Mammalian male germline development depends on a specialized gonadal somatic microenvironment. However, itsin vitro reconstruction remains challenging. Major barriers include the generation of appropriate supporting-cell lineages, organized tissue architecture, and culture conditions that sustain germ-cell maturation. Yoshino et al. established a mouse pluripotent stem cell-derived testicular organoid model. This model reconstitutes the sex-determining region Y (Sry)-SRY-box transcription factor 9 (Sox9)‑mediated sex-determination program and generates testicular somatic cell-like cells (TesLCs). When assembled with primordial germ cell-like cells (PGCLCs), TesLCs formed seminiferous tubule-like structures and supported male germline progression toward prospermatogonia and germline stem cell-like cells (GSCLCs). After transplantation into infertile recipient testes, organoid-derived GSCLCs produced fertilization-competent sperm and generated fertile offspring. The major significance of this work extends beyond sperm production. It integrates sex determination, germ-cell fate transition, and testicular niche self-organization into an experimentally tractable organoid system. This commentary discusses the technical strategy, sex-determination mechanism, value of testicular niche reconstruction, and translational limitations of this study. It also highlights its implications for in vitro gametogenesis, male infertility modeling, and reproductive medicine.

Objective To develop a deep learning model based on fundus retinal images to improve the detection rate of mild cognitive impairment(MCI)in patients with coronary heart disease,achieve early intervention and improve prognosis.Methods The study was a single-center cross-sectional study that retrospectively included patients diagnosed with coronary heart disease(CHD)by coronary angiography(≥50％ stenosis of at least one coronary vessel)from Beijing Anzhen Hospital between November 2021 and December 2022.The whole data set was randomly divided into the training set and the testing set according to the ratio of 8∶2 for model development.After that,the patient data of the same center from January 2023 to April 2023 were included in the time verification method to verify the model.The diagnostic criteria for MCI were MMSE＜27 or MoCA＜26.Four kinds of convolutional neural network(CNN)architectures were used to train fundus images,and a comprehensive vision model of MCI detection was established through model integration.The area under the curve(AUC),sensitivity and specificity of the receiver operating curve(ROC)were used to evaluate the performance of the AI model.Results We collected 5 880 eligible fundus images from 3 368 CHD patients.Based on the results of the MMSE scale,the algorithm was labeled,including 2 898 males and 527 MCI patients.The AUC of the deep learning model in the test group is 0.733(95％CI 0.688-0.778),and the sensitivity of the algorithm in the test group is 0.577(95％CI 0.528-0.625)by using the operating point with the maximum sum of sensitivity and specificity.With a specificity of 0.758(95％CI 0.714-0.802),corresponding to a validated AUC of 0.710(95％CI 0.601-0.818).Based on the results of the MoCA scale,the algorithm labels 2 437 males and 1 626 MCI patients.The AUC of the deep learning model in the test group was 0.702(95％CI 0.671-0.733).The operating point with the maximum sum of sensitivity and specificity was selected,and the sensitivity of the algorithm was 0.749(95％CI 0.719-0.778)and the specificity was 0.561(95％CI 0.527-0.595),corresponding to the AUC value of the verification group was 0.674(95％CI 0.622-0.726).Conclusions The deep learning algorithm model based on fundus images has good diagnostic performance,and may be used as a new non-invasive,convenient and rapid screening method for MCI in CHD population.

Objective:This study aims to explore the application effect of anticipatory risk intervention combined with health education under LEARNS mode in elderly patients with chronic heart failure(CHF).Methods:This randomized controlled enrolled 126 elderly CHF patients admitted in Panzhihua Central Hospital between January 2022 and February 2023.They were divided into control group(n=63)and intervention group(n=63).All patients received routine nursing care,patients in control group received additional health education under LEARNS mode,compared to those in intervention group receiving additional anticipatory risk intervention based on control group,both groups were intervened for 2 months.Physiological indexes,negative emotion,quality of life,sleep quality,disease perception&control and self-efficacy,as well as incidence of adverse events,were compared between two groups.Results:Compared with patients in control group after intervention,those in intervention group had signif-icant lower systolic blood pressure(SBP)[(119.84±8.60)mmHg vs.(129.49±9.24)mmHg],diastolic blood pressure(DBP)[(81.59±5.08)mmHg vs.(88.51±6.36)mmHg],N terminal pro brain natriuretic peptide(NT-proBNP)[(2604.46±204.80)ng/L vs.(3024.87±212.27)ng/L],scores of Self-Rating Anxiety Scale(SAS)[(55.90±2.43)points vs.(60.11±2.62)points],Self-Rating Depression Scale(SDS)[(57.03±2.56)points vs.(61.54±2.66)points],Minnesota Living with Heart Failure Questionnaire(MLHFQ)[(52.05±6.32)points vs.(60.46±7.10)points]and Pittsburgh Sleep Quality Index(PSQI)[(9.00±1.65)points vs.(11.05±1.96)points],and significant higher left ventricular ejection fraction(LVEF)[(51.83±7.28)％vs.(47.57±5.98)％],scores of Control Attitude Scale-Revised(CAS-R)[(35.59±2.97)points vs.(30.60±3.52)points]and Gen-eral Self-Efficacy Scale(GSES)[(36.98±4.21)points vs.(30.52±4.14)points](P＜0.001 all).Incidence of adverse events in intervention group was significantly lower than that of control group(3.17％vs.12.70％,P=0.048).Conclusion:Anticipatory risk intervention combined with health education under the LEARNS model could effectively improve the physiological indexes,quality of life and sleep,enhance disease perception and self-effica-cy,and reduce negative emotion and incidence of adverse events in elderly CHF patients.

Objective:To explore the value of magnetic resonance examination in distinguishing invasive and non-invasive pancreatic solid pseudopapillary neoplasms (SPN).Methods:The clinical and MRI data of 167 patients with SPN who underwent surgery and were pathologically diagnosed at Zhongshan Hospital ,Fudan University from Oct 2013 to Oct 2023 were retrospectively analyzed.Results:There was no statistically significant difference between invasive and non-invasive SPN in terms of age, gender, clinical symptoms, laboratory tests, location, growth pattern, tumor size, relationship with the pancreas, bleeding, and pancreatic duct dilation ( P>0.05). However, there were statistically significant differences between the two groups in terms of tumor morphology, margins, capsule, cystic solid ratio, pancreatic atrophy, enhancement pattern, and enhancement features ( P<0.05). The area under the ROC curve for the combined indicators (tumor morphology, margins, capsule, cystic solid ratio, and pancreatic atrophy) was 0.679 (95% CI: 0.594-0.764), with a sensitivity of 73.7% and specificity of 70.9%. Conclusion:Magnetic resonance examination is helpful in distinguishing invasive and non-invasive pancreatic solid pseudopapillary neoplasms.

Body weight abnormalities, including overweight, obesity, and underweight, have become a dual public health challenge in Chinese adults: overweight and obesity lead to a variety of chronic complications, while underweight increases the risks of malnutrition, sarcopenia, and organ dysfunction. To systematically address these issues, multidisciplinary experts in endocrinology, sports science, nutrition, and psychiatry from various regions have held multiple weight management seminars. Based on the latest epidemiological data and clinical evidence, they expanded the guideline to include assessment and intervention strategies for underweight, in addition to the core content of obesity management. This guideline outlines the etiological mechanisms, evaluation methods, and multidimensional management strategies for overweight and obesity, covering key areas such as diagnosis and assessment, medical nutrition therapy, exercise prescription, pharmacological intervention, and psychological support. It is intended to provide a scientific and standardized approach to weight management across the adult population, aiming to curb the rising prevalence of obesity, mitigate complications associated with abnormal body weight, and improve nutritional status and overall quality of life.

Objective:To summarize the clinical and genetic characteristics of late-onset facioscapulohumeral muscular dystrophy type 1 (FSHD1) patients, and to compare the differences between late-onset and classic-onset FSHD1 patients.Methods:A retrospective analysis was conducted on the clinical and genetic data of genetically confirmed late-onset FSHD1 patients (age at onset30 years) between January 2007 and June 2024 from the Department of Neurology of Peking University First Hospital and the First Affiliated Hospital of Fujian Medical University. Classic-onset FSHD1 patients (10 yearsage at onset≤30 years) were matched 1∶1 according to sex and disease duration for comparison. The demographic information, the number of D4Z4 repeat units, the distal D4Z4 methylation levels, FSHD Clinical Score (CS), Clinical Severity Score (CSS), and Age-Corrected Clinical Severity Score (ACSS) of these patients were collected. Survival analysis was performed to compare the outcome of lower extremity involvement between late-onset and classic-onset FSHD1 patients. The correlation of the number of D4Z4 repeat units and D4Z4 methylation level with CS and ACSS was analyzed in late-onset FSHD1 patients.Results:A total of 61 patients with late-onset FSHD1 were enrolled, 33 (54.1%) of whom are female, with an age of 54.0 (46.0, 62.0) years and a disease duration of 14.0 (5.5, 22.5) years. Compared to classic-onset FSHD1 patients, late-onset patients exhibited significantly lower CS [7.0 (5.6, 8.4) vs 6.0 (4.4, 7.7), U=1 416.000, P=0.013], CSS [3.0 (2.8, 3.3) vs 3.0 (2.0, 4.0), U=2 352.000, P=0.010], and ACSS [189.2 (137.1, 241.3) vs 96.8 (61.3, 132.2), U=3 225.500, P0.001], and higher proportion of patients with limb girdle involvement but no facial muscle involvement [18.0% (11/61) vs 6.6% (4/61), χ2=3.725, P=0.054]. Kaplan-Meier survival analysis showed that the onset age of lower extremity involvement in late-onset patients (45 years, 95% CI 42-48 years) was significantly higher than that in classic-onset patients (24 years, 95% CI 21-27 years, χ2=61.012, P0.001). The duration from symptom onset to lower extremity involvement in late-onset patients (15 years, 95% CI 10-20 years) was significantly longer than that in classic-onset patients (8 years, 95% CI 3-13 years, χ2=9.105, P=0.003). Late-onset FSHD1 patients carried higher average distal D4Z4 methylation levels compared to those with classic-onset FSHD1 [46.68% (40.79%,52.57%) vs 41.02% (34.03%,48.00%), U=1 378.500, P=0.014]. Among late-onset FSHD1 patients, cytosine-phosphate-guanine 6 (CpG6) methylation levels were significantly negatively correlated with ACSS ( r=-0.278, P=0.025); the number of D4Z4 repeat units were significantly negatively correlated with ACSS ( r=-0.272, P=0.034);CpG6 methylation levels were significantly negatively correlated with CS ( r=-0.441, P=0.003), while no correlation was found between number of D4Z4 repeat units and CS ( r=-0.161, P=0.310). Conclusions:Compared with classic-onset FSHD1 patients, late-onset FSHD1 patients are associated with a higher degree of distal D4Z4 methylation, along with a milder muscle weakness phenotype, slower disease progression and a higher proportion of cases without facial muscle involvement. The age at onset can be used as a marker of the severity and prognosis in FSHD1.

Rheumatoid arthritis (RA) is a chronic autoimmune disease characterized by synovial inflammation, joint destruction, and functional impairment. Angiogenesis plays a key role in the pathological progression of RA with dysfunction of endothelial cells to promote synovial inflammation, sustain pannus formation, subsequently leading to joint damage. Colquhounia Root Tablets (CRT), a Chinese patent drug, has shown a satisfying clinical efficacy in treating RA, while the underlying mechanism by which CRT inhibits RA-associated angiogenesis remains unclear. In this study, we applied a research approach combining transcriptomic data analysis, bio-network mapping, and in vivo and in vitro experiments to explore the molecular mechanisms of CRT in suppressing angiogenesis in RA. Animal welfare and experimental procedures follow the regulations of the Animal Ethics Committee of Institute of Basic Theory for Chinese Medicine, China Academy of Chinese Medical Sciences (ratification number: IBTCMCACMS21-2307-06). Network analysis identified that key genes such as nucleotide-binding oligomerization domain-containing protein 2 (NOD2), SMAD family member 3 (SMAD3), and vascular endothelial growth factor A (VEGFA) significantly enriched in pathways related to NOD-like receptor signaling and VEGF signaling, indicating that CRT may inhibit angiogenesis by regulating vascular endothelial cell function with modulating angiogenesis-related pathways. In vivo data showed that CRT significantly reduced the positive expression of CD31 and VEGF in the ankle joint of adjuvant-induced arthritis (AIA) rats. In vitro data further confirmed that CRT effectively inhibited VEGF-induced migration, invasion, and tube formation in HUVECs, while significantly reduced the expression of angiogenesis-related factors VEGF/CD31/Ang-1, as well as the positive expression of VEGF and CD31 in HUVECs. Furthermore, CRT markedly decreased the protein expression of NOD2, VEGFA, and SMAD3. In conclusion, these findings indicate that CRT may inhibit the RA-related angiogenesis by targeting the NOD2/SMAD3/VEGF signaling axis to improve endothelial cell function, enriching the scientific connotation of CRT in inhibiting pathological angiogenesis in RA and also offer new insights for clinical prevention and treatment of RA.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.