Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Aromatic inhalation therapy is a key traditional Chinese medicine （TCM） approach for preventing respiratory infectious diseases. Its foundational theory， "aromatics acting on the spleen"， is deeply rooted in TCM principles and supported by modern medical research. The theory posits that the aromatic properties of medicinals primarily act on the spleen， and the aromatic inhalation therapy achieved its protective effects by modulation of the spleen and spleen channel to enhance the regulation of wei qi， striae and interstices. In TCM， the spleen is considered the mother of the lungs， with the function of nurturing lung； it is also seen as the source of wei qi， responsible for external defense； and the root of healthy qi， forming the foundation of acquired （postnatal） constitution. Thus， preventive strategies for respiratory infectious diseases focus on strengthening the spleen. From a modern medical perspective， the spleen's role in regulating lung immune responses， the shared immune functions of the respiratory and gastrointestinal mucosa， and the spleen's overall immune modulation provide scientific evidence for using aromatic inhalation therapy to prevent respiratory infections. Additionally， aromatic inhalation therapy offers several advantages， including direct action， rapid onset， minimal side effects， controllable risks， convenience， and ease of dissemination， making it a practical and effective preventive measure for respiratory infectious diseases.

The medicinal use of Malvae Semen has a long history. In this paper， by consulting the ancient materia medica， prescription， agronomy， literature and other aspects of the classics， the name， origin， evolution of scientific name， quality， harvesting and processing， functions and indications and others of Malvae Semen were systematically sorted out and verified， so as to provide a basis for the development and utilization of famous classical formulas containing this herb. According to the textual research， Shennong Bencaojing began to use Dongkuizi as the correct name， which was used in the past dynasties， and there were also aliases such as Kuicaizi， Huacai， and Kuizi. Through the original research， it can be seen that Kuicai is the mainstream original plant of Malvae Semen， that is， Malva verticillata var. crispa， the Alcea rosea and M. cathayensis are also used. In modern times， the seeds of Abutilon theophrasti have been passed off as Malvae Semen， while the seeds of M. verticillata var. crispa have rarely been used in medicine. And Abutili Semen has been another medicinal material with different efficacy since the collection of Newly Revised Materia Medica in the Tang dynasty. Since the Ming and Qing dynasties， the cultivation of Kuicai has been decreasing， while A. theophrasti is more common and easy to obtain， and Abutili Semen and Malvae Semen are similar in morphology and confused， which should be corrected. In addition， Malvae Fructus is a Mongolian customary medicinal herb， which is different from the traditional use of seeds in traditional Chinese medicine. Kuicai， as an important vegetable in history， was widely cultivated and gradually shrunk after the Song dynasty， it is now mainly produced in southern provinces. The quality evaluation of Malvae Semen is better for those with dry bodies， full grain， grayish brown color， no mud， and no impurities. The harvesting is generally in the autumn and winter. After drying， it is seeded， sieved peel and impurities， mashed， or slightly stir-fried to yellow-white color with gentle fire. It is sweet， cold and slippery in nature and taste， with the main effects of laxation， diuresis， lactation and elimination of swelling. The efficacy of Abutili Semen is clearing heat and removing toxicity， promoting diuresis and removing nebula， the efficacy is quite different from that of Malvae Semen. Based on the results of textual research， it is suggested that M. verticillata var. crispa should be used as the medicinal source of Malvae Semen in the development of famous classical formulas， the corresponding processing methods should be selected according to the requirements of drug processing in the formulas， while the raw products are recommended to be used if the processing is not specified.

The medicinal use of Malvae Semen has a long history. In this paper， by consulting the ancient materia medica， prescription， agronomy， literature and other aspects of the classics， the name， origin， evolution of scientific name， quality， harvesting and processing， functions and indications and others of Malvae Semen were systematically sorted out and verified， so as to provide a basis for the development and utilization of famous classical formulas containing this herb. According to the textual research， Shennong Bencaojing began to use Dongkuizi as the correct name， which was used in the past dynasties， and there were also aliases such as Kuicaizi， Huacai， and Kuizi. Through the original research， it can be seen that Kuicai is the mainstream original plant of Malvae Semen， that is， Malva verticillata var. crispa， the Alcea rosea and M. cathayensis are also used. In modern times， the seeds of Abutilon theophrasti have been passed off as Malvae Semen， while the seeds of M. verticillata var. crispa have rarely been used in medicine. And Abutili Semen has been another medicinal material with different efficacy since the collection of Newly Revised Materia Medica in the Tang dynasty. Since the Ming and Qing dynasties， the cultivation of Kuicai has been decreasing， while A. theophrasti is more common and easy to obtain， and Abutili Semen and Malvae Semen are similar in morphology and confused， which should be corrected. In addition， Malvae Fructus is a Mongolian customary medicinal herb， which is different from the traditional use of seeds in traditional Chinese medicine. Kuicai， as an important vegetable in history， was widely cultivated and gradually shrunk after the Song dynasty， it is now mainly produced in southern provinces. The quality evaluation of Malvae Semen is better for those with dry bodies， full grain， grayish brown color， no mud， and no impurities. The harvesting is generally in the autumn and winter. After drying， it is seeded， sieved peel and impurities， mashed， or slightly stir-fried to yellow-white color with gentle fire. It is sweet， cold and slippery in nature and taste， with the main effects of laxation， diuresis， lactation and elimination of swelling. The efficacy of Abutili Semen is clearing heat and removing toxicity， promoting diuresis and removing nebula， the efficacy is quite different from that of Malvae Semen. Based on the results of textual research， it is suggested that M. verticillata var. crispa should be used as the medicinal source of Malvae Semen in the development of famous classical formulas， the corresponding processing methods should be selected according to the requirements of drug processing in the formulas， while the raw products are recommended to be used if the processing is not specified.

ObjectiveIn order to provide a reference for the optimization of preparation process of stir-fried Glycyrrhizae Radix et Rhizoma（sf-GRR）， the quality changes during the processing was studied. MethodsGlycyrrhizae Radix et Rhizoma was processed by stir-frying for 17 min， and samples were collected every 1 min during the processing. The appearance color of the samples was determined by visual analysis technology， the moisture and extract of the process samples were detected by the drying method and the hot extraction method of alcohol-soluble extract in the general rules of the 2020 edition of Chinese Pharmacopoeia（part Ⅳ）， and the contents of liquiritin apioside， liquiritin， isoliquiritin apioside， isoliquiritin， licoricesaponin G₂ and glycyrrhizic acid in the process samples were determined by high performance liquid chromatography（HPLC）. Then principal component analysis（PCA）， partial least squares-discriminant analysis（PLS-DA） and Spearman correlation analysis were used for clustering， discrimination and correlation analysis of the appearance color， moisture， extract and the contents of six internal components. Based on artificial neural network and random forest algorithm， the prediction model of processing degree of sf-GRR was established. On this basis， based on the five principles of quality marker（Q-Maker）， explore the monitoring Q-Maker of sf-GRR. ResultsThe color of Glycyrrhizae Radix et Rhizoma deepened after stir-frying， and the appearance color of the sample changed from light yellow to dark yellow during processing. During the stir-frying process， the moisture content showed a decreasing trend with the extension of processing time， while the extract content showed an increasing trend with the extension of processing time. After stir-frying， the contents of liquiritin apioside， liquiritin and licoricesaponin G₂ showed an overall decreasing trend， while the contents of isoliquiritin apioside and isoliquiritin increased， and the content of glycyrrhizic acid increased slightly. The correlation analysis showed that moisture was positively correlated with brightness（L^*） and red/green value（a^*）， and negatively correlated with yellow/blue value（b^*） and total color difference（E^*ab）. Isoliquiritin apioside and isoliquiritin had negative correlation with L^* and a^*， and positive correlation with b^* and E^*ab. The processing process of sf-GRR could be divided into two stages of the early stage（0-14 min） and the late stage（15-17 min）， and could be divided into three stages of the early stage（0-6 min）， the middle stage（7-14 min） and the late stage（15-17 min） by combining the moisture， extract， the contents of 6 components and color values. Based on artificial neural network analysis and random forest algorithm， isoliquiritin apioside， isoliquiritin， liquiritin and glycyrrhizic acid were selected as monitoring markers for sf-GRR. ConclusionBased on the analysis of the exterior-interior indicators of process samples of sf-GRR， this paper ultimately identifies four processing monitoring markers， which can provide a basis for optimizing the processing technology of sf-GRR.