snail habitats, number of frames surveyed, number of frames with O. hupensis snails, number of O. hupensis snails captured, and number of living snails, and the occurrence of frames with snails and mean density of living snails were calculated. Changes in snail status over the 5-year period from 2020 to 2024 and the differences in snail distributions specified by epidemic intensity, environmental type, and vegetation type were analyzed. Results The areas of snail survey increased from 1 727.96 hm² in 2020 to 3 894.45 hm² in 2024 (peak) across 18 schistosomiasis-endemic counties (cities, districts) in Yunnan Province during the period from 2020 through 2024. The areas of snail habitats increased from 70.36 hm² in 2020 to a peak in 2023 (172.04 hm²), followed by a reduction to 132.36 hm² in 2024, and the areas of re-emerging snail habitats increased from 42.71 hm² in 2020 to a peak in 2022 (78.43 hm²), followed by a reduction to 40.21 hm² in 2024. The occurrence of frames with snails and mean density of living snails increased from 1.24% (3 025/244 404) and (0.033 2 ± 0.038 7) snails/0.1 m² in 2020 to peaks at 2.03% (6 231/307 563) and (0.066 9 ± 0.068 4) snails/0.1 m² in 2023, followed by reductions to 1.04% (5 829/559 941) and (0.032 6 ± 0.057 7) snails/0.1 m² in 2024, respectively. There was a significant difference in the occurrence of frames with snails over the 5-year study period (χ² = 1 962.95, P < 0.05), and the occurrence of frames with snails reduced by 48.71% in 2024 relative to in 2023 (χ² = 1 411.05, P < 0.005); however, there was no significant difference in the mean density of living snails over the 5 years (H = 5.310, P > 0.05). There were significant differences in the occurrence of frames with snails (χ² = 481.27, P < 0.05) and mean density of living snails (H = 6.872, P < 0.05) in schistosomiasis-endemic areas with different epidemic intensities. The occurrence of frames with snails (χ² = 25.32 and 38.70, both P values < 0.017) and mean density of living snails (Z = 28.55 and 49.96, both P values < 0.017) were higher in schistosomiasis transmission-interrupted and eliminated areas with snails than in schistosomiasis-eliminated areas without snails, and the occurrence of frames with snails (χ² = 453.54, P < 0.017) and mean density of living snails (Z = −56.97, P < 0.017) were higher in schistosomiasis-eliminated areas with snails than in schistosomiasis transmission-interrupted areas with snails. O. hupensis snails were mainly distributed in paddy fields, dry farmlands and ditches; however, the occurrence of frames with snails (13.40%, 424/3 164) and mean density of living snails [(0.252 8 ± 0.158 7) snails/0.1 m²] were higher in ponds/weirs than in other types of environments (both P values < 0.05). Rice, dry farmland crops and weeds were main vegetations in which O. hupensis snails were distributed, and the occurrence of frames with snails (2.29%, 7 111/310 140) and mean density of living snails [(0.072 3 ± 0.018 9) snails/0.1 m²] were higher in weeds than in other types of environments (both P values < 0.05). Conclusions O. hupensis snails have been effectively controlled in Yunnan Province following implementation of integrated schistosomiasis control measures; however, there are still risk factors for schistosomiasis transmission, including reduced attention to schistosomiasis control and snail re-emergence. Improved control efforts and surveillance system construction and timely identification of risk factors of snail status and timely management are recommended to ensure the achievement of the target of schistosomiasis elimination as scheduled.

This consensus focuses on the clinical application of domestic ultra-high-definition (UHD) medical endoscopes in cardiovascular surgery, addressing their clinical value, key technical aspects, and strategies for broader implementation. It traces the evolution of domestic endoscopic platforms from high-resolution imaging toward integrated advanced functionalities such as fluorescence imaging, three-dimensional visualization, and intelligent assistance. The document outlines standardized procedural steps and perioperative management pathways for minimally invasive endoscopic cardiovascular surgery and summarizes specific application scenarios and technical considerations in congenital heart disease, valvular disorders, coronary artery disease, arrhythmias, and cardiac tumors. Furthermore, recommendations are provided regarding professional training, multicenter collaboration, the establishment of clinical evaluation systems, and coordinated policy-industry support to promote standardized adoption and high-quality dissemination of domestic medical devices. Based on available evidence and expert agreement, 16 consensus statements are presented, aiming to offer authoritative and actionable guidance for clinical practice.

Objective To investigate the effect of long non-coding RNA(lncRNA)potassium voltage-gated channel subfamily Q member 1 overlapping transcript 1(KCNQ1OT1)on oxidative glucose deprivation/reoxygenation(OGD/R)-induced microglia injury through regulating the miR-145-5p/Rho-associated coiled-coil forming protein kinase 1(ROCK1)axis.Methods Microglia N9 were divided into the control group(normal culture),the OGD/R group(OGD/R-induced injury),the sh-NC group(transfected with sh-NC after OGD/R-induced injury),the sh-KCNQ1OT1 group(transfected with sh-KCNQ1OT1 after OGD/R-induced injury),the sh-KCNQ1OT1+inhibitor NC group(co-transfected with sh-KCNQ1OT1 and inhibitor NC after OGD/R-induced injury),and the sh-KCNQ1OT1+miR-145-5p inhibitor group(co-transfected with sh-KCNQ1OT1 and miR-145-5p inhibitor after OGD/R-induced injury).RT-qPCR was applied to detect the expression of lncRNA KCNQ1OT1,miR-145-5p,and ROCK1 mRNA in cells.The expression of ROCK1 protein was detected by Western blot.CCK-8 was applied to detect the cell proliferation.Flow cytometry was applied to detect cell apoptosis.ELISA was applied to detect the levels of interleukin-1β(IL-1β),tumor necrosis factor-α(TNF-α),and interleukin-6(IL-6)in cells.The action sites of miR-145-5p with lncRNA KCNQ1OT1 and ROCK1 were predicted by bioinformatics website,and their targeting relationships were verified by dual-luciferase reporter assay.Results Compared with the control group,the expression of lncRNA KCNQ1OT1,the expression of ROCK1 mRNA and protein,the apoptosis rate,and the levels of IL-6,TNF-α,and IL-1β in cells were all increased,and the level of miR-145-5p and cell survival rate were all decreased in the OGD/R group(P<0.05).Compared with the OGD/R group and the sh-NC group,the expression of lncRNA KCNQ1OT1,the expression of ROCK1 mRNA and protein,the apoptosis rate,and the levels of IL-6,TNF-α,and IL-1β in cells were all decreased,and the level of miR-145-5p and cell survival rate were all increased in the sh-KCNQ1OT1 group,with significant differences(P<0.05).Compared with the sh-KCNQ1OT1+inhibitor NC group,the expression of ROCK1 mRNA and protein,the apoptosis rate,and the levels of IL-6,TNF-α,and IL-1β in cells were all increased,and the expression of miR-145-5p and cell survival rate were all decreased in the sh-KCNQ1OT1+miR-145-5p inhibitor group,with significant differences(P<0.05).Bioinformatics website showed that miR-145-5p had targeted action sites with lncRNA KCNQ1OT1 and ROCK1,and dual-luciferase reporter assay confirmed that miR-145-5p had targeting relationships with lncRNA KCNQ1OT1 and ROCK1(P<0.05).Conclusion Silencing lncRNA KCNQ1OT1 can alleviate OGD/R-induced microglia injury via upregulating the expression of miR-145-5p and targeting the down-regulation of ROCK1 expression.

To formulate an expert consensus on the principles of preoperative hair removal and provide scientific guidance for standardized removal of hair before surgical procedures so as to reduce the incidence of surgical site infections.METHODS Led by the Hospital Management Institute of National Health Commission of the People's Republic of China,this consensus was reached with the joint efforts from the expects of relevant fields such as surgeries,interventional therapies,nursing,and infection prevention and control.The consensus facilitates the classification and evaluation of literatures by following the evidence grade formulated by Oxford Evidence-based Medicine Center and focuses on the association of preoperative hair removal with surgical site infection,it reaches the evidence grade of expert consensus and recommendation intensity by integrating with discussions on meetings and clinical experience of the expects from relevant fields.RESULTS A total of 6 items of consensus were reached by summarizing the latest evidence on the aspects including the indications for preoperative hair removal,tools,range,timing and places.CONCLUSION The consensus,to some extent,make supplements to and complete the exiting regulations and standards.It provides guidance for the medical institutions to carry out the preoperative hair removal.

To promote the effective implementation of China's Essential Public Health Services Program(EPHSP)and ensure the secure and efficient utilization of project funds,China officially initiated the performance evaluation of EPHSP in 2011.This performance evaluation has evolved through three distinct phases:initial exploration(2011-2014),steady advancement(2015-2018),and reform and enhancement(2019—present).The evaluation objectives have progressively expanded from an initial focus on fund security and service coverage to a broader emphasis on enhancing service quality,improving residents'health status and sense of benefit,and facilitating the refinement of policy frameworks and the implementation of primary responsibilities.Performance evaluation has emerged as a critical instrument for strengthening project governance and optimizing resource allocation,gradually establishing a performance-driven incentive mechanism that aligns rewards with both the quantity and quality of work.This approach has effectively contributed to the continuous improvement of service quality.To further advance the high-quality development of EPHSP,future efforts should optimize the performance evaluation system,prioritize the adoption of a full-cycle performance management approach and the integration of health outcome-based indicators.Additionally,it is essential to deepen the application of information technologies to enhance the precision and efficiency of evaluations,and to innovate mechanisms for utilizing evaluation results to reinforce accountability at the local level.These measures will collectively strengthen project performance management capabilities.

Nanchang University and Queen Mary University of London have integrated their educational and teaching advantageous resources to establish a Sino-foreign cooperative clinical medicine program in China. The program awards the degrees of Bachelor of Science in Biomedical Sciences and Bachelor of Clinical Medicine, aiming to cultivate well-rounded medical talents with both clinical and scientific research capabilities and an international perspective. By introducing biomedical courses and integrating them with basic medical courses, the program emphasizes basic knowledge, practical training, active learning, and the cultivation of scientific research skills and critical thinking ability. The evaluation parameters include academic output, innovation competitions, and the number of students pursuing graduate education. The results showed substantial increases in the number of SCI academic articles published by students in this program, the number of awards in innovation competitions, and the number of students pursuing graduate education. This program is a new attempt in the reform of medical education in China.

BACKGROUND:Implant restoration has become an important means to treat anterior tooth loss,and it is particularly important to select appropriate implant restoration materials.However,at present,there are some deficiencies in clinical implant materials,and researchers have been exploring suitable implant materials.OBJECTIVE:To compare the biomechanical characteristics of implants made of different materials in restoring single missing maxillary anterior teeth.METHODS:The cone beam CT data of a patient with single maxillary central incisor loss were imported into 3-matic software to establish a three-dimensional finite element analysis model of single maxillary anterior tooth loss.The model was then imported into Marc Mentat.Eight sets of implant restoration models were designed according to different implant materials(polyetheretherketone,titanium-zirconium alloy,titanium alloy,and zirconia,with the elastic modulus of the four materials increasing in sequence)and cancellous bone density(high density,low density)to simulate the stress conditions of the maxillary anterior teeth in centric occlusion.The total displacements and von Mises stresses of implants,cortical bone stresses and cancellous bone strains were compared and analyzed.RESULTS AND CONCLUSION:(1)The maximum displacement of the implant gradually decreased with the increase of the modulus of elasticity of the material,and the value of the maximum displacement of the implant in the polyetheretherketone group exceeded 10 μm;the implant stress was concentrated in the labial neck in the models.The maximum stress gradually increased with the increase of the modulus of elasticity of the implant material,among which,the zirconia-low density bone model had the highest stress,which was 21.31 MPa;the cortical bone stress was concentrated in the cortical bone at the junction of the implant with the labial side,and the polyetheretherketone-low density bone group had the highest value,which was 29.90 MPa.(2)From the biomechanical point of view,titanium-zirconium alloy,titanium alloy,and zirconia can be used as implant materials for restoration of a single missing anterior tooth,and implant displacement is one of the common problems during implant restorations,but pure polyetheretherketone material may cause excessive implant displacement in implant restorations of anterior areas,causing implant failure.

To formulate an expert consensus on the principles of preoperative hair removal and provide scientific guidance for standardized removal of hair before surgical procedures so as to reduce the incidence of surgical site infections.METHODS Led by the Hospital Management Institute of National Health Commission of the People's Republic of China,this consensus was reached with the joint efforts from the expects of relevant fields such as surgeries,interventional therapies,nursing,and infection prevention and control.The consensus facilitates the classification and evaluation of literatures by following the evidence grade formulated by Oxford Evidence-based Medicine Center and focuses on the association of preoperative hair removal with surgical site infection,it reaches the evidence grade of expert consensus and recommendation intensity by integrating with discussions on meetings and clinical experience of the expects from relevant fields.RESULTS A total of 6 items of consensus were reached by summarizing the latest evidence on the aspects including the indications for preoperative hair removal,tools,range,timing and places.CONCLUSION The consensus,to some extent,make supplements to and complete the exiting regulations and standards.It provides guidance for the medical institutions to carry out the preoperative hair removal.

BACKGROUND:Implant restoration has become an important means to treat anterior tooth loss,and it is particularly important to select appropriate implant restoration materials.However,at present,there are some deficiencies in clinical implant materials,and researchers have been exploring suitable implant materials.OBJECTIVE:To compare the biomechanical characteristics of implants made of different materials in restoring single missing maxillary anterior teeth.METHODS:The cone beam CT data of a patient with single maxillary central incisor loss were imported into 3-matic software to establish a three-dimensional finite element analysis model of single maxillary anterior tooth loss.The model was then imported into Marc Mentat.Eight sets of implant restoration models were designed according to different implant materials(polyetheretherketone,titanium-zirconium alloy,titanium alloy,and zirconia,with the elastic modulus of the four materials increasing in sequence)and cancellous bone density(high density,low density)to simulate the stress conditions of the maxillary anterior teeth in centric occlusion.The total displacements and von Mises stresses of implants,cortical bone stresses and cancellous bone strains were compared and analyzed.RESULTS AND CONCLUSION:(1)The maximum displacement of the implant gradually decreased with the increase of the modulus of elasticity of the material,and the value of the maximum displacement of the implant in the polyetheretherketone group exceeded 10 μm;the implant stress was concentrated in the labial neck in the models.The maximum stress gradually increased with the increase of the modulus of elasticity of the implant material,among which,the zirconia-low density bone model had the highest stress,which was 21.31 MPa;the cortical bone stress was concentrated in the cortical bone at the junction of the implant with the labial side,and the polyetheretherketone-low density bone group had the highest value,which was 29.90 MPa.(2)From the biomechanical point of view,titanium-zirconium alloy,titanium alloy,and zirconia can be used as implant materials for restoration of a single missing anterior tooth,and implant displacement is one of the common problems during implant restorations,but pure polyetheretherketone material may cause excessive implant displacement in implant restorations of anterior areas,causing implant failure.