ObjectiveTo identify the pathogen species responsible for the wilt disease of Tetradium ruticarpum in Chongqing， investigate there biological characteristics， and screen effective fungicides， so as to provide a theoretical basis for disease control in production. MethodsThe pathogen was isolated via the tissue culture method. Pathogenicity was verified according to Koch's postulates. The pathogen was identified based on morphological characteristics and multi-gene phylogenetic analysis. The mycelial growth rate method was used for biological characterization of the pathogen and fungicide screening. ResultsThe pathogen colonies were nearly circular with irregular edges， white， short， velvety aerial hyphae， and pale purple undersides. Macroconidia were colorless， sickle-shaped， with 3-5 septa， while microconidia were transparent， elliptical， aseptate or with 1-2 septa. Multi-gene phylogenetic analysis showed that the pathogen clustered in the same clade as Fusarium fujikuroi with 100% support， which， combined with morphological characteristics， identified the pathogen causing wilt of T. ruticarpum in Chongqing as F. fujikuroi. The optimal conditions for the mycelial growth of F. fujikuroi were mung bean agar （MBA） with glucose as the carbon source， beef extract and yeast powder as nitrogen sources， 28 ℃， pH 7.0， and alternating light/dark conditions. The optimal conditions for sporulation were potato dextrose agar （PDA） with glucose as the carbon source， beef extract as the nitrogen source， 28 ℃， pH 7.0， and complete darkness. Among chemical fungicides， phenazine-1-carboxylic acid exhibited the strongest inhibitory effect on F. fujikuroi. Shenqinmycin and tetramycin were the most effective bio-fungicides. ConclusionThis study is the first to report F. fujikuroi as the causal agent of wilt disease in T. rutaecarpa. The chemical fungicide phenazine-1-carboxylic acid and the bio-fungicides shenqinmycin and tetramycin showed strong inhibitory effects against F. fujikuroi.

Cancer remains a leading cause of global mortality, necessitating the development of advanced therapeutic strategies with enhanced efficacy and reduced systemic toxicity. Among promising bioactive agents, lactoferrin (LF)—a multifunctional iron-binding glycoprotein abundantly found in mammalian milk and exocrine secretions—has garnered significant interest for its potent and multifaceted anti-cancer properties. This review provides a comprehensive analysis of the current understanding of LF’s role in oncology, encompassing its structural biology, diverse mechanisms of action, and groundbreaking advancements in its application through nano-engineering. LF exerts anti-tumor effects through multiple pathways, including extracellular action, intracellular action, and immune regulation. It demonstrates a remarkable affinity for cancer cell membranes, binding to overexpressed anionic components such as glycosaminoglycans and sialic acids, as well as to specific receptors including the low-density lipoprotein receptor-related protein-1 (LRP-1). This selective binding facilitates targeted uptake. Upon internalization, LF orchestrates a direct assault by inducing cell-cycle arrest in phases such as G0/G1 or S phase through the modulation of key regulators including cyclins, CDKs, and p53. Furthermore, it promotes programmed cell death via apoptotic pathways, involving caspase activation and downregulation of anti-apoptotic proteins such as survivin. A more recently elucidated mechanism is the induction of ferroptosis, an iron-dependent form of cell death characterized by overwhelming lipid peroxidation. Beyond direct cytotoxicity, LF acts as a potent immunomodulator. It enhances natural killer (NK) cell activity, modulates T-lymphocyte populations, and crucially reprograms tumor-associated macrophages (TAMs) from a pro-tumor M2 state to an anti-tumor M1 state, thereby reversing the immunosuppressive tumor microenvironment (TME). The translation of LF’s potential has been significantly accelerated by nanotechnology. The inherent biocompatibility and natural tumor-targeting capabilities of LF make it an ideal platform for sophisticated drug-delivery systems. This review details various fabrication strategies for LF-based nanoparticles (NPs), including self-assembly, sol-in-oil emulsion, and electrostatic nanocomplexes, among others. Research demonstrates that nano-formulations not only protect LF from degradation but also enhance its bioactivity and anti-cancer potency. More importantly, LF NPs serve as versatile carriers for a wide array of therapeutic agents, including conventional chemotherapeutics, natural compounds, and imaging agents. These engineered systems enable synergistic therapy and facilitate site-specific delivery. Notably, the ability of LF to bind to receptors on the blood-brain barrier (BBB) has been leveraged to develop nano-systems for glioblastoma treatment. Other innovative designs utilize LF to modulate the TME—for instance, by alleviating tumor hypoxia to sensitize cells to radiotherapy and chemotherapy. Despite compelling pre-clinical evidence, the clinical translation of LF and its nano-formulations remains nascent. While early-phase trials have established a favorable safety profile for recombinant human LF, larger Phase III studies have yielded mixed results, underscoring the complexity of its action in humans. Key challenges include enhancing drug targeting, optimizing loading efficiency, ensuring batch-to-batch reproducibility, and achieving deep tumor penetration. Future research must focus on the rational design of next-generation LF-NPs. This entails developing standardized manufacturing protocols, engineering “smart” stimuli-responsive systems for targeted drug release in the TME, and constructing multi-targeting platforms. A concerted interdisciplinary effort is paramount to bridge the gap between bench and bedside. In conclusion, LF, particularly in its nano-engineered forms, represents a highly promising and versatile agent in the oncological arsenal, holding immense potential for precise and effective cancer therapy.

Cancer remains a leading cause of global mortality, necessitating the development of advanced therapeutic strategies with enhanced efficacy and reduced systemic toxicity. Among promising bioactive agents, lactoferrin (LF)—a multifunctional iron-binding glycoprotein abundantly found in mammalian milk and exocrine secretions—has garnered significant interest for its potent and multifaceted anti-cancer properties. This review provides a comprehensive analysis of the current understanding of LF’s role in oncology, encompassing its structural biology, diverse mechanisms of action, and groundbreaking advancements in its application through nano-engineering. LF exerts anti-tumor effects through multiple pathways, including extracellular action, intracellular action, and immune regulation. It demonstrates a remarkable affinity for cancer cell membranes, binding to overexpressed anionic components such as glycosaminoglycans and sialic acids, as well as to specific receptors including the low-density lipoprotein receptor-related protein-1 (LRP-1). This selective binding facilitates targeted uptake. Upon internalization, LF orchestrates a direct assault by inducing cell-cycle arrest in phases such as G0/G1 or S phase through the modulation of key regulators including cyclins, CDKs, and p53. Furthermore, it promotes programmed cell death via apoptotic pathways, involving caspase activation and downregulation of anti-apoptotic proteins such as survivin. A more recently elucidated mechanism is the induction of ferroptosis, an iron-dependent form of cell death characterized by overwhelming lipid peroxidation. Beyond direct cytotoxicity, LF acts as a potent immunomodulator. It enhances natural killer (NK) cell activity, modulates T-lymphocyte populations, and crucially reprograms tumor-associated macrophages (TAMs) from a pro-tumor M2 state to an anti-tumor M1 state, thereby reversing the immunosuppressive tumor microenvironment (TME). The translation of LF’s potential has been significantly accelerated by nanotechnology. The inherent biocompatibility and natural tumor-targeting capabilities of LF make it an ideal platform for sophisticated drug-delivery systems. This review details various fabrication strategies for LF-based nanoparticles (NPs), including self-assembly, sol-in-oil emulsion, and electrostatic nanocomplexes, among others. Research demonstrates that nano-formulations not only protect LF from degradation but also enhance its bioactivity and anti-cancer potency. More importantly, LF NPs serve as versatile carriers for a wide array of therapeutic agents, including conventional chemotherapeutics, natural compounds, and imaging agents. These engineered systems enable synergistic therapy and facilitate site-specific delivery. Notably, the ability of LF to bind to receptors on the blood-brain barrier (BBB) has been leveraged to develop nano-systems for glioblastoma treatment. Other innovative designs utilize LF to modulate the TME—for instance, by alleviating tumor hypoxia to sensitize cells to radiotherapy and chemotherapy. Despite compelling pre-clinical evidence, the clinical translation of LF and its nano-formulations remains nascent. While early-phase trials have established a favorable safety profile for recombinant human LF, larger Phase III studies have yielded mixed results, underscoring the complexity of its action in humans. Key challenges include enhancing drug targeting, optimizing loading efficiency, ensuring batch-to-batch reproducibility, and achieving deep tumor penetration. Future research must focus on the rational design of next-generation LF-NPs. This entails developing standardized manufacturing protocols, engineering “smart” stimuli-responsive systems for targeted drug release in the TME, and constructing multi-targeting platforms. A concerted interdisciplinary effort is paramount to bridge the gap between bench and bedside. In conclusion, LF, particularly in its nano-engineered forms, represents a highly promising and versatile agent in the oncological arsenal, holding immense potential for precise and effective cancer therapy.

To investigate the effect of Xuebijing injection (XBJ) on cGAS/STING pathway in alleviating sepsis-induced acute lung injury (ALI), the mouse sepsis-induced ALI model was established by cecal ligation and puncture (CLP), and the cell inflammation model was constructed by LPS stimulating RAW264.7 cells. The effects of XBJ on lung tissue injury and cGAS/STING pathway-related protein expression in septic mice were investigated by HE staining, ELISA, and Western blot. The results showed that XBJ intervention could alleviate lung tissue injury, reduce serum IL-6, TNF-α, IFN-β, IL-1-β levels, and the expression of cGAS, STING, p-TBK1, and p-IRF3 proteins in lung tissue in vivo, and reduce the mRNA level of related inflammatory factors in RAW264.7 cells and the expression of cGAS/STING pathway proteins in vitro. The results showed that XBJ could play a role in the prevention and treatment of sepsis-induced ALI by inhibiting the inflammatory response via inhibition of the activation of cGAS/STING pathway. This study provides a new molecular mechanism for the clinical prevention and treatment of sepsis-induced acute lung injury with XBJ.

Objective: To analyze the nucleic acid load of human parvovirus B19 in major commercially available blood products in China, including human albumin, human intravenous immunoglobulin, human rabies immunoglobulin and various coagulation factor products, aiming to provide evidence for improving blood product manufacturing processes and quality control of source plasma. Methods: A total of 98 batches of coagulation factor products were tested for human parvovirus B19 nucleic acid using real-time fluorescent quantitative PCR, including 42 batches of human prothrombin complex, 35 batches of human coagulation factor Ⅷ, and 21 batches of human fibrinogen. Additionally, 6 batches of human albumin, 6 batches of human intravenous immunoglobulin, and 38 batches of human rabies immunoglobulin were tested for human parvovirus B19 nucleic acid. Results: Human parvovirus B19 nucleic acid were undetectable in human albumin, human intravenous immunoglobulin and human rabies immunoglobulin. Among the 98 batches of coagulation factor products tested for human parvovirus B19 nucleic acid, B19 nucleic acid reactivity rate was 69.0% (29/42) for human prothrombin complex batches, but nucleic acid concentration were all significantly lower than 10 IU/mL. The reactivity rate of B19 nucleic acid in 35 batches of human coagulation factor Ⅷ was 48.6% (17/35), with nucleic acid concentration all below 10 IU/mL. The reactivity rate of B19 nucleic acid in 21 batches of human fibrinogen was 61.9% (13/21), with nucleic acid concentration all below 10 IU/mL. Conclusion: No human parvovirus B19 has been detected in human albumin, human intravenous immunoglobulin, or human rabies immunoglobulin. Human parvovirus B19 nucleic acid may exist in commercially available coagulation factor products, highlighting the need for enhanced screening of human parvovirus B19 nucleic acid in these products. It is also recommended that B19 viral nucleic acid testing be conducted on source plasma, particularly for coagulation factor products.

Objective: To analyze the nucleic acid load of human parvovirus B19 in major commercially available blood products in China, including human albumin, human intravenous immunoglobulin, human rabies immunoglobulin and various coagulation factor products, aiming to provide evidence for improving blood product manufacturing processes and quality control of source plasma. Methods: A total of 98 batches of coagulation factor products were tested for human parvovirus B19 nucleic acid using real-time fluorescent quantitative PCR, including 42 batches of human prothrombin complex, 35 batches of human coagulation factor Ⅷ, and 21 batches of human fibrinogen. Additionally, 6 batches of human albumin, 6 batches of human intravenous immunoglobulin, and 38 batches of human rabies immunoglobulin were tested for human parvovirus B19 nucleic acid. Results: Human parvovirus B19 nucleic acid were undetectable in human albumin, human intravenous immunoglobulin and human rabies immunoglobulin. Among the 98 batches of coagulation factor products tested for human parvovirus B19 nucleic acid, B19 nucleic acid reactivity rate was 69.0% (29/42) for human prothrombin complex batches, but nucleic acid concentration were all significantly lower than 10 IU/mL. The reactivity rate of B19 nucleic acid in 35 batches of human coagulation factor Ⅷ was 48.6% (17/35), with nucleic acid concentration all below 10 IU/mL. The reactivity rate of B19 nucleic acid in 21 batches of human fibrinogen was 61.9% (13/21), with nucleic acid concentration all below 10 IU/mL. Conclusion: No human parvovirus B19 has been detected in human albumin, human intravenous immunoglobulin, or human rabies immunoglobulin. Human parvovirus B19 nucleic acid may exist in commercially available coagulation factor products, highlighting the need for enhanced screening of human parvovirus B19 nucleic acid in these products. It is also recommended that B19 viral nucleic acid testing be conducted on source plasma, particularly for coagulation factor products.

Background The Inner Mongolia Autonomous Region is a vast area with a wide array of ecological environments, resulting in considerable regional variations in air pollution characteristics. Current research is limited by a scarcity of systematic, region-wide studies and risk assessments. Objective To assess the health risks associated with inhalation exposure to nine heavy metal and metalloid elements in atmospheric fine particulate matter (PM_2.5) for the population of the Inner Mongolia Autonomous Region. Methods From the 10th to the 16th of each month throughout 2023, atmospheric PM_2.5 samples were collected at designated monitoring sites in 12 leagues (cities) across the Inner Mongolia Autonomous Region to analyze the characteristics and trends in concentration. The health risk assessment model developed by the United States Environmental Protection Agency was employed to evaluate both the non-carcinogenic and carcinogenic risks associated with the heavy metal elements beryllium (Be), cadmium (Cd), chromium (Cr), hydrargyrum (Hg), plumbum (Pb), manganese (Mn), and nickel (Ni) and the metalloid elements stibium (Sb) and arsenic (As). Results In 2023, a total of 1206 valid PM_2.5 samples were analyzed from the Inner Mongolia Autonomous Region. The annual average PM_2.5 concentrations in Inner Mongolia, as well as in the cities of Ordos, Wuhai, and the Alxa League, all exceeded the national limit of 35 μg·m⁻³. The PM_2.5 concentrations across the leagues (cities) exhibited a clear seasonal variation, peaking in winter, followed by spring, and reaching a minimum in summer and autumn. The median PM_2.5 concentration in Ordos throughout the year was higher than that in the other leagues (cities) of the region. Concerning health risks, the non-carcinogenic risks associated with the 9 elements detected in each league (city) were all below 1, indicating acceptable levels. However, the non-carcinogenic risk values for Mn, Cr, and As were relatively high; specifically, Ordos City displayed the highest non-carcinogenic risk values for Mn (7.74×10⁻¹) and Cr (2.97×10⁻²), while Chifeng City recorded the highest value for As (2.34×10⁻³). The carcinogenic risk values for As, Cd, Cr, and Ni fell within the range of 1×10⁻⁹ to 1×10⁻⁵, representing an acceptable level. The health risks varied with age, and the elderly residents faced the highest non-carcinogenic and carcinogenic health risks. Conclusion While the carcinogenic and non-carcinogenic risks from heavy metals and metalloids within atmospheric PM_2.5 in the Inner Mongolia Autonomous Region are generally within acceptable limits, the potential risks that Mn, As, and Cr pose to the health of elderly people warrants particular attention, and Ordos and Chifeng cities exhibit notably higher health risks among other areas. It is recommended that regular, long-term monitoring be conducted, taking into account the specific conditions at monitoring sites across each league (city), and that targeted air quality management strategies be implemented to protect public health.

The sterile electrode acupuncture needle for single use is an innovative product that combines traditional acupuncture with modern electronic technology, and it has obtained Class Ⅱ medical device registration certificate. This acupuncture device consists of a needle body and a handle. The diameter of the needle body ranges from 0.16 mm to 0.55 mm, and the length from 7 mm to 150 mm. The spiral spray technology is adopted to modify the micron-level insulating coat on stainless steel needle body. The needle holder is connected to the electroacupuncture device (conductive), the micro-film insulated needle body (non-conductive) and the membrane-free needle tip (conductive) can provide a precise electrical stimulation for different tissue layers of acupoints (such as deep nerves and fascia). The intradermal stimulation test, cytotoxicity test and hypersensitivity reaction test have showed a favorable biocompatibility, laying a solid and reliable safety for clinical application. This acupuncture device is suitable for the in-depth invasive stimulation at the sites of human body surface in combination with electroacupuncture equipment in medical institutions.
Humans ; Needles ; Acupuncture Therapy/instrumentation* ; Electrodes ; Equipment Design ; Electroacupuncture/instrumentation* ; Acupuncture Points ; Animals

Oropharyngeal squamous cell carcinoma(OPSCC)is a malignant tumor originating from the squamous epithelium of the oro-pharyngeal mucosa,accounting for more than 90％of oropharyngeal malignancies.In recent years,human papillomavirus(HPV)infec-tion has become one of the primary etiological factors of oropharyngeal squamous carcinoma.The incidence of HPV-associated oropharyn-geal squamous carcinoma has been rising annually,with a noticeable trend toward younger populations,posing a significant threat to hu-man health.Due to the distinct biological behavior and clinical characteristics of HPV-associated oropharyngeal squamous carcinoma com-pared to its non-HPV-related counterpart,the diagnostic and treatment strategies for oropharyngeal squamous carcinoma have undergone substantial changes.Prevention and screening for oropharyngeal squamous carcinoma are of critical importance.The diagnostic and treat-ment process involves multi-disciplinary collaboration,including oral and maxillofacial surgery,otolaryngology,head and neck surgery,oncology,radiology and pathology.Based on evidence from clinical practice,a comprehensive,integrated diagnostic and therapeutic ap-proach has been established,centered around the concept of"prevention,screening,diagnosis,treatment,and rehabilitation",covering the entire patient lifecycle and providing a valuable reference for clinical practice.

Objective To comprehensively evaluate the quality difference of Huaihua powder obtained by the hospital's electromagnetic furnace decoction method and automatic decoction machine decoction method.Methods Five methods(induction cooker decoction(once decoction,twice decoction),normal pressure decoction(once decoction,twice decoction),and pressure decoction)were used to prepare the decoction.The HPLC method used a Shiseido CAPCELL PAK-C18(250 mm×4.6 mm,5 μm)column,with a UV detection wavelength of 254 nm,mobile phase of acetonitrile 0.1%phosphoric acid water,column temperature of 30℃,flow rate of 1.0 mL/min,and detection of index components including rutin,naringin,quercitrin,neohesperidin,quercetin,and menthone.The extraction rate of the index components was calculated and the cream yield of each decoction was detected.The evaluation of quality differences is based on the comprehensive score of cream yield(40%)and indicator components(60%).Results The HPLC fingerprint similarity of Huaihua powder prepared by 5 decoction methods was greater than 99%.There was no significant difference(P>0.05)in the yield of ointment and the content of indicator components between the induction cooker one decoction and the induction cooker twice decoction methods.The yield of ointment and the extraction rate of indicator components were significantly higher in twice normal pressure decoction using a decoction machine than once normal pressure decoction using a decoction machine(P<0.05).The index component score of machine under pressure decoction once was the highest,but the comprehensive score of twice normal pressure decoction was the highest,with a combined score of 92.13 and 89.58,respectively,far higher than the 36.01,18.79,and 15.60 of the other three decoction methods.Classify the decoction into three categories through cluster analysis.Orthogonal partial least squares-discriminant analysis was used to screen for rutin,naringin and neohesperidin as differential biomarkers.Conclusion The quality of Huaihua powder decocted by a decoction machine is significantly better than that by an induction cooker,and the twice decocted at normal pressure by the decoction machine are significantly better than those decocted at normal pressure once.Decoction under pressure once may be a better choice.