Objective:To investigate the interventional effect of Rhizoma Corydalis on mice with ulcerative colitis(UC)induced by dextran sulfate sodium(DSS),as well as the potential mechanism of Rhizoma Corydalis in the treatment of UC based on metabolomics and inflammation biomarkers.Methods:A mouse model of UC was established,and then the mice were divided into model group,high-dose group(1.517 g/kg crude drug),middle-dose group(0.986 g/kg crude drug),low-dose group(0.455 g/kg crude drug),and positive drug group(5-aminosalicylic acid at a dose of 718.8 mg/kg),while the mice without modeling were selected as normal group(0.9%NaCl by gavage).The mice in each group were administered for 7 consecutive days,and phenotypic parameters were dynamically moni-tored,such as body weight change,disease activity index(DAI),mean daily food intake,and daily water intake.The mice were sacri-ficed after 7 days to collect serum and colon tissue samples;ELISA was used to measure the serum levels of the proinflammatory fac-tors interleukin-6(IL-6),interleukin-17A(IL-17A),C-reactive protein(CRP),and tumor necrosis factor-α(TNF-α),and ultra-performance liquid chromatography-quadrupole time-of-flight mass spectrometry(UPLC-Q-TOF/MS)was used to perform the non-targeted metabolomics analysis and compare the differences in se-rum metabolite profiles between groups.The mice were selected for modeling and validation with the same method,and glutathione(GSH)was selected as the positive drug.Colon length and mucosal damage were assessed,and quantitative real-time PCR was used to measure the relative mRNA expression levels of the key genes in the glutathione synthesis pathway(γ-glutamylcysteine synthetase[γ-GCS]and oxidative stress regulators yap1p and skn7)and mito-chondrial GSH transporter protein(Slc25a39)in colonic tissue.Results:Rhizoma Corydalis significantly improved weight loss,DAI,and colon length in a dose-dependent manner in the model animals,and there were reductions in the serum levels of IL-6,CRP,and TNF-α,while it had no significant effect on IL-17A.The metabolomics analysis revealed 21 potential biomarkers associated with amino acid and lipid metabolism,which were significantly regulated by Rhizoma Corydalis.In the verification experiment,both Rhi-zoma Corydalis and GSH exerted a significant protective effect against colonic mucosal damage without affecting colon length.Rhizoma Corydalis upregulated the expression of genes associated with glutathione synthesis,especially γ-GCS,suggesting that Rhizoma Co-rydalis could enhance intestinal antioxidant defenses.Conclusion:Rhizoma Corydalis has a therapeutic potential in a mouse model of DSS-induced UC and can alleviate symptoms,reduce the serum levels of inflammatory markers,and regulate metabolic pathways,and upregulation of the genes associated with glutathione synthesis suggests that the drug can enhance intestinal antioxidant defenses.

BACKGROUND:Patients with degenerative cervical spondylosis often suffer from changed varicosity of the cervical spine,unbalanced neck-shoulder muscular strength,and descending power. OBJECTIVE:To probe into the correlation between sagittal curvature parameters and pain threshold for neck-shoulder muscles in degenerative cervical spondylosis. METHODS:Totally 50 patients with degenerative cervical spondylosis received treatment at the 3D Printed Outpatient Center of Shanghai Ninth People's Hospital,Shanghai Jiao Tong University School of Medicine from January 2022 to March 2023 were included in the study.After excluding the 10 patients of cervical lateral projection that failed to meet the measurement conditions,the cervical lateral projections were shot to measure the following iconography parameters:Borden value and C2-7 Cobb angle as well as pain thresholds on the midpoint of the superior trapezius muscle in bilateral bundles and at 1 cm beside the C5-6 interspike.The correlation between sagittal curvature parameters and pain threshold of neck-shoulder muscles in degenerative cervical spondylosis was analyzed. RESULTS AND CONCLUSION:(1)The Borden value of sagittal curvature showed a moderately positive correlation with the bundle pain threshold in the left upper trapezius muscle,the bundle pain threshold in the right upper trapezius muscle,and the pain threshold at the 1 cm of the left side beside the C5-6 interspike(r=0.498,P<0.01;r=0.448,P<0.05;r=0.405,P<0.05)and a weak positive correlation with the pain threshold at the 1 cm of the right side beside the C5-6 interspike(r=0.322,P<0.05).(2)The C2-7 Cobb angle showed a weak positive correlation with the left squared myalgia threshold(r=0.355,P<0.05),and there was no correlation with the pain threshold of the left trapezius muscle and the pain threshold at the 1 cm of both sides beside the C5-6 interspike.(3)There was a correlation between the pain threshold of the neck-shoulder muscles,and a high correlation between the pain threshold of the left and right muscles and the pain threshold within the left and right side muscles,indicating that the neck-shoulder muscles are consistent and may be related to the coordination of the neck-shoulder movements.

BACKGROUND:Traditional scoliosis orthosis has some disadvantages,such as complex manufacturing process,long processing cycle,poor fit and so on.Three-dimensional printed scoliosis orthosis has the advantages of high manufacturing precision and personalization. OBJECTIVE:To evaluate the efficacy of three-dimensional printed scoliosis orthosis for scoliosis based on multi-criteria decision model. METHODS:Clinical data of 72 patients with scoliosis admitted to Chen Xinghai Hospital of Integrated Traditional Chinese and Western Medicine from January 2019 to October 2022 were retrospectively collected and divided into two groups according to the treatment of orthosis.Study group(n=23)received three-dimensional printed scoliosis orthosis.Traditional group(n=49)received the traditional polypropylene spine brace treatment.The clinical efficacy and complications were compared between the two groups.A multi-criteria decision model for the treatment of scoliosis with three-dimensional printed scoliosis orthosis was established,and the stability of the benefit value,risk value and decision model of the two groups were evaluated. RESULTS AND CONCLUSION:(1)Compared with the traditional group,there were significant differences in the top vertebral offset distance,Cobb angle,top vertebral rotation,Functional Movement Screen score,visual analog scale score and total effective rate in the study group at 6 months after surgery(P<0.05).(2)Among the benefit indexes,Cobb angle had the greatest impact on the condition of patients,while the risk indexes had the greatest impact on dyspnea.(3)The benefit values of the study group and the traditional group for scoliosis were 79 and 64,and the risk values were 74 and 57,respectively.The combined benefit and risk values found that the benefit-risk value of the study group was 16 higher than that of the traditional group.(4)In the range of 0-100%relative risk weight,the benefit-risk value of the study group was always higher than that of the traditional group,which proved that the multi-criteria decision-making model had good stability.(5)It is indicated that three-dimensional printed scoliosis orthosis can better restore the physiological curvature of scoliosis and improve the efficiency of treatment.

BACKGROUND:Red light therapy has the non-invasive and cost-effective characteristics,and is widely used in various acute and chronic pains in clinic.However,currently,the phototherapy equipment used in clinic is expensive and has certain site limitations,so it is necessary to explore more convenient and economical phototherapy applications. OBJECTIVE:To observe the clinical efficacy of a self-developed photon cervical vertebra massage instrument for chronic neck pain. METHODS:From November 2022 to February 2023,24 patients with chronic neck pain were recruited from the Department of Rehabilitation Medicine,Ninth People's Hospital Affiliated to Shanghai Jiao Tong University School of Medicine,including 18 females and 6 males,with a mean age of(29.67±6.40)years.The body mass index was(21.39±3.52)kg/m2.Photon cervical vertebra massage instrument was used twice a day for 20 minutes each time for four weeks.The changes in visual analog scale score,pressure pain threshold,neck active activity,neck disability index,and Pittsburgh sleep quality index were observed before,after 2 and 4 weeks of treatment. RESULTS AND CONCLUSION:(1)Compared with before treatment,after four weeks of treatment,visual analog scale score,pressure pain threshold,neck disability index,and Pittsburgh sleep quality index were all improved(P<0.05),while some cervical motion(extension,left and right rotation)improved(P<0.05)after 4 weeks of treatment.(2)Bilateral visual analog scale scores,left trapezius muscle pressure pain threshold,C5C6 pressure pain threshold,and neck disability index improved after 2 weeks of treatment(P<0.05).(3)It is indicated that the application of photon cervical vertebra massage instrument can improve the pain score,muscle tenderness,sleep quality,functional level,and partial active activity of patients with chronic neck pain in a short period,and is a convenient,effective,and safe treatment method.

OBJECTIVE To study the toxicity-reducing effects and mechanisms of Niuhuang Jiedu Tablets(NHJDT)by gas chromatography-mass spectrometry(GC-MS)metabolomics.METHODS 24 mice were randomly divided into control,realgar(1.0 g·kg-1)and NHDJT(1.0 g·kg-1)groups with 8 mice in each group.The liver and kidney of mice were collected for patho-logic examination after 14 d oral administration to mice.The content of alanine aminotransferase(ALT)and aspartate aminotransferase(AST)in liver and creatinine(Cr)and uric acid(UA)in kidney was also determined.The differences of endogenous metabolites in liver and kidney were further analyzed by GC-MS metabolomics.RESULTS The contents of ALT and AST in the liver as well as the Cr and UA in kidney of mice were significantly changed after NHJDT intervention(P<0.05).NHJDT alleviated the pathological dam-age of liver and kidney in mice.A total of 17 biomarkers related to detoxification were screened,including citric acid,ascorbic acid,asparagine,levodopa and phenylalanine.The changes of metabolites mainly involved in glutamine and glutamate metabolism,arginine biosynthesis,tryptophan metabolism,tyrosine and tryptophan biosynthesis,and phenylalanine metabolism.CONCLUSION NHJDT with compound compatibility could reduce the hepatorenal toxicity of realgar.The detoxification mechanism may be related to the regu-lation of amino acid metabolism.

Objective This study analyzes the risk points in the quality control of bioink and the main processes of bioprinting,clarifies and explores the quality control and supervision model for bioprinting medical devices,and provides theoretical and practical guidance to ensure the safety and effectiveness of bioprinting medical devices.Methods The quality control risk points throughout the bioprinting process were comprehensively analyzed,with a particular focus on bioprinting materials and key processes.The regulatory model and methods for bioprinting medical devices were examined.This research concentrated on critical technologies such as extrusion,laser-assisted,and in situ bioprinting,assessing their potential for clinical applications and regulatory challenges.Results Bioink from different sources should meet regulatory requirements.It is essential to ensure aseptic handling of raw materials and to validate sterilization under"worst-case"conditions.Conclusion As bioprinting technology advances rapidly,corresponding research into materials,processes,and quality risk control should be conducted to ensure the concurrent development of the regulatory system.This will continuously contribute to the orderly progression of the entire industry and human health.

Objective:To explore whether Corona Virus Disease 2019 (COVID-19) has any impact on human centrifuge training of flying cadets and to provide references to the human centrifuge training for the recovered flying personnel by comparing the changes of flying cadets′ G-tolerance and physiological indicators in human centrifuge training.Methods:Twelve flying cadets who underwent the current batch of human centrifuge training in 2022 were selected and divided into rehabilitation group and control group according to whether they had been infected with COVID-19, with 6 in each group. The rapid G onset rate (ROR) and gradual G onset rate (GOR) were respectively chosen for human centrifuge test. At the same time, the changes of their heart rate and respiratory rate during the tests were recorded, and the G-tolerance situations of the subjects were collected.Results:The average relaxed G-tolerance under GOR (GOR tolerance 1) was (4.2±0.8) G in rehabilitation group, and their average anti-G straining maneuver aided G-tolerance under GOR (GOR tolerance 2) was (5.7±0.6) G. Compared with that of the control group, there was no significant difference in GOR tolerance 1 and GOR tolerance 2 (both P>0.05). There was no significant changes in heart rate and respiratory rate in ROR and GOR human centrifuge tests between 2 groups (all P>0.05). Conclusions:COVID-19 didn't impact the recovered flying cadets' performance in human centrifuge training, as well as the anti-G straining maneuver effect and cardiovascular regulation.

Objective:To explore whether Corona Virus Disease 2019 (COVID-19) has any impact on human centrifuge training of flying cadets and to provide references to the human centrifuge training for the recovered flying personnel by comparing the changes of flying cadets′ G-tolerance and physiological indicators in human centrifuge training.Methods:Twelve flying cadets who underwent the current batch of human centrifuge training in 2022 were selected and divided into rehabilitation group and control group according to whether they had been infected with COVID-19, with 6 in each group. The rapid G onset rate (ROR) and gradual G onset rate (GOR) were respectively chosen for human centrifuge test. At the same time, the changes of their heart rate and respiratory rate during the tests were recorded, and the G-tolerance situations of the subjects were collected.Results:The average relaxed G-tolerance under GOR (GOR tolerance 1) was (4.2±0.8) G in rehabilitation group, and their average anti-G straining maneuver aided G-tolerance under GOR (GOR tolerance 2) was (5.7±0.6) G. Compared with that of the control group, there was no significant difference in GOR tolerance 1 and GOR tolerance 2 (both P>0.05). There was no significant changes in heart rate and respiratory rate in ROR and GOR human centrifuge tests between 2 groups (all P>0.05). Conclusions:COVID-19 didn't impact the recovered flying cadets' performance in human centrifuge training, as well as the anti-G straining maneuver effect and cardiovascular regulation.

Objective:To discuss the composition and connotation of practical training objectives for nurses specialized in intravenous therapy, and provide guidance and reference for standardizing the practical training of nurses specialized in intravenous therapy.Methods:In this phenomenological analysis in qualitative research, 13 intravenous treatment and nursing experts from Shandong, Zhejiang, Sichuan, and Shaanxi provinces were selected from May to July 2021 for semi-structured interviews. Colaizzi's 7-step method and Nvivo 12.0 were used to organize data and analyze and refine themes.Results:Three themes and 12 subthemes were extracted for the practical training of intravenous therapy nurses, including knowledge objectives, ability objectives, and well-rounded objectives.Conclusions:Attention should be paid to the setting of clinical professional knowledge, skills and comprehensive quality goals for nurses specialized in intravenous therapy, so as to improve the pertinence and timeliness of training, promote the quality of training and the professional development of specialized training for intravenous therapy.

Objective To study topological structure of a new type of three-dimensional (3D) printed height increasing insoles for leg length discrepancy (LLD) and its effect on biomechanics of lower limbs. Methods Topological structure for middle and rear part of the insole was optimized by solid isotropic microstructures with penalization (SIMP), the force was loaded and the boundary conditions were set according to force area of the insole, and the height increasing insole with thermoplastic polyurethanes (TPU) materials was printed by selected laser sintering (SLS). The insoles were used in 9 patients with LLD, visual analogue scale (VAS) and Maryland foot function scores were used to compare pain and foot function changes of patients before and after using the insole, and the 3D gait analysis system was used to compare spatiotemporal parameters and vertical ground reaction force (vGRF) of both lower limbs. Result sAfter the patient wore 3D printed insole, VAS scores decreased, Maryland foot function scores increased, vGRF of both lower limbs decreased, and the difference of cadence, stance phase and swing phase in both lower limbs decreased. Conclusions The 3D printed height increasing insole after topology optimization can improve coordination of lower limb movement, reduce ground impact, relieve pain and improve foot function, thus providing an effective personalized orthopedic plan for LLD treatment in clinic.