This consensus will introduce the characteristics of fillers used in the surgical cavities of domestic nasal surgery patients based on relevant literature and expert opinions. It will also provide recommendations for the selection of cavity fillers for different nasal diseases, with chronic sinusitis as a representative example.
Humans ; Nasal Cavity/surgery* ; Nasal Surgical Procedures ; China ; Consensus ; Sinusitis/surgery* ; Dermal Fillers

BACKGROUND:Condylar prosthesis replacement,as one of the surgical methods for the treatment of temporomandibular joint diseases,not only needs to restore the morphology and function,but also needs to ensure long-term stable application.OBJECTIVE:To design finite element analysis of a customized Gyroid condylar prosthesis.METHODS:Gyroid structure specimens with different wall thicknesses(250,350,450,550,650,and 750 μm)were designed by software.Finite element simulation compression experiments were carried out to test the elastic modulus of the specimens.The Gyroid structure wall thickness range that matches the elastic modulus of mandibular cancellous bone and whose pore size meets the osteogenesis conditions was screened out.This range was subdivided and Gyroid structure specimens were made using 3D printing technology.Mechanical compression experiments were carried out on a universal testing machine.The Gyroid structure wall thickness that meets the mechanical properties of mandibular bone,has an easier osteogenesis and a smaller strength was screened out by elastic modulus and compressive strength,and subsequent experiments were carried out.A three-dimensional model of a customized Gyroid condylar prosthesis was designed,and the finite element analysis of the blade jaw position and cusp interdigitation position of the model under natural occlusion was simulated.RESULTS AND CONCLUSION:(1)Finite element analysis results showed that with the increase of wall thickness,the elastic modulus of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 350,450,550,650,and 750 μm matched the elastic modulus of mandibular cancellous bone.Since the subsequent experiments needed to be subdivided into groups and the pore size of the 550,650,and 750 μm wall thickness group(pore size 800-1 000 μm)was within the osteogenesis range.Gyroid structure specimens with wall thickness of 550,600,650,700,and 750μm were selected for mechanical compression experiments on a universal testing machine.(2)The results of mechanical compression experiments showed that with the increase of wall thickness,the elastic modulus and compressive strength of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 550,600,and 650 μm was within the elastic modulus of the mandibular cancellous bone.Finally,the wall thickness of 650 μm and the pore size of 900 μm were selected to construct the three-dimensional model of the mandibular customized Gyroid condylar prosthesis.(3)The results of finite element analysis of three-dimensional model of the mandibular customized Gyroid condylar prosthesis showed that the stress of the articular disc in the edge-to-edge occlusion was mainly concentrated on the lower surface of the anterior middle band,and the stress of the articular disc in the interposition of tooth tips was mainly concentrated on the lateral surface of the lower surface.The maximum displacement and the maximum equivalent stress of the left and right articular discs in the edge-to-edge occlusion and the interposition of tooth tips were similar.The maximum displacement was 0.031,0.030,0.028,and 0.018 mm,and the maximum equivalent stress was 2.87,2.30,2.73,and 1.71 MPa,respectively.(4)The results showed that the Gyroid structure with a wall thickness of 650 μm was consistent with the mechanical properties of the mandible,which reduced the strength of the titanium alloy and reduced the damage of the articular disc caused by the customized Gyroid condylar prosthesis.

BACKGROUND:Currently,the mandibular joint prosthesis manufactured at home and abroad needs to rely on screws to fix the condylar part of the prosthesis during the replacement process,and the retention hole is reserved to facilitate the operation during the operation.However,due to the lack of personalized jaw design,the reattachment plate may not fit the jaw,resulting in screw loosening and dislocation.Therefore,personalized condylar prosthesis replacement is of great value in the repair of the temporomandibular joint.OBJECTIVE:To design a personalized condylar prosthesis with an internal GYROID for mandibular condylar repair and reconstruction.METHODS:The GYROID structure was selected in the Rhinoceros 7 software with the single cell size of 6 mm and the wall thickness of 0.2,0.3,0.4,0.5,0.6,0.7,0.8 mm.The mechanical properties of the GYROID structure were analyzed by finite element method.3D printing of GYROID structural test specimens with different wall thickness(0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was performed to test the mechanical properties of the specimens through room temperature compression experiments.A wall thickness value conforming to the range of mandibular mechanical properties was selected through finite element analysis and room temperature compression test results.An adult male mandibular CT data were used for inverse modeling to design a condylar prosthesis with an internal GYROID.Finite element analysis was used to simulate the movement of the apical staggered position and the opposite-blade jaw position after condylar prosthesis replacement.RESULTS AND CONCLUSION:(1)The results of finite element analysis and room temperature compression experiment showed that the elastic modulus of the GYROID structure increased with the increase of wall thickness.The elastic modulus of the GYROID structure with wall thickness of 0.5-0.7 mm was within the range of the elastic modulus of the mandible(1.5-4.0 GPa).Therefore,the 6 mm monocellular GYROID structural model with a wall thickness of 0.6 mm was selected for the design of the condylar prosthesis.(2)The results of finite element analysis showed that the stress distribution of mandibular model was symmetrical.The stress distribution of the two types of occlusion was roughly the same,and the stress peak was not significantly different.The stress concentrated in the neck of the condylar prosthesis,and the stress on the replacement side was slightly larger than that on the healthy side.The maximum equivalent stress of the whole internal fixation model was 269.34 MPa,and the maximum equivalent stress of the screw was 20.14 MPa.The equivalent stress and equivalent strain values of the prosthesis were greater than that of the opposite edge jaw position when the tooth tip was interlaced.The equivalent stress and equivalent strain values of the screw were smaller than that of the opposite edge jaw position when the tooth tip was interlaced.(3)The results showed that the design and retention of the personalized GYROID condylar prosthesis were good,which was consistent with the mechanical conduction of the mandible.

Dental implantology has developed rapidly for over half a century,since pure titanium(99.7％)dental cylindrical threaded implants were exploited and osseointegration was introduced in 1960s by Prof.Br?nemark.The long term retention rates of 10 years or more are over 95％.However,the biological complications jeopardize the long term effects of dental implant treatment seriously.The prevalence of dental implant biological complications varies greatly among different reports resulting from the disparities on the defini-tions of dental implant biological complications.After analyzing and summarizing the major opinions proposed internationally in recent years,the consensus for the definition of dental implant biological complications has been reached.Generally the dental implant biologi-cal implications can be classified into early stage(before restoration)biological complications and late stage(after restoration)biological complications.The early stage biological complications include acute and chronic infections,pain,soft tissue deficiency,and osseointegration failure,etc.The late stage complications include peri-implant diseases(peri-implant mucositis and peri-implantitis),soft tissue deficiency around implant,implant loosening and dropping off,etc.The various risk factors related to different dental implant biological complications,the strategies of the prevention and treatment for the dental implant biological complications have been discussed comprehensively,and the consensus has been reached.It is aimed to advocate the dentist to pay more attention to the early prevention of the biological implant complications,to promote more researches on the implant biological complications,and to help elevate the level of dental implantology in our country.

BACKGROUND:Condylar prosthesis replacement,as one of the surgical methods for the treatment of temporomandibular joint diseases,not only needs to restore the morphology and function,but also needs to ensure long-term stable application.OBJECTIVE:To design finite element analysis of a customized Gyroid condylar prosthesis.METHODS:Gyroid structure specimens with different wall thicknesses(250,350,450,550,650,and 750 μm)were designed by software.Finite element simulation compression experiments were carried out to test the elastic modulus of the specimens.The Gyroid structure wall thickness range that matches the elastic modulus of mandibular cancellous bone and whose pore size meets the osteogenesis conditions was screened out.This range was subdivided and Gyroid structure specimens were made using 3D printing technology.Mechanical compression experiments were carried out on a universal testing machine.The Gyroid structure wall thickness that meets the mechanical properties of mandibular bone,has an easier osteogenesis and a smaller strength was screened out by elastic modulus and compressive strength,and subsequent experiments were carried out.A three-dimensional model of a customized Gyroid condylar prosthesis was designed,and the finite element analysis of the blade jaw position and cusp interdigitation position of the model under natural occlusion was simulated.RESULTS AND CONCLUSION:(1)Finite element analysis results showed that with the increase of wall thickness,the elastic modulus of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 350,450,550,650,and 750 μm matched the elastic modulus of mandibular cancellous bone.Since the subsequent experiments needed to be subdivided into groups and the pore size of the 550,650,and 750 μm wall thickness group(pore size 800-1 000 μm)was within the osteogenesis range.Gyroid structure specimens with wall thickness of 550,600,650,700,and 750μm were selected for mechanical compression experiments on a universal testing machine.(2)The results of mechanical compression experiments showed that with the increase of wall thickness,the elastic modulus and compressive strength of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 550,600,and 650 μm was within the elastic modulus of the mandibular cancellous bone.Finally,the wall thickness of 650 μm and the pore size of 900 μm were selected to construct the three-dimensional model of the mandibular customized Gyroid condylar prosthesis.(3)The results of finite element analysis of three-dimensional model of the mandibular customized Gyroid condylar prosthesis showed that the stress of the articular disc in the edge-to-edge occlusion was mainly concentrated on the lower surface of the anterior middle band,and the stress of the articular disc in the interposition of tooth tips was mainly concentrated on the lateral surface of the lower surface.The maximum displacement and the maximum equivalent stress of the left and right articular discs in the edge-to-edge occlusion and the interposition of tooth tips were similar.The maximum displacement was 0.031,0.030,0.028,and 0.018 mm,and the maximum equivalent stress was 2.87,2.30,2.73,and 1.71 MPa,respectively.(4)The results showed that the Gyroid structure with a wall thickness of 650 μm was consistent with the mechanical properties of the mandible,which reduced the strength of the titanium alloy and reduced the damage of the articular disc caused by the customized Gyroid condylar prosthesis.

Objective To compare TyG index between the patients with CHF and ADHF to eluci-date the metabolic difference between these two stages.Methods A total of 1156 HF patients ad-mitted in Taizhou People's Hospital between January 2020 and December 2022 were enrolled,and according to 2021 ESC Guidelines for Diagnosis and Treatment of Acute and Chronic Heart Fail-ure,they were divided into CHF group(365 cases)and ADHF group(791 cases).The clinical da-ta,results of laboratory tests,and cardiovascular history were collected,and TyG index was calcu-lated.All-cause death outcome was observed in ADHF patients during a follow-up of 1 year.Results The TyG index was significantly lower in the ADHF group than the CHF group[8.27(7.99,8.62)vs 8.35(8.04,8.75),P=0.001].In the ADHF group,the TyG index was positively correlated with SBP,DBP,TC,TG,LDL-C,FPG,HbA1c,BMI,and LVEF,and negatively with age(P＜0.01).In the CHF group,the index was positively correlated with DBP,TC,TG,LDL-C,FPG,BMI,and HbA1c,and negatively with age(P＜0.05,P＜0.01).Both univariate and multiva-riate logistic regression analyses indicated that the TyG index was a protective factor for ADHF(OR=0.647,95％CI:0.503～0.832,P=0.001;OR=0.694,95％CI:0.536～0.898,P=0.005).Multivariate logistic regression analysis showed that the index in ADHF patients was a protective factor for one-year all-cause mortality(OR=0.483,95％CI:0.254-0.916;P=0.026).Conclusion TyG index might be regarded as an important marker for assessing the metabolic status in HF patients and predicting the prognosis in ADHF patients.

Dental implantology has developed rapidly for over half a century,since pure titanium(99.7％)dental cylindrical threaded implants were exploited and osseointegration was introduced in 1960s by Prof.Br?nemark.The long term retention rates of 10 years or more are over 95％.However,the biological complications jeopardize the long term effects of dental implant treatment seriously.The prevalence of dental implant biological complications varies greatly among different reports resulting from the disparities on the defini-tions of dental implant biological complications.After analyzing and summarizing the major opinions proposed internationally in recent years,the consensus for the definition of dental implant biological complications has been reached.Generally the dental implant biologi-cal implications can be classified into early stage(before restoration)biological complications and late stage(after restoration)biological complications.The early stage biological complications include acute and chronic infections,pain,soft tissue deficiency,and osseointegration failure,etc.The late stage complications include peri-implant diseases(peri-implant mucositis and peri-implantitis),soft tissue deficiency around implant,implant loosening and dropping off,etc.The various risk factors related to different dental implant biological complications,the strategies of the prevention and treatment for the dental implant biological complications have been discussed comprehensively,and the consensus has been reached.It is aimed to advocate the dentist to pay more attention to the early prevention of the biological implant complications,to promote more researches on the implant biological complications,and to help elevate the level of dental implantology in our country.

BACKGROUND:Currently,the mandibular joint prosthesis manufactured at home and abroad needs to rely on screws to fix the condylar part of the prosthesis during the replacement process,and the retention hole is reserved to facilitate the operation during the operation.However,due to the lack of personalized jaw design,the reattachment plate may not fit the jaw,resulting in screw loosening and dislocation.Therefore,personalized condylar prosthesis replacement is of great value in the repair of the temporomandibular joint.OBJECTIVE:To design a personalized condylar prosthesis with an internal GYROID for mandibular condylar repair and reconstruction.METHODS:The GYROID structure was selected in the Rhinoceros 7 software with the single cell size of 6 mm and the wall thickness of 0.2,0.3,0.4,0.5,0.6,0.7,0.8 mm.The mechanical properties of the GYROID structure were analyzed by finite element method.3D printing of GYROID structural test specimens with different wall thickness(0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was performed to test the mechanical properties of the specimens through room temperature compression experiments.A wall thickness value conforming to the range of mandibular mechanical properties was selected through finite element analysis and room temperature compression test results.An adult male mandibular CT data were used for inverse modeling to design a condylar prosthesis with an internal GYROID.Finite element analysis was used to simulate the movement of the apical staggered position and the opposite-blade jaw position after condylar prosthesis replacement.RESULTS AND CONCLUSION:(1)The results of finite element analysis and room temperature compression experiment showed that the elastic modulus of the GYROID structure increased with the increase of wall thickness.The elastic modulus of the GYROID structure with wall thickness of 0.5-0.7 mm was within the range of the elastic modulus of the mandible(1.5-4.0 GPa).Therefore,the 6 mm monocellular GYROID structural model with a wall thickness of 0.6 mm was selected for the design of the condylar prosthesis.(2)The results of finite element analysis showed that the stress distribution of mandibular model was symmetrical.The stress distribution of the two types of occlusion was roughly the same,and the stress peak was not significantly different.The stress concentrated in the neck of the condylar prosthesis,and the stress on the replacement side was slightly larger than that on the healthy side.The maximum equivalent stress of the whole internal fixation model was 269.34 MPa,and the maximum equivalent stress of the screw was 20.14 MPa.The equivalent stress and equivalent strain values of the prosthesis were greater than that of the opposite edge jaw position when the tooth tip was interlaced.The equivalent stress and equivalent strain values of the screw were smaller than that of the opposite edge jaw position when the tooth tip was interlaced.(3)The results showed that the design and retention of the personalized GYROID condylar prosthesis were good,which was consistent with the mechanical conduction of the mandible.

Objective To compare TyG index between the patients with CHF and ADHF to eluci-date the metabolic difference between these two stages.Methods A total of 1156 HF patients ad-mitted in Taizhou People's Hospital between January 2020 and December 2022 were enrolled,and according to 2021 ESC Guidelines for Diagnosis and Treatment of Acute and Chronic Heart Fail-ure,they were divided into CHF group(365 cases)and ADHF group(791 cases).The clinical da-ta,results of laboratory tests,and cardiovascular history were collected,and TyG index was calcu-lated.All-cause death outcome was observed in ADHF patients during a follow-up of 1 year.Results The TyG index was significantly lower in the ADHF group than the CHF group[8.27(7.99,8.62)vs 8.35(8.04,8.75),P=0.001].In the ADHF group,the TyG index was positively correlated with SBP,DBP,TC,TG,LDL-C,FPG,HbA1c,BMI,and LVEF,and negatively with age(P＜0.01).In the CHF group,the index was positively correlated with DBP,TC,TG,LDL-C,FPG,BMI,and HbA1c,and negatively with age(P＜0.05,P＜0.01).Both univariate and multiva-riate logistic regression analyses indicated that the TyG index was a protective factor for ADHF(OR=0.647,95％CI:0.503～0.832,P=0.001;OR=0.694,95％CI:0.536～0.898,P=0.005).Multivariate logistic regression analysis showed that the index in ADHF patients was a protective factor for one-year all-cause mortality(OR=0.483,95％CI:0.254-0.916;P=0.026).Conclusion TyG index might be regarded as an important marker for assessing the metabolic status in HF patients and predicting the prognosis in ADHF patients.

Objective: Cardiac magnetic resonance (CMR) is a diagnostic tool that provides precise and reproducible information about cardiac structure, function, and tissue characterization, aiding in the monitoring of chemotherapy response in patients with lightchain cardiac amyloidosis (AL-CA). This study aimed to evaluate the feasibility of CMR in monitoring responses to chemotherapy in patients with AL-CA. Materials and Methods: In this prospective study, we enrolled 111 patients with AL-CA (50.5% male; median age, 54 [interquartile range, 49–63] years). Patients underwent longitudinal monitoring using biomarkers and CMR imaging. At followup after chemotherapy, patients were categorized into superior and inferior response groups based on their hematological and cardiac laboratory responses to chemotherapy. Changes in CMR findings across therapies and differences between response groups were analyzed. Results: Following chemotherapy (before vs. after), there were significant increases in myocardial T2 (43.6 ± 3.5 ms vs. 44.6 ± 4.1 ms; P = 0.008), recovery in right ventricular (RV) longitudinal strain (median of -9.6% vs. -11.7%; P = 0.031), and decrease in RV extracellular volume fraction (ECV) (median of 53.9% vs. 51.6%; P = 0.048). These changes were more pronounced in the superior-response group. Patients with superior cardiac laboratory response showed significantly greater reductions in RV ECV (-2.9% [interquartile range, -8.7%–1.1%] vs. 1.7% [-5.5%–7.1%]; P = 0.017) and left ventricular ECV (-2.0% [-6.0%–1.3%] vs. 2.0% [-3.0%–5.0%]; P = 0.01) compared with those with inferior response. Conclusion Cardiac amyloid deposition can regress following chemotherapy in patients with AL-CA, particularly showing more prominent regression, possibly earlier, in the RV. CMR emerges as an effective tool for monitoring associated tissue characteristics and ventricular functional recovery in patients with AL-CA undergoing chemotherapy, thereby supporting its utility in treatment response assessment.