ObjectiveThis study aimed to establish a monocrotaline （MCT）-induced pulmonary arterial hypertension （PAH） rat model to systematically evaluate the protective effect of Xiao Qinglongtang （XQLT） on right cardiac function in model rats and further elucidate the underlying regulatory mechanism. MethodsSixty male SD rats were randomly assigned to the normal group， model group， XQLT low-， medium-， and high-dose groups （XQLT-L/M/H）， and the beraprost sodium tablet group （BST）. Except for the normal group， rats in all other groups were given a single subcutaneous injection of MCT （60 mg·kg^-1） to induce PAH. Three weeks after injection， rats in the XQLT-L/M/H groups were administered XQLT intragastrically at 3.07， 6.14， 12.28 g·kg^-1·d^-1， respectively. Rats in the BST group received beraprost sodium at 12.6 μg·kg^-1·d^-1， and rats in the model group received an equal volume of saline. All treatments lasted for 3 weeks. Right ventricular systolic pressure （RVSP） was measured by right ventricular catheterization. Cardiac function was assessed by echocardiography. The right ventricle was weighed to calculate the right ventricular hypertrophy index （RVHI）. Hematoxylin-eosin （HE） staining， Masson staining， and transmission electron microscopy were used to observe myocardial morphology. Serum metabolomic changes were analyzed using ultra-performance liquid chromatography-tandem mass spectrometry （UPLC-MS/MS）. Data-independent acquisition （DIA） proteomics was used to detect differentially expressed （DE） proteins in the right ventricle， and Western blot was used to measure the expression of uncoupling protein 3 （UCP3）， phosphatidylinositol 3-kinase catalytic subunit p110α （PIK3CA）， L1 cell adhesion molecule （L1CAM）， and quinone oxidoreductase （CRYZ）. UPLC-MS/MS was used to analyze the chemical components of XQLT. ResultsCompared with the normal group， the model group showed significantly increased RVSP and RVHI （P<0.05）， along with pathological changes in myocardial morphology. Compared with the model group， all XQLT-treated groups exhibited reductions in RVSP and RVHI as well as significant improvements in cardiac function and myocardial morphology. Among the XQLT groups， XQLT-M showed the most pronounced effects （P<0.05）， comparable to the BST group. Serum metabolomics revealed 105 differential metabolites in the XQLT groups versus the model group ［variable importance in projection （VIP） >1， P<0.05］， including 58 upregulated and 47 downregulated metabolites. KEGG enrichment analysis indicated that XQLT intervention downregulated phenylalanine metabolism （P<0.01） and upregulated unsaturated fatty acid biosynthesis （P<0.05）. Proteomics analysis showed that 982 DE proteins were identified in the MCT groups versus the normal group， including 455 upregulated and 527 downregulated proteins （|fold change （FC）| >1.3， P<0.05）. Compared with the model group， 237 DE proteins were identified in the XQLT groups， including 124 upregulated and 113 downregulated proteins （|FC| >1.3， P<0.05）， with 57 overlapping DE proteins. KEGG enrichment suggested that XQLT mainly modulated pathways related to mineral absorption， ribosomal biogenesis， peroxisomes， glycolysis/gluconeogenesis， spliceosomes， and thyroid hormone signaling. Western blot analysis showed that， compared with the model group， XQLT increased the expression of UCP3， PIK3CA， and L1CAM， while decreasing the expression of CRYZ （P<0.05）. ConclusionXQLT exerts a protective effect on right heart function in MCT-induced PAH rats， and its mechanism is associated with maintaining myocardial homeostasis and alleviating right ventricular remodeling.

Objective To explore the role of neogambogic acid in the characteristics of colorectal cancer stem cells (CRC-CSCs) through the Wnt/β-catenin signaling pathway. Methods The colorectal cells SW480 and HCT166 were divided into control group and neogambogic acid groups (1.5, 3, 6, and 12 μmol/L). The viability of CRC-CSCs was determined by MTT method, and spheroid and clone formation assays were used to assess the capacity of spheroid formation and self-renewal ability of the cells. The effects of neogambogic acid on the apoptosis and cell cycle of CRC-CSCs were evaluated by flow cytometry assays. Real-time quantitative PCR was used to detect the mRNA expression levels of relative markers (CD133, CD44, ALDH1, Oct4, and Nanog) of CRC-CSCs, and the protein expression levels of the self-renewal marker (PCNA), apoptosis markers (cleaved caspase-3 and cleaved caspase-9), and Wnt/β-catenin signaling pathway markers (p-GSK3β, GSK3β, β-catenin, and Wnt) were analyzed using Western blot. Results Compared with the control group, after neogambogic acid treatment, the viability of SW480 and HCT116 cells decreased (P<0.05), the spheroid forming ability and the clone numbers of CRC-CSCs decreased (P<0.001, P<0.01) but the cell apoptosis rate increased (P<0.01), and cell cycle was arrested in G₀/G₁ phase. Moreover, neogambogic acid downregulated the mRNA and protein expression of relative markers of CRC-CSCs (CD133, CD44, ALDH1, Oct4, and Nanog), PCNA, p-GSK3β, β-catenin, and Wnt (P<0.05) and upregulated the expression of cleaved caspase-3, cleaved caspase-9, and GSK3β (P<0.01). Conclusion Neogambogic can inhibit the stem cell properties of colorectal cells via inhibition of Wnt/β-catenin signaling pathway. As a result, neogambogic acid may be an attractive agent against colorectal cancer.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

OBJECTIVE: To explore the function of LIM and calponin homology domains 1 (LIMCH1) in the development and progression of oral squamous cell carcinoma (OSCC), along with their potential clinical applications. METHODS: By utilizing transcriptome sequencing data from two groups of oral squamous cell carcinoma patients, along with bioinformatics analytical techniques such as Gene Ontology (GO) and gene co-expression networks, we identified genes that might play a pivotal role in the pathogenesis of oral squamous cell carcinoma. We employed real-time quantitative PCR and Western blotting to validate the expression patterns of these genes across twelve patient tissue samples. Furthermore, we conducted CCK-8 assays, flow cytometry analyses, and scratch wound healing assays to assess the impact of key genes on the biological behaviors of both the Cal27 oral squamous cell carcinoma cell line and the potentially malignant DOK oral lesion cell line. Additionally, we examined correlations between these key genes and clinical disease parameters in 214 oral squamous cell carcinoma patients using The Cancer Genome Atlas (TCGA) data; gene set enrichment analysis (GSEA) analysis results were also incorporated to enhance our findings from real-time quantitative PCR and Western blotting regarding potential mechanisms underlying the action of these key genes. RESULTS: The integrated analysis of sequencing data and bioinformatics revealed that LIMCH1 exhibited significantly reduced mRNA (P < 0.001) and protein levels (P < 0.01) in the oral squamous cell carcinoma tissues compared with normal control tissues. In the Cal27 cells, the low LIMCH1 level group demonstrated a larger wound healing area within 24 hours than the control group (P < 0.01), enhanced proliferation capacity over 72 hours relative to the control group (P < 0.01), and an increased apoptosis rate within 24 hours compared with the high expression group (P < 0.05). However, no significant differences were observed between the low and high level groups in DOK cells. Furthermore, it was determined that low LIMCH1 level correlated with poor prognosis in the patients (P=0.013) and a higher lymph node metastasis rate (P < 0.05). Investigations into the potential mechanisms of action indicated that LIMCH1 did not influence the onset or progression of oral squamous cell carcinoma via the epithelial-mesenchymal transition pathway. CONCLUSION LIMCH1 level may function as a promising biomarker to aid in the prognostic assessment of oral squamous cell carcinoma; however, its precise mechanistic role requires further investigation.
Humans ; Mouth Neoplasms/metabolism* ; Prognosis ; Carcinoma, Squamous Cell/metabolism* ; Biomarkers, Tumor/metabolism* ; LIM Domain Proteins/metabolism* ; Cell Line, Tumor ; Cell Proliferation ; Male ; Female

Protrusive facial deformities, characterized by the forward displacement of the teeth and/or jaws beyond the normal range, affect a considerable portion of the population. The manifestations and morphological mechanisms of protrusive facial deformities are complex and diverse, requiring orthodontists to possess a high level of theoretical knowledge and practical experience in the relevant orthodontic field. To further optimize the correction of protrusive facial deformities, this consensus proposes that the morphological mechanisms and diagnosis of protrusive facial deformities should be analyzed and judged from multiple dimensions and factors to accurately formulate treatment plans. It emphasizes the use of orthodontic strategies, including jaw growth modification, tooth extraction or non-extraction for anterior teeth retraction, and maxillofacial vertical control. These strategies aim to reduce anterior teeth and lip protrusion, increase chin prominence, harmonize nasolabial and chin-lip relationships, and improve the facial profile of patients with protrusive facial deformities. For severe skeletal protrusive facial deformities, orthodontic-orthognathic combined treatment may be suggested. This consensus summarizes the theoretical knowledge and clinical experience of numerous renowned oral experts nationwide, offering reference strategies for the correction of protrusive facial deformities.
Humans ; Orthodontics, Corrective/methods* ; Consensus ; Malocclusion/therapy* ; Patient Care Planning ; Cephalometry

Enamel demineralization, the formation of white spot lesions, is a common issue in clinical orthodontic treatment. The appearance of white spot lesions not only affects the texture and health of dental hard tissues but also impacts the health and aesthetics of teeth after orthodontic treatment. The prevention, diagnosis, and treatment of white spot lesions that occur throughout the orthodontic treatment process involve multiple dental specialties. This expert consensus will focus on providing guiding opinions on the management and prevention of white spot lesions during orthodontic treatment, advocating for proactive prevention, early detection, timely treatment, scientific follow-up, and multidisciplinary management of white spot lesions throughout the orthodontic process, thereby maintaining the dental health of patients during orthodontic treatment.
Humans ; Consensus ; Dental Caries/etiology* ; Dental Enamel/pathology* ; Tooth Demineralization/etiology* ; Tooth Remineralization