BACKGROUND:In the initial stage of growth plate injury inflammation,platelet-derived growth factor BB promotes the repair of growth plate injury by promoting mesenchymal progenitor cell infiltration,chondrogenesis,osteogenic response,and regulating bone remodeling. OBJECTIVE:To elucidate the action mechanism of platelet-derived growth factor BB after growth plate injury. METHODS:PubMed,VIP,WanFang,and CNKI databases were used as the literature sources.The search terms were"growth plate injury,bone bridge,platelet-derived growth factor BB,repair"in English and Chinese.Finally,66 articles were screened for this review. RESULTS AND CONCLUSION:Growth plate injury experienced early inflammation,vascular reconstruction,fibroossification,structural remodeling and other pathological processes,accompanied by the crosstalk of chondrocytes,vascular endothelial cells,stem cells,osteoblasts,osteoclasts and other cells.Platelet-derived growth factor BB,as an important factor in the early inflammatory response of injury,regulates the injury repair process by mediating a variety of cellular inflammatory responses.Targeting the inflammatory stimulation mediated by platelet-derived growth factor BB may delay the bone bridge formation process by improving the functional activities of osteoclasts,osteoblasts,and chondrocytes,so as to achieve the injury repair of growth plate.Platelet-derived growth factor BB plays an important role in angiogenesis and bone repair tissue formation at the injured site of growth plate and intrachondral bone lengthening function of uninjured growth plate.Inhibition of the coupling effect between angiogenesis initiated by platelet-derived growth factor BB and intrachondral bone formation may achieve the repair of growth plate injury.

ObjectiveTo learn the density and seasonal variation of adult mosquitoes in Pudong New Area of Shanghai, and to explore the influence of meteorological factors on the density of adult mosquitoes. MethodsFrom April to November in 2017‒2021, adult mosquito density in Pudong New Area was monitored every ten days a time by using CO₂ trapping light method. Meteorological data were collected during the same time, and Pearson correlation analysis and multiple linear regression model were used to investigate the correlation between adult mosquito density and meteorological factors. ResultsThe seasonal variation of adult mosquito density showed a single-peak pattern, with the peak of 7.09 mosquitoes·(set·time)^-1 in July. The adult mosquito density was positively correlated with the monthly average temperature, monthly maximum temperature, monthly minimum temperature, and monthly average relative humidity (r=0.813, 0.793, 0.820, 0.617, all P<0.05), but negatively correlated with monthly average air pressure (r=-0.738, P<0.05). The regression equation of the adult mosquito density and monthly minimum temperature in Pudong New Area of Shanghai was Y=0.066 X₃-0.884, with a corrected R² of 0.673, indicating a good model fitting. ConclusionThe overall seasonal variation of adult mosquito density in Pudong New Area showed a single-peak pattern. The density of adult mosquitoes was correlated with the monthly average temperature, monthly maximum temperature, monthly minimum temperature, monthly average relative humidity, and monthly average air pressure, and linearly correlated with monthly minimum temperature.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Objective To investigate the current level of public awareness regarding nuclear emergency evacuation around a nuclear power plant, analyze the influencing factors, and propose suggestions and countermeasures based on the results. Methods In July 2024, according to the survey protocol and questionnaire developed by the National Institute for Radiological Protection, Chinese Center for Disease Control and Prevention, a field-based centralized online questionnaire was administered. A total of 854 residents living near the nuclear power plant were included as survey participants. An analysis of variance was used to compare the impact of different factors on the public knowledge of nuclear radiation and awareness of nuclear emergency evacuation, while the chi-square test was employed to compare differences between groups. Results A total of 854 questionnaires were collected in this study. The survey revealed that the levels of public knowledge about nuclear radiation and awareness of nuclear emergency evacuation around the power plant were relatively low, with average objective awareness rates of 51% and 47%, respectively. In terms of age, the 30-45 years old group had the highest average score, while the group aged 60 and above had the lowest. Regarding education level, the group with primary school education or below had the lowest average score, whereas those with junior college or undergraduate education scored the highest. The internet (73.7%) was the primary source of emergency information for the public, followed by television (61.7%). The majority of the public (85.0%) expressed trust in the government during evacuation and were willing to follow governmental evacuation arrangements. The main reason for this willingness was the belief that the government could provide sufficient emergency supplies. Conclusion The surveyed population exhibited low levels of knowledge regarding nuclear radiation and awareness of nuclear emergency evacuation, with generally low awareness rates. Awareness levels were influenced by factors such as sex, age, educational background, and distance from the nuclear power plant. To enhance public awareness, it is necessary to strengthen science communication related to nuclear radiation and public protective actions in nuclear emergencies. Targeted dissemination strategies with high communication effectiveness, accessibility, and public acceptance should be adopted to gradually enhance public awareness of nuclear radiation and nuclear emergency protective actions.

Abstract: To explore the molecular mechanism by which long non-coding RNA Surfactant Associated 1 Pseudogene(SFTA1P) promotes the proliferation and migration of clear cell renal cell carcinoma(ccRCC) cells by regulating the microRNA-182-5p(miR-182-5p)/fibronectin 1(FN1) pathway. Methods: GEPIA2 software was utilized to analyze the expression ofSFTA1Pin ccRCC tissues from the TCGA database. Quantitative real-time PCR(qPCR) was employed to detect the expression ofSFTA1Pin ccRCC tissues, normal kidney tissues and ccRCC cell lines. A subcellular localization experiment was performed to explore the localization ofSFTA1Pwithin the human renal cell adenocarcinoma cell line(ACHN) derived from ccRCC. ACHN cells were then divided into the following groups: si-Con group, si-SFTA1P #2 group, mimic NC group, miR-182-5p mimic group, anti-miR-Con group, anti-miR-182-5p group, anti-miR-182-5p+si-FN1 group, si-Con+anti-miR-Con group, si-SFTA1P #2+anti-miR-Con group, and si-SFTA1P #2+anti-miR-182-5p group. CCK-8 and Transwell chamber experiments were conducted to assess cell proliferation and migration abilities. qPCR, Western blot, and dual-luciferase reporter assays were employed to elucidate the regulatory interactions amongSFTA1P,miR-182-5p, andFN1. Results: Analysis of The Cancer Genome Atlas(TCGA) database indicated thatSFTA1Pwas overexpressed in ccRCC tissues(P<0.05). When compared to normal kidney tissues,SFTA1Pexpression was markedly elevated in ccRCC tissues(P<0.01). Furthermore, the expression levels ofSFTA1Pin ccRCC cell lines 786-O, SN12-PM6, ACHN, and A498 were significantly higher than those in human renal proximal tubule cells(HK-2)(allP<0.01). Subcellular localization experiments revealed thatSFTA1Ppredominantly localized in the cytoplasm of ACHN cells. Compared to the si-Con group, the si-SFTA1P #2 group exhibited a significant reduction in proliferation and migration abilities of ACHN cells, accompanied by a decrease inFN1mRNA and protein expression(P<0.05). Compared to the mimic NC group, the expression ofFN1mRNA and protein in ACHN cells in the miR-182-5p mimic group reduced(P<0.01). In comparison to the anti-miR-Con group, the expression levels ofFN1mRNA and protein in ACHN cells were significantly elevated in the anti-miR-182-5p group. Additionally, there was a significant enhancement in both cell proliferation and migration capabilities(P<0.05). Conversely, the proliferation and migration abilities of ACHN cells in the anti-miR-182-5p+si-FN1 group were significantly reduced compared to the anti-miR-182-5p group(P<0.05). Furthermore, relative to the si-SFTA1P #2+anti-miR-Con group, the ACHN cells in the si-SFTA1P #2+anti-miR-182-5p group demonstrated increased proliferation and migration abilities, along with elevatedFN1mRNA and protein expression levels(P<0.05). Conclusion SFTA1Pexhibits elevated expression levels in ccRCC and facilitates the proliferation and migration of ccRCC cells through the modulation of themiR-182-5p/FN1signaling pathway.

ObjectiveTo explore the clinical efficacy and safety of Da Chaihutang （DCH） for the treatment of sepsis with Yang syndrome. MethodsA total of 70 patients suffering from sepsis with Yang syndrome were randomly divided into an observation group and a control group， with 35 cases in each group. They both received standard Western medicine treatment. The observation group was additionally given a dose of DCH， which was boiled into 100 mL and taken twice. The control group was additionally given an equal volume and dosage of warm water. The intervention lasted for three days. The 28-day all-cause mortality and the changes in the following indicators before and after intervention were compared between the two groups， including sequential organ failure assessment （SOFA）， acute physiology and chronic health evaluation Ⅱ （APACHE Ⅱ） score，white blood cell （WBC），the percentage of neutrophils （NEU%），C-reactive protein （CRP），procalcitonin （PCT），alanine transaminase （ALT），aspartate transaminase （AST），total bilirubin （TBil），creatinine （Cr），blood urea nitrogen （BUN），acute gastrointestinal injury （AGI） grade，gastrointestinal dysfunction score （GDS），serum intestinal fatty acid-binding protein （iFABP）， citrulline （CR），platelet （PLT），prothrombin time（PT），activated partial thromboplastin time （APTT），fibrinogen （Fib），international normalized ratio （INR），and D-dimer （D-D）. ResultsThere was no significant difference between the two groups regarding 28-day all-cause mortality. After the intervention，SOFA，WBC，PCT，and Cr were significantly decreased， and PLT was significantly increased in the control group （P<0.05）. SOFA，APACHE Ⅱ，NEU%，CRP，PCT，ALT，AST，Cr，BUN，AGI grade，GDS，and serum iFABP and CR were significantly improved in the observation group （P<0.05）. After the intervention，APACHE Ⅱ，PCT，AGI grade，GDS，and serum iFABP in the observation group were significantly lower than those in the control group ，while CR and PLT were higher （P<0.05，P<0.01）. There were significant differences regarding the gap of SOFA，APACHE Ⅱ，AST，TBil，AGI grade，GDS，iFABP，CR， and PLT between the two groups （P<0.05，P<0.01）. There were slight differences regarding PT，APTT，Fib，INR，and D-D between the two groups，which were in the clinical normal range. ConclusionOn the basis of Western medicine， DCH helped to reduce sepsis severity and improved multiple organ dysfunction with high clinical efficacy and safety， but further research on its impact on the prognosis of patients with sepsis is still required.

OBJECTIVE To prepare reactive oxygen species （ROS）-responsive methotrexate （MTX）-modified paclitaxel （PTX）/icariin （ICA） micelles （MTX-oxi-Ms@PTX/ICA）， and perform technology optimization and in vitro anti-tumor effect evaluation. METHODS Synergistic toxicity concentration range of PTX and ICA was screened by synergistic toxicity test. The micelles were prepared by thin film hydration method， and their technology was optimized by response surface methodology. The fundamental characteristics of the micelles prepared by the optimal technology were evaluated. The micelles’ cytotoxicity， targeting ability to renal carcinoma RENCA cells of mice， and their inhibitory effects on invasion and migration were assessed. RESULTS Results of synergistic toxicity experiments demonstrated that the strongest synergistic effect occurred when PTX concentrations ranged from 2.5 to 10 μmol/L and ICA concentrations ranged from 5 to 15 μmol/L. The optimal technology of MTX-oxi-Ms@PTX/ ICA was determined to include 80 mg Soluplus®， Soluplus® and TPGS1000 mass ratio of 4∶1 （mg/mg）， 2 mg DSPE-PEG2000-TK- PEG5000， 2 mg DSPE-PEG2000-MTX， 1 mg PTX， and 1.5 mg ICA， with a hydration temperature of 35 ℃ and a formulation volume of 5 mL. Under the optimal conditions， average encapsulation efficiency of PTX and ICA in 3 batches of MTX-oxi- Ms@PTX/ICA reached 92.75%， the critical micelle concentration （CMC） was 0.007 9 mg/mL， the particle size was （62.09±1.68） nm， the polydispersity index （PDI） was 0.046±0.032， and the Zeta potential was （－2.47±0.15） mV. Within 30 days of placement， there was no significant change E-mail：yingqiang_1126@163.com in particle size and polydispersity index of micelle. In vitro release experiments showed that MTX-oxi-Ms@PTX/ICA released drugs more rapidly in oxidative environments. The half maximal inhibitory concentration of MTX-oxi-Ms@PTX/ICA against RENCA cells was （5.170±0.036） μmol/L. In vitro cellular uptake experiments indicated that compared with unmodified micelles， MTX modified micelles had stronger targeting effects on cancer cells， and also significantly enhanced the inhibitory ability of invasion and migration of RENCA cells （P＜0.05）. CONCLUSIONS MTX-oxi-Ms@PTX/ICA micelles are successfully prepared， which exhibit high encapsulation efficiency， low critical micelle concentration， and good stability. These micelles demonstrate significant cytotoxicity against RENCA cells and effectively inhibit cancer cell invasion and migration.