BACKGROUND:Condylar prosthesis replacement,as one of the surgical methods for the treatment of temporomandibular joint diseases,not only needs to restore the morphology and function,but also needs to ensure long-term stable application.OBJECTIVE:To design finite element analysis of a customized Gyroid condylar prosthesis.METHODS:Gyroid structure specimens with different wall thicknesses(250,350,450,550,650,and 750 μm)were designed by software.Finite element simulation compression experiments were carried out to test the elastic modulus of the specimens.The Gyroid structure wall thickness range that matches the elastic modulus of mandibular cancellous bone and whose pore size meets the osteogenesis conditions was screened out.This range was subdivided and Gyroid structure specimens were made using 3D printing technology.Mechanical compression experiments were carried out on a universal testing machine.The Gyroid structure wall thickness that meets the mechanical properties of mandibular bone,has an easier osteogenesis and a smaller strength was screened out by elastic modulus and compressive strength,and subsequent experiments were carried out.A three-dimensional model of a customized Gyroid condylar prosthesis was designed,and the finite element analysis of the blade jaw position and cusp interdigitation position of the model under natural occlusion was simulated.RESULTS AND CONCLUSION:(1)Finite element analysis results showed that with the increase of wall thickness,the elastic modulus of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 350,450,550,650,and 750 μm matched the elastic modulus of mandibular cancellous bone.Since the subsequent experiments needed to be subdivided into groups and the pore size of the 550,650,and 750 μm wall thickness group(pore size 800-1 000 μm)was within the osteogenesis range.Gyroid structure specimens with wall thickness of 550,600,650,700,and 750μm were selected for mechanical compression experiments on a universal testing machine.(2)The results of mechanical compression experiments showed that with the increase of wall thickness,the elastic modulus and compressive strength of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 550,600,and 650 μm was within the elastic modulus of the mandibular cancellous bone.Finally,the wall thickness of 650 μm and the pore size of 900 μm were selected to construct the three-dimensional model of the mandibular customized Gyroid condylar prosthesis.(3)The results of finite element analysis of three-dimensional model of the mandibular customized Gyroid condylar prosthesis showed that the stress of the articular disc in the edge-to-edge occlusion was mainly concentrated on the lower surface of the anterior middle band,and the stress of the articular disc in the interposition of tooth tips was mainly concentrated on the lateral surface of the lower surface.The maximum displacement and the maximum equivalent stress of the left and right articular discs in the edge-to-edge occlusion and the interposition of tooth tips were similar.The maximum displacement was 0.031,0.030,0.028,and 0.018 mm,and the maximum equivalent stress was 2.87,2.30,2.73,and 1.71 MPa,respectively.(4)The results showed that the Gyroid structure with a wall thickness of 650 μm was consistent with the mechanical properties of the mandible,which reduced the strength of the titanium alloy and reduced the damage of the articular disc caused by the customized Gyroid condylar prosthesis.

Objective To explore the biological mechanism of radiation resistance in esophageal squamous cell carcinoma(ESCC)and search for effective sensitization targets.Methods We retrieved 186 signaling pathways and related gene information from the MSigDB database.We also obtained RNA transcriptome data of ESCC patients using the Cancer Genome Atlas(TCGA)and Gene Expression Omnibus(GEO)databases.We collected clinical pathological characteristics and tissue samples of 97 ESCC patients in our hospital from 2013 to 2020.Gene set variation analysis(GSVA)was made to calculate KEGG signaling pathway score,radiotherapy resistance related signaling pathways were screened through random forest algorithm,key genes in the pathway were screened using DESeq2,and a radiotherapy efficacy prediction model was constructed based on support vector machine-recursive feature elimination(SVM-RFE).The results were validated through experiments such as Western blotting and clonogenic assay.Results Based on the KEGG signaling pathway and GSVA enrichment score,random forest analysis showed that in the TCGA and GSE45670 cohorts,the contribution of tryptophan metabolism pathway enrichment values to radiation resistance in ESCC was significantly better than that of the other pathways.DESeq2 analysis revealed that key molecules in the tryptophan metabolism pathway,namely,IDO1,ALDH1B1,AOC1,INMT,AFMID and ALDH7A1,were significantly differentially expressed in the resistant and sensitive groups of ESCC.Based on the SVM-RFE algorithm,the AUC was 0.77,which could accurately predict the radiotherapy efficacy of ESCC.Western blotting experiments showed that IDO1 was highly expressed in ESCC cells,and IDO1 inhibitor treatment significantly inhibited the survival ability and radiosensitivity of KYSE-410 cells.In the enrolled patients of our hospital,immunohistochemical studies showed that IDO1 was highly expressed in the radiotherapy resistant group of ESCC and was associated with poor radiotherapy prognosis in ESCC patients.In addition,further testing showed that the expression of IDO1 in patient samples from our hospital was positively correlated with its PD-L1 expression,but negatively correlated with the infiltration ratio of CD3/CD8 immune cells.Conclusion Tryptophan catabolism is associated with radiation resistance in ESCC,and the key enzyme IDO1 in tryptophan metabolism can be used as a therapeutic target for radiosensitization in ESCC.

A case of Sifrim-Hitz-Weiss syndrome(Sifrim-Hitz-Weiss syndrome,SIHIWES)is presented.The patient was a 35-year-old male with cryptorchidism,growth retardation,skeletal malformations,muscular atrophy,a wide forehead,special facial features like square face,small low-set and cup-shaped ears since birth.Whole-exon sequencing identified a heterozygous mutation(NM_001273:c.3047A>G(chr12-6701125)(p.K1016R))in CHD4 gene.The clinical significance of this mutation is currently unknown,and has not been previously reported.In light of the patient's symptoms,the case was diagnosed as Sifrim-Hitz-Weiss syndrome.This case represents the first instance of Sifrim-Hitz-Weiss syndrome in an adult patient in China.

Objective To discuss the causes and the therapeutic strategy of acute cardiac tamponade(ACT)occurring as a complication of transcatheter aortic valve replacement(TAVR)so as to improve the success rate of the surgery and to make a further understanding of this complication.Methods The general clinical data,surgical procedures,and postoperative follow-up results of five patients,who received TAVR at the Affiliated Northern Jiangsu People's Hospital of Yangzhou University of China and developed ACT from March 2018 to September 2024,were retrospectively analyzed.Results After developing ACT,all the 5 patients received pericardiocentesis together with other adjuvant therapies including blood volume expansion with infusion,vasopressors,heparin neutralization,and blood transfusion.However,due to no obvious reduction in drainage volume and unstable hemodynamics all the 5 patients had eventually to receive open-chest surgery to identify the source of bleeding and to make hemostasis.Surgical exploration revealed that the perforation or rupture of cardiac structures caused by the temporary pacemaker lead or a super-stiff guide wire during the procedure was the main cause of ACT.Finally,after active treatment four patients recovered and discharged,and one patient died.The discharged patients were followed up for 3-12 months,and no procedure-related complications such as acute coronary artery occlusion,severe arrhythmia,exacerbation of heart failure symptoms,valve displacement,or stroke occurred.Conclusion As a severe complication occurring during the TAVR procedure,ACT requires to get a rapid diagnosis and management.Improvement of surgical techniques and operative methods,comprehensive preoperative assessment,and close intraoperative monitoring are crucial points for the prevention of ACT.

BACKGROUND:Endometrial receptivity is a key factor in embryo implantation in northwest Tibetan cashmere goats,and the expression of genes related to endometrial receptivity and their variable splicing are still unclear. OBJECTIVE:To analyze and explore genes and variable splicing events related to endometrial receptivity in northwest Tibetan cashmere goats. METHODS:On days 5 and 15 of pregnancy(representing pre receptive endometrium group and receptive endometrium group),three northwest Tibetan cashmere goats were randomly selected.Endometrial tissue was collected and stained with hematoxylin and eosin to observe tissue morphology.Immunohistochemical staining was used to detect the expression of endometrial receptive marker proteins leukemia inhibitory factor and vascular endothelial growth factor.After the total RNA was extracted and the quality test was qualified,transcriptome sequencing was performed to search differentially expressed mRNAs,lncRNAs,circRNAs,and miRNAs,perform functional prediction,and analyze alternative splicing mRNAs and lncRNAs related to endometrial receptivity. RESULTS AND CONCLUSION:(1)Compared with the pre receptive endometrium group,the expression levels of leukemia inhibitory factor and vascular endothelial growth factor proteins in the endometrial tissue of the receptive endometrium group were significantly increased.(2)The sequencing results showed that the differentially expressed genes were mostly mRNA and lncRNA genes,including 250 upregulated mRNAs,193 upregulated lncRNAs,135 downregulated mRNAs,and 123 downregulated lncRNAs,which were significantly enriched in the Wnt,Hedgehog,and Hippo signaling pathways.(3)Alternative splicing event analysis uncovered 8 differentially expressed variable splicing transcripts,which were all mRNA transcripts,including 2 downregulated and 6 upregulated,and were significantly associated with vascular endothelial growth factor receptor signaling,cell motility,and embryonic development.

BACKGROUND:Currently,the mandibular joint prosthesis manufactured at home and abroad needs to rely on screws to fix the condylar part of the prosthesis during the replacement process,and the retention hole is reserved to facilitate the operation during the operation.However,due to the lack of personalized jaw design,the reattachment plate may not fit the jaw,resulting in screw loosening and dislocation.Therefore,personalized condylar prosthesis replacement is of great value in the repair of the temporomandibular joint.OBJECTIVE:To design a personalized condylar prosthesis with an internal GYROID for mandibular condylar repair and reconstruction.METHODS:The GYROID structure was selected in the Rhinoceros 7 software with the single cell size of 6 mm and the wall thickness of 0.2,0.3,0.4,0.5,0.6,0.7,0.8 mm.The mechanical properties of the GYROID structure were analyzed by finite element method.3D printing of GYROID structural test specimens with different wall thickness(0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was performed to test the mechanical properties of the specimens through room temperature compression experiments.A wall thickness value conforming to the range of mandibular mechanical properties was selected through finite element analysis and room temperature compression test results.An adult male mandibular CT data were used for inverse modeling to design a condylar prosthesis with an internal GYROID.Finite element analysis was used to simulate the movement of the apical staggered position and the opposite-blade jaw position after condylar prosthesis replacement.RESULTS AND CONCLUSION:(1)The results of finite element analysis and room temperature compression experiment showed that the elastic modulus of the GYROID structure increased with the increase of wall thickness.The elastic modulus of the GYROID structure with wall thickness of 0.5-0.7 mm was within the range of the elastic modulus of the mandible(1.5-4.0 GPa).Therefore,the 6 mm monocellular GYROID structural model with a wall thickness of 0.6 mm was selected for the design of the condylar prosthesis.(2)The results of finite element analysis showed that the stress distribution of mandibular model was symmetrical.The stress distribution of the two types of occlusion was roughly the same,and the stress peak was not significantly different.The stress concentrated in the neck of the condylar prosthesis,and the stress on the replacement side was slightly larger than that on the healthy side.The maximum equivalent stress of the whole internal fixation model was 269.34 MPa,and the maximum equivalent stress of the screw was 20.14 MPa.The equivalent stress and equivalent strain values of the prosthesis were greater than that of the opposite edge jaw position when the tooth tip was interlaced.The equivalent stress and equivalent strain values of the screw were smaller than that of the opposite edge jaw position when the tooth tip was interlaced.(3)The results showed that the design and retention of the personalized GYROID condylar prosthesis were good,which was consistent with the mechanical conduction of the mandible.

BACKGROUND:Porous structures based on triple periodic minimal surfaces are one of the most promising orthopedic biostructures,among which the Gyroid structure is characterized by high specific surface area,high permeability,and zero mean curvature.OBJECTIVE:To screen the wall thickness interval of TC4 bionic bone scaffolds with 4 mm single-cell Gyroid structure matching the elastic modulus range of cancellous bone of the mandible through finite element analysis combined with mechanical compression test testing.METHODS:The finite element model of the 4 mm single-cell Gyroid structure with different wall thickths(0.1,0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was established.The equivalent elastic modulus of the Gyroid structure was analyzed,and the wall thickness interval of the Gyroid structure matching the elastic modulus range of the maxillary resinous bone was selected with different wall thicknesses of 0.2,0.3,0.4,0.5,0.6,and 0.7 mm,respectively.According to finite element analysis screening results,the material selected was Ti6Al4V.Selective laser melting was used to prepare 3D printed Gyroid structure specimens.The surface treatment was carried out by large-grained sand blasting and acid etching.The elastic modulus and compressive strength of the specimen were tested by mechanical compression experiment.RESULTS AND CONCLUSION:(1)The finite element analysis results showed that the equivalent elastic modulus of the Gyroid structure increased with the increase of wall thickness,and the equivalent elastic modulus of the Gyroid structure with wall thickness of 0.2-0.7 mm was within the range of the elastic modulus of the spongy bone of the mandible(1.5-4.0 GPa),which was used for 3D printing of the Gyroid structure specimen.(2)The mechanical compression test results showed that the elastic modulus and compressive strength of the Gyroid structural specimen increased with the increase of wall thickness,and the elastic modulus of the Gyroid structural specimen with wall thickness of 0.3-0.5 mm was within the range of the elastic modulus of the cancellous bone of the mandible.The compressive strength of the Gyroid specimen with 0.3-0.7 mm wall thickness was consistent with the mechanical properties of the mandible.(3)The results show that the Gyroid structure of 0.3-0.5 mm wall thickness is compatible with the range of elastic modulus of the mandible.

BACKGROUND:Currently,the mandibular joint prosthesis manufactured at home and abroad needs to rely on screws to fix the condylar part of the prosthesis during the replacement process,and the retention hole is reserved to facilitate the operation during the operation.However,due to the lack of personalized jaw design,the reattachment plate may not fit the jaw,resulting in screw loosening and dislocation.Therefore,personalized condylar prosthesis replacement is of great value in the repair of the temporomandibular joint.OBJECTIVE:To design a personalized condylar prosthesis with an internal GYROID for mandibular condylar repair and reconstruction.METHODS:The GYROID structure was selected in the Rhinoceros 7 software with the single cell size of 6 mm and the wall thickness of 0.2,0.3,0.4,0.5,0.6,0.7,0.8 mm.The mechanical properties of the GYROID structure were analyzed by finite element method.3D printing of GYROID structural test specimens with different wall thickness(0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was performed to test the mechanical properties of the specimens through room temperature compression experiments.A wall thickness value conforming to the range of mandibular mechanical properties was selected through finite element analysis and room temperature compression test results.An adult male mandibular CT data were used for inverse modeling to design a condylar prosthesis with an internal GYROID.Finite element analysis was used to simulate the movement of the apical staggered position and the opposite-blade jaw position after condylar prosthesis replacement.RESULTS AND CONCLUSION:(1)The results of finite element analysis and room temperature compression experiment showed that the elastic modulus of the GYROID structure increased with the increase of wall thickness.The elastic modulus of the GYROID structure with wall thickness of 0.5-0.7 mm was within the range of the elastic modulus of the mandible(1.5-4.0 GPa).Therefore,the 6 mm monocellular GYROID structural model with a wall thickness of 0.6 mm was selected for the design of the condylar prosthesis.(2)The results of finite element analysis showed that the stress distribution of mandibular model was symmetrical.The stress distribution of the two types of occlusion was roughly the same,and the stress peak was not significantly different.The stress concentrated in the neck of the condylar prosthesis,and the stress on the replacement side was slightly larger than that on the healthy side.The maximum equivalent stress of the whole internal fixation model was 269.34 MPa,and the maximum equivalent stress of the screw was 20.14 MPa.The equivalent stress and equivalent strain values of the prosthesis were greater than that of the opposite edge jaw position when the tooth tip was interlaced.The equivalent stress and equivalent strain values of the screw were smaller than that of the opposite edge jaw position when the tooth tip was interlaced.(3)The results showed that the design and retention of the personalized GYROID condylar prosthesis were good,which was consistent with the mechanical conduction of the mandible.

BACKGROUND:Porous structures based on triple periodic minimal surfaces are one of the most promising orthopedic biostructures,among which the Gyroid structure is characterized by high specific surface area,high permeability,and zero mean curvature.OBJECTIVE:To screen the wall thickness interval of TC4 bionic bone scaffolds with 4 mm single-cell Gyroid structure matching the elastic modulus range of cancellous bone of the mandible through finite element analysis combined with mechanical compression test testing.METHODS:The finite element model of the 4 mm single-cell Gyroid structure with different wall thickths(0.1,0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was established.The equivalent elastic modulus of the Gyroid structure was analyzed,and the wall thickness interval of the Gyroid structure matching the elastic modulus range of the maxillary resinous bone was selected with different wall thicknesses of 0.2,0.3,0.4,0.5,0.6,and 0.7 mm,respectively.According to finite element analysis screening results,the material selected was Ti6Al4V.Selective laser melting was used to prepare 3D printed Gyroid structure specimens.The surface treatment was carried out by large-grained sand blasting and acid etching.The elastic modulus and compressive strength of the specimen were tested by mechanical compression experiment.RESULTS AND CONCLUSION:(1)The finite element analysis results showed that the equivalent elastic modulus of the Gyroid structure increased with the increase of wall thickness,and the equivalent elastic modulus of the Gyroid structure with wall thickness of 0.2-0.7 mm was within the range of the elastic modulus of the spongy bone of the mandible(1.5-4.0 GPa),which was used for 3D printing of the Gyroid structure specimen.(2)The mechanical compression test results showed that the elastic modulus and compressive strength of the Gyroid structural specimen increased with the increase of wall thickness,and the elastic modulus of the Gyroid structural specimen with wall thickness of 0.3-0.5 mm was within the range of the elastic modulus of the cancellous bone of the mandible.The compressive strength of the Gyroid specimen with 0.3-0.7 mm wall thickness was consistent with the mechanical properties of the mandible.(3)The results show that the Gyroid structure of 0.3-0.5 mm wall thickness is compatible with the range of elastic modulus of the mandible.

A case of Sifrim-Hitz-Weiss syndrome(Sifrim-Hitz-Weiss syndrome,SIHIWES)is presented.The patient was a 35-year-old male with cryptorchidism,growth retardation,skeletal malformations,muscular atrophy,a wide forehead,special facial features like square face,small low-set and cup-shaped ears since birth.Whole-exon sequencing identified a heterozygous mutation(NM_001273:c.3047A>G(chr12-6701125)(p.K1016R))in CHD4 gene.The clinical significance of this mutation is currently unknown,and has not been previously reported.In light of the patient's symptoms,the case was diagnosed as Sifrim-Hitz-Weiss syndrome.This case represents the first instance of Sifrim-Hitz-Weiss syndrome in an adult patient in China.