Colorectal cancer(CRC) is a common malignant tumor worldwide. Due to the treatment intolerance and side effects, CRC rank the top among various cancers regarding the incidence and mortality rates. Therefore, exploring new therapies is of great significance for the treatment of CRC. Aerobic glycolysis(AEG) plays an important role in the microenvironment formation, proliferation, metastasis, and recurrence of CRC and other tumor cells. It has been confirmed that intervening in the AEG pathway can effectively curb CRC. The active ingredients and compound prescriptions of traditional Chinese medicine(TCM) can effectively inhibit the proliferation, metastasis, and drug resistance and regulate the apoptosis of tumor cells by modulating AEG-associated transport proteins [eg, glucose transporters(GLUT)], key enzymes [hexokinase(HK) and phosphofructokinase(PFK)], key genes [hypoxia-inducible factor 1(HIF-1) and oncogene(c-Myc)], and signaling pathways(MET/PI3K/Akt/mTOR). Accordingly, they can treat CRC, reduce the recurrence, and improve the prognosis of CRC. Although AEG plays a key role in the development and progression of CRC, the specific mechanisms are not yet fully understood. Therefore, this article delves into the intrinsic connection of the targets and mechanisms of the AEG pathway with CRC from the perspective of tumor cell glycolysis and explores how active ingredients(oxymatrine, kaempferol, and dioscin) and compound prescriptions(Quxie Capsules, Jiedu Sangen Decoction, and Xianlian Jiedu Prescription) of TCM treat CRC by intervening in the AEG pathway. Additionally, this article explores the shortcomings in the current research, aiming to provide reliable targets and a theoretical basis for treating CRC with TCM.
Humans ; Colorectal Neoplasms/genetics* ; Drugs, Chinese Herbal/therapeutic use* ; Glycolysis/drug effects* ; Animals ; Medicine, Chinese Traditional ; Signal Transduction/drug effects*

PURPOSE: Lateral patellar compression syndrome (LPCS) is characterized by a persistent abnormally high stress exerted on the lateral articular surface of the patella due to lateral patellar tilt without dislocation and lateral retinaculum contracture, leading to anterior knee pain. The purpose of this study is to evaluate the efficacy and prognosis of lateral retinaculum release (LRR) combined with chondroplasty in the treatment of LPCS. METHODS: This retrospective study evaluated 40 patients who underwent LRR combined with chondroplasty for LPCS between 2020 and 2021. The assessment included improvement in postoperative tenderness and knee joint function. Patients were evaluated using the Lysholm, Tegner, and International Knee Documentation Committee 2000 scoring systems, as well as the visual analog scale, both preoperatively and postoperatively, with the paired comparisons analyzed using a t-test. Additionally, intraoperative observations were made regarding knee joint lesions, including cartilage damage and osteophyte formation, with analysis by the Chi-square test. RESULTS: The visual analog scale score for tenderness showed a significant decrease after surgery (p < 0.001). Evaluation of knee joint function also indicated significant improvements, as demonstrated by increased Lysholm, Tegner, and International Knee Documentation Committee 2000 scores postoperatively (p < 0.001, p = 0.011, p < 0.001, respectively). Furthermore, all LPCS patients included in the study presented with cartilage injuries and osteophyte formation. Significant differences were noted in the incidence of cartilage damage and osteophyte formation at different locations within the knee among patients with LPCS. CONCLUSION LRR combined with chondroplasty is an effective surgical approach for treating patients with LPCS, with satisfactory recovery observed at the 1-year follow-up. Additionally, the incidence of cartilage damage and osteophyte formation in LPCS patients varies significantly depending on the specific location within the knee joint.
Humans ; Male ; Female ; Retrospective Studies ; Adult ; Middle Aged ; Patella/surgery* ; Knee Joint/physiopathology* ; Recovery of Function ; Young Adult ; Treatment Outcome ; Cartilage, Articular/surgery* ; Adolescent

BACKGROUND: Blood glucose and serum albumin have been associated with cardiovascular disease prognosis, but the impact of admission-blood-glucose-to-albumin ratio (AAR) on adverse outcomes in critical ill coronary artery disease (CAD) patients was not investigated. METHODS: Patients diagnosed with CAD were non-consecutively selected from the MIMIC-IV database and categorized into quartiles based on their AAR. The primary outcome was 1-year mortality, and secondary endpoints were in-hospital mortality, acute kidney injury (AKI), and renal replacement therapy (RRT). A restricted cubic splines model and Cox proportional hazard models assessed the association between AAR and adverse outcomes in CAD patients. Kaplan-Meier survival analysis determined differences in endpoints across subgroups. RESULTS: A total of 8360 patients were included. There were 726 patients (8.7%) died in the hospital and 1944 patients (23%) died at 1 year. The incidence of AKI and RRT was 63% and 4.3%, respectively. High AAR was markedly associated with in-hospital mortality (HR = 1.587, P = 0.003), 1-year mortality (HR = 1.502, P < 0.001), AKI incidence (HR = 1.579, P < 0.001), and RRT (HR = 1.640, P < 0.016) in CAD patients in the completely adjusted Cox proportional hazard model. Kaplan-Meier survival analysis noted substantial differences in all endpoints based on AAR quartiles. Stratified analysis and interaction test demonstrated stable correlations between AAR and outcomes. CONCLUSIONS The results highlight that AAR may be a potential indicator for assessing in-hospital mortality, 1-year mortality, and adverse renal prognosis in critical CAD patients.

Objective To explore the effects of dodecanoylcarnitine(DA)and myristoleic acid(MA)on the function of mouse alveolar epithelial cell line MLE-12 and their underlying mechanisms.Methods An inflammatory model was established by stimulating MLE-12 cells with IL-4.The expression levels of DA,MA,and sphingosine-1-phosphate(S1P)in the cell supernatant were detected by ELISA.MLE-12 cells were separately intervened with DA and MA.RT-PCR and flow cytometry were used to detect the expression changes of inflammatory factors IL-6 and tumor necrosis factor-α(TNF-α)and the level of intracellular reactive oxygen species(ROS).Additionally,Western blot was performed to detect the expression of key proteins such as p38 mitogen-activated protein kinase(p-38 MAPK)and src homology 2 domain-containing phosphatase 1(SHP-1).To explore the role of S1PR2 in the effects of DA and MA,MLE-12 cells were pretreated with the S1PR2 inhibitor JTE-013,and the above experiments were repeated.Results IL-4 stimulation significantly upregulated the levels of DA,MA,and S1P in MLE-12 cells(P<0.05).DA/MA treatment groups exhibited significantly increased expression of IL-6 and TNF-α compared with the control group(P<0.05),along with elevated ROS levels(P<0.05).Western blot analysis revealed that DA/MA promoted SHP-1 dephosphorylation and phosphorylated p38 MAPK activation in MLE-12 cells.Notably,JTE-013 pre-treatment completely reversed these effects(P<0.05).Conclusion Asthma-related metabolites DA and MA exacerbate the inflammatory and oxidative stress responses of MLE-12 cells by activating the S1PR2 receptor,promoting the dephosphorylation of SHP-1 and the activation of the p-p38 MAPK pathway.This study reveals the core regulatory role of S1PR2 in this pathway as well.

Objective:The aims of this study were to compare the clinical effectiveness of an immunosuppressant(sintilimab)combined with different chemotherapy regimens(two-and three-drug regimens)in the neoadjuvant treatment of advanced gastric cancer and to explore the efficacy-associated clinical features.Methods:A retrospective analysis was conducted on patients with advanced gastric cancer who re-ceived treatment at Lanzhou University Second Hospital between August 2020 and February 2024.Overall,133 patients were included in the study and assigned into groups A(three-drug regimens)and B(two-drug regimens),according to the treatment regimen received.Recent ef-ficacy outcomes,including the pathological complete response rate(pCR),major pathological response rate(MPR),objective response rate(ORR),and disease control rate(DCR),as well as long-term efficacy outcomes,including overall survival(OS)and disease-free survival(DFS),were compared.Subgroup analyses were performed to identify clinical features associated with treatment efficacy.Results:The recent effic-acy outcomes were similar between groups A(two-drug regimen)and B(three-drug regimen),with pCRs of 18.46%and 27.94%,MPRs of 52.31%and 58.82%,ORRs of 76.92%and 76.47%,and DCRs of 87.69%and 95.59%,respectively.However,the three-drug regimen led to significantly improved OS and DFS,compared with the two-drug regimen(P<0.05).Subgroup analysis revealed that male patients and those with gastric antrum cancer,an ECOG score of 0,a T4 stage tumor,and no vascular or nerve invasion benefited more from the three-drug re-gimen.Conclusions:Sintilimab combined with the three-drug chemotherapy regimen demonstrated superior long-term efficacy in the neo-adjuvant treatment of advanced gastric cancer,compared with the combination with the two-drug regimen.Certain clinical features may predict greater benefit from the three-drug regimen.

Inflammatory diseases (IDs) are a general term of diseases characterized by chronic inflammation as the primary pathogenetic mechanism, which seriously affect the quality of patient′s life and cause significant social and medical burden. Current drugs for IDs include nonsteroidal anti-inflammatory drugs, corticosteroids, immunomodulators, biologics, and antioxidants, but these drugs may cause gastrointestinal side effects, induce or worsen infections, and cause non-response or intolerance. Given the outstanding performance of metal polyphenol network (MPN) in the fields of drug delivery, biomedical imaging, and catalytic therapy, its application in the diagnosis and treatment of IDs has attracted much attention and significant progress has been made. In this paper, we first provide an overview of the types of IDs and their generating mechanisms, then sort out and summarize the different forms of MPN in recent years, and finally discuss in detail the characteristics of MPN and their latest research progress in the diagnosis and treatment of IDs. This research may provide useful references for scientific research and clinical practice in the related fields.

OBJECTIVE: Poxviruses are zoonotic pathogens that infect humans, mammals, vertebrates, and arthropods. However, the specific role of ticks in transmission and evolution of these viruses remains unclear. METHODS: Transcriptomic and metatranscriptomic raw data from 329 sampling pools of seven tick species across five continents were mined to assess the diversity and abundance of poxviruses. Chordopoxviral sequences were assembled and subjected to phylogenetic analysis to trace the origins of the unblasted fragments within these sequences. RESULTS: Fifty-eight poxvirus species, representing two subfamilies and 20 genera, were identified, with 212 poxviral sequences assembled. A substantial proportion of AT-rich fragments were detected in the assembled poxviral genomes. These genomic sequences contained fragments originating from rodents, archaea, and arthropods. CONCLUSION Our findings indicate that ticks play a significant role in the transmission and evolution of poxviruses. These viruses demonstrate the capacity to modulate virulence and adaptability through horizontal gene transfer, gene recombination, and gene mutations, thereby promoting co-existence and co-evolution with their hosts. This study advances understanding of the ecological dynamics of poxvirus transmission and evolution and highlights the potential role of ticks as vectors and vessels in these processes.
Animals ; Poxviridae/physiology* ; Ticks/virology* ; Phylogeny ; Transcriptome ; Evolution, Molecular ; Poxviridae Infections/virology* ; Genome, Viral

Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Objective:To evaluate the therapeutic role of balanced matching concept in the surgical release of moderate and severe elbow stiffness after trauma.Methods:A retrospective study was conducted to analyze the clinical data of 20 patients who had been treated by surgical release from June 2022 to January 2024 for elbow stiffness after moderate and severe trauma at Department of Orthopedic Trauma, The First Hospital Affiliated to Air Force Medical University of PLA using the balanced matching concept (combination of elbow soft tissue balance and bone matching). There were 15 males and 5 females, with an age of (33.0±8.9) years. Six left sides and 14 right sides were affected. The elbow stiffness was severe in 13 cases and moderate in 7 cases. Six patients had mainly bony stiffness, 4 patients mainly soft stiffness, and 10 patients mixed stiffness. The elbow flexion and extension, Mayo elbow performance score (MEPS) and disabilities of the arm, shoulder, and hand (DASH) score were recorded and compared before release and at the last follow-up. The recurrence of ectopic ossification, infection, iatrogenic fracture and other complications of the elbow joint of the affected limb were recorded.Results:All the 20 patients were followed up for (16.6±3.5) months. At the last follow-up, the elbow flexion and extension (121.8°±8.9° and 14.8°±8.2°) were significantly greater than those before operation (73.5°±25.7° and 47.3°±19.2°), and the MEPS and DASH scores [ (90.0±5.6) points, (5.6±3.0) points] were significantly better than those before operation [(53.0±12.8) points, (62.1±14.0) points] ( P<0.05). Iatrogenic fracture of the ulna occurred in 1 patient, and pinky numbness occurred in 1 patient after surgery. None of the patients had recurrence of ectopic ossification or wound infection. Conclusion:In the surgical release of moderate and severe elbow stiffness after trauma, the concept of balanced matching plays a positive role by facilitating the functional restoration of the elbow and reducing the incidence of complications.

Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.