To analyze the disease burden of acute lymphoid leukemia(ALL) and its changing trends in China and globally from 1990 to 2021, aiming to provide a theoretical basis for disease prevention, treatment, and policy formulation.

Extensive studies have identified potential adverse effects on semen quality of obesity, based on body mass index, but the association between body fat distribution, a more relevant indicator for obesity, and semen quality remains less clear. We conducted a longitudinal study of 4304 sperm donors from the Guangdong Provincial Human Sperm Bank (Guangzhou, China) during 2017-2021. A body composition analyzer was used to measure total and local body fat percentage for each participant. Generalized estimating equations were employed to assess the association between body fat percentage and sperm count, motility, and morphology. We estimated that each 10% increase in total body fat percentage (estimated change [95% confidence interval, 95% CI]) was significantly associated with a 0.18 × 10 6 (0.09 × 10 6 -0.27 × 10 6 ) ml and 12.21 × 10 6 (4.52 × 10 6 -19.91 × 10 6 ) reduction in semen volume and total sperm count, respectively. Categorical analyses and exposure-response curves showed that the association of body fat distribution with semen volume and total sperm count was stronger at higher body fat percentages. In addition, the association still held among normal weight and overweight participants. We observed similar associations for upper limb, trunk, and lower limb body fact distributions. In conclusion, we found that a higher body fat distribution was significantly associated with lower semen quality (especially semen volume) even in men with a normal weight. These findings provide useful clues in exploring body fat as a risk factor for semen quality decline and add to evidence for improving semen quality for those who are expected to conceive.
Humans ; Male ; Adult ; Semen Analysis ; China ; Body Fat Distribution ; Longitudinal Studies ; Sperm Count ; Sperm Motility ; Body Mass Index ; Tissue Donors ; Obesity/complications* ; Spermatozoa ; Young Adult ; Middle Aged ; East Asian People

To analyze the disease burden and trends of motor neuron disease(MND) in China and globally from 1990 to 2021, providing evidence for the formulation of relevant health strategies inChina.

Twelve pre-processing protocols for formalin-fixed paraffin-embedded(FFPE)tissue samples were developed by orthogonal experimental design,incorporating different dewaxing buffers(Triton X-100 and xylene),lysis buffers(TFE and RapiGest),and enzyme digestion methods(iST,SP3,and FASP)to explore the optimal experimental conditions.These protocols were assessed based on protein and peptide identification depth,identification stability,and quantitative levels of protein abundance.The results indicated that Triton X-100 and xylene minimally impacted proteomics identification,whereas the TFE lysis buffer and iST digestion method significantly enhanced the proteomics analysis of FFPE samples.Considering the potential toxicity of xylene,the TTI protocol based on Triton X-100,TFE,and iST was determined to be the optimal choice.This protocol exhibited the best repeatability and stability,and a higher number of proteins associated with significant biological functions were identified.In conclusion,the established TTI protocol offered an efficient and comprehensive approach for proteomic analysis of FFPE samples,significantly enhancing the repeatability and stability of protein identification.

Objective To construct a logistic regression prediction model for stress ulcer(SU)after cerebral hemorrhage.Methods A total of 230 patients with cerebral hemorrhage admitted to our hospital from January 2020 to January 2023 were prospectively selected as the study subjects.They were randomly di-vided into a training group and a validation group using a random number table method,with 115 patients in each group.The incidence of postoperative SU was statistically compared between the two groups.The least absolute shrinkage and selection operator(Lasso)and logistic regression were used to analyze the influencing factors of SU after cerebral hemorrhage,and a logistic regression prediction model was established and valida-ted.Results The incidence of SU was 19.13%in the training group and 20.00%in the validation group.In-crement of age,blood loss≥30 mL,higher levels of neutrophil-to-lymphocyte ratio(NLR),heat shock protein 70(HSP70)and HSP90 were identified as independent risk factors for SU after cerebral hemorrhage(P<0.05),while lower levels of Glasgow Coma Scale(GCS)score and albumin(Alb)were protective factors(P<0.05).The prediction model was logit(P)=0.409×age+1.288×blood loss-1.335×GCS score-1.126×Alb+0.452×NLR+1.483×HSP70+1.593×HSP90-10.325.The areas under the receiver operat-ing characteristic(ROC)curve(AUC)for the training group and the validation group were 0.845(95%CI:0.765-0.906)and 0.855(95%CI:0.777-0.913),respectively.The sensitivities were 81.82%and 90.91%,and the specificities were 76.34%and 70.97%,respectively.Conclusion A logistic regression prediction model was successfully constructed,which has certain predictive value for SU after cerebral hemorrhage.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective With the widespread of transcatheter aortic valve replacement(TAVR)in patients with severe symptomatic aortic stenosis(AS),the life-cycle management has become a major determinant of prognosis.Methods A total of 408 AS patients who underwent successfully TAVR from June 2021 to August 2023 were consecutively enrolled in Hospital Valve Intervention Center.Patients were assigned to the Usual Care(UC)group between June 2021 and October 2022,while patients were assigned to the Heart Multi-parameter Monitoring(HMM)group between November 2022 and August 2023.The primary endpoint was defined as composite endpoint within 6 months post-TAVR,including all-cause death,cardiovascular death,stroke/transient ischemic attack,conduction block,myocardial infarction,heart failure rehospitalization,and major bleeding events.Secondary endpoints were the time interval(in hours)from event occurrence to medical consultation or advice and patient satisfaction.Statistical analysis was performed using Kaplan-Meier and multivariable Cox proportional hazards models.Results The incidence of primary endpoint in HMM group was significantly lower than that in UC group(8.9％vs.17.7％,P=0.016),the driving event was the rate of diagnosis and recognition of conduction block.The average time intervals from event occurrence to receiving medical advice were 3.02 h in HHM group vs.97.09 h in UC group(P＜0.001).Using cardiac monitoring devices and smart healthcare platforms provided significant improving in patients long-term management(HR 0.439,95％CI 0.244-0.790,P=0.006).Conclusions The utilization of cardiac monitoring devices and smart healthcare platforms effectively alerted clinical events and improved postoperative quality of life during long-term management post TAVR.

Due to the high similarity with the lipid layer between human skin keratinocytes, functional cosmetics with layered liquid crystal structure prepared by liquid crystal emulsification technology encapsulating natural active substances have become a hot research topic in recent years. This type of functional cosmetic often has a fresh and natural skin feel, excellent skin barrier repair function and efficient moisturizing effect, etc., showing great potential in cosmetic application. However, the present research on the application of liquid crystal emulsification technology to functional cosmetics is still in the initial stage, and there are fewer relevant reports with reference values. Based on the mentioned above, this review provides a comprehensive summary of functional cosmetics with layered liquid crystal structures prepared by liquid crystal emulsification technology from the following aspects: the structure of human skin, the composition of lamellar liquid crystal, the advantages of liquid crystal emulsification technology containing natural active substances used in the field of functional cosmetics, the preparation process, main components, influencing factors during the preparation and the market functional cosmetics with lamellar liquid crystal structure. Finally, the prospect of the application of liquid crystal emulsification technology in functional cosmetics is presented, to provide useful references for those engaged in the research of liquid crystal emulsification technology-related functional cosmetics.