Depression is a common mental disorder that falls under the category of "stagnation syndrome" in traditional Chinese medicine （TCM）. Its complex pathogenesis poses challenges for the development of novel therapeutic agents. Currently， clinically used antidepressants are often accompanied by significant side effects， and statistics show that about one-third of patients do not respond to these medications. TCM demonstrates advantages in the treatment of depression through multi-target， multi-pathway and multi-mechanistic approaches. Pinelliae Rhizoma， a phlegm-resolving herb， exhibits effects such as drying dampness and resolving phlegm， as well as eliminating stuffiness and reducing masses. The characteristics of harmonizing Yin and Yang and resolving stagnation in the middle energizer align precisely with the pathogenesis of depression syndrome， demonstrating therapeutic efficacy in affected patients. Literature studies have found that the active ingredients of Pinelliae Rhizoma， such as cavidine， baicalein， β-sitosterol， as well as Pinelliae Rhizoma herb pairs， such as Pinelliae Rhizoma-Magnoliae Officinalis Cortex， Pinelliae Rhizoma-husked sorghum， Pinelliae Rhizoma-Prunellae Spica， exhibit significant antidepressant effects. Furthermore， TCM formulas containing Pinelliae Rhizoma as the principal therapeutic agent， such as Banxia Xiexin Tang， Banxia Houpo Tang， and Wendan Tang， as well as formulas incorporating Pinelliae Rhizoma like compound Xiaochaihu Tang， Chaihu Jia Longgu Muli Tang， and Erchen Tang， have also demonstrated favorable antidepressant efficacy. The antidepressant mechanism of these agents may involve modulation of 5-hydroxytryptamine （5-HT） and dopamine （DA） levels， up-regulation of brain-derived neurotrophic factor （BDNF） expression， regulation of the hypothalamus-pituitary-adrenal （HPA） axis， reduction of oxidative stress， modulation of nuclear transcription factor-κB （NF-κB） signaling pathway， and inhibition of microglia-mediated inflammatory responses. This review summarized the antidepressant mechanisms and clinical applications of the active components， herb pairs， and TCM formulas containing Pinelliae Rhizoma， aiming to provide a reference for modern research on the use of Pinelliae Rhizoma in antidepressant therapy.

Depression is a high-incidence mental disorder with complex causes and multifaceted pathogenic mechanisms. Its pathogenesis has not yet been fully elucidated， which has hindered the development of novel and highly effective antidepressant drugs. This condition severely affects human physical and mental health while imposing a significant socio-economic burden. At present， several hypotheses exist regarding the pathogenesis of depression， including monoamine neurotransmitter imbalances， neurotrophic factor deficiencies， neural plasticity impairments， glutamate dysregulation， neuroinflammatory disorders， gut microbiota imbalances， and mitochondrial autophagy dysfunction. Currently， most clinical antidepressants are monoamine neurotransmitter reuptake inhibitors. Although they exhibit certain therapeutic effects， they are associated with significant drawbacks， such as severe adverse reactions and poor patient compliance. In contrast， traditional Chinese medicine （TCM）， characterized by its multi-targeted effects， mild efficacy， and minimal side effects， has demonstrated significant advantages in the treatment of depression. Chinese medicine Polygalae Radix possesses the functions of calming the mind， enhancing cognitive functions， harmonizing the heart and kidneys， and dispelling phlegm to open orifices. It is often included in compound prescriptions for the clinical treatment of depression. Based on current hypotheses regarding the pathogenesis of depression， this paper systematically reviews research progress on the antidepressant mechanisms of Polygalae Radix from multiple perspectives， including its active components， its use in herbal pairings， and its inclusion in TCM compound prescriptions. This review aims to provide a scientific basis for the clinical application of Polygalae Radix in antidepressant therapy and to serve as a reference for the modernization of its antidepressant research.

Objective:To explore the operational accuracy and operative time of oral surgery robot-assisted endodontic microsurgery on a head-simulator for clinical reference.Methods:Three pairs of surgical simulation models were set up on head-simulator. Each model included 10 positions anteriorly and posteriorly, 20 teeth for each technique, for a total of 60 teeth. An attending physician with more than 3 years clinical experience in endodontic microsurgery completed fixed-point osteotomy and apicoectomy in three groups of endodontic microsurgery under freehand (FH), static navigation (SN), and surgery robot (SR). The duration of each operation was recorded. Cone-beam CT was taken before the operation and the surgical path was planned in the software; after surgery, a plug gauge (precision gauge for measuring hole dimensions) was inserted into the surgical path for intraoral scanning. Surgical accuracy (starting point, end point, and angular deviation) was assessed in all 3 groups, and surgery time was compared.Results:The deviation at the starting point and the end point, and angular deviation was (0.37±0.11), (0.37±0.10) mm, and 0.71°±0.17°in the SR group. The deviations in the SR group were significantly lower than those in the SN group [(0.59±0.14), (0.65±0.18) mm, and 2.64°±0.75°] ( P<0.05), and both groups were significantly lower than the FH group [(1.37±0.31), (1.10±0.21) mm, and 9.84°±3.15°] ( P<0.05). The operative time in the SN group [(1.20±0.03) min] was significantly less than that in the SR group [(2.18±0.03) min] ( P<0.05), and both groups were significantly less than that in the FH group [(8.70±3.15) min] ( P<0.05). Starting point deviation, end point deviation, and angular deviation [(1.09±0.10), (0.90±0.07) mm, 7.22°±1.13°] in anterior teeth using the FH was significantly lower than the starting deviation, endpoint deviation, and angular deviation [(1.65±0.14), (1.30±0.06) mm, 12.46°±2.10°] in the posterior teeth using FH ( P<0.05), and the operative time in the anterior teeth using the FH [(5.75±0.57) min] was significantly less than that in the posterior teeth using [(11.65±1.14) min] ( P<0.05). The difference in accuracy and operative time between using SN and SR on anterior and posterior teeth was not statistically significant ( P>0.05). Conclusions:Oral surgery robot-assisted endodontic microsurgery helps improving the accuracy of clinicians′ operations and shorten the operation time.

Stomatognathic system rehabilitation (SSR) is an important component of dental implant therapy, involving multiple disciplines and factors. This article focuses on the importance of clinical issues, such as mandibular position, vertical distance, occlusion and temporomandibular joint in SSR, in order to provide reference for dentists in clinical diagnosis and treatment.

Alveolar bone is an important anatomic basis for implant-supported denture restoration, and its different degrees of defects determine the choices of bone augmentation surgeries. Therefore, the reconstruction of alveolar bone defects is an important technology in the clinical practice of implant restoration. However, the final reconstructive effect of bone quality, bone quantity and bone morphology is affected by many factors. Clinicians need to master the standardized diagnosis and treatment principles and methods to improve the treatment effect and achieve the goal of both aesthetic and functional reconstruction of both jaws. Based on the current clinical experience of domestic experts and the relevant academic guidelines of foreign counterparts, this expert consensus systematically and comprehensively summarized the augmentation strategies of alveolar bone defects from two aspects: the classification of alveolar bone defects and the appropriate selection of bone augmentation surgeries. The following consensus are reached: alveolar bone defects can be divided into five types (Ⅰ-0, Ⅰ-Ⅰ, Ⅱ-0, Ⅱ-Ⅰ and Ⅱ-Ⅱ) according to the relationship between alveolar bone defects and the expected position of dental implants. A typeⅠ-0 bone defect is a bone defect on one side of the alveolar bone that does not exceed 50% of the expected implant length, and there is no obvious defect on the other side; guided bone regeneration with simultaneous implant implantation is preferred. Type Ⅰ-Ⅰ bone defects refer to bone defects on both sides of alveolar bone those do not exceed 50% of the expected implant length; the first choice is autologous bone block onlay grafting for bone increments with staged implant placement or transcrestal sinus floor elevation with simultaneous implant implantation. Type Ⅱ-0 bone defects show that the bone defect on one side of alveolar bone exceeds 50% of the expected implant length, and there’s no obvious defect on the other side; autologous bone block onlay grafting (thickness ≤ 4 mm) or alveolar ridge splitting (thickness > 4 mm) is preferred for bone augmentation with staged implant placement. Type Ⅱ-Ⅰ bone defects indicate that the bone plate defect on one side exceeds 50% of the expected implant length and the bone defect on the other side does not exceed 50% of the expected implant length; autologous bone block onlay grafting or tenting techniques is preferred for bone increments with staged implant implantation. Type Ⅱ-Ⅱ bone defects are bone plates on both sides of alveolar bone those exceed 50% of the expected implant length; guided bone regeneration with rigid mesh or maxillary sinus floor elevation or cortical autologous bone tenting is preferred for bone increments with staged implant implantation. This consensus will provide clinical physicians with appropriate augmentation strategies for alveolar bone defects.

Objective:To comparatively evaluate the scan time and the accuracy of maxillary full-arch scans using four intraoral scanners (IOS) on conditions of the intraoral head-simulator and the hand-held model, and to evaluate the influence of different scanning conditions on digital scan.Methods:A upper dental arch model with melamine-formaldehyde resin teeth and silica gel gingiva that could be fixed on a head simulator was scanned with an optical scanner (ATOS Core) in order to obtain the standard tessellation language dataset as reference. Intraoral scans were performed on the model fixed on the head simulator by three researchers with four IOS [A: TRIOS 3; B: CS 3600; C: CEREC Omnicam; D: iTero]. For each scanner and each researcher, six scans were performed, to obtain the datasets as the head simulator group. And another six scans with each of the four intraoral scanners were performed by each researcher on the hand-held model to obtain the STL datasets as the hand-held group. The scan time were recorded for each scan. In the Geomagic Wrap software, the digital models were trimmed with only the teeth information retained and supreimposed by best fit alignment function and compared to obtain the root mean square (RMS) values of the discrepancies by three-dimensional compare function. The test datasets of each group were compared with the reference dataset for trueness. The six test scanning datasets with the same scanner of the same researcher were cross compared for precision. Mann Whitney U test was used to statistically analyze the difference values of the scan time, trueness and precision of the same intraoral scanner between head simulator group and hand-held group. Results:Compared to the hand-held group, the scan time of A [142(82) s] and D [119(52) s], which two IOS both with handle, were longer in head simulator group [A: 98(28) s; D: 85(22) s] ( P<0.01). However there were no significant differences between the two groups for scan time of IOS B and C ( P>0.05). For full-arch scan accuracy (trueness and precision), there were no significant differences between the two groups of IOS A and B ( P>0.05), while the trueness of C ( P<0.05) and the precision of D ( P<0.01) were better in head simulator group [C: 112(38) μm; D: 43(13) μm] compared to hand-held group [C: 135(47) μm; D: 53(18) μm]. However, there were no significant differences for the precision of C ( P>0.05) and the trueness of D ( P>0.05). Conclusions:The scan time and the accuracy of full-arch digital scans with different IOS may be effected by the scan conditions. For in vitro study of intraoral scanning, head-simulator can simulate the intraoral environment of the real patient to some extent. Meanwhile, the position of the dentist and the patient, and also the limited intraoral space during intraoral scanning are also simulated.

Objective:To comparatively evaluate the accuracy and the scan time of three full-arch scan strategies on the head-simulator, to explore a full-arch scan strategy with better clinical operability and high accuracy.Methods:A cross-controlled study design was used. A model with melamine-formaldehyde resin teeth and silica gel gingiva of an upper dental arch which can be fixed on a head simulator was scanned with an optical scanner (ATOS Core) in order to obtain the standard tessellation language (STL) dataset as reference. Intraoral scans were performed on the model fixed on the head simulator with four intraoral scanners (IOS) [A (TRIOS 3), B (CS 3600), C (CEREC Omnicam), D (iTero)]. The STL datasets were obtained from each of the four different IOS systems by using three scan strategies (scan strategies 1, 2 and 3 were composed of 10, 5 and 7 paths respectively) all by one attending doctor with 3 years of intraoral scanning experience. For each scanner and each scan strategy, nine scans were acquired. And the scan time was recorded for each scan. Following the scan strategy, the scan path was completed to obtain a full-arch digital model, and the scan time was recorded as full-arch scan time. Complementary scans were performed to fill the missing image, and this scan time was recorded as complementary scan time. The total scan time was obtained by adding full-arch scan time and complementary scan time. Through the Geomagic Wrap software, the three-dimensional (3D) models were overlaid by best fit alignment function and compared to obtain the root mean square values of the discrepancies by 3D compare function. The intraoral scanning datasets were compared with the reference for trueness. The nine intraoral scanning datasets were cross compared with same scan strategy and same intraoral scanner for precision.Results:There were no significant differences among the three scan strategies for trueness ( P>0.05), while the differences among the three scan strategies for precision were affected by difference IOSs ( P<0.05), and only scan strategy 3 showed the highest precision with all the four IOS. The full-arch scan time of scan strategies 1, 2 and 3 were (130±24), (72±17) and (90±19) s respectively ( P<0.05). For complementary scan time, scan strategy 2 [(50±24) s] took longer time than scan strategy 1 [(26±18) s] and scan strategy [(25±21) s] ( P<0.05), while no significant differences between the latter two ( P>0.05). For total scan time, scan strategy 1 [(156±31) s] took longer time than scan strategy 2 [(122±30) s ] and scan strategy 3 [(115±29) s ] ( P<0.05), while no significant differences between the latter two ( P>0.05). Conclusions:Full-arch scanning on the head-simulator with scan strategy 3 which can obtain scanning datasets with high accuracy, was more convenient to operate and took shorter scan time, and is generally suitable for intraoral scanners commonly used in clinic.

Objective:To observe the status of the sinus membrane using fiber optic endoscope during the lateral window approach sinus floor elevation to provide a reference for clinicians when evelvating the sinus mucoperiosteum.Methods:Sixty-six patients (72 sides) who underwent maxillary sinus floor elevation in Beijing Ruicheng Stomatology Hospital from September 2016 to December 2019 were selected, including 40 males and 26 females, aged 26-80 years old [(56.2±11.5) years]. And fiber optic endoscopy was used to observe the maxillary mucoperiosteum during the operation.Results:The status of maxillary sinus mucoperiosteal during lateral window approach sinus floor elevation can be divided into four categories: ① Class Ⅰ, complete periosteal, no damage to mucoperiosteum; ②Class Ⅱ, periosteal injury, unexposed laminae propria; ③Class Ⅲ, periosteal Rupture, exposed lamina propria; ④ Class Ⅳ, mucoperiosteum perforation, rupture of periosteum, lamina propria and epithelial layer. A total of 72 operations were performed, including 18 cases of class I, 28 cases of class Ⅱ, 4 cases of class Ⅲ, and 22 cases of class Ⅳ.Conclusions:The status of maxillary sinus mucoperiosteal during lateral window approach sinus floor elevation can be divided into four categories. Fiberoptic endoscopy as a clinical auxiliary examination method can improve the operator′s control of the status of the maxillary sinus membrane and assist the peeling of the mucosa.

Oral implantology has experienced more than half a century of development, the theoretical foundation and clinical technology are becoming more mature. This article elaborates on the establishment of implant timing, implant-related bone augmentation technology, surgical alternatives to bone augmentation technology, implant-related soft tissue augmentation technology, and computer-guided surgery. Provide a reference for a comprehensive understanding of dental implant surgery technology and its new developments.