BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

Background: Adrenocortical hormones, particularly 11-oxygenated androgens, are pivotal in female reproductive health and fertility. Standardized detection kits and population-specific reference intervals are lacking in China, hindering related clinical applications. Methods: A HPLC-tandem mass spectrometry (HPLC-MS/MS) pipeline was developed, rigorously validated, and applied to simultaneously quantify corticosterone, cortisone, cortisol, 18-OH cortisol, androstenedione (A4), 11β-hydroxyandrostenedione (11-OH A4), dehydroepiandrosterone, and dehydroepiandrosterone sulfate in serum samples from 455 reproductive-aged women (18–45 yrs) in Guangxi, China. Age-dependent concentration trends were analyzed, and reference intervals stratified by age (2.5th to 97.5th percentiles) were established. Correlations with body-composition metrics, ethnicity, and the menstrual cycle were investigated. Results: The HPLC-MS/MS method demonstrated high precision (intra- and inter-assay CVs < 15%), accuracy, and sensitivity. All eight hormones exhibited significant age-related declines (P < 0.001 for seven hormones; P = 0.001 for 11-OH A4). Notably, 11-OH A4 levels were significantly lower in the 35–45-yr (3.05 nmol/L) and 25–34-yr (3.09 nmol/L) age groups than in the 18–24-yr (3.57 nmol/L) age group, whereas no significant difference was observed between the 35–45-yr and 25–34-yr age groups. Weak negative correlations were observed between the body mass index and corticosterone and cortisone levels, whereas ethnicity and the menstrual cycle showed no significant associations with hormone levels. Conclusions We developed an HPLC-MS/MS-based method for simultaneously quantifying eight adrenocortical hormones, including 11-OH A4, and defined age-specific reference intervals for reproductive-aged Chinese women. These findings advance the clinical utility of adrenocortical hormones in diagnosing and managing reproductive disorders.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

Background: and Purpose Therapeutic target selection in noninvasive brain stimulation for poststroke motor recovery typically relies on the interhemispheric inhibition model, which is effective for mildly affected patients but offers limited benefits for severely affected individuals. The mechanisms governing recovery from moderate-to-severe stroke remain poorly understood, which hinders the development of targeted interventions. Methods: We analyzed resting-state functional magnetic resonance imaging data from patients with unilateral subcortical stroke and moderate-to-severe upper limb deficits, both pre- and postintervention, along with data from healthy controls. We developed a novel dynamic lag analysis method for identifying recovery-related homotopic sensorimotor regions with altered interhemispheric interactions. To further uncover the global reorganization pathway, we developed dynamic lateralization approaches to detect large-scale functional connectivity (FC) alterations associated with the identified regions in transient lateralization states. Results: Dynamic time-lag analysis revealed significantly reduced synchronized states in the homotopic dorsal premotor cortex (PMd) post-intervention compared with pre-intervention, which correlated with motor recovery. Further dynamic lateralization analysis revealed a prolonged segregation state in patients, characterized by weakened interhemispheric and strengthened intrahemispheric interactions. In this state, patients showed decreased FC in the ipsilesional PMd and increased FC in the contralesional PMd with bilateral subcortical networks. These recoveryrelated alterations were absent in the traditional static analysis. Conclusions Dynamic analyses targeting interhemispheric interactions are valuable for understanding neural reorganization after stroke. The diminished interactions between the homotopic PMd indicate a compensatory mechanism. Importantly, a state-dependent compensatory pathway was identified, wherein the contralesional PMd assumes the functions of the ipsilesional PMd through enhanced interactions with subcortical structures, potentially guiding more effective interventions.

Objective: To assess parental expectations for the development of children with autism spectrum disorder (ASD) and identify factors associated with these expectations, so as to provide references for improving rehabilitation outcomes and long term development in children with ASD. Methods: From June 2024 to January 2026, a total of 877 children with ASD and their parents were recruited from 27 rehabilitation institutions in Hefei. The children had been diagnosed by chief physicians at tertiary level hospitals. Demographic characteristics and data on parental expectations were collected by the Parental Expectations Questionnaire. Differences in parental expectations between groups were assessed using the Mann-Whitney U- test and Kruskal-Wallis H-test, and associated factors were examined using quantile regression. Results: The mean item score for overall parental expectations among parents of children with ASD was (4.55±0.47), and scores for all dimensions were higher than those among parents of typically developing children ( t =11.11-31.14, all P <0.01). Child age, school enrollment, and maternal personality were associated with daily living expectation scores, learning and special talents and strengths expectation scores, and special talents and strengths expectation scores, respectively ( H =6.16-8.18, all P <0.05). Parents of preterm children had higher expectations for social interaction, physical and mental well being, and daily living than parents of non-preterm children ( Z =-2.56, -2.48, -2.39, all P <0.05). Multivariate quantile regression analysis showed that children’s age was associated with the expected level of self care ability; school enrollment status was associated with the expected level of learning and specialty strengths; maternal personality was associated with the expected levels of social competence, physical and mental health, self care ability, and specialty strengths; parental age was associated with the expected levels of physical and mental health and specialty strengths; and parental educational attainment was associated with the expected level of self care ability ( β =-0.36-0.41, all P <0.05). Conclusion Parents of children with ASD in Hefei generally have high expectations for their children s development across the domains of learning, daily living, social interaction, and physical and mental well being.

Objective To introduce an innovative technique, the "balance-shaped sternal elevation device" and its application in the subxiphoid uniportal video-assisted thoracoscopic surgery (VATS) for anterior mediastinal masses resection. Methods Patients who underwent single-port thoracoscopic assisted anterior mediastinal tumor resection through the xiphoid process at the Department of Thoracic Surgery, West China Hospital, Sichuan University from May to June 2024 were included, and their clinical data were analyzed. Results A total of 7 patients were included, with 3 males and 4 females, aged 28-72 years. The diameter of the tumor was 1.9-17.0 cm. The operation time was 62-308 min, intraoperative blood loss was 5-100 mL, postoperative chest drainage tube retention time was 0-9 days, pain score on the 7th day after surgery was 0-2 points, and postoperative hospital stay was 3-12 days. All patients underwent successful and complete resection of the masses and thymus, with favorable postoperative recovery. Conclusion The "balance-shaped sternal elevation device" effectively expands the retrosternal space, providing surgeons with satisfactory surgical views and operating space. This technique significantly enhances the efficacy and safety of minimally invasive surgery for anterior mediastinal masses, reduces trauma and postoperative pain, and accelerates patient recovery, demonstrating important clinical significance and application value.

Inflammatory diseases (IDs) are a general term of diseases characterized by chronic inflammation as the primary pathogenetic mechanism, which seriously affect the quality of patient′s life and cause significant social and medical burden. Current drugs for IDs include nonsteroidal anti-inflammatory drugs, corticosteroids, immunomodulators, biologics, and antioxidants, but these drugs may cause gastrointestinal side effects, induce or worsen infections, and cause non-response or intolerance. Given the outstanding performance of metal polyphenol network (MPN) in the fields of drug delivery, biomedical imaging, and catalytic therapy, its application in the diagnosis and treatment of IDs has attracted much attention and significant progress has been made. In this paper, we first provide an overview of the types of IDs and their generating mechanisms, then sort out and summarize the different forms of MPN in recent years, and finally discuss in detail the characteristics of MPN and their latest research progress in the diagnosis and treatment of IDs. This research may provide useful references for scientific research and clinical practice in the related fields.

ObjectiveTo investigate the infestation of bedbugs in a staff dormitory in Jiading District, Shanghai, to explore the measures to dispose Cimex lectularius linnaeus, so as to provide a scientific basis for the prevention and control of bedbugs. MethodsThe infestation of bedbugs in the dormitory of the company was determined through field investigation, accompanied by scientific guidance under the comprehensive control measures and an effect evaluation of the control results. ResultsA total of 114 rooms distributed in 3 dormitory buildings were investigated, with an average infestation rate of 42.11%, of which building B has the highest infestation rate of 51.52%. Six bedbug specimens were collected by visual inspection in the room, and all of them were identified as Cimex lectularius linnaeus. After a series of comprehensive control measures including environmental cleanup, aerosol elimination, replacement of wooden beds with iron frame beds, and purchase of all-inclusive mattress, the bedbug infestation rate dropped to 5.26%. ConclusionComprehensive control can effectively prevent the breeding and spread of bedbugs. Dissemination and education effort should be strengthened in case of the occurrence of bedbug infestation, together with an implementation of long-term and continuous surveillance and monitoring.

Objective To explore strategies for further subdivision of DRG in gastrointestinal surgery cases,providing references to enhance the differentiation of DRG subgroups.Methods A total of 5 108 gastrointestinal surgery cases were selected from a tertiary grade A hospital and a tertiary hospital in Hubei Province,spanning from January 2019 to June 30,2023,and another secondary hospital's data from 2020 and 2021.It employs single factor analysis and multiple linear regression analysis to identify factors influencing case costs.Additionally,the opinions of nine clinicans were gathered regarding factors affecting resource consumption in gastrointestinal surgery cases.The four selected case groups were further subdivided considers the peak characteristics of disease costs.It compares subdivided groups with the DRG Payment Subgroups Scheme(Version 2.0).Results Groups GB1,GB2,GC1,and GC2 were subdivided into 7,4,7,and 6 DRG groups,respectively.The coefficient of variation of each subdivided DRG were reduced,homogeneity was increased,and inter-group differentiation was increased.The results were consistent with the DRG Payment Subgroups Scheme(Version 2.0).Conclusion Based on DRG grouping,the DRG groups can be further subdivided according to the peak characteristics presented by case costs.This subdivision strategy is helpful to provide new ideas for case grouping of Medicare payment.

AIM To study the chemical constituents from the sticks and leaves of Croton cascarilloides Raeusch.and their biological activities.METHODS The 95％ethanol extract from the sticks and leaves of C.cascarilloides was isolated and purified by MCI,silica gel,Sephadex LH-20 and semi-preparative HPLC,then the structures of obtained compounds were identified by physicochemical properties and spectral data.LPS-induced NO RAW264.7 cell model induced by LPS was used to evaluate its anti-inflammatory activity in vitro.GES-1 injury model induced by taurocholic acid was used to screen the gastric mucosal protection activity.RESULTS Fourteen compounds were isolated and identified as bullatantriol(1),(-)-boscialin(2),(+)-dehydrovomifoliol(3),3-(hydroxylacetyl)-indole(4),pinoresinol(5),3,7-dimethyl-octa-1,7-diene-3,6-ol(6),(+)-syringaresinol(7),curcasinlignan B(8),cleomiscosin C(9),cleomiscosinD(10),2,6-dimethyl-octa-1,7-dien-3,6-diol(11),vanillin(12),vanillic acid(13),methyl vanillate(14).Compound 4 had certain anti-inflammatory activity,with IC50 values of 73.62 μmol/L.The protective rates of 25 μmol/L compounds 1-4,6,9-12 and 14 on gastric mucosal epithelial cells were 30.07％,34.18％,23.91％,30.92％,17.51％,19.69％,31.76％,22.46％,30.56％and 14.49％,respectively.CONCLUSION Compounds 1-14 are isolated from this plant for the first time.Compound 4 shows anti-inflammatory activity,1-4,6,9-12 and 14 show different degrees of gastric mucosal epithelial cell protective activity.