Electroencephalogram (EEG) is a non-invasive, high temporal-resolution technique for monitoring brain activity. However, affected by the volume conduction effect, EEG has a low spatial resolution and is difficult to locate brain neuronal activity precisely. The surface Laplacian (SL) technique obtains the Laplacian EEG (LEEG) by estimating the second-order spatial derivative of the scalp potential. LEEG can reflect the radial current activity under the scalp, with positive values indicating current flow from the brain to the scalp (“source”) and negative values indicating current flow from the scalp to the brain (“sink”). It attenuates signals from volume conduction, effectively improving the spatial resolution of EEG, and is expected to contribute to breakthroughs in neural engineering. This paper provides a systematic overview of the principles and development of SL technology. Currently, there are two implementation paths for SL technology: current source density algorithms (CSD) and concentric ring electrodes (CRE). CSD performs the Laplace transform of the EEG signals acquired by conventional disc electrodes to indirectly estimate the LEEG. It can be mainly classified into local methods, global methods, and realistic Laplacian methods. The global method is the most commonly used approach in CSD, which can achieve more accurate estimation compared with the local method, and it does not require additional imaging equipment compared with the realistic Laplacian method. CRE employs new concentric ring electrodes instead of the traditional disc electrodes, and measures the LEEG directly by differential acquisition of the multi-ring signals. Depending on the structure, it can be divided into bipolar CRE, quasi-bipolar CRE, tripolar CRE, and multi-pole CRE. The tripolar CRE is widely used due to its optimal detection performance. While ensuring the quality of signal acquisition, the complexity of its preamplifier is relatively acceptable. Here, this paper introduces the study of the SL technique in resting rhythms, visual-related potentials, movement-related potentials, and sensorimotor rhythms. These studies demonstrate that SL technology can improve signal quality and enhance signal characteristics, confirming its potential applications in neuroscientific research, disease diagnosis, visual pathway detection, and brain-computer interfaces. CSD is frequently utilized in applications such as neuroscientific research and disease detection, where high-precision estimation of LEEG is required. And CRE tends to be used in brain-computer interfaces, that have stringent requirements for real-time data processing. Finally, this paper summarizes the strengths and weaknesses of SL technology and envisages its future development. SL technology boasts advantages such as reference independence, high spatial resolution, high temporal resolution, enhanced source connectivity analysis, and noise suppression. However, it also has shortcomings that can be further improved. Theoretically, simulation experiments should be conducted to investigate the theoretical characteristics of SL technology. For CSD methods, the algorithm needs to be optimized to improve the precision of LEEG estimation, reduce dependence on the number of channels, and decrease computational complexity and time consumption. For CRE methods, the electrodes need to be designed with appropriate structures and sizes, and the low-noise, high common-mode rejection ratio preamplifier should be developed. We hope that this paper can promote the in-depth research and wide application of SL technology.

Background: s/Aims: Non-invasive models stratifying clinically significant portal hypertension (CSPH) are limited. Herein, we developed a new non-invasive model for predicting CSPH in patients with compensated cirrhosis and investigated whether carvedilol can prevent hepatic decompensation in patients with high-risk CSPH stratified using the new model. Methods: Non-invasive risk factors of CSPH were identified via systematic review and meta-analysis of studies involving patients with hepatic venous pressure gradient (HVPG). A new non-invasive model was validated for various performance aspects in three cohorts, i.e., a multicenter HVPG cohort, a follow-up cohort, and a carvediloltreating cohort. Results: In the meta-analysis with six studies (n=819), liver stiffness measurement and platelet count were identified as independent risk factors for CSPH and were used to develop the new “CSPH risk” model. In the HVPG cohort (n=151), the new model accurately predicted CSPH with cutoff values of 0 and –0.68 for ruling in and out CSPH, respectively. In the follow-up cohort (n=1,102), the cumulative incidences of decompensation events significantly differed using the cutoff values of <–0.68 (low-risk), –0.68 to 0 (medium-risk), and >0 (high-risk). In the carvediloltreated cohort, patients with high-risk CSPH treated with carvedilol (n=81) had lower rates of decompensation events than non-selective beta-blockers untreated patients with high-risk CSPH (n=613 before propensity score matching [PSM], n=162 after PSM). Conclusions Treatment with carvedilol significantly reduces the risk of hepatic decompensation in patients with high-risk CSPH stratified by the new model.

Background: s/Aims: Non-invasive models stratifying clinically significant portal hypertension (CSPH) are limited. Herein, we developed a new non-invasive model for predicting CSPH in patients with compensated cirrhosis and investigated whether carvedilol can prevent hepatic decompensation in patients with high-risk CSPH stratified using the new model. Methods: Non-invasive risk factors of CSPH were identified via systematic review and meta-analysis of studies involving patients with hepatic venous pressure gradient (HVPG). A new non-invasive model was validated for various performance aspects in three cohorts, i.e., a multicenter HVPG cohort, a follow-up cohort, and a carvediloltreating cohort. Results: In the meta-analysis with six studies (n=819), liver stiffness measurement and platelet count were identified as independent risk factors for CSPH and were used to develop the new “CSPH risk” model. In the HVPG cohort (n=151), the new model accurately predicted CSPH with cutoff values of 0 and –0.68 for ruling in and out CSPH, respectively. In the follow-up cohort (n=1,102), the cumulative incidences of decompensation events significantly differed using the cutoff values of <–0.68 (low-risk), –0.68 to 0 (medium-risk), and >0 (high-risk). In the carvediloltreated cohort, patients with high-risk CSPH treated with carvedilol (n=81) had lower rates of decompensation events than non-selective beta-blockers untreated patients with high-risk CSPH (n=613 before propensity score matching [PSM], n=162 after PSM). Conclusions Treatment with carvedilol significantly reduces the risk of hepatic decompensation in patients with high-risk CSPH stratified by the new model.

Background: s/Aims: Non-invasive models stratifying clinically significant portal hypertension (CSPH) are limited. Herein, we developed a new non-invasive model for predicting CSPH in patients with compensated cirrhosis and investigated whether carvedilol can prevent hepatic decompensation in patients with high-risk CSPH stratified using the new model. Methods: Non-invasive risk factors of CSPH were identified via systematic review and meta-analysis of studies involving patients with hepatic venous pressure gradient (HVPG). A new non-invasive model was validated for various performance aspects in three cohorts, i.e., a multicenter HVPG cohort, a follow-up cohort, and a carvediloltreating cohort. Results: In the meta-analysis with six studies (n=819), liver stiffness measurement and platelet count were identified as independent risk factors for CSPH and were used to develop the new “CSPH risk” model. In the HVPG cohort (n=151), the new model accurately predicted CSPH with cutoff values of 0 and –0.68 for ruling in and out CSPH, respectively. In the follow-up cohort (n=1,102), the cumulative incidences of decompensation events significantly differed using the cutoff values of <–0.68 (low-risk), –0.68 to 0 (medium-risk), and >0 (high-risk). In the carvediloltreated cohort, patients with high-risk CSPH treated with carvedilol (n=81) had lower rates of decompensation events than non-selective beta-blockers untreated patients with high-risk CSPH (n=613 before propensity score matching [PSM], n=162 after PSM). Conclusions Treatment with carvedilol significantly reduces the risk of hepatic decompensation in patients with high-risk CSPH stratified by the new model.

Objective To explore the application of plasma 7 microRNA (miR7) testing in the differential diagnosis of very early-stage hepatocellular carcinoma (HCC). Methods This study is a multicenter real-world study. Patients with single hepatic lesion (maximum diameter≤2 cm) who underwent plasma miR7 testing at Zhongshan Hospital, Fudan University, Sir Run Run Shaw Hospital, Zhejiang University School of Medicine, Anhui Provincial Hospital, and Peking University People’s Hospital between January 2019 and December 2024 were retrospectively enrolled. Patients were divided into very early-stage HCC group and non-HCC group, and the clinical pathological characteristics of the two groups were compared. The value of plasma miR7 levels, alpha-fetoprotein (AFP), and des-gamma-carboxy prothrombin (DCP) in the differential diagnosis of very early-stage HCC was evaluated using receiver operating characteristic (ROC) curves and area under the curve (AUC). In patients with both negative AFP and DCP (AFP＜20 ng/mL, DCP＜40 mAU/mL), the diagnostic value of plasma miR7 for very early-stage HCC was analyzed. Results A total of 64 528 patients from 4 hospitals underwent miR7 testing, and 1 682 were finally included, of which 1 073 were diagnosed with very early-stage HCC and 609 were diagnosed with non-HCC. The positive rate of miR7 in HCC patients was significantly higher than that in non-HCC patients (67.9% vs 24.3%, P＜0.001). ROC curves showed that the AUCs for miR7, AFP, and DCP in distinguishing HCC patients from the non-HCC individuals were 0.718, 0.682, and 0.642, respectively. The sensitivities were 67.85%, 43.71%, and 44.45%, and the specificities were 75.70%, 92.78%, and 83.91%, respectively. The pairwise comparison of AUCs showed that the diagnostic efficacy of plasma miR7 detection was significantly better than that of AFP or DCP (P＜0.05). Although its specificity was slightly lower than AFP and DCP, the sensitivity was significantly higher. Among patients negative for both AFP and DCP, miR7 maintained an AUC of 0.728 for diagnosing very early-stage HCC, with 67.82% sensitivity and 77.73% specificity. Conclusions Plasma miR7 testing is a potential molecular marker with high sensitivity and specificity for the differential diagnosis of small hepatic nodules. In patients with very early-stage HCC lacking effective molecular markers (negative for both AFP and DCP), miR7 can serve as a novel and effective molecular marker to assist diagnosis.

Objective To systematically evaluate the radiation impact of radioactive sources used in online elemental analyzers in cement enterprises on the surrounding environment, and to provide a scientific basis for radiation monitoring and safety management at the application sites of this type of radioactive sources. Methods A statistical analysis was conducted on 15 cement enterprises in Guangxi Province using online elemental analyzers with ²⁵²Cf as the radioactive source. On-site investigation of radiation safety management and on-site monitoring of radiation environment were performed, followed by an evaluation based on the collected data. Results Although the gamma radiation ambient dose equivalent rate and neutron ambient dose equivalent rate increased around the sites using online elemental analyzers with ²⁵²Cf as the radioactive source, they all met the requirements of the Radiological Health Protection Requirements for Instruments with Sealed Sources (GBZ 125—2009). Conclusion Under the current usage and management conditions, the application of this type of radioactive sources has controllable radiation impact on the surrounding environment, and will not pose a threat to public health and environmental safety. However, continuous strengthening of radiation safety management measures and regular radiation monitoring work are still needed to ensure the safe use of radioactive sources, further reducing potential radiation risks and providing strong guarantees for the safe application of radioactive sources in online elemental analyzers in cement enterprises.

Objective: To investigate the cross sectional association between bedroom nocturnal light exposure and objectively measured sleep parameters in college students, so as to provide evidence for promoting sleep health. Methods: From September to October 2019, a convenience sampling method was used to recruit 365 healthy college students from two universities in Hefei, establishing a cohort. Bedroom nocturnal light exposure was measured at the individual level for two consecutive days using a portable illuminometer (TES-1339R; Taishi Corp, Taiwan, China). Sleep parameters were objectively measured over seven consecutive days using wrist worn accelerometers (ActiGraph GT3X-BT, Pensacola, FL). Multiple linear regression models were employed to examine the association between nocturnal light exposure and sleep parameters. Results: Compared to the low nocturnal light exposure (<3 lx) group, the high exposure (≥3 lx) group exhibited significantly lower sleep efficiency[(93.5± 2.7 )%,(92.2±2.9)%, t =3.93], longer wake after sleep onset (WASO)[(24.7±90.3)(29.2±11.2)min, t =-3.66], higher movement index(11.0±3.6, 12.2± 3.8, t =-2.80), and higher sleep fragmentation index(20.5±6.5,23.0±7.0, t =-3.24) (all P <0.01). After adjusting for covariates,multiple linear regression showed that,compared to the low nocturnal light exposure group, the high exposure group had reduced sleep efficiency ( β =-1.15, 95% CI =-1.78 to -0.52), increased WASO [ β (95% CI )=3.94(1.55- 6.33 )], higher movement index[ β (95% CI )=1.05(0.20-1.89)], and elevated sleep fragmentation index[ β (95% CI )=2.35(0.81-3.88)](all P <0.05). Conclusions Light exposure at night negatively impacts college students sleep. Optimizing bedroom lighting management may improve sleep quality in adolescents.

The development and application of processing technology is closely related to the quality of Chinese medicine. Currently， Chinese medicine processing is still in the mechanization stage with limited processing equipment， low levels of automation and intelligence. As a result， the imprecise control of parameters during processing leads to unstable quality of Chinese herbal pieces. However， with the arrival of the big data era and the continuous development of "Internet+"， Chinese medicine processing technology and equipment have been continuously improved and updated， and gradually shifted to the development direction of automation and intelligence. The linkage production technology of Chinese herbal pieces optimizes the separate processing equipment coupling into the production line for continuous manufacture of Chinese herbal pieces， intending to improve production efficiency. The large-scale industrialized production of Chinese herbal pieces tends towards digital technology of processing experience and online inspection technology based on machine vision， electronic nose， and electronic tongue. These technologies are crucial prerequisites for standardizing the parameters of Chinese medicine processing. And further by docking the processing process and equipment with the internet， realizing the intelligent control of the production process is an important process for the transformation and upgrading of Chinese herbal piece industry in the future. In this paper， we summarized the development characteristics of different stages of Chinese medicine processing technology， combed application and development of processing theory， the evolution of processing equipment， and problems in the current industrial development stage of Chinese medicine processing， in order to provide ideas and methods for achieving digital and intelligent innovation of processing technology as well as high-efficient and high-quality production of Chinese herbal pieces.

Objective To study the effect and mechanism of action of Yi Sui Sheng Xue Fang(YSSX)in ameliorating chemotherapy-induced renal injury in mice through The Kelch-like ECH-associated protein 1(KEAP1)/Nuclear factor erythroid-derived 2-like 2(NRF2)signalling pathway.Methods A mouse kidney injury model was induced by intraperitoneal injection of carboplatin(40 mg·kg-1).C57BL/6 mice were randomly divided into blank group(0.9％NaCl),model group(kidney injury model)and experimental-L,experimental-M,experimental-H groups(0.53,1.05 and 2.10 g·kg-1·d-1 YSSX by gavage for 7 d).Keap1 and Nrf2 were determined by Western blot;superoxide dismutase(SOD)and malondialdehyde(MDA)activities were determined by spectrophotometry.Results The protein expression levels of Keap1 in blank group,model group and experimental-L,experimental-M,experimental-H groups were 0.26±0.02,0.64±0.03,0.59±0.01,0.45±0.05 and 0.34±0.02;the protein expression levels of Nrf2 were 0.69±0.06,0.35±0.01,0.36±0.01,0.48±0.02 and 0.56±0.01;the enzyme activities of catalase(CAT)were(572.49±912.92),(334.60±4.92),(402.76±9.80),(475.35±5.21)and(493.00±12.03)U·mg-1;glutathione(GSH)were(2.79±0.06),(0.51±0.01),(0.59±0.07),(1.29±0.04)and(1.70±0.08)μmol·L1;SOD were(477.00±4.32),(260.67±6.13),(272.67±2.87),(386.33±3.68)and(395.00±12.25)U·mL-1;MDA were(3.89±0.02),(7.32±0.03),(6.94±0.14),(4.60±0.01)and(4.34±0.02)nmol·mg prot-1.The differences of the above indexes in the model group compared with the blank group were statistically significant(P＜0.01,P＜0.001);the differences of the above indexes in experimental-M,experimental-H groups compared withe model group were statistically significant(P＜0.01,P＜0.001).Conclusion YSSX can activate Keap1/Nrf2 signaling pathway and regulate the oxidative stress state of the organism,thus improving the renal injury caused by chemotherapy in mice.

Objective To study the pharmacokinetic characteristics of the test formulation of compound lidocaine cream and reference formulation of lidocaine and prilocaine cream in Chinese healthy subjects and to evaluate whether there is bioequivalence between the two formulations.Methods A single-center,single-dose,randomized,open-label,two-period,two-sequence,crossover design was used.This study included 40 healthy subjects,and in each period,test formulation or reference formulation 60 g was applied to the skin in front of both thighs(200 cm2 each side,a total of 400 cm2)under fasting conditions,and the drug was left on for at least 5 h after application.The concentrations of lidocaine and prilocaine in plasma were determined using liquid chromatography-tandem mass spectrometry(LC-MS/MS)method.Pharmacokinetic parameters were calculated using WinNonlin 8.0 software to evaluate the bioequivalence of the two formulations.Results After the application of the test formulation compound lidocaine cream and the reference formulation lidocaine and prilocaine cream on both thighs of the subjects,the pharmacokinetic parameters of lidocaine in plasma were as follows:Cmax were(167.27±91.33)and(156.13±66.86)ng·mL-1,AUC0-t were(1 651.78±685.09)and(1 636.69±617.23)ng·mL-1·h,AUC0-∞ were(1 669.85±684.65)and(1 654.37±618.30)ng·mL-1·h,the adjusted geometric mean ratios were 104.49％,101.88％and 101.89％,respectively,with 90％confidence intervals of 98.18％-111.20％,97.80％-106.13％and 97.87％-106.07％,all within the range of 80.00％-125.00％.The pharmacokinetic parameters of prilocaine in plasma were as follows:Cmax were(95.66±48.84)and(87.52±39.16)ng·mL-1,AUC0-t were(790.86±263.99)and(774.14±256.42)ng·mL-1·h,AUC0_m were(807.27±264.67)and(792.84±254.06)ng·mL-1 h,the adjusted geometric mean ratios were 107.34％,103.55％and 102.98％,respectively with 90％confidence intervals of 101.69％-113.31％,99.94％-107.30％and 99.65％-106.43％,all within the range of 80.00％-125.00％.Conclusion The test formulation compound lidocaine cream and the reference formulation lidocaine and prilocaine cream are bioequivalent.